Devanco Canada - Get The Right Garage Door Opener‎ and Parts

36773S

Genie Carriage Assembly for 8' Door

Works on Genie IntelliG 1000 & 1200 Garage Door Openers
Includes: carriage emergency release rope and straight arm.
Carriage assembly connects to the shuttle assembly and in turn creates the manual release function for the garage door.

33101

Overload 0.90 to 1.50A

Setting range 1.1 - 1.6A

886LMW

LiftMaster Motion-Detecting Control Panel Sec+ 2.0 Wi-Fi

Push button for garage door operation
Motion-detector automatically turns on the light when movement is detected
150 degree sensing angle for motion sensor
Program remote controls and set up Wi-Fi directly from the control panel
Light run-time is 4 1/2 minutes with adjustable light timer option
On/Off switch for deactivation of motion-detecting function

.......more details

CF-101-18

Commercial Side & Top Weather-Strip 18' Long Aluminum / Vinyl

Same as Garaga CF101

SL-300T

Skylink 1-Btn Visor Mount Transmitter 300MHz ***No Longer Available

Easy to carry or clip on sun visor.
Works in conjunction with Skylink Universal Receiver: Model SL-300R.
Operating range of 100 feet and more.
12V alkaline battery included.

VBELT_5L370

Manaras VBelt 5L 37" - repl. by B34

5L370

LB406-14

Laminated Bumper Standard Black 6" x 14" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

GH-3-LH

Doorlec Industrial Jackshaft Door Operator 3 HP 575V 3P TEFC Motor Left Hand

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

PRO-HB-5053U-LH

Micanan 1/2HP 575V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

MV-00278

Micanan Cutler Hammer Reflective Photocell Kit 24V 0-25ft Range w/Brackets (MK00371/MV00371) *** No Longer Available. Use 60-2728 instead

Includes eye reflector and bracket
Same as MK00371 Eaton 1450E-6514

PRO-GH-5011U-R

Micanan 1/2HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PIVIN-BCSI

Special Order BCSI Gate Operator ** Price by Quote Only

12124

Doorlec Coupling 2-3/4" x 1"

Used on model SGP

41A3588-1

LiftMaster Belt Idler Pulley and Bracket (Built Years Pre-2000)

��This is a Belt Pulley Bracket Replacement Kit. For use with various LiftMaster® and Chamberlain® Belt Drive Garage Door Openers.
Works on models 1270. 1280 & 1280R

STRUT-3-18'

Door Strut 3" Hemmed 18ft Long

Reinforcement bar 3"

12577

Doorlec Clutch Disc Fiber 1 1/2" (3.75 cm)

Fits model SGP

26CW945255-CUT

Truck Door Intermediate Panel (15.5" x Cut-to-Size ) Painted White for Whiting Dryfreight

These panels are cut to customer's exact measurements.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

TRACK-2"-RAW-10

Raw Vertical Track 2" 10'-0" Sold per Piece

120" long 10'-0"

DM54LC-COATED

Cable Drum High Lift 54" 400-54HL Specialty Coated Pair

Use for Commercial Highlift Doors
Maximum Door Height 120" + Highlift
Maximum Highlift 54"
Lifting Weight Per Drum 275 lbs.
Resists Chemical/Moisture Corrosion
Abrasion Resistant

.......more details

PRO-TB-7583-U

Micanan 3/4HP 208V 3 P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

MU-00005

Micanan Hand Crank Handle 6' Long

For hand crank operation in lieu of hand chain and pocket wheel

VBELTB30

Manaras VBelt 5L 30" Type B (5L330)

For models OTH OTBH OSL
Same as 5L330

PRO-H-5011U-RH

Micanan 1/2HP 115V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

Installation manual Specification sheet

PRO-H-5053U-LH

Micanan 1/2HP 575V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

Installation manual Specification sheet

D-2-8

Keyed Disconnect Device 8ft Cable

Operated from the outside to disconnect the trolley for manual operation of the door
Must specify if keyed alike is required or keyed random will be shipped
Mounting plate dimensions: 2 1/2” x 1 3/32”

