Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
16-4L290

LiftMaster Cogged Vbelt 4L 29"

LDM-1

Long Distance Module

  • Compatible with all door and gate operators that use 24V AC
  • 20 mile range
K74-30754

LiftMaster Battery Harness 1 unit only

  • For LA400
  • 2 harnesses required per operator- 1 for each battery
26CW94325

Truck Door Bottom Panel with Seal (15" x 98") Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes only with bottom retainer and seal (installed)
    • .......more details
BK020/PR

Commercial 2" Safety Bottom Bracket Sold as a Pair (L & R) *** No Longer Available

  • Maximum cable diameter: 3/16"
  • Maximum door weight: 1300 lbs Zinc
  • Plated Steel
  • Sold as a pair
19-5116

LiftMaster Trolley Roller Chain Pack #41 for 16ft Door ***Actual length 37ft (444")***

  • For 3/4 & 1 HP trolley operators
22210

Push Button Station 3 Oval Buttons O/C/S Flush Mount ** discontinued. To Extent of Inventory

  • Three button wall station Open/Close/Stop
  • NO contacts on the Open and Close buttons
  • NC contact on the Stop button
  • Stainless steel surface plate
  • Flush mount
MHS5011U-LH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

  • Designed for use on rolling sheet doors.
  • It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
  • Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
  • Floor level disconnect
  • 24V NEC Class 2
  • Wiring is factory present to C2 mode
    • .......more details
Installation manualSell sheet
MD-00031

Roller Chain #40 Nickel Plated Sold by the Foot

1224-2-WHITE

Elton Commercial Window for Flush Doors 2" thick 1224 White Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 25-1/8" x 13-1/8"
  • Cut-out size: 24-1/16" x 12"
  • Vision area: 21-11/16" x 9-5/8"
  • Different glass options and frame colours are available upon request
    • .......more details
PPLX

LiftMaster Stand Alone Proximity Reader *** No Longer Available

  • 6" read range
  • 50000 user capacity
  • Multiple Wiegand protocol (Sentex® 26-bit industry standard PassportTM)
  • Programmable as stand-alone or Wiegand pass-through
  • Simple-to-use handheld radio programmer (model PPRP; sold separately)
  • Programmable output relay (NO/NC)
    • .......more details
Programming instructionsSell sheet
.437-6-R

Cut-to-Length Torsion Spring .437 x 6" Right Hand Wound Red/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
MU22-2WIRE-E-B

Miller Edge MU22 2-Wire End Black - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
11202

Doorlec Cap Screw 1/4"-20 x 4"

65-52091-16

LiftMaster Manual Hoist Mod. M8 #41 Chain for 16ft High Door

  • For 3/4 Hp & 1 Hp Trolley operators
  • Includes floor level brake release cable 1" x 12' round bar.
BRACKET003

Manaras Disconnect Lever Bracket MJ

MGS20-Y-2U-05

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 5ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
MGS20-Y-2U-04

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 4ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
PRO-HBH-7523U-L

Micanan 3/4HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

  • 3/4 HP230V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
9291644400

Galvanized Torsion Spring .306 x 3-3/4 x 44" L with Cones LHW

MD00044

Micanan Spur Gear 12B60

S142BRNN924

Carlo Gavazzi Amplifier 24V Alarm Output Time Delay

  • Processor controlled amplifier for one set of photoelectric sensors type MOFTR.
  • 11-pin circular plug for easy connection.
  • 8A SPDT relay output NPN/ PNP transistor output or alarm output.
  • Diagnostics for sensor test during operation.
  • Alignment help via LED or alternation of alarm output.
  • Level indication for dirt accumulation.
    • .......more details
102079

Flangette Retainer football style 2 pieces 2 hole PFL6Z PFL206

  • 2 required per bearing # 101475
  • works with: 1-1/4" bore sealed insert bearing part # SB206-20
CONTACTOR003

Manaras Repl. Kit Reversing Contactor Allen Bradley 16A-24VAC

Drawing
38874R3.S

Genie Electronic Circuit Board Assembly

  • Replaces board 38001R3.S and 37470R3.S
  • Compatible with Genie Series 3 model 3024 garage door opener systems and Overhead Door Series 3 Model 7030
MC00012

Micanan Gear Reducer PRO-GOHD BHC 63 40:1 56C

ST-PROFILE

Soft Touch Profile Sold per Foot

  • Yellow air-wave edge
  • Fits most standard 1-5/8" retainers
  • 300 feet in a roll
ST-ENDCAP

