Devanco Canada - Get The Right Garage Door Opener‎ and Parts

BK020/PR-BOLT

Commercial 2" Safety Bottom Bracket with Bolt Sold as a Pair

Maximum cable diameter: 3/16"
Maximum door weight: 1300 lbs Zinc
Plated Steel
Sold as a pair

Installation manual

MEA2

Nice Key Unlock System for Older Metro Gate Op.

For underground gate operator
(1) MEA2 KEY UNLOCK SYSTEM (2) KEYS- METROPLEX & BIG METRO
Does not work on the newer systems. For newer Big Metro use BMA3 lever type release

2B737

LiftMaster Output Board EL25

Output board for models EL25 and EL2000 (041B0737)

ALUM-429

Aluminum 24" x 100' Spool Ice / Glacier White # 429

20% thicker than the aluminum sold in retail stores (0.022" )
Aluminum on the reverse side
Gentek # 429

Colour chart

CS303-DB50

EMX Car Sense Direct Burial Sensor with 50 ft Lead Wire ** Replaced by the LRS-DB-50

Can be used for above ground applications ie.. strapped to a post or wall
Easy low cost installation
Small size of the detector allow for easy installation in pavement
Rugged sensor is also suitable for above grade installations
Includes direct burial sensor and 50 ft of lead wire
Advanced 3-axis technology for better detection

.......more details

3950-41DS

LiftMaster Dead-Shaft Sprocket Kit for 3950

Used on doors without live shafts
Same as 41A7280
Includes #41 chain sprocket

Sell sheet

AK-11-KEY

Linear Key (1) only for AK-11 (2200-884)

Replacement Key ONLY qty: 1 only

C20-32F

Bearing 1-1/4" x 2" Press Fit C20-32F+GR 400 LBS

Stamped bearing for lighter loads
For a heavier duty machined bearing use R5114

124773

Roller 3" UHMW 7-1/4" Stem Rubber

3" UHMW tire covered with rubber
6202 sealed precision bearing
7-1/4" zinc plated stem
Rating: 200lb load; 10000 cycles of a 12' door
Helps quiet the operation of jackshaft operators

28020020-500

Cable Stainless 5/16" 1x19 500' Inox ** Price on Request

Not for use in aircraft applications
1x19 contruction type 302 / 304

Comparison charts

28020024-500

Cable Stainless 3/8" 1x19 500' Inox ** Price on request

Not for use in aircraft applications
1x19 contruction type 302 / 304

Comparison charts

104083

Marantec Reference Switch for Belt and Chain Rails

This part works with the positioning tab and motor to determine the open & close limits of the actual garage door.

H12G10-SS

Hinge #10 x 12 gauge Stainless Steel **NLA

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

CPS3CARD

LiftMaster Option Card Only (41K0811)

Works with all commercial Logic versions L2 L3 L4 L5
Use with CPS-U to add a second set of eyes to the operator
Allows activation of Timer-To-Close without CPS-U
Simply plugs into Logic board
Cut resistors on JU1 & R16 to activate timer feature
Same as 041K0811

.......more details

82-SB50-08

LiftMaster Shoulder Bolt 3/8"-16x8 **DISCONTINUED

Shoulder Bolt
For SW470-S3
Formerly 82SB5008 G82SB5008

V3563-00-W-200

Vinyl Seal 3" Bottom Bead End 198" Bead Grey 200' Spool

Bead diameter 3/16"-7/32" +/- tolerance

K74-30754

LiftMaster Battery Harness 1 unit only

For LA400
2 harnesses required per operator- 1 for each battery

BK020/PR

Commercial 2" Safety Bottom Bracket Sold as a Pair (L & R) *** No Longer Available

Maximum cable diameter: 3/16"
Maximum door weight: 1300 lbs Zinc
Plated Steel
Sold as a pair

PVD-ARM-ALUM-16

Aluminum Gate Arm 16' 1" x 3.5" with Reflective Band

20109

Doorlec Hoist Spring EHJ

20-1050B-2RLP

LiftMaster Electric Motor 1/2 HP 115/230V 1P Base Mount

Replacement motor for APT
Also known as 20-1050B-2RL 20-1050B-2R K20-1050B2R
For L3 and L4

