Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
EQ2712

SkyLink 3/4 HP Garage Door Opener with 1 Remote ** Discontinued

  • The DC motor offers additional benefits with very quiet operation and much less vibration.
  • It is ideal for garage doors that are below a living room or bedroom.
  • The DC motor also offers the soft start soft stop features which reduces the vibration and wear and tear of all the mechanical parts
  • Features: Rolling Code Technology Soft Start Soft Stop Optimal Force Learnings and Safety Beam Sensors.
  • Available in either Belt or Chain drive
Installation manualSell sheet
SLR-221

Linear Residential Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

  • Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
  • Continuous-tone entrapment alarm with reset button
  • LED diagnostic display for ease of setup and troubleshooting
  • Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
  • Regulated 24 Volt DC power available for access control accessories
  • Integrated maximum run and auto close timer (0-9 minutes)
    • .......more details
7001-18-CHARCOL

Commercial Side & Top Weather-Strip 18' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
7001-14-CHARCOL

Commercial Side & Top Weather-Strip 14' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
7001-8-CHARCOAL

Commercial Side & Top Weather-Strip 8' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
1104-14'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 14' Long - Light Bronze (F)

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-7FT-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 7' Long - Light Bronze (F)

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
HTRNB

LiftMaster Heater Kit for AC Pad Mount Gate Operators

  • Heater kit for pad mount AC gate operators.
  • Battery bracket NOT included.
  • Protects system to -40° F and installs on operator frame
  • Measurements: 6 x 2 3/8 x 3 3/8
PRO-H-7511U-RH

Micanan 3/4HP 115V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
Installation manualSpecification sheet
PPLV1

LiftMaster Passport Lite 1-Button Visor Remote with Sec+ 2.0 Technology

  • Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
  • These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
  • Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
  • Block coded
    • .......more details
Programming instructionsInstructions de programmationSell sheetBrochure
201-300-401-00

Equinoxe Long Range Transmitter O/C/S for 8-Doors 433 MHz Pre-2016

  • Open/Close/Stop remote for 8 doors
  • Range of approx. 1000ft
  • A heavy-duty remote for Industrial applications
  • Old generation- prior to 2016
Programming InstructionsInstructions de programmation
6944.1

Whiting Top Closure Assembly Stainless Steel Dry Freight

  • This is a Whiting original part
T-832-M-H

FL-Heddolf 2-btn Mini Transmitter P219-2K-311 MHz (T-832-M-S)

  • Open/Close mini remote for 2 doors
  • Keychain and 12V battery included
  • Compatible with Keystone T-832-H and old Allstar T-832
  • 8 dip switch
  • Same as P219-2K
Manual
SF375-DUPLEX

Spring Fitting 3-3/4" Stationary Side Only for Duplexing (Short Ear). *** Not Sold As A Pair

  • To make duplex assemblies you require one pair of SF600 (W & S) and only two SF375-DUPLEX stationary plugs only no need for P375 winding plugs
MK-00042

Micanan Overload Reset 1-Phase 13 Amps

CS303-DB100

EMX Car Sense Direct Burial Sensor with 100 ft Lead Wire *** Replaced by LRS-DB-100

  • Can be used for above ground applications ie.. strapped to a post or wall
  • Easy low cost installation
  • Small size of the detector allow for easy installation in pavement
  • Rugged sensor is also suitable for above grade installations
  • Includes direct burial sensor and 100 ft of lead wire
  • Advanced 3-axis technology for better detection
    • .......more details
3950

LiftMaster Jackshaft Door Operator for Comm. Rolling Sheet Doors

  • Designed for commercial rolling sheet door applications only - ideal for self-storage facilities.
  • It may be used on commercial rolling sheