Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
110554

Allstar MVP 1-Door O/C/S Receiver 318 MHz ***Replaced by P-831RE

  • Three channels - three relay outputs
  • 8-wire operator connection
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
    • .......more details
Programming Instructions
1336.1

Whiting Curbside Top Panel Closure Bracket for 10" radius

1336.2

Whiting Roadside Top panel Closure Bracket 10" Raduis

111645

Allstar MVP 1-Channel 4-Wire Gate Receiver 318 MHz ***Replaced by P-9931R-4F

  • One channel
  • 4-wire operator connection
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
    • .......more details
Programming Instructions
MVP-WKE

Allstar Wireless Keypad 110927 318 MHz *** NLA

  • Compatible with all MVP receivers and operators
  • 4-digit access code
  • Backlit keys
  • Operate LED
  • Power: 9-volt battery
  • Codes: 19683
    • .......more details
Programming Instructions
MCT-2

Linear 2-btn MegaCode Visor Transmitter 318 MHz

  • Activates two 318MHz MegaCode receivers independently
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery incl.
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 2.16" W x 3.75" H x .95" D
    • .......more details
Programming Instructions
ACT-34B

Linear 4-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Supplied with quick-disconnect key ring
  • Power: Two CR2016 batteries incl.
  • Codes: Factory block coded in MegaCode format
  • RF frequency: 318 MHz
  • Dimensions: 1.25" W x 2.25" H x .48" D
    • .......more details
Programming Instructions
MGR

Linear 1-Channel MegaCode Gate Receiver 318 MHz

  • Single Form ”A” (normally open) relay rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Memory: storage for up to 40 MegaCode transmitters
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 1000000+ (MegaCode format)
  • RF frequency: 318 MHz
    • .......more details
Installation Manual
DRQP

Linear 1-Channel Delta3 Gate Receiver 310 MHz ** Available to extent of inventory

  • 1-Channel Gate Receiver
  • High-sensitivity short-range radio receiver
  • Operates in conjunction with the 9-inch local antenna (supplied).
  • Designed for use with automatic gate operators or systems where a remote antenna is needed.
  • Same as: DNR00013P
Installation Manual
GRD

Linear 1-Channel Delta3 Gate Receiver 310 MHz (DNR00101) ***Discontinued

  • Auto voltage sensing - no jumpers to set
  • Single Form ”A” (normally open) relay rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 256 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
8833T

Allstar 3-btn 3-Door Transmitter 108817 318 MHz

  • Open/Close remote for 3 doors
  • Compatible with Allstar and MVP receivers
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 6561 (set by trinary dip switches)
  • RF frequency: 318 MHz
    • .......more details
Programming Instructions
8833TC-OCS

Allstar 3-btn 3-Door O/C/S Transmitter 109025 318 MHz ***Replaced by P-8833TC-OCS

  • Open/Close/Stop remote for 3 doors
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Slide switch selects door to operate
  • Power: 9-volt battery
    • .......more details
Programming Instructions
8833TC

Allstar 3-btn 9-Door Transmitter 109023 318 MHz ***Replaced by P-8833TC

  • Open/Close remote for 9 doors
  • Compatible Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Slide switch selects door trio to operate
  • Power: 9-volt battery
    • .......more details
Programming Instructions
733T

Allstar 3-btn 3-Door O/C/S Transmitter 107477 318 MHz *** Replaced by P-733T

  • Open/Close/Stop remote for 3 doors
  • Compatible with 3-channel Allstar and MVP receivers
  • Stationary mounting
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
Programming Instructions
639T

Allstar 3-btn 9-Door O/C/S Transmitter 107476 318 MHz ***Replaced by P-639T

  • Open/Close/Stop remote for 9 doors
  • Compatible with 3-channel Allstar and MVP receivers
  • Stationary mounting
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
Programming Instructions
535T

Allstar 3-btn 27-Door O/C/S Transmitter 107475 318 MHz ***Replaced by P-535T

  • Open/Close/Stop remote for 27 doors
  • Compatible with 3-channel Allstar and MVP receivers
  • Stationary mounting
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
Programming Instructions
MCT-3

Linear 3-btn MegaCode Transmitter 318 MHz ** Use MTS3

  • Activates three 318 MHz MegaCode receivers
  • Test/operate LED
  • Visor mounting clip supplied
  • Two CR2032 batteries included
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 3" W x 1.875" H x .625" D
    • .......more details
Programming Instructions
DT2A

Linear 2-btn Delta3 Transmitter 310 MHz (DNT00017A)

  • Activates two Delta-3 receivers independently
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
DT

Linear 1-btn Delta3 Transmitter 310 MHz (DNT00002A)

  • Activates one Delta-3 receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 (set by 8 dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
HAE00032

Linear 8ft Chain Assembly (HCT8)

HAR-11

EMX Wiring Harness 11-Pin for D-TEK-MVP 5111-1

  • Universal 11-pin harness
41A2816

Jobber Drive Gear for Chamberlain Sears LiftMaster residential operators

  • Drive gear for Chamberlain / LiftMaster / Sears residential garage door openers built 1984 +
  • This is an excellent quality aftermarket product
HAE00014

Linear Pulley and Bracket - Chain (HCT)

HAE00049

Linear Drive Sprocket Holder and Belt Clamp

217436

Linear Drive Sprocket - Chain (HCT)

HAE00013

Linear Turnbuckle Assembly - Chain (HCT)

218189-01

Linear Trolley Assembly

HAE00023

Linear 7ft Belt & Inner Slide Assembly (HBT7)

220499

Linear Drive Sprocket - Belt (HBT)

218954-03

Linear Pulley & Bracket Assembly - Belt (HBT)

220205-02

Linear Complete Hardware Kit for LDO LSO LCO

  • Includes all the hardware needed to install the operator in its entirety.
  • Includes the rail hardware (door bracket and header bracket) and hardware for installing the safety beams.
HAE00002

Linear Safety Beam Set *** No Longer Available

  • Set includes: Sender and Receiver photocells wire and connectors
  • Safety beams will work with all Linear operators that currently have safety beams installed.
HAE00004

Linear Limit Switch Assembly

  • For LSO LDO LCO
219109

Capacitor 1/3 HP 43-53 MFD 250V

  • For LDO33 only
219110

Capacitor 1/2 HP 53-64 MFD 250V

  • For LDO50 only
232168

Capacitor 3/4 HP 220V 65 MFD

  • For LCO75 only
HAE00047

Linear Complete Gear Set with Grease

  • Set includes: Helical gear worm gears and grease
  • Helical gear measures 2-7/8" diameter
HAE00048

Linear Helical Gear with Grease

  • Includes roll pins
  • Can be used on all Linear / Westinghouse residential operators.
  • Helical gear measures 2-7/8" diameter
218014-02

Lamp Socket Assembly

  • For models LSO LCO LDO
HAE00040

Linear Control Logic/Receiver Board

  • Replaces HAE00039
  • Control board for LSO LDO LCO models
1336.7

Whiting Stainless Steel Curbside Top Closure Bracket for 8" radius

1920.1

Whiting Stainless Steel Top Closure Mounting Plate for Insulated Doors

1336.8

Whiting Stainless Steel Roadside Top Closure Bracket for 8" radius

1336.6

Whiting Stainless Steel Roadside Top Closure Bracket for 10" radius

7953

Whiting Truck Door Hinge Gasket White

5600.3

Whiting Truck Door Stainless Steel Bottom Roller Bracket Assy Complete

1336.5

Whiting Stainless Steel Curbside Top Closure Bracket for 10" radius

7952

Whiting Truck Door Stud Plate Gasket

7176.225_31.910

Whiting Heavy Duty Torsion Assembly .225 x 31" shaft 91"

1209.1

Whiting Stainless Steel Truck Door Side Hinge with Roller Cover

7176.225_31.93

Whiting Heavy Duty Torsion Assembly .225 x 31" shaft 93"

RV-100

1" Vinyl Insert for Brush Retainer per foot

  • Color: Black
  • Fits in light brush retainers
RV-112

1-1/2" Vinyl Insert for Brush Retainer per foot

  • Color: Black
RV-200

2" Vinyl Insert for Brush Retainer per foot

  • Color: Black
3002-200FT

Gum Hose 1/2" ID 200' Spool

  • 1/2" inside diameter
  • Installed in bottom "U" rubber for use as a safety edge
600BH

6" Heavy Brush Insert 8ft Long

  • Polypropylene bristles
600BL

6" Light Brush Insert 6ft Long

  • Polypropylene bristles
300BH

3" Heavy Brush Insert 8ft Long

  • Polypropylene bristles
  • Same as model MS1712
200BL

2" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1703
300BL

3" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1705
138BL

1-3/8" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1702
100BL

1" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1701
4005-8FT

Aluminum Retainer only for Heavy Brush 8' Long 180 degree

  • For angle application (180 degree)
  • For use with Heavy Brush
4005-16FT

Aluminum Retainer only for Heavy Brush 16' Long 180 degree

  • For angle application (180 degree)
  • For use with Heavy Brush
4009-6FT

Aluminum Retainer only for Light Brush 6' Long Reverse Angle

  • For reverse angle rolling steel doors.
  • For use with Light Brush or Vinyl Insert.
4004-16FT

Aluminum Retainer only for Heavy Brush 16' Long 45 degree

  • For angle application (45 degree)
  • For use with Heavy Brush
4010-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree

  • For angle application (180 degree)
  • For use with Light Brush or Vinyl Insert
4004-8FT

Aluminum Retainer only for Heavy Brush 8' Long 45 degree

  • For angle application (45 degree)
  • For use with Heavy Brush
4010-6FT

Aluminum Retainer only for Light Brush 6' Long 180 degree

  • For angle application (180 degree)
  • For use with Light Brush or Vinyl Insert
4008-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree 5/8" Offset

  • 2" Offset
  • For use with Light Brush or Vinyl Insert
4007-16FT

Aluminum Retainer only for Light Brush***Actual Length 16'2" 90 degree

  • For angle application
  • For use with Light Brush or Vinyl Insert.
  • die # A-25060
4008-6FT

Aluminum Retainer only for Light Brush 6' Long 180 degree 5/8" Offset

  • 2" with 5/8" Offset
  • For use with Light Brush or Vinyl Insert
4007-12FT

Aluminum Retainer only for Light Brush 90 degree**Actual Length 12'2"

  • For angle application
  • For use with Light Brush or Vinyl Insert.
  • die # A-25060
4007-8FT

Aluminum Retainer only for Light Brush 90 degree

  • For angle application
  • For use with Light Brush or Vinyl Insert.
4007-6FT

Aluminum Retainer only for Light Brush 90 degree***Actual Length 6'1"

  • For angle application (90 degree).
  • For use with Light Brush or Vinyl Insert.
4006-12FT

Aluminum Retainer only for Light Brush 12' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
4003-12FT

Aluminum Retainer only for Light Brush 12' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
4003-6FT

Aluminum Retainer only for Light Brush 6' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
4002-12FT

45 Degree Aluminum Retainer for Light Brush 12' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
4001-12FT

Aluminum Retainer only for Light Brush 12' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
4001-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
1003-5"-YELLOW

Bottom U-Rubber 5" Yellow 150' Long

  • 5" yellow vinyl insert 150ft spool.
1003-3"-YELLOW

Bottom U-Rubber 3" Yellow 200' Long

  • 3" yellow vinyl insert 200ft spool.
DR

Linear 1-Ch DR3A Delta3 Receiver 310 MHz

  • 310 MHz frequency 8 dip switches for coding 256 possible codes
  • 24V AC/DC input power 3 terminal connection
  • Activates one device
  • Dimensions: 5.5" W x 4" H x 1.25" D
  • Same as: DNR00001
Installation Manual
1003-4"-200FT

Bottom U-Rubber 4" Black 200' Long

  • 200ft spool of vinyl insert.
1003-5"-150FT

Bottom U-Rubber 5" Black 150' Long

  • 150ft spool of vinyl insert.
1008-1-3/8"

Bottom Nail-On for Wood Door Light Duty per foot

  • For 1-3/8" doors.
  • Color: Black
1009-1-3/4"

Bottom Nail-On for Wood Door Heavy Duty per foot

  • For 1-3/4" commercial doors.
  • Color: Black
1009-1-3/8"

Bottom Nail-On for Wood Door Heavy Duty per foot

  • For 1-3/8" commercial doors.
  • For heavier applications than the 1009-1-3/4".
  • Provides a better cushion.
  • Color: Black
1019-1-3/8-14'

Rigid Vinyl Bottom Retainer Flat 14' Long

  • Black - for door thickness of 1-3/8"
1019-1-3/8-16'

Rigid Vinyl Bottom Retainer Flat 16' Long

  • Black - for door thickness of 1-3/8"
1019-1-3/8-10'

Rigid Vinyl Bottom Retainer Flat 10' Long

  • Black - for door thickness of 1-3/8"
1014-1-5/8-24'

Rigid Vinyl Bottom Retainer Notched 24' Long

  • Black - for door thickness of 1-5/8"
1019-1-3/8-8'

Rigid Vinyl Bottom Retainer Flat 8' Long

  • Black - for door thickness of 1-3/8"
1014-1-5/8-10'

Rigid Vinyl Bottom Retainer Notched 10' Long

  • Black - for door thickness of 1-5/8"
1014-1-5/8-12'

Rigid Vinyl Bottom Retainer Notched 12' Long

  • Black - for door thickness of 1-5/8"
1014-1-5/8-14'

Rigid Vinyl Bottom Retainer Notched 14' Long

  • Black - for door thickness of 1-5/8"
1015-1-3/4-24'

Rigid Vinyl Bottom Retainer Raised Centre 24' Long

  • Black - for door thickness of 1-3/4"
1014-1-5/8-8'

Rigid Vinyl Bottom Retainer Notched 8' Long

  • Black - for door thickness of 1-5/8"
1015-1-3/4-10'

Rigid Vinyl Bottom Retainer Raised Centre 10' Long

  • Black - for door thickness of 1-3/4"