MM00155

Micanan Disconnect Arm PRO-HR

MOTOR274

Manaras Electric Motor 3/4HP 575V 3PH

��This item is compatible with BRAKE011

41A5047

LiftMaster Door Bracket Kit

Also known as: 12C582 12B198 12B374 062265 41A5047 12B374-2
Includes door bracket clevis pin and lock ring

19054

Doorlec VBelt 5L380

works on model SWGO

SD751L5-RH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 115V Right Hand (Must include hardware box)

Perfect for split and sliding doors involved with industrial applications.
It is installed above the door and corresponds with the direction the door will be traveling.
Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
Built In Security+ 2.0 radio receiver
Solenoid brake included

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

SF600U-114

Spring Fitting 6" Pair for 1-1/4" Shaft

Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
Pair includes: (1) winding & (1) stationary.
Not single thread.
Winding bar hole 5/8"

MB-03204

Micanan Electric Motor Only 1 HP 575V 3PH C-Flange TEFC 56C

Fits GT GH GHC & GSD

ULT-MVP-2-D-TEK

EMX Industries Multi-Voltage Loop Detector 2-Channel (ULT-MVP-2U)

Combines small size with 9VDC to 240VAC input range.
Size: 73 x 38 x 78mm
ULTRAMETER™ display indicates the appropriate sensitivity setting the vehicle positioned on the loop
Ten (10) sensitivity adjustments
Four (4) frequency settings
Automatic sensitivity boost (ASB) delay fail-safe/fail-secure and infinite or normal (5 min.) presence

.......more details

5001-14-BLACK

Residential Side & Top Weather-Strip 14' Long - Black

PVC wrapped
Painted aluminum retainer
Dual fin vinyl

8360WLB

LiftMaster 3/4 HP DC Premium Series Chain Drive Wi-Fi Lock with BBU Capability **To extend of inventory

Built-In Wi-Fi® for the easiest way to connect the garage.
Real-Time Alerts indicate the status of the garage door via email or push notifications.
Monitor and Control the opener from anywhere using mobile devices.
Consume up to 75% less power in standby mode.
Soft Start/Stop for smooth operation.
Safeguard your household with Security+ 2.0™-with every click a new code is sent to the Garage Door Opener so the door opens only for you.

.......more details

21702

Doorlec Close Auxiliary Switch Double Limit DAT

BCH751L5-LH

LiftMaster Hoist Op. with Carwash Mod. and Brake 3/4 HP 115/230 VAC Logic 5 Left Hand ***Replaced by CRBH751-LH

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with either CPS-UN4
Brake installed on operator

Installation manual Manuel d'installation Sell sheet Brochure

PROROLL4

Cantilever Roller 4" Round Post with Covers Sold as a Pair *** Discontinued

3100 pound rating
Integrated polyurethane cover for safety ensuring UL325 compliance
Sealed bearings for maintenance-free operations
DuPont™ Delrin® injection molded for smooth quiet movement
High-precision roller for water resistance and industry's best overall temperature rating

GAREX-EB-PLATE

Garex End Bearing Plate 3-3/8" Special Order

GD-STEND-18D

End Cap Steel 18G 18" Double 1-3/4"

PEDALU72

Aluminum Pedestal Post 72"

Pedestal post with hood
High quality aluminum
72 inches
Dual face-plate allows for easy wire connections

Shop drawing

ALUM-547

Aluminum 24" x 100' Spool Sable / Sablon # 547

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 547
Reverse side is #431 Bright White

Colour chart

790919

FAAC Control Board 115V for 455D

PRO-LH-5011R-RH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft with Contactor Right Hand (PRO LHR)

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
No longer available in contactor model (2017)