Soft Touch End Caps Sold Individually

CP-BRG-1

Lynx Bearing 1" *** Replaced by HW-BRG-1

  • 2 in total on a MCJH
109441.0002

Overhead Complete Limit Switch Assembly JST

  • Replaces part number 109441.0001
  • Replacement has 3 limit switches
BMBOX-HARDWARE

Complete Hardware Box for Big-Metro BMBOX

  • Foundation box for Big-Metro gate operator
  • Kit includes: (1) #60 – PMD1025.4610 – MECHANICAL STOP BOLT NUT (1) #62 – V12X30.5102 – BOLT MECHANICAL STOP (1) #63 – D12B/5110 – NUT MECHANICAL STOP (1) #61 – D18.5110 – NUT M18 (1) #52 - 5PMCS1.4630 – BALL BEARING (1) #58 – PPD2288.4540 – NYLON HINGE COVER (2) #65 – 16X1.5124 – SCREW FOR LID COVER (4) #64 – D.12.5110 – NUT M12 LOCK NYLON
.393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Orange

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
SF375-114

Spring Fitting 3-3/4" Pair (Long Ear) 1-1/4" Bore

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding & (1) stationary.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1-1/4" solid shaft
  • 3-3/4" fittings can be combined with 6" spring fittings for duplex assembly.
    • .......more details
ME111-2L-T2

Miller Edge Black Left Hand Outlet Monitored 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •10K ohm resistor •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
    • .......more details
Installation ManualWorksheetSell Sheet
20456R

Genie Pulley Support Kit *** No Longer Available

  • Front metal clip with pulley
  • Front idler for use with Genie and Overhead Door T-rail systems
RA-AD-WKP-10

Lynx 10-btn Wireless Keypad AD455 372 MHz

Compatibility chart
MAREDLED17

LiftMaster Red LED Light Stip 13ft Long

  • Provides LED visibility on both sides to 17 ft. arm.
MALED17

LiftMaster LED Barrier Arm 17 ft

  • The NEW LED Barrier Arm provides exceptional visibility 24 hours a day.
  • Durable aluminum arm with integrated red LED lights on one side and Red/White DOT tape on both sides.
  • Ideal for use with the Mega Arm and Mega Arm Tower
  • Counterweight required part # MALEDCW
26966D

Genie Chain Pulley

  • Front idler pulley for full chain models ie..PMX500
  • Fits a T-rail
  • Diameter: 2-3/8"
  • 7/16” bore
  • For use with t-style rails
PRO-GH-10011-U

Micanan 1 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
111854.0001

Overhead Logic Board for RSX 1/2 Hp 115/208/230V 1PH *** By quote only

  • Description: KITPCB1PH1/2HPSX/HXUL10
  • For RSX ad RHX models 1/2 Hp Single phase operators
Replacement Instructions
.250-334-L

Cut-to-Length Torsion Spring .250 x 3-3/4" Left Hand Wound Green

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
MK-00011

Micanan Radio Control Terminal Strip

H105L5-LH

LiftMaster Ind. Duty Hoist Op. 1 HP 575 VAC 3 Ph Logic 5 Left Hand W/Brake ***No Longer Available

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'installationSell sheetBrochure
MO00003

Micanan Compression Spring for PRO-H/HB

  • 0.80 ID x 0.092G x 1.80 Long
10-11021

LiftMaster Disconnect Lever GH

.363-6-L

Cut-to-Length Torsion Spring .362 x 6" Left Hand Wound Green/White

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
32-34792

LiftMaster Gear Reducer Nema 56C 30:1

  • Compatible with LiftMaster® Model SL585 Slide Gate Operators
  • Same as K32-34792
26-945255

Truck Door Intermediate Panel (15.5" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
26-942255

Truck Door Bottom Panel with Hardware (15.5" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Primer Finish
  • Comes with 18" pull strap assembly two bottom roller shaft covers and stud plates standard lift handle two u-bolts flexible PVC bottom seal and aluminum seal retainer.
    • .......more details
K72-19975

LiftMaster Clutch Shaft and Sprocket Assembly

  • Assembly includes: Clutch shaft 1" keyed flange bearings Dual sprcket 32/14 Splined core sprocket E-ring Compression spring Pulley assembly Washers Thrust bearing Retaining ring Slined hub and roll pin
  • Compatible with DJ J operators
CP-SH-58-1038

Lynx Complete Limit Shaft Assembly for MCJH

  • 5/8" x 10-3/8"
  • Same kit used for HDC except the HDC has 1 extra 5/8" space washer
.250-258-R

