Devanco Canada - Get The Right Garage Door Opener‎ and Parts

.283-2-RH-C

Torsion Spring .283 x 2" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .283 ID: 2" Length: 12 ft

.273-334-L-C

Cut-to-Length Torsion Spring .273 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

111883.0001

Overhead Logic Board for RMX

Replacement circuit board kit for the Overhead Door RMX commercial operator.
Replacement circuit board for the Overhead Door RMX commercial operator. UL 325 2010 compliant.
This circuit board replaces part #110955.0001

33106

Overload 5.50 to 8.50A

2X4PO50

Devanco Loop 2' x 4' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

MP00056

Micanan Track and #410 (#48) Chain for 12' h Door *Actual length 174"*

CB18A0500

Cable 1/8" 7x7 500' Galvanized

Galvanized cable 1/8" 7x7 500ft spool.

Comparison charts

PROBE-100

EMX CARSENSE-101 Direct Burial Probe with 100' Lead Wire

Wand only
Requires CS101 (Carsense-101)

26-40039

Truck Door Offset U-Channel Seal Retainer 98" Long for Whiting DryFreight Doors *** Obsolete

Aluminum extrusion construction.
Retainer is offset to allow header clearence with seal when door is in open position.
For use with offset bottom seal #26-40045

OMJ-6112-ECB

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board

Designed for use on standard high and vertical lift sectional doors
Can also be used on small rolling doors and grills
Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
Mechanical brake
Floor level disconnect mechanism which must be engaged for manual push-up operation
14 cycles per hour 50 cycles per day

.......more details

Installation Manual Sell Sheet

JB-02P-W

Miller Edge Junction Box Nema 4

For use with commercial door operators and CPT sensing edges from Miller Edge
Waterproof
Accommodates wire .181 to .312

Installation instructions

G50-FL120-24

LiftMaster Flexible Red Rope Light 24VAC/DC 10ft ** Discontinued

Flex Red Light Strip for BG770 & BG790 Barrier Gate Operators
24VAC/VDC
10' Long

T

Molded Rubber Bumper Black 22" L x 10" W x 12" W 3" Projection Centered Reflector 3-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
Bumper comes with 3 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

.......more details

LLB620-22SF

Steel Faced Laminated Bumper Black 6" Projection L-Shaped 20" x 22" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.

.......more details

5001-WG-14-MOAK

Residential Side & Top Weather-Strip 14' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

K72-33873

LiftMaster Output Shaft Kit MT / BMT

Complete kit includes output shaft bearings sprockets chain roll pin and turac

11-3602_SHAFT

LiftMaster Idler Shaft (1)

Fits SL595
Two are required per operator

TB610-14SF

Steel Faced Laminated Bumper Black 10" x 14" 6 3/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

1104-9FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 9' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

59174.0265X91-1/4

Todco Original Counterbalance Assembly Special Order Price by Quote Only

Made to Order for Serial #30662431-1

UNI-100-142

Uni-Size Bottom Weather Seal 14'2" Long *To extent of inventory*

Fits most standard doors 1-3/8" thru 2" thick
Pliable in all temperatures
Accepts pneumatic or electrical edge
15 pieces per box

HAE00058

Linear LDCO Encoder Board

.363-5-1/4-RH-C

Torsion Spring .363 x 5-1/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .363 ID: 5-1/4" Length: 12 ft

LB412-18

Laminated Bumper Standard Black 12" x 18" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

50018

Doorlec Photo Switch Polarized Explosion Proof Reflective w/Round Reflector

Class 1 Div 1 Groupes CDEFG explosion proof Certified CSA

1104-16FT-GREY

Residential Side & Top PVC Weather-Strip with cap 16' Long - Grey (G)

Grey rigid vinyl retainer with grey flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

14-1056

PVC Roll 12" x .120" x 200ft Roll Low Temp Smooth for Replacement Strip Curtain

Clear and smooth. Suitable for most average applications.
Temperature Range: -34° C to 65° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

4580-304-KYNAR/GY

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Kynar Grey 458-97 *** To Extent of Inventory

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

7001-18-BRONZE

Commercial Side & Top Weather-Strip 18' Long - Bronze (BZ)

Bronze galvanized steel with bronze dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

41D0277-2

LiftMaster Transformer WiFi Non-Battery Backup

For Wi-Fi models without BBU garage door openers; manufactured after 2011
Same as #204D0277-2

32-48-90

Extension Spring 8' Door - 90 lbs Light Blue ** check for availability

Double - Loop
32" long 48" stretch 90 lb load
Springs sold individually

TRACK005

Manaras 1 Piece Galv Track 2x2x16'6 ** 1 pc Only

2 pices are required to make 1 set of tracks
Does NOT include the chain

CH753L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Left Hand

Industrial Duty Hoist Operator with Damp Environment modification
Brake not included.
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

DF104.2

Whiting Dry Freight Door 3/4" with Track Balancer and Standard Hardware

Standard features include: 2-cable balancer with independent springs
Balancer springs treated with rust preventative
All door hardware is E-coated
Spring loaded lock catch
Heavy-duty 2" 13-gauge track
Stainless steel aircraft cables

.......more details

MOD117

Manaras Special Application Chip Modification

GALV-243-2-R

Cut-to-Length Torsion Spring .243 x 2" Right Hand Wound Galvanized White/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

ME00028

Micanan Input Shaft Heavy-Duty

.331-6-RH-C

Torsion Spring .331 x 6" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .331 ID: 6" Length: 12 ft

ME116-BLK-RH

Miller Edge Black Right Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide-in edge for sectional doors.
With appropriate mounting channel this edge will fit nearly all doors from 1-1/2" to 2" thick. The ME116 has been designed to fit all CHI doors with double track bottom retainers.
ME116 is resistant to flame water and most common greases and oils
Soft ends
Temperature range -30F to 155F
Lead wire: 22 gauge universal

.......more details

OGH-6435-ECB

Manaras 1-1/2 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

.283_3-3/4"-RH

Torsion Spring .283 x 3-3/4" x 12ft RH White

Wire size: .283
Inside diameter: 3-3/4"
Length: 12 ft

K76-35664

LiftMaster RPM Module

361LMC

LiftMaster 1-btn Digital Transmitter 315MHz ***No Longer Available

9 dip switch 315MHz transmitter
Compatible with Commercial operators L3 & L4
Visor clip and battery included (GP23A)

Programming Instructions Instructions de programmation

.225_2"-LH

Torsion Spring .225 x 2" x 12ft LH Orange/Green

Wire size: .225
Inside diameter: 2"
Length: 12 ft

9150000630

1/4" Stops ONLY 100/pkg

Stops only - 100 per pack

14FW

Rolling Steel 3" Filler Endlock for Continuous

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

SF600U-114

Spring Fitting 6" Pair for 1-1/4" Shaft

Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
Pair includes: (1) winding & (1) stationary.
Not single thread.
Winding bar hole 5/8"

PRO-HB-5038U-RH

Micanan 1/2HP 380V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

D0MKTRP001

DURULITE STD-IND ROLLER KIT

oller kit for Chase Doors Standard DURALITE model doors. Fits 90 X 90 and 180 X 90

0824-2-WHITE

Elton Commercial Window 2" thick Door 0824 White Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 23 15/16" x 7 15/16"
Cut-out size: 23-1/8" x 7-1/8""
Vision area: 21-9/16" x 5-1/5"
Different glass options and frame colours are available upon request

.......more details

26142

Doorlec Cam Shaft Threaded 5/8" x 7-1/4" w/Sprocket GHX

Explosion Proof rotary shaft 1.59cm x 18.4cm

MULTI-GROOVE

Garex Ready to Install Door Multi-Grooved Special Order

Available with a choice of simple and varied colors this textured woodgrain door will meet your style and requirements for quality and durability
R-16

2200-150

Linear Chain #41 Sold per Foot

ALUM-510

Aluminum 24" x 100' Spool Canyon Clay / Argile # 510

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 510
Reverse side is #431 Bright White

2200-367

Linear Chain Tension (Light) Spring

Used on various Linear Gate operators

GALV-319-6-144-L

Torsion Spring .319 x 6" x 12ft LH Galvanized Blue/Green

Wire size: .319
Inside diameter: 6"
Length: 12 ft

.192-2-3/16-72-LH

Spring Wire .192 x 2-3/16" x 72" LHW Galvanized

.192 x 2.188" x 6'

.171-2-3/16-72-LH

Spring Wire .171 x 2-3/16 x 72" LHW Galvanized

210264

Skylink Case Cover Atoms

1222_DUAL_TROLLEY_12'

LiftMaster Dual Trolley kit for 12' high door includes #41 Chain for 12ft High Door Angle tracks (2x) 12' and (1x) shaft

Provides a second drawbar-type operation on wide standard door
Includes 12ft tracks #41 chain hardware & Round Bar 1" x 20'
Works with TDC12 & TDC22 Maxum operators

510.3920.07

Whiting Stainless Steel Rivets Option for Dry Freight Door 4-Rows of Hinges 7 Panels

Upgrade option

2376.177*34.960

Whiting Torsion assembly .177 wire size 34" spring length 96" shaft

LB610-102

Laminated Bumper Standard Black 102" x 10" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

OPH-6232-M-N1-LH

Manaras Opera-H 1/2HP 208V 3Ph with Monitored Board and N1 Photoeyes Left Hand

Monitored version with Nema 1 photoeyes

27120-575V

Doorlec Electric Motor 1/2HP 575V 3PH DC221

15-41B18LGH

Sprocket 41B18T 1" Bore

Also known as: 155016 41B18
18 Tooth Sprocket #41 Chain (41B18)
Includes 2 Set Screws

CRHMOFE

Pentagon Crank Handle for Manual Override Flexible End *** Price by Quote Only

SUPPORT002

Manaras Board Support Rivet 0.236" Black ** Special Order Only

028-200

Blue Giant Proximity Sensor 18mm 2m Cable **Special Order

Price by Quote Only

15-80B60YMP

Sprocket 80B60T 2.0B 2X 1/2-13"

Also known as: 158060

GAREX-WINDOW

Garex Thermos Made-to-Order Size Special Order

Special order to suit customer's needs

TS-1-255-GALV-KEY

Tube Shaft 1" x 255 (21'.25) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

TS-1-135-GALV-KEY

Tube Shaft 1" x 135 (11'.25) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

TS-1-129-GALV-KEY

Tube Shaft 1" x 129 (10'.75) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

15-50B50LGH

Sprocket 50 Teeth 1" Bore 1/4" Keyway w/SS

Same as 71-1550B50LGH

K76-34697-3

LiftMaster APS Encoder with Harness 12V

For use with various LiftMaster® Commercial Gate Operator Models such as RSL12UL

07-8005

LiftMaster Crank Link Barrier Gate

Also known as: K07-8005 G078005
For use with various LiftMaster® Barrier Gate Operators

41B6228

LiftMaster Mounting Bracket RJO

Also known as: 041C0902 41A6228 41C0902 41B6228

GALV-343-6-R

Cut-to-Length Torsion Spring .343 x 6" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

TRACK-SET-2LHR-F

2" Tracks Set 7'-0" Low Headroom 1-3/4" Door Clips for Wood Frame R12 Torsion Front

Complete set - torsion front

H11G08-SS

Hinge #8 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

H11G06-SS

Hinge #6 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

H11G05-SS

Hinge #5 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

OTBH-6212-AM05

Manaras Trolley Operator 1/2 HP 240V 1Ph Monitored Board w/Eyes Apt. Model

The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
#41 full roller chain
Includes monitored N4X eyes (PHOTO 061)

.......more details

10-LHB

BEA LZR Housing Bracket

��Housing bracket for the LZR-H100 sensor

OGH-6214-M-N1-RH

Manaras 1 HP 240V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

K21-16699

LiftMaster Transformer 120/240V 75VA 24VAC

For use with various LiftMaster® Speed Jack Commercial Door Operators

OSH-6234-M-N1-LH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

GALV-393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Galvanized Orange Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

GALV-375-334-L

Cut-to-Length Torsion Spring .375 x 3-3/4" Left Hand Wound Galvanized Yellow/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-319-258-R

Cut-to-Length Torsion Spring .319 x 2-5/8" Right Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

CLM125-H

Linear Credential Clamshell Card HID 125kHz Proximity Support 25 pk

Made of sturdy ABS plastic Off White
Complies with the Wiegand communication protocol and is compatible with certain HID prox card readers
Contactless: up to 8" read range
Supports printable 14 mil CR80 adhesive-back PVC cards
Sold in lots of 25
Same as: 830-00420

.......more details

2807.177*290

Whiting Spring Assby .177 x 2-3/16 x 29" Curbside

Replacement torsion spring with cones
Specs: .177 x 2-3/16" x 29" Long
For Roadside order part # 2806.177.290

CPT215-PER-FOOT

Miller Edge Field Configurable Sensing Edge Cut-to-Length

For do-it-yourself edges on sectional or rolling doors.
Black extrusion flexible PVC conductive polymer Ends: Molded polymer
End plugs and mounting channel sold separately.
Sensing edge size: 1-5/8"H (41mm) x 1-11/16"W (42mm)
When combined with the ME123 mounting channel ideal for 2" thick surfaces
Minimum Length: 3ft

.......more details

10FALCON-EXXL100

BEA Falcon Motion Detector w/Exp Proof Housing 100ft Cable Mount 6.5' to 11.5'

FALCON EX combines a microwave activation sensor with an explosion-proof / flame-proof housing
Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
FALCON EX can be mounted from 6.5' to 11.5' to fit any industrial application.
Nema4/IP66
Detection Zone: Falcon EX XL: 13’ × 6 ½’ @ 8 1⁄5’
Oerating termperature: -22-140F

.......more details