Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
K75-19985

LiftMaster Clutch Pulley Assembly

  • Fits model H operator with Logic 5
42-31246

LiftMaster Terminal Block 20A 600V

  • 3-position
26-94623

Truck Door Top Panel (13" x 98") for Whiting DryFreight

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • .75" thick 7 ply exterior grade medium density plywood
  • Primer finish
71B240G

LiftMaster Brake Kit 230/240V with Solenoid Field Install SL585 and SL595

Instruction Manual
7001-18-SANDSTN

Commercial Side & Top Weather-Strip 18' Long - Sandstone (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (10)
V1104-GREY

Replacement Vinyl Only for 1104-Grey 200ft Roll

  • Sold in 200 ft rolls only
165-B

Fusible Link For Loads 1 to 10 lbs

  • Length is 1.4328" width is .563"
  • Distance between center is .938"
  • Priced per each
  • Fire rated at 165 degrees Fahrenheit
915007048X

Extension Cable 1/8" 7x19 14' Sold as a Pair

  • Cable assembly for extension spring door - looped on one end the other is raw (no stops)
1104-7FT-CHARCL

Residential Side & Top PVC Weather-Strip with cap 7' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
12-000I-KEY

Spare Key for American Access Keypad

  • Spare key only for model 12-000I
1104-7FT-GREY

Residential Side & Top PVC Weather-Strip with cap 7' Long - Grey (G)

  • Grey rigid vinyl retainer with grey flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
466LMC

LiftMaster Wireless Commercial Keypad 390 MHz ** Discontinued

  • Up to 100 000 individual codes
  • Mounts to wall or gooseneck post
  • Incl. 6-volt alkaline battery
  • Illuminated stainless steel faceplate and keypad
  • Tamper-resistant case and "low battery" indicator
  • Requires 412HMC receiver
    • .......more details
Installation ManualSell Sheet
2704.177_270

Whiting Roadside Torsion Spring 2-3/16" ID 27" Long

  • Torsion spring wire only
  • .177 wire size
2704.171_250

Whiting Roadside Torsion Spring 2-3/16" ID 25" Long

  • Torsion spring wire only
  • .171 wire size
SEDK2641A4

Erone Wireless Radio Keypad 433 MHz

  • Wireless RF Digicode® keypad.
  • Frequency: 433.92 MHz.
  • For automatic door opening in sequential mode.
  • 6 channels to control 6 different relays or 6 different RF receivers.
Programming InstructionsWireless System Chart
510.3920.06

Whiting Stainless Steel Rivets Option for Dry Freight Door 4-Rows of Hinges 6 Panels

  • Upgrade option
MK-00014

Micanan Reversing Relay 220VAC Coil DPDT (Flange Mount)

  • 8-pin
36163R

Genie Dual Frequency Intellicode Receiver 315 MHz & 390 MHz

  • For Genie Intellicode Rolling Code remotes Or Overhead Door Code Dodger remotes using the 315 or 390MHz frequency.
  • 24-Volt 3-Wire Connection For Garage Door Opener And Gate Openers.
  • Accepts Up To 8 Genie Intellicode Or Overhead Door Code Dodger remotes on 315 or 390MHz Frequency. Note: Will not work with the older code switch type of remotes.
65853

Marantec Programming Wire - Old ML to New M3

  • Used when programming old style remotes to the newer style 3 series remotes and Wireless Keypads.
990LM

LiftMaster Surge Protector ** NLA

Installation ManualManuel d'Installation
41A1037

LiftMaster Chassis Bracket

  • To correct higher level of noise than normal due to vibration from the powerhead.
  • Fits models 1355 3255 3270 3265-267 made between Jan-March 2014.
PEDALU42

Aluminum Pedestal Post 42"

  • Pedestal post with hood
  • High quality aluminum
  • 42 inches
  • Dual face-plate allows for easy wire connections
Spec SheetShop drawing
2X6SC50

Devanco Loop 2' x 6' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
SOLID_SHAFT_10'

Solid Shaft 1" Keyed 10 ft Galvanized

  • Actual length is approx. 10'-1"
SOLID_SHAFT_8FT

Solid Shaft 1" Keyed 8 ft Galvanized

  • actual length is approx. 8'-1"
1005-1-3/4-12

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4"
3AG2

Miniature Fast Acting Glass Fuse 2 Amp 250V (5/pkg) - 766122

  • 6 x 30mm miniature fast acting glass fuse
  • Rated voltage: 250V
  • Rated current:2A
  • ROHS compliant
WKP250LM3