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
RDGRNCARD

LiftMaster Warning Device Option Board with Red/Green Light Box

  • The Red/Green warning light card flashes a warning light for 10 seconds prior to the Timer to Close activating the door to close.
  • Advanced warning of the door closing helps prevent traffic collisions with the door
  • Controls both 24V & 110V traffic lights
Installation Manual
DXR-702

Linear 2-Channel Digital Receiver 315 MHz *** Discontinued

  • A digital receiver with an isolated relay output designed for use with Linear's DX Format transmitters.
  • When the receiver detects a signal from a transmitter programmed into its memory the relay output activates.
  • The relay has four optional output configurations.
  • 32 transmitter capacity
  • RF activity indicator
  • Quick-learn programming
    • .......more details
Installation Manual
D525-54-HL

Cable Drum High Lift 54" D525-54HL Torque Force Pair

  • Maximum hi-lift: 54"
  • Capacity: 500 lbs per drum
  • Max. cable size: 3/16"
  • Cable length: Floor to shaft center 66" minus amount of Hi-Lift
  • Cross reference: DNS 54 OMI 54HL M134-1375
CPT-210-K5

Miller Edge Non-Monitored End Plug Kit *** Discontinued

  • For use with CPT-210-50 bulk extrusion
  • Kit includes: 5 wired 5 non-wired end-plugs 1oz tube of adhesive
BG790-50-11-HTC

LiftMaster Ind-Duty Wishbone Barrier Gate Op 1/2 HP 115V w/Arm Weight & Heater and TTC

  • A reliable gear-driven barrier gate operator that is perfect for industrial applications.
  • This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
  • The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
  • Standard Features: Control inputs and Adjustable limit settings
  • 02-102 Open/Close Push Button Included
Installation ManualSell Sheet
PB-BE102BP

Contact Block N/C Contact Plastic Enclosure *** No Longer Available No Replacement

  • Base mount
1007-1-5/8-8

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

  • For door thickness of 1-5/8" to 1-3/4"
7001-WG-8-DO

Residential Wood Grain Side & Top W/S Dark Oak 8' Long - Painted Screws to Match

  • Dark Oak retainer with Dark Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
K75-34790

LiftMaster Disconnect Kit for SL585

  • Kit includes: Release lever bracket cable compression spring washer screws clevis pin bushings roll pin bolts nuts & handle
Installation Manual
2'6X6SC50

Devanco Loop 2'6" x 6' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
1001-18-BLACK

Commercial Side & Top Weather-Strip 18' Long - Black

  • Aluminum retainer with black dual-fin vinyl
RS10295

Roller 2" Steel 9-1/2" stem 10 ball Hurricane Roller

  • High strength steel roller designed for hurricane applications
  • Wheel Diameter: 2"
  • Steel tire Stem made from alloy steel
  • Rated: 15000 cycles for a 12'h door
  • Load rating: 75 lb
  • Box qty: 100 Box weight: 62 lbs (2-9-1/2-10 steel)
    • .......more details
VBELT_4L400

Lynx VBelt 4L 40"

  • Fits Lynx MCJH operator
157370

Decorative Lift Handle Yorktown Style 8-3/4" Stamped Steel Sold per piece

  • Black Stamped Steel
  • Also known as Spade Style
  • Mounting hardware sold separately
  • Priced per each
26CW94522

Truck Door Intermediate Panel (12" x 98") Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
26CW94322

Truck Door Bottom Panel with Seal (12" x 98") Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes only with bottom retainer and seal (installed)
    • .......more details
K79-13493-2

LiftMaster Logic Board Replacement Kit FDCL

  • Replacement board for fire door model FDCL
HTRKITRSW

LiftMaster Self-Regulating Heater and Coil for RSW12V **DISCONTINUED

  • Protects system to -40F.
  • Installs into the operator frame
  • 120V
UNI-100-142

Uni-Size Bottom Weather Seal 14'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
.295-134-R

Cut-to-Length Torsion Spring .295 x 1-3/4" Right Hand Wound Blue

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
G658056

LiftMaster Counterweight for BG790 Arm

  • For 17' gate arm and up
  • For use with various LiftMaster® Barrier Arm Gate Operators (BG790) and Perimeter Access Solutions.
  • Also known as: 108056 088056 10-8056 G658056 G088056 10-8056M
G651208R

LiftMaster Replacement Wooden Wishbone Arm 24ft White / Black Stripes. for BG790 Counterweight NOT incl

