Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
28301

Insert Bearing Pillow Block Hy-Speed 1"

  • ASPP-205
K20-1075B2LPH24

LiftMaster Electric Motor 3/4 HP 115V/208V/230V 1Ph Logic 5

  • Standard base mount 3/4 hp motor for new L5 operators
  • Also known as: 20-1075B-2LP K20-1075B-2P-H24 K20-1075B-2LP
MS00005

Micanan Trolley Track 12-ga 14'-6" L Per Set ( Includes 2 Angles Only)

  • Track only- no chain or hardware
TA-2-S/L-1200

Assembled Track Set 2" Comm 14g Bracket Mount for 1-3/4" Door Std Lift 12" Radius

  • Includes horizontal and vertical tracks
SD755L5-LH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 575V 3PH Left Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
Installation manualManuel d'installationSell sheetBrochure
25-10105

Truck Door 1" Steel Roller 3.25" Shaft Length for Todco Roll-Up Doors

  • Zinc plated Hardened shaft and raceways
  • Seven roller ball design
MM00158

Micanan Solenoid Lever HR Left

50-HERK-RC2

Hercules Infrared Programming Remote Red (50-HERK-RC2)

  • Conveniently choose from 8 different preset comfort functions to adjust detection fields mounting heights relay hold interval cross traffic optimization direction recognition people/vehicle separation slow motion detection turn on/off filter functions open the door manually and much more
  • Bidirectional
  • Fine-tune the motion detector from the ground without guessing if all the settings have been received by the sensor
Z9006

Shaft Key Stainless Steel Straight 3" x 1/4"

  • 3" Straight Key
  • Stainless Steel
CP-MO-34-1231WP

Lynx Electric Motor Base Mount 3/4 HP 110V 1 Ph TEFC

  • Electric motor only
MG00004

Micanan Belleville Washer 13/16 ID x 1-3/16 x 1/8 (8 required per operator)

  • PRO-H/HB operator parts
  • 6 required per operator
MK00642-NM

Micanan Full Feature Circuit Board with Contactor Interface Non-Monitored 575V (MK00737)

  • For all HP - 575V all voltages 1.5 2 3 & 5HP
.375-6-R

Cut-to-Length Torsion Spring .375 x 6" Right Hand Wound Yellow/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
PRO-HB-5011U-LH

Micanan 1/2HP 115V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
27-24417

Truck Door Dual Torsion Spring Assembly 96/35 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 96" Spring Length: 35" Wire diameter: .187 Winding cone color: White
MX00137

Micanan PRO-APT Trolley Carriage with Auto Re-Engage Feature (MX00171) *** NLA

  • New part number is MX00171
DM54LC-COATED

Cable Drum High Lift 54" 400-54HL Specialty Coated Pair

  • Use for Commercial Highlift Doors
  • Maximum Door Height 120" + Highlift
  • Maximum Highlift 54"
  • Lifting Weight Per Drum 275 lbs.
  • Resists Chemical/Moisture Corrosion
  • Abrasion Resistant
    • .......more details
MP00064

Micanan Track and #41 Chain for 12' h Door *Actual length 174"*

  • For 3/4 & 1 HP Micanan trolley operators
MP00087

Micanan Track and #41 Chain for 7' h Door *Actual length 114"*

  • For 3/4 & 1 HP Micanan trolley operators
MWT12

Miller Edge Transmitter RF in Nema 4 Enclosure *** To Extent of Inventory

  • The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
  • Response time: nominal 30msec.
    • .......more details
41D96-1

LiftMaster Light Lens for 8500

  • Also known as: 108D96-1 41D96-1 108D0096-1
MD00413

Micanan Flex Coupling Lovejoy 3J x 3/4"

WHITING-PANEL

Whiting Special Order Replacement Panel Only Price by Quote Only

  • Special order to customer's specs
PRO-H-5011U-LH

Micanan 1/2HP 115V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
MT22-BLACK-U

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot Universal Outlet

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
MK-00430

Micanan Capacitor 240V/250V 70 Mf

  • For limited duty 110V operators
MK-00398

Micanan Capacitor 370V 20 Mf

  • For limited duty 220V operators
.262-334-L

Cut-to-Length Torsion Spring .262 x 3-3/4" Left Hand Wound Red/Yellow

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.273-334-L

Cut-to-Length Torsion Spring .273 x 3-3/4" Left Hand Wound Orange/Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.273-334-R

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Orange/Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
MU22-2WIRE-E-G

Miller Edge MU22 2-Wire End Gray - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
MU22-2WIRE-LH-G

Miller Edge MU22 2-Wire Left Hand Gray - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
MU22-2WIRE-RH-G

Miller Edge MU22 2-Wire Right Hand Gray - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
PRO-HHD-7553U-R

Micanan 3/4HP 575V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 3/4 HP575V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation manualSpecification sheet
RESET010

Manaras Resettable Overload Fuse 13A 1 Phase

9150000626

3/32" Stops ONLY 100/pkg

  • Stops only 100 per pack
CABLE_1/4SS-250

Cable 1/4" 7x19 250' Stainless Steel

25-01064

Truck Door Stainless Cables 97" 1/4" eye 7x7 Pair for Roll-Up Doors ** To extent of inventory

  • Works with both Whiting and Todco doors
  • Cable size: 1/8 "
  • Nylon eye ends are used on 1/4" & 7/16" eye cables which give superiour strength and corrosion resistance
28-00114

Truck Door 1" Std Vert. Track and Angle Assbly J Style Roadside (LH) 120" Todco Style

  • For Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes J-style channel mounting angle with track and operator bracket
  • Fits door sizes 101 - 114" high
  • Cross ref: T #49014-2 T #41034-2 & W #4045
1005-2-14

Aluminum Bottom Retainer U-Shaped 14' Long**Actual Length 14'2"***

  • For door thickness 2"
ME00001

Micanan Limit Shaft 3/8-1/2 x 9.75"

25-60007

Truck Door W-Style End Hinge Pin Package Set 50/Pkg

  • Pin packaged set consists of 50 x 1/4" pins only
  • Steel construction Zinc plated
FRONTIDLER010

Manaras Front Idler Assembly #41

.312-334-L

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
MWC-32

Wheel Chock MWC-32 Rubber with Eye Hook

  • Good stability over others in this class
  • Long Lasting 80 Durometer rubber
  • Size: 6-1/2" wide x 9-1/2" long x 8-1/2" high
34030308

Polyester Lifting Sling Type 3 Eye / Eye 3" x 8'

  • 2-ply
  • Minimum tensile strength of 9800 lbs per inch of width
38072020

Tie Down Chain Assembly GR 70 5/16" x 20' Hook / Hook

  • Boron manganese steel heat treated chain
  • Hook on both ends
  • WLL LBS : 4700
38079001

Agri Safety Chain GR 70 3/8" x 69"

  • Min. strength: 20200 lbs
  • Includes hook joiner link & tag
108D79

LiftMaster Light Lens 108D0079M

  • Replaces 108D68 and 108D68-1
92-00005

Truck Door Hex Nut 5/16"-18

  • Cross ref: W #10.1033.2 for both #2376 & #7176 balancers
M-18

Molded Rubber Bumper Black 18" L x 10" W 4" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • 4-1/2" depth
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles. and will not warp rust rot or harden.
    • .......more details
CHS401-114

Chain Hoist Shaft Mount 1-1/4" Shaft 4:1 JR Torque Force (126685)

  • Shaft Mounted Junior Hoist
  • 4:1 Reduced Drive
  • Sprocket: 41B36. Bore size: 1-1/4" diameter
  • Cross Reference: OMI 4020
  • Requires minimum 3/8" center line offset.
  • Set includes: 26' of hand chain 22" of #41 roller chain Chain keeper (2) shaft collars 1/4" square key and a wall stabilizer bracket.
    • .......more details
Sell sheet
TRACK-SET-2LHR-R

2" Tracks Set 7'-0" Low Headroom 1-3/4" Door Clips for Wood Frame R12 Torsion Rear

  • Complete set - torsion rear
344

Cable Clamps Galvanized 5/16" Sold per piece

  • Galvanized malleable cable clip
.331-514-L

Cut-to-Length Torsion Spring .331 x 5-1/4" Left Hand Wound Red/White

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
  • For spring filler use part no. SPRING-FILLER
.243-258-L

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.243-258-R

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
STRUT-2-1/4-16'-NH

Door Strut 2-1/4" Non Hemmed 16ft Long

  • Reinforcement bar 2-1/4"
ALUM-431

Aluminum 24" x 100' Spool Bright White / Blanc Pur # 431

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Aluminum on the reverse side
  • Gentek # 431
Colour chart
.343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
GAREX-EB-PLATE

Garex End Bearing Plate 3-3/8" Special Order

25050

Doorlec Explosion Proof 3-Btn Pushbutton Control Station

  • CSA and UL labeled station
  • Three button O/C/S Nema-7/9
  • Surface mount
  • Rated: Class 1 Division 1 Groups C.D.E.F.G.
K94-37236

LiftMaster Universal Solar Harness Kit

  • For 7 Ah and 33 Ah batteries
GD-STEND-18D

End Cap Steel 18G 18" Double 1-3/4"

1058050002

Overhead Limit Cam Snap On for OHD Chain Model

  • For Overhead models #456 #551 #556 and the #65 series
  • Also called Limit Actuator
  • 105805-0002
MD-00248

Sprocket 50B28 x 1" 1/4" KW 2SS 5/16"

FCC316-500

Cable 3/16" 6x19 Galvanized Fiber Core 500ft

  • For high-speed doors
  • 3/16” 6x19 galvanized
  • Polypropylene core to help prevent wear and increase flexibility
  • High life cycle wire rope for rapid doors
  • Lubricated during production for extended life
  • 500 feet per roll
    • .......more details
7144.96

Whiting Bottom Aluminum U-Channel For Coldsaver 96" long

  • Bottom seal sold separately
R5220

Sheave Strap 3"

  • Sheave strap also known as fork only
  • Same as part number 302
MB-01003

Micanan Electric Motor Only 1/2HP 110/220V 1PH C-Flange TEFC 56C

  • C-Flange TEFC electric motor
  • Fits models: GT GH GHC & GSD
BL-09

Barlock Kit Complete for 9ft Wide Door Kit includes hardware bag

  • Kit includes hardware bag and bars (55-1/2")
Assembly Manual
770

Fasteners Hex Serrated Flange Head Bolt 3/8-16 x 1" 1000/Box

  • Zinc
  • Grade 5
347

Cable Clamps Galvanized 1/4" Sold per piece

  • Galvanized malleable cable clip
MIRM-T2

Miller Edge Patriot 2 Photo Eye Monitored 30ft Non-Contact ** NLA

  • Attaches directly to a Sectional door.
  • The photo eyes travel below the door during the closing cycle.
  • Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
  • The Patriot2 non-contact system consists of thru beam photo optics.
  • Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
  • The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.
    • .......more details
23-20088

LiftMaster On/Off Switch 120V 15A

  • Also known as: SN5530039 MA019
K20-3075M-5

LiftMaster Electric Motor 3/4 HP 575V 3P BM/CF ** Replaced by K20-3075M-5-H25

  • Also known as: 20-3075B-5 2030755 K20-3075B5 K20-3075M-5
RBH101L5-RH

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation manualManuel d'installationSell sheet
AOMRON

Omron Heavy-Duty Retro-Reflective Photo Eye 110VAC/24V 40ft Range

  • 24-240 VAC/DC
  • 35mA/125mA at 24VAC
  • 20mA/60mA at 110VAC
  • UL listed to UL325 standards
  • NEMA 3 4 12 Outdoor Rating
  • 40 ft. sensing distance
    • .......more details
7001-10-CHARCOL

Commercial Side & Top Weather-Strip 10' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
7001-7-CHARCOAL

Commercial Side & Top Weather-Strip 7' Long - Charcoal 7001-HH (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
CP-ARM-NEW

Lynx Auto Re-Connect Carriage Arms Only New Style 14-1/2"

  • Arms only for CP-CRG-NEW
K002B0821-1

LiftMaster Transformer for EL1SS and EL25

  • 120 volt input power plugs into a standard outlet
  • 16VDC output 2.5 amps
GAREX-READY

Garex Ready to Install Door Special Order

  • specify size color details when ordering
  • Please call for pricing
MGH-6114-ECB-RH

Manaras 1 HP 120V 1P Jackshaft with Elect. Circuit Board Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
Installation manualSell sheet
ALUM-523

Aluminum 24" x 100' Spool Slate / Charbon # 523

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 523
  • Reverse side is #431 Bright White
Colour chart
CB-1.097

Whiting Stainless Steel Cable 97" L with Plain Grommet 5/16" Eye

5001-10-BLACK

Residential Side & Top Weather-Strip 10' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
5001-9-BLACK

Residential Side & Top Weather-Strip 9' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
1104-18'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 18' Long - Light Bronze (F) **NLA

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Full case quantity only (12).
1104-9FT-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 9' Long - Light Bronze (F). ***NLA

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
BT503L5

LiftMaster 1/2 HP 208-230V/460V 3p Commercial Trolley Operator with a Brake Logic 5 ***No Longer Available

  • Low profile trolley operator with brake installed
  • Comes with #48 roller chain
Installation manualManuel d'installationSell sheetBrochure
60-7252

Wheel Chock Wall Bracket 14"w x 8"h x 4-1/2"d Painted Grey

  • Wall bracket only
  • 4-1/2" projection
744

Fasteners Pan Head Tek Screw 3/4" long #8 Head 1000/Box

  • 8 x 3/4 Pan Socket Tek Zinc
E/BLOP/128

Double Channel Loop Detector- factory installed on logic

Q084

LiftMaster Cam Lock and Keys HCT K80-50142

  • Same as K80-50142
  • Fits model HCT
  • Comes with 2 keys
25-42-280

Extension Spring 7' Door - 280 lbs Gold w/ clip

  • Double - Loop
  • 25" long 42" stretch 280 lb load
  • Sold individually
  • Rated for 10000 cycles
053158

Rotating Beacon 4" Amber 12-110V DC

  • IP Protection: IP56
  • -30 degree celsius to + 50 degree celsius extreme temperature reliability
  • small format only 2.5" wide
28-00290

Truck Door 1" Std Vert. Track and Angle Assbly Roadside (LH) 96.5" Todco Style

  • For Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes J-style channel mounting angle with track and operator bracket
  • For door opening less than 90" high
  • Fits door sizes 72 - 90" high
  • Cross ref: T #49014-2 T #41034-2 & W #4045
    • .......more details
28-00190

Truck Door 1" Std Vert. Track and Angle Assbly Curbside (RH) 96.5" Todco Style

  • Fits Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes J-style channel mounting angle with track and operator bracket
  • For door opening less than 90" high
  • Fits door sizes 72 - 90" high
  • Cross ref: T #49014-1 T #41034-1 & W #4046
    • .......more details
OTBH-6233-1-CON

Manaras Trolley Operator 3/4 HP 208V 3 Ph Contactor Model

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation manualSell sheet