Installation manual Specification sheet

65-32449

LiftMaster Thermostat Control Heater 115V & 575V Fin Type ** Discontinued

Designed to automatically maintain a suitable temperature inside a control enclosure down to -40 degrees F.
Uses a high surface area aluminum heat emitter to eliminate the need for a fan
Provides low-radiation and high-convection heating in the enclosure
Adjustable from 30 degrees to 120 degrees F. (0 to 50 degrees C.) 208V - 460V
Compatible with operators SL575 SL585 and SL595

2650-112-05

Linear Cold Weather Package 230V SLC gate Op. Only

Cold weather package includes: Arctic oil Heater Cogged V-belt

SLR-221

Linear Residential Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
Continuous-tone entrapment alarm with reset button
LED diagnostic display for ease of setup and troubleshooting
Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
Regulated 24 Volt DC power available for access control accessories
Integrated maximum run and auto close timer (0-9 minutes)

.......more details

0-7530-444

FHP Electric Motor 1/3 HP 110V 1625 RPM Motor A099231

HTRNB

LiftMaster Heater Kit for AC Pad Mount Gate Operators

Heater kit for pad mount AC gate operators.
Battery bracket NOT included.
Protects system to -40° F and installs on operator frame
Measurements: 6 x 2 3/8 x 3 3/8

41D8181

LiftMaster Cover

SA-TORSION-ASSY

Complete Torsion Assembly Special Order

Special order

WD-327310

Wayne Dalton 3-Btn Mini Transmitter 372 MHz 3973

Keychain Model but also comes with a Visor Clip
Homelink Compatible
Size: 2-1/2"" x 1-1/2"
Works with Wayne-Dalton Models: Classic Drive: 3014 3018 3514
Quantum: 3214 3314 3316 3414
ALL I-Drive Models

.......more details

E/BLOP/128

Double Channel Loop Detector- factory installed on logic

5001-WG-8-MOAK

Residential Side & Top Weather-Strip 8' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

Q085

LiftMaster Dolly Cover HCT K09-50756

Same as K09-50756

PPLV1

LiftMaster Passport Lite 1-Button Visor Remote with Sec+ 2.0 Technology

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Block coded

.......more details

Programming instructions Instructions de programmation Sell sheet Brochure

L-7-50-0-M

Cable Tie Standard 50 LB Black 7" Nylon 1000/pkg

Ultraviolet Resistant

LVB620-11

Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

SF375-DUPLEX

Spring Fitting 3-3/4" Stationary Side Only for Duplexing (Short Ear). *** Not Sold As A Pair

To make duplex assemblies you require one pair of SF600 (W & S) and only two SF375-DUPLEX stationary plugs only no need for P375 winding plugs

2B737

LiftMaster Output Board EL25

Output board for models EL25 and EL2000 (041B0737)

2594

Whiting Bearing Retainer

3950

LiftMaster Jackshaft Door Operator for Comm. Rolling Sheet Doors

Designed for commercial rolling sheet door applications only - ideal for self-storage facilities.
It may be used on commercial rolling sheet doors with live or dead shaft measuring up to 12 ft. high and up to 14 ft. wide but not exceeding 650 lbs.
Maximum recommended duty cycle: 10 cycles per hour.
UL-Listed and UL-Labeled to insure compliance to local codes and approval at final inspection
Heavy-duty 24V DC motor provides ultra-quiet operation
Push button limit setting

.......more details

Installation manual Sell sheet

4X20PO50

Devanco Loop 4' x 20' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

MB-02002

Micanan Electric Motor Only 3/4HP 110/220V 1PH TEFC

Base mount motor fits: TW TBW JW HW HHDW SDW

C20-32F

Bearing 1-1/4" x 2" Press Fit C20-32F+GR 400 LBS

Stamped bearing for lighter loads
For a heavier duty machined bearing use R5114

ME123-M-BLK-LH

Miller Edge Black LH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

PULLEY007

Manaras Clutch Pulley 8" x 1" bore

20-1050B-2RLP

LiftMaster Electric Motor 1/2 HP 115/230V 1P Base Mount

Replacement motor for APT
Also known as 20-1050B-2RL 20-1050B-2R K20-1050B2R
For L3 and L4

MU22-2WIRE-E-B

Miller Edge MU22 2-Wire End Black - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

7272105

FAAC 400 Cover

MGS20-Y-2U-04

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 4ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

PRO-HBH-7523U-R

Micanan 3/4HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

3/4 HP230V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

HTUS

Stainless Steel Garage Door Top Roller Bracket 12-Gauge Single Slot

Manufactured with 12ga. Rust-Resistant 304 Stainless Steel
Universal Design
Adjustable from 2"-3-1/2"
Fits Most Overhead Sectional Doors
Priced Per Each

50ACTWF

LiftMaster Receiver Logic Board AC WiFi*** Discontinued and replaced by the 050ACTBMC

This is a 315MHz Security+ 2.0® Receiver Logic Board featuring Wi-Fi with MyQ® technology.
For use with various LiftMaster® and Chamberlain® AC Chain or Belt Drive Garage Door Openers; manufactured after 2011.
The unit will feature a yellow learn button
Also known as: 1D8088-1 045ACTWF 1D8808-3 041D8088 50ACCL5
Same as 050ACTWF
1 Year Warranty

.......more details

36764A

Genie Chain and Belt Pulley (#39591A)

Works on Genie IntelliG 1000 & 1200 Garage Door Openers
Both for Chain and Belt Openers
Front Idler Pulley for Genie 4024
New part number #39591A

ST-ENDCAP

Soft Touch End Caps Sold Individually

ST-CLEAR-TUBE

Soft Touch Clear Tubing Sold per Foot

VBELT_5L340

VBelt 5L 34"

Fits Lynx HDC operator

.393-6-R

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

R5202

Pulley 3" Zinc Plated Steel with Sheave Strap

Bored for 3/8" diameter bolt
Maximum cable diameter: 3/16"
Hardened inner race.

MK-00011

Micanan Radio Control Terminal Strip

MO00003

Micanan Compression Spring for PRO-H/HB

0.80 ID x 0.092G x 1.80 Long

11-10705

LiftMaster Output Shaft MH

.363-6-R

Cut-to-Length Torsion Spring .362 x 6" Right Hand Wound Green/White

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

EQ2722

SkyLink 3/4 HP Garage Door Opener with 2 2-Btn Keychain Remotes ** Discontinued

The DC motor offers additional benefits with very quiet operation and much less vibration.
It is ideal for garage doors that are below a living room or bedroom.
The DC motor also offers the soft start soft stop features which reduces the vibration and wear and tear of all the mechanical parts
Features: Rolling Code Technology Soft Start Soft Stop Optimal Force Learnings and Safety Beam Sensors.
Available in either Belt or Chain drive
Includes two 2-btn keychain remotes # MK318-2

.......more details

Installation Manual Sell Sheet

7001-WG-10-DO

Residential Wood Grain Side & Top W/S Dark Oak 10' Long - Painted Screws to Match

Dark Oak retainer with Dark Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

EL2000SS

LiftMaster Telephone Entry Access Control System Stainless Steel ***NLA

A high-capacity telephone entry access control system designed to complement virtually any gated community.
It is flexible enough to be used in apartment buildings condo complexes office parks and commercial sites.
features a 5-inch backlit LCD screen and clearly displays up to 4 lines with 20 characters per line making it a great choice for multi-tenant installations
Entry Codes allow for 2000 4-digit codes to be programmed. The codes can be time-restricted and/or use restricted. The codes can be split up any way you choose; 500 directory codes 1000 card codes 500 entry codes for example •Transaction Monitoring stores a maximum of 8000 transactions including date time identification and transaction type.
Activity Reporting gives property managers the ability to print database system and history reports.
Call Forwarding and Do Not Disturb schedules can be programmed for every resident.

.......more details