  • Counterweight sold separately part # G658056
  • Replacement wishbone arm up to 24ft for BG790
18-MAG-STRAP

Magnetic Hinge Strap 18" Black Set of 4

  • Decorative hinge strap only.
  • Black flexible magnetic material with deep embossed design
K20-1075B-2P

LiftMaster Electric Motor 3/4 HP 115/230V 1Ph Contactor Model

LD7LP

LiftMaster 10-30VAC/DC Low Power Loop Detector ( 50-DSP7LP )

  • 10-30 VAC/DC low power fail-safe loop detector
  • <2mA stand-by current draw
  • Compact design - ideal for linear actuator control boxes
  • Automatic sensitivity and frequency adjustments
  • Ideal for solar or battery powered gate applications
5001-10-CHARCOA

Residential Side & Top Weather-Strip 10' Long - Charcoal

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
  • Sold by full case quantity (20)
5001-8-CHARCOAL

Residential Side & Top Weather-Strip 8' Long - Charcoal

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
  • Sold by full case quantity (20)
1104-ASFT-24FT

Elton Aluminum Stiffener for 1104 24ft

  • Prevents the 1104 from buckling in the hot sun
1104-ASFT-9FT

Elton Aluminum Stiffener for 1104 9ft

  • Prevents the 1104 from buckling in the hot sun
HDC-411-LH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Left Hand

  • 1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
  • Solid state circuit board Lynx-6000. Built in 1.5 second delay.
  • 5L V-belt primary reduction #50 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Precision pillow block bearings on output shaft.
  • Fully driven adjustable limit switches.
    • .......more details
Sell Sheet
GUIDE014

Manaras Chain Guide

CAPACITOR008R

Manaras Capacitor 440-648uf incl. Bleeder Resistor

  • Used for 3/4 HP 120/230VAC 1 ph motor255 374 & 258
  • Also for 1 HP 120/230V 1 ph motor350
MH00001

Micanan Bronze T-Bushing 3/8" ID

  • 2 required per operator
50346

Doorlec Electric Switch and housing for Mechanical Edge

10-1000-BAR

Strip Curtain Universal Mounting Bar Pre-Studded Angle Sold per foot

  • Includes: 1 cinch plate and 2 wing nuts which covers 6 of the pre-studded bolts at one time making installation and maintenance easy.
10-1000-14FT

Strip Curtain 14' x 48" Angle Mount - 8" LT PVC - 4" O.L Clear

  • 14 ft wide x 48" high
  • Mounting bar sold separately
MT-UHF-0-0

AWID Long Range Metal Mount Tag

  • For use with LR-2000 and LR-3000 readers
  • Operating temperatures from -58°F to 185°F (-50°C to +85°C)
  • Reading Distance up to 25 feet
  • Battery not needed passive tag
  • Passive RFID technology with excellent-price-to-performance ratio
  • Proprietary encryption for protection of card data
    • .......more details
GH4416-09-R

Green Hinge #9 12-ga Right Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-07-L

Green Hinge #7 12-ga Left Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-06-L

Green Hinge #6 12-ga Left Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-05-L

Green Hinge #5 12-ga Left Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
PIN016

Manaras Coupling Pin 3/8" for MJH

  • 4 required for MJH manufactured prior to 1998
  • 2 required for MJH manufactured after 1998
737

Fasteners Round Head Carriage Bolt 3/8-16 x 3/4" 1000/Box

  • Gr. 5 Zinc
ME123-C3

Miller Edge L-Shaped PVC Mounting Channel Sold by the Foot

  • 2" Wide 1-1/4" High
30B530

LiftMaster Capacitor 56uF 220V ** DISCONTINUED

  • Same as LiftMaster # 30B620
MA013

LiftMaster Shear Pin #6 (Standard)

  • For barrier gate operator models: MADCBB MATDCBB MASDCBB & MASTDCBB
  • Use Shear Pin #7 ( MA0137 ) if hole shows sign of wear
IG2-K10-30

Invisi-Guard-2 Photo Eye Kit 30ft Battery Powered *** Discontinued

  • The Invisi-Guard-2 thru beam photo optic system sends an invisible beam of light from a transmitting unit to a receiving unit.
  • The light beam is intended to function as a protective line guarding a potentially hazardous zone.
  • When the light beam is interrupted by an obstruction a signal is sent to the motor controls to stop or reverse motion
  • Universal Design Works with Pre and Post 2010 Operators
  • Spans Distances up to 30 feet (model dependent)
  • Time Saving Installation
    • .......more details
Installation ManualSell Sheet