LiftMaster Wireless Keypad 250-Code ** Replaced by KPW250

  • Wireless access control keypad
  • 250 code capacity - 4-digit codes
  • Wireless control of up to 4 doors or gates with additional GCUs
  • Post or surface mount standard
  • 900MHz
  • Compatible with GCU and LiftMaster® 315MHz rolling code receivers
    • .......more details
Programming Instructions
1013-1-1/4-14'

Rigid Vinyl Bottom Retainer L-Shaped 14' Long

  • For door thickness: 1-1/4"
1013-1-1/4-16'

Rigid Vinyl Bottom Retainer L-Shaped 16' Long

  • For door thickness: 1-1/4"
12FT-TROLLEY-SET

LiftMaster 12' Track Set for Trolley Operator 10-5812-P (2pcs) *Actual length 179"*

  • Actual length: 179" (14' 11")
41A7756

LiftMaster End Panel with Light Socket for 8557

PRO-TB-5011-R

Micanan 1/2HP 115V 1P Trolley Operator with Brake - Contactor

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
.218-258-L

Cut-to-Length Torsion Spring .218 x 2-5/8" Left Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.207-258-R

Cut-to-Length Torsion Spring .207 x 2-5/8" Right Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.262-2-L

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.207-2-L

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
PD86CNP12QPMU

Carlo Gavazzi Photoelectric Switch Retro Reflective 12-24V AC/DC

  • Reflector (ER4) not included
Installation Manual
.243-134-L

Cut-to-Length Torsion Spring .243 x 1-3/4" Left Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.225-134-R

Cut-to-Length Torsion Spring .225 x 1-3/4" Right Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.207-134-R

Cut-to-Length Torsion Spring .207 x 1-3/4" Right Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
G3T-BX

Genie 3-btn Dual Frequency Transmitter 37218R

  • This transmitter replaces all Intellicode and Overhead Door Code Dodger transmitters made after 1997.
  • For Intellicode operators pre-1997 use GITR3 for best results
  • Operates with 315 & 390 MHz Intellicode 2 technology
  • Able to control up to 3 garage doors
  • Visor clip and battery CR2032 included
  • Replaces: GIT GIC90 GMIC90 G2T OCDT ACSCTG TBSTG GIT-1 GIT-2 GIT-3 ACSCTG Type 1 ACSCTG Type 2 ACSCTG Type 3 TBSTG GIC90-1 GMIC90-3 GIC90-2 GMIC-3BL GIC90-3 OCDT-1 OCDT-2 OCDT-3 G2T-1 G2T-2 G2T-3 GICTD-1 GICT390-1 GIFT390-1 GIT390-4
    • .......more details
Programming InstructionsInstructions de programmation
C-258-INSTALLED

Cones 2-5/8" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF258
.283-258-R

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
7001-12-W/B

Commercial Side & Top Weather-Strip 12' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
ME123-BLK-RH

Miller Edge Black Right Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
.319_6"-LH

Torsion Spring .319 x 6" x 12ft LH Blue/Green

  • Wire size: .319
  • Inside diameter: 6"
  • Length: 12 ft
.331_5-1/4"-LH

Torsion Spring .331 x 5-1/4" x 12ft LH Red/White

  • Wire size: .331
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.283_5-1/4"-LH

Torsion Spring .283 x 5-1/4" x 12ft LH White

  • Wire size: .283
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.421_3-3/4"-LH

Torsion Spring .421 x 3-3/4" x 12ft LH Gold

  • Wire size: .421
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.319_3-3/4"-LH

Torsion Spring .319 x 3-3/4" x 12ft LH Blue/Green

  • Wire size: .319
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.312_2-5/8"-LH

Torsion Spring .312 x 2-5/8" x 12ft LH Yellow

  • Wire size: .312
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.262_1-3/4"-LH

Torsion Spring .262 x 1-3/4" x 12ft LH Red/Yellow

  • Wire size: .262
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.192_1-3/4"-LH

Torsion Spring .192 x 1-3/4" x 12ft LH Silver

  • Wire size: .192
  • Inside diameter: 1-3/4"
  • Length: 12 ft
29-31245

LiftMaster Relay 12VDC 250VAC 4-Pin SPDT C & D relay 3-phase only

  • C & D relay 3-phase only
19-50HL

Half (Offset) Link #50

  • Half link for #50 chain
  • ANSI Standard Carbon Steel
30B363

Capacitor Motor Start 53 uF - 64 uF 220V *** No Longer Available

19-40HL

Half Link #40

  • Half link for #40 chain
  • ANSI Standard Carbon Steel
41A4916

Gel Wire Connectors 19 to 26 AWG 100/ box

T-733

FL-Allstar 3-btn 3-Door O/C/S Transmitter 107477-311 MHz

  • This transmitter can control (open-close-stop) up to three doors.
  • It has a eight switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 733T (190-107477)
  • Dimensions: 6 1/4" x 3 3/8" x 1 3/8".
Programming Instructions
T-833

FL-Allstar 3-btn 3-Door Transmitter 108817-311 MHz

  • This three channel transmitter controls up to three doors (open-close) or one door (open-close-stop).
  • It has a height switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 8833T (190-108817)
  • Dimensions: 4 5/8" x 2 1/4" x 7/8"
Programming Instructions
144C56

LiftMaster Idler - Cable Pulley for chain drive

  • For square rail assemblies
  • Same as 144C0056
.437_6"-RH

Torsion Spring .437 x 6" x 12ft RH Red/Green

  • Wire size: .437
  • Inside diameter: 6"
  • Length: 12 ft
.331_6"-RH

Torsion Spring .331 x 6" x 12ft RH Red/White

  • Wire size: .331
  • Inside diameter: 6"
  • Length: 12 ft
.468_3-3/4"-RH

Torsion Spring .468 x 3-3/4" x 12ft RH Blue/Orange

  • Wire size: .468
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.312_3-3/4"-RH

Torsion Spring .312 x 3-3/4" x 12ft RHW Yellow

  • Wire size: .312
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.250_2-5/8"-RH

Torsion Spring .250 x 2-5/8" x 12ft RH Green

  • Wire size: .250
  • Inside diameter: 2-5/8"
  • Length: 12 ft
12563

Doorlec Upper Brake Shoe - Right

  • Fits on all Doorlec operators equipped with brake shoes
  • Use with drum #12561
TRANSF088

Manaras Transformer 480-24V 40VA

  • Transformer 480V Primary 24V Secondary 40VA
8331.96

Whiting Brush Top Seal assembly 96"

  • Fits Coldsaver and Tempguard
2236.096

Whiting Coldsaver Intermediate Panel 12-1/2" x 96"

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
HAE00002

Linear Safety Beam Set *** No Longer Available

  • Set includes: Sender and Receiver photocells wire and connectors
  • Safety beams will work with all Linear operators that currently have safety beams installed.
7952

Whiting Truck Door Stud Plate Gasket

7176.225_31.93

Whiting Heavy Duty Torsion Assembly .225 x 31" shaft 93"

RV-100

1" Vinyl Insert for Brush Retainer per foot

  • Color: Black
  • Fits in light brush retainers
600BL

6" Light Brush Insert 6ft Long

  • Polypropylene bristles
4008-6FT

Aluminum Retainer only for Light Brush 6' Long 180 degree 5/8" Offset

  • 2" with 5/8" Offset
  • For use with Light Brush or Vinyl Insert
4007-8FT

Aluminum Retainer only for Light Brush 90 degree

  • For angle application
  • For use with Light Brush or Vinyl Insert.
4006-12FT

Aluminum Retainer only for Light Brush 12' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
4003-12FT

Aluminum Retainer only for Light Brush 12' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
1009-1-3/4"

Bottom Nail-On for Wood Door Heavy Duty per foot

  • For 1-3/4" commercial doors.
  • Color: Black
1019-1-3/8-12'

Rigid Vinyl Bottom Retainer Flat 12' Long

  • Black - for door thickness of 1-3/8"
1014-1-5/8-24'

Rigid Vinyl Bottom Retainer Notched 24' Long

  • Black - for door thickness of 1-5/8"
1006-2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1006-2-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1006-2-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1006-1-3/8-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/8"
1006-1-1/2-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1003-2-24'

Aluminum Bottom Retainer L-Shaped 24' Long

  • For 2" thick doors.
1003-2-12'

Aluminum Bottom Retainer L-Shaped 12' Long

  • For 2" thick doors.
1003-1-5/8-24'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
  • DIE # ES18010
1003-1-5/8-12'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
7001-10-BROWN

Commercial Side & Top Weather-Strip 10' Long - Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1104-14FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 14' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-8FT-SAND

Residential Side & Top PVC Weather-Strip with cap 8' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
1104-14FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 14' Long - White (W)

  • White rigid retainer with white flexible vinyl.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1106-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black

  • Aluminum retainer with black dual fin vinyl
1001-24-GREY

Commercial Side & Top Weather-Strip 24' Long - Grey

  • Aluminum retainer with grey dual-fin vinyl
  • Sold by full case quantity (10)
1102-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
1001-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black

  • Aluminum retainer with black dual-fin vinyl