Devanco Canada - Get The Right Garage Door Opener‎ and Parts

105104

Linear Gate Safety Edge Transmitter

105104 is for adding obstacle sensing for motorized gates or barrier arms.
Using a safety edge transmitter is more economical and discrete than the traditional coiled cord connection method.
The transmitter mounts directly on the gate or barrier arm and wires to a standard exterior safety edge sensor.
Compatible with 310 MHz Stanley receivers and Model 109950 302850 and 309013 receivers.
Activates receiver for stop or reverse entrapment
No cables or coiled wires

.......more details

Installation Manual

84284

Marantec Logic Board for Non-EOS Models

For use on M Line- M-4500 and M-4700 models.
For use on Q Line - 7500 and 7700 models.
For use on Martin DC 3500E and DC 3700E models.
Replaces 8054216. Special programming needed. Instructions included

OVERLOAD002

Manaras Telemecanique Overload 3-ph 1.2 - 1.8A

Telemecanique # LR2K0307

MD-00030

Roller Chain #40 10' per Pack

Includes (1x) master link

RELAY024

Manaras Relay DPDT 24VAC

Used in all heavy-duty operators as well as MLT and Opera-MH/MJ

VBELT_4L370

Manaras VBelt 4L 37"

Used on MJH models from 1980 - 2000

LA400DC-S

LiftMaster Residential 24VDC Linear Actuator Secondary Arm Only New Model

Secondary Arm Only for LA400
All new arms are backwards compatible with the previous model but the LiftMaster branding is different

Installation Manual Manuel d'Installation Sell Sheet

41D605-1

LiftMaster Electric Motor 80kg/100kg

For retail models: WD952KD HD800D and WD952LD

Replacement Instructions Instructions de remplacement

414001

Linear 4-Channel Multi-Code Visor Transmitter 300 MHz

Compatible with 300 MHz Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches
Power: 9-volt battery
Codes: 512 codes for each channel (set by dip switches)
RF frequency: 300 MHz

.......more details

Installation Manual

97-75000

DOT-C2 Reflective Tape 24" x 2" W 6" Red x 6" White Pattern

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

IG2-P1

Miller Edge Pair of Pedestal Mounts for IG2 Eyes

Flexible spring loaded pedestal stand
30 degree of flex
27" high from bottom base to photoeye

10TD433HH1

BEA 1-Button Digital Transmitter 433 MHz

Transmitter offering means of activation of automatic doors with extended hold feature.
Delay and no-delay learn modes for either instant of delayed activation for sequencing doors.
Operating temperature: -10 to 55C
Controls one 10RD433 receiver.

HBFST-BC

Keyed Control Switch with Best Cylinder

NEMA 1
TAMPERPROOF FLUSH MOUNT
TWO POSITION (OPEN-CLOSE) WITH STOP BUTTON
CENTER RETURN
SINGLE GANG BACK BOX
STAINLESS STEEL FACEPLATE

.......more details

12-19504

LiftMaster Flanged Bearing 1" Keyed

27-48-160

Extension Spring 8' Door - 160 lbs Brown

Single - Loop
27" long 48" stretch 160 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

H12G06-SS

Hinge #6 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

H12G05-SS

Hinge #5 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

H12G03-SS

Hinge #3 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

16FT-TROLLEY-SET

LiftMaster 16ft Double Angle Rail Set for Comm. Trolley Ops 10-5816-P (2 pcs) *Actual length 227"*

Double Angle Rails for doors up to 16' high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
Actual Length 18' 11"

9003-13FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle Bolt On 13' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

MWTA12

Miller Edge Transmitter with Audible Alarm Small *** No Longer Available

The MWTA12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes with an Audible Alarm feature that activates when the battery is running low and needs to be replaced.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided.