19-5116-NP

LiftMaster Trolley Roller Chain Pack #41 for 16ft Door Nickel Plated

For 3/4 & 1 HP trolley operators

K20-1050C-2T

LiftMaster Electric Motor 1/2 HP 230V 1 ph CF

For gate op. SL580-5011

MGS20-B-2U-04

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 4ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

MGS20-B-2U-05

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 5ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

MGS20-Y-2U-04

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 4ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

T-833-H

FL-Heddolf 3-btn Transmitter 311 MHz ** this model is discontinued

Open/Close up to 3 doors or Open/Close/Stop one door
Heddolf-Keystone 3 button transmitter 311mhz
8 3-Position dip switch format
9V battery and metal clip included
Compatible with Allstar 3 button T-833
Same as P220-3K

.......more details

Q074

LiftMaster Coupling (3/4 x 5/8) 3 pcs K75-50130

Fits model HCT
Same as K75-50130

102079

Flangette Retainer football style 2 pieces 2 hole PFL6Z PFL206

2 required per bearing # 101475
works with: 1-1/4" bore sealed insert bearing part # SB206-20

41A7920-1

LiftMaster Hardware Kit

FL-T50

FL-Heddolf 1-Button Dip Switch Remote FL 311MHz *** Discontinued.

ID220-1KA Heddolf remote
9V battery & metal clip included

UCFL-1-1/4

Self-Aligning Cast Flange Bearing Football Style 1-1/4" Bore UCFL207-20

Grey cast iron painted.
Comes with 2x set-screws
Football style 2 bolt
5-1/8" hole center to hole center distance
3500 lbs load rating

HTUS

Stainless Steel Garage Door Top Roller Bracket 12-Gauge Single Slot

Manufactured with 12ga. Rust-Resistant 304 Stainless Steel
Universal Design
Adjustable from 2"-3-1/2"
Fits Most Overhead Sectional Doors
Priced Per Each

50ACTWF

LiftMaster Receiver Logic Board AC WiFi*** Discontinued and replaced by the 050ACTBMC

This is a 315MHz Security+ 2.0® Receiver Logic Board featuring Wi-Fi with MyQ® technology.
For use with various LiftMaster® and Chamberlain® AC Chain or Belt Drive Garage Door Openers; manufactured after 2011.
The unit will feature a yellow learn button
Also known as: 1D8088-1 045ACTWF 1D8808-3 041D8088 50ACCL5
Same as 050ACTWF
1 Year Warranty

.......more details

IRB-MON

EMX Industries Nema 4 Through-Beam Photocells with Gold Hoods New UL325-2018 *** No Longer Available

Type B1 non-contact sensor
UL325-2018 compliant
Lens-less design
Simple 2-wire connection
Relay contacts available
NEMA 4X enclosure

.......more details

Installation Manual Sell Sheet

K72-33192

LiftMaster Limit Shaft Kit NEMA 4 & 4X for H J HJ GH GT T & APT Operators

For: NEMA 4 & 4X for H J HJ GH GT T & APT Operators
Shaft measures 12" in length
Compatible with Logic 4 and Logic 5 operators

MOTOR403

Manaras Electric Motor 1/2HP 120V 1PH

Instant reverse
Medium-duty 1500 rpm
For OMJ/OMH

CP-BRG-58

Lynx Bearing 5/8"

6 in total on a MCJH

1104-7'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 7' Long - Dark Sandstone (DDG)

Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

DC2000SL

LiftMaster Power Backup *** Discontinued

Keeps traffic moving during a power outage
Opens the gate when power goes out to allow vehicles to enter or exit
When power is restored the gate will return to normal operation
Compatible with operators: SL3000UL

MALED12

LiftMaster LED Barrier Arm 12 ft

The NEW LED Barrier Arm provides exceptional visibility 24 hours a day.
Durable aluminum arm with integrated red LED lights on one side and Red/White DOT tape on both sides.
Ideal for use with the Mega Arm and Mega Arm Tower

PRO-GH-10011-U

Micanan 1 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

79-16088

LiftMaster Circuit Board Assembly for LGO **discontinued**

Same as K79-16088

J751L5

LiftMaster Industrial-Duty Jackshaft 3/4 HP 115/230V 1Ph L5

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
J operators are attached to the door jackshaft to indirectly drive the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you

Installation manual Manuel d'installation Sell sheet Brochure

10-10875

LiftMaster Disconnect Lever H MH J **to extent of inventory

MI00003

Micanan Pocket Wheel for PRO-H/HB/LH

Comes with 3/4" bushing and 2 1/4" spring pins

11-10705

LiftMaster Output Shaft MH

PRO-APT-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

Installation manual Specification sheet

1003-6.5-PER-FT

Bottom U-Rubber 6.5" Black Sold per Foot

MOD064C

Manaras Trolley Hoist Kit #410 Chain for OTH

Modification when purchased with an operator
#410 CHAIN WITH FRONTIDLER ASSY
CHAIN HOIST ASSY
HOIST KIT FOR TROLLEY HOIST CHAIN

Drawing

26-942255

Truck Door Bottom Panel with Hardware (15.5" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Primer Finish
Comes with 18" pull strap assembly two bottom roller shaft covers and stud plates standard lift handle two u-bolts flexible PVC bottom seal and aluminum seal retainer.

.......more details

9150000620

3/32" Sleeve ONLY 100/pkg

Sleeves only 100 per pack

.250-258-R

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

K20-1050B-2P

LiftMaster Electric Motor 1/2 HP 115/230V 1P Base Mount

Replacement motor for BG770 BG790
Same as 20-1050B-2

CPT-210-50

Miller Edge Bulk Extrusion 50 ft Roll

For do-it-yourself edges on sectional or rolling doors.
Black
End plugs adhesive and mounting channel sold separately.
Sensing edge size: 1-5/8"H x 1-3/4"W
When combined with the ME123 mounting channel it can be installed on doors measuring 1-1/2" to 2" thick.

Installation Manual Sell Sheet

1007-1-5/8-14

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

For door thickness of 1-5/8" to 1-3/4"

7001-WG-8-MO

Residential Wood Grain Side & Top W/S Medium Oak 8' Long - Painted Screws to Match

Medium Oak retainer with Medium Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-10-DO

Residential Wood Grain Side & Top W/S Dark Oak 10' Long - Painted Screws to Match

Dark Oak retainer with Dark Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-8-DO

Residential Wood Grain Side & Top W/S Dark Oak 8' Long - Painted Screws to Match

Dark Oak retainer with Dark Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-9-CO

Residential Wood Grain Side & Top W/S Cherry Oak 9' Long - Painted Screws to Match

Cherry Oak retainer with Cherry Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

39-16759

LiftMaster Clutch Pad for EGJ ***NLA NO SUB

MA028

LiftMaster Padded Barrier Arm Yellow 14ft

For use on Mega-Arm gate operator
Requires adapter collars model MA031 - sold separately

Additional arm accessories

EL2000SS

LiftMaster Telephone Entry Access Control System Stainless Steel ***NLA

A high-capacity telephone entry access control system designed to complement virtually any gated community.
It is flexible enough to be used in apartment buildings condo complexes office parks and commercial sites.
features a 5-inch backlit LCD screen and clearly displays up to 4 lines with 20 characters per line making it a great choice for multi-tenant installations
Entry Codes allow for 2000 4-digit codes to be programmed. The codes can be time-restricted and/or use restricted. The codes can be split up any way you choose; 500 directory codes 1000 card codes 500 entry codes for example •Transaction Monitoring stores a maximum of 8000 transactions including date time identification and transaction type.
Activity Reporting gives property managers the ability to print database system and history reports.
Call Forwarding and Do Not Disturb schedules can be programmed for every resident.

.......more details

Installation Manual Programming Instructions Instructions de programmation Sell Sheet

BP-BE102BP

Contact Block Base Mount NC Contact

For use with RC P enclosures. IP65

PLATE084

Manaras Plated Brake Plate for OSH

Plate only

TC134-16

Top Cap 1-3/4" 16 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

TC134-12

Top Cap 1-3/4" 12 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

1005-2-8'

Aluminum Bottom Retainer U-Shaped 8' Long**Actual Length 8'1"**

For door thickness 2"

CB18B0500-KOR

Cable 1/8" 7x19 500' Galvanized Supreme

Galvanized Cable 1/8" 7x19 500ft spool.
Cable break strength: 2000 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

UNI-100-82

Uni-Size Bottom Weather Seal 8'2" Long *To extent of inventory*

Fits most standard doors 1-3/8" thru 2" thick
Pliable in all temperatures
Accepts pneumatic or electrical edge
15 pieces per box

.295-134-L

Cut-to-Length Torsion Spring .295 x 1-3/4" Left Hand Wound Blue

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

K23-19380-2

LiftMaster Reset Switch Kit for Miracle-One

Reset switch and Harness

MB-01102

Micanan Electric Motor Only 1/2HP 230/460V 3PH

Base Mount motor O.D.P. FR56
Used on Micanan's T TB APT J EJ H EHJ HHD & SD

5001-7-CHARCOAL

Residential Side & Top Weather-Strip 7' Long - Charcoal

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

1104-ASFT-16FT

Elton Aluminum Stiffener for 1104 16ft

Prevents the 1104 from buckling in the hot sun

LD-11

EMX Base Socket 11-Pin DIN Rail Mountable Black (Was formally Grey)

For use with D-TEK detectors (most commonly used)
Hourglass shaped

OVERLOAD019

Manaras Telemecanique Overload Base

CONTACTOR043

Manaras Reversing Contactor Allen Bradley 16A-24VAC

AB #100-C16*10

MK00488-NM

Micanan Electronic Circuit Board Non-Monitored

Replacement board for PRO-LH (50-11)
Board does NOT have terminals P1 & P2
Up to 20 transmitters can be programmed

Instructions Manual

MH00001

Micanan Bronze T-Bushing 3/8" ID

2 required per operator

41D605-1

LiftMaster Electric Motor 80kg/100kg

For retail models: WD952KD HD800D and WD952LD

Replacement Instructions Instructions de remplacement

27-20114

Truck Door W-Style Spring Assembly Curbside RHW 35" Long

Wire thickness: .187
Assembled Spring length: 35 inches long
Inside diameter: 2 3/16"
Includes cable drum and bearing assembly winding cone wound onto spring for stronger design and internal spring spacer.

414001

Linear 4-Channel Multi-Code Visor Transmitter 300 MHz

Compatible with 300 MHz Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches
Power: 9-volt battery
Codes: 512 codes for each channel (set by dip switches)
RF frequency: 300 MHz

.......more details

Installation Manual

4011-12FT

Aluminum Retainer only for Light Brush or Vinyl Insert 12' Long 90 degree

For angle application
For use with Light Brush or Vinyl Insert.
For applications that require dual brush or brush and vinyl

GH4416-03-L

Green Hinge #3 12-ga Left Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-04-R

Green Hinge #4 12-ga Right Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

PIN016

Manaras Coupling Pin 3/8" for MJH

4 required for MJH manufactured prior to 1998
2 required for MJH manufactured after 1998

IG2-EXT-MNT

Miller Edge Wall Mount Extension Bracket

1 ft L x 2" H x 3" W

IG2-P1

Miller Edge Pair of Pedestal Mounts for IG2 Eyes

Flexible spring loaded pedestal stand
30 degree of flex
27" high from bottom base to photoeye

IG2-K10-30

Invisi-Guard-2 Photo Eye Kit 30ft Battery Powered *** Discontinued

The Invisi-Guard-2 thru beam photo optic system sends an invisible beam of light from a transmitting unit to a receiving unit.
The light beam is intended to function as a protective line guarding a potentially hazardous zone.
When the light beam is interrupted by an obstruction a signal is sent to the motor controls to stop or reverse motion
Universal Design Works with Pre and Post 2010 Operators
Spans Distances up to 30 feet (model dependent)
Time Saving Installation

.......more details