.......more details

Installation Manual Sell Sheet

342.115

Whiting Intermediate Panel Tongue & Groove 11-1/2" x 96" Price on Request

Standard size panel primer only

342.155

Whiting Intermediate Panel Tongue & Groove 15-1/2" x 96" Price on Request

Standard size panel primer only

SOLID_SHAFT_21'

Solid Shaft 1" Keyed 21 ft Galvanized

Actual length is approx. 21'-1"

5X15SC50

Devanco Loop 5' x 15' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

GH751-L5

LiftMaster Gearhead with Brake 3/4HP 115/230V 1P L5 ***No Longer Available

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

PL-B11-ARM-STR

Lynx Straight Arm for Proline Operator

Used on Proline residential garage door openers

50445

Doorlec Mushroom Push-Button Red with 2 Contacts

Capable of opening two doors or gates simultaneously
NEMA 4 Enclosure

.192-2-RH-C

Torsion Spring 192 x 2" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .192 ID: 2" Length: 12 ft

IRB-BR

EMX Industries Brackets for Photoeyes Sold as a Pair

Brackets are predrilled
Used for PC-3 P41 P44 P45 and IRB-4X photoeyes
Made of metal
Sold as a pair
9" x 3" L-Shaped

BK314

Jamb bracket J-14 #14 12 gauge

Sold by the piece
Height 5.50" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

BK313

Jamb bracket J-13 #13 12 gauge

Sold by the piece
Height 5.25" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

BK311

Jamb bracket J-11 #11 12 gauge

Sold by the piece
Height 4.75" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

SOLID_SHAFT_16'

Solid Shaft 1" Keyed 16 ft Galvanized

Actual length is approx. 16'-1"

SOLID_SHAFT_12'

Solid Shaft 1" Keyed 12 ft Galvanized

Actual length is approx. 12'-1"

50430

Doorlec Push-Button Station 2 Button Nema 4/12

Open / Close Nema 4/12

9150000627

1/8" Stops ONLY 100/pkg

Stops only 100 per pack

MOD074

Manaras Hand Crank Modification

For manual operation with a hand crank instead of a chain hoist.
Hand crank hook and eye outlet is supplied.
A 5/8" rod or pipe (SHAFT002) is required but not supplied
SHAFT002 should be ordered separately and desired cut-to length specified at time of order.
This modification is also available for in the field upgrade - see MODKIT074
This modification applies to OGH and MGH operators

.......more details

CARRIAGE006

Manaras Trolley Carriage Aluminum Die Cast

OPJ-6214-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 240V 1 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

CLUTCHPAD008

Manaras Clutch Pad 1" ID 4" OD

Replaces CLUTCHPAD002

OMH-6112-ECB-LH

Manaras Medium-Duty Jackshaft Op. 1/2 HP 120V with Elect. Circuit Board Left Hand

Designed for use on standard high and vertical lift sectional doors
Can also be used on small rolling doors and grills
Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
Mechanical brake
Hoist-a-matic self-engaging hoist for manual chain operation
Hoist on Right Hand is standard

.......more details

Installation manual Sell sheet

OPH-6212-ECB

Manaras Opera-H 1/2HP 240V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

Installation Manual Sell Sheet

36664R

Genie Screw Drive Shuttle Assembly

Compatible with the following models: GPower 900 TriloG 1200 TriloG 1500 PowerMax 1200 PowerMax 1500
Works with Screw Drive carriage assembly part # 37845R - sold seperatelty

27220A

Genie Limit Switch Chain Drive

Compatible with the following operators: PMX700 GPS700-IC PMX1200 GPS1200-IC PMLD500 PMX500-IC/B PMX300-IC/B IC250/B PMX60-65-70-75-80-85-300IC-500IC-IC250 among others
For chain drive models with internal limits

34516R

Genie Chain Glide Inner Slide ML Series with Magnet

For ML Series with Magnet: 350ML 500ML 700ML 800ML

33950R

Genie Up Limit Switch Assembly 66 " Wire

For use on 7'6" rail assemblies.
For Genie Excelerator models and Overhead Overdrive models
Open / Up magnetic limit switch

7001-10-W/B

Commercial Side & Top Weather-Strip 10' Long - White/Black (WB)

White galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

7001-8-W/B

Commercial Side & Top Weather-Strip 8' Long - White and Black (WB)

White galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

797

Fasteners Clevis Pin 5/16" x 1" 100/Bag

BRACKET112

Manaras Wall Mount Stud Bracket

This Wall Mount Bracket can be used with all Manaras Wall Mount commercial operators except the MRGH and MGH models
Will not work will Trolley Operators

1A4324-EZ

LiftMaster Steel Hood EZ Mount Bracket with Adaptor Plate (75-12362/ 001A4324)

Heavy-gauge steel bracket with EZ mount adapter plate mounting bolts nuts and washers.
Adapter plate holds mounting bolts in place for ease of mounting.
Cannot be used with Model GH 3HP.

MA025

LiftMaster Padded Barrier Arm Yellow 12ft

For use on Mega-Arm gate operator

Additional arm accessories

29-10338

LiftMaster Capacitor 70uf 230V 60Hz

For models: MJ5011 MH5011 HMJ5011 MT5011 and BMT5011

831T

Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz 107483 *** To extent of inventory

Open/Close/Stop stationary remote for 1 door.
Designed for commercial automatic door and gate operator applications.
This transmitter can operate a single receiver connected to one operator
Compatible with 3-channel Allstar and MVP receivers
Easy access to battery and coding switch
Power: 9-volt battery

.......more details

Programming Instructions

TR490

Waist-High Pedestrian Tripode Turnstile with Heater & Pictograms

The TR tripod turnstiles are very robust products that can function equally well inside and outside buildings.
They are particularly well-suited to the needs of access control at leisure centers stadiums and factories.
Well-built for increased durability tripod turnstiles efficiently control high throughput.
Bi-directional turnstile made especially for quick access control in areas with high traffic but limited space
Non-removable stainless steel arms to prevent vandalism
Durable corrosion-resistant heavy-duty mechanism for extended service life

.......more details

754

Fasteners Self Drill & Tap Tek Screw 5/16-12 x 1" (#4PT) 1000/Box ** NLA Offer 108207

Indented Hex Washer Head
7/16" Head
Max RPM = 2000

SCRUBS-PAIL

Scrubs Hand Cleaning Towels 72 Towels per Pail*** Special Order Sold by Quote Only

The citrus-based formula and textured towel combination works to loosen dissolve and absorb the toughest materials
Each pail contains 72 towles
6 pails per case

G65-19084

LiftMaster Thermostat Control Heater Fin Type for 208V-460V Gate Operators ** Discontinued

Heater used in BG type gate operators

Installation Manual

7001-18-BLACK

Commercial Side & Top Weather-Strip 18' Long - Black (Code B)

Black galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

767

Fasteners Lag Screw Hex Washer Regular Profile 1/4" x 1" 1000/Box ***NLA

7/16" head

775

Fasteners Hex Head Bolt 1/4-20 x 3/4" 1000/Box

1/4" bolt has 7/16" head
Max torque = 6
Full thread

BK104

Spring Anchor with Bearing 3-3/8" 13-gauge Sold per Piece

For residential applications. Use CBS-338 for commercial / industrial applications
Zinc plated 11-guage steel
1" bore bearing installed
Single clipped end

37028C.S

Genie Control Board for Model 2022 ** Repl. by 39537R.S (no cover)

For ReliaG 800 model 2022 gaarage door opener ◾ Genie 37028A Control Board for Genie Models 2022 2024 and 2042 Chain / Belt Drive Openers ◾ Works for the following models only: ◾ ReliaG 800 (2024) PRO Series 1 Piece Rail ◾ QuietLift 800 (2042) ◾ ChainLift 800 (2022)

114

Lag Screw Hex Washer Head 1/4" x 1-1/4" 1000/Box

7/16" head
Serrated

STAR450-390

LiftMaster Commercial Access Control Receiver 390MHz *** To Extent of Inventory

Rapid learn feature programs multiple transmitters in just seconds
Ideal for gated communities parking lotsand garages.

Programming Instructions Sell sheet

MT22-BLACK-RH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

K75-10387

LiftMaster Slider Assembly for APT

751

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 1" (#2PT) 1000/Box

7/16" Head
Indented hex washer head
Max RPM = 2000

CH751L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 115/230 VAC Logic 5 Right Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with either CPS-UN4 or CPS-RPEN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

BC096.2

Whiting ColdSaver Door Bright Stainless Steel Clad

Include: Track Balancer Standard Hardware and side top & bottom seals.
Replacement for Utility Trailer s/n CS39865

26-14623

Truck Door Top Panel (13" x 98") for Todco DryFreight

These panels are cut to an extra wide width to fit wider vehicle applications
Interlocking tongue and groove design for weather-tight joint and proper alignment.
.75" thick 7 ply exterior grade medium density plywood
Primer finish

71B120G

LiftMaster Brake Kit 115V with Solenoid Field Install SL585 and SL595

Instruction Manual

7001-16-SANDSTN

Commercial Side & Top Weather-Strip 16' Long - Sandstone (D)

Sandstone galvanized steel with sandstone dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Taupe
Full case quantity only (10)

MB-01001

Micanan Electric Motor Only 1/2HP 110/220V 1PH

Base Mount motor O.D.P. FR56
Used on Micanan's T TB APT J EJ H EHJ HHD & SD

165-B

Fusible Link For Loads 1 to 10 lbs

Length is 1.4328" width is .563"
Distance between center is .938"
Priced per each
Fire rated at 165 degrees Fahrenheit

MOFT20-M14-8

Carlo Gavazzi Photoelectric Sensor Thru-Beam Transmitter

Maximum sensing distance is 20 meters
11-pin
Waterproof for harsh environment i.e. water dust steam etc.
To be used with amplifier series S142.
Supplied with 15 m of shielded cable.
For receiver unit order part no. MOFR-M14-8.

.......more details

Installation Manual

CONSD24V

Reversing Contactor Struthers Dunn 24V

Struthers-Dunn # A275KXX90

41A6104

LiftMaster Cable Tension Monitor

Used on jackshaft model residential garage door openers

K72-19979

LiftMaster Clutch Shaft Kit 2005 +

Assembly includes: Clutch shaft keyed flange bearing dual sprocket 32/14 14-tooth sprocket E-ring compression sprocket chain wheel assembly pulley assembly chain guide assembly shim & thrust washers copper bushing 12-10882 and roll pins

27-20100

Truck Door T-Style Spring Assembly 60" Long

Wire thickness: .24"
Inside diameter: 1.75"
Includes bolt plug and winding plug wound onto spring for stronger design
Cross reference: T#51042 W#2701

G90-503000

LiftMaster Non-Resettable Counter 24VAC (50-12862)

Increases one number each time current is applied
Connects to the 24 volts of contactor coil
Simple 2-wire connection
Same as 50-12862

71-REDGRN-HCT

LiftMaster Red/Green Warning Light Box **DISCONTINUED

Signals if door is moving or stationary
Compatible with model HCT

Installation Manual

CLUTCH-SHAFT-AS

Lynx Complete Clutch Shaft Assembly for HDC Operators 3/4" x 17-1/2"

Fits all HDC operators - waterproof or not.

TH827-24V

Erone 7-Day Timer 24V

24V AC/DC input voltage with battery back-up
One "NO" contact and one "NC" Contact
Up to 8 ON and OFF switches a day (56 per week)
Easy to read LCD Display
Manual override button
Ideal to keep a gate open during the day

.......more details

Programming Instructions Instructions de programmation

TAC1

LiftMaster Single Line Telephone Access Control with Radio

The TAC1 can be connected to two devices such as a door or gate using the two independently controlled relays or wirelessly using Security+ technology standard or any combination of the two.
Provides wired communication and secure access control at the gate or door.
Measurements: 6" h x 8.75" w

Installation Manual Programming Instructions

36163R

Genie Dual Frequency Intellicode Receiver 315 MHz & 390 MHz

For Genie Intellicode Rolling Code remotes Or Overhead Door Code Dodger remotes using the 315 or 390MHz frequency.
24-Volt 3-Wire Connection For Garage Door Opener And Gate Openers.
Accepts Up To 8 Genie Intellicode Or Overhead Door Code Dodger remotes on 315 or 390MHz Frequency. Note: Will not work with the older code switch type of remotes.

69625

Marantec Programming Connector

Programming connector for use with M3 remotes and Wireless Keyless Entry. Also used with M13 Wireless Keyless Entry

M3-2312

Marantec 2-Button Transmitter 315 MHz 97243/122436

Same as part # 65892 97243 122436
Includes battery CR2032
Made in Germany

Instructions

MU22-2WIRE-RH-B

Miller Edge MU22 2-Wire Right Hand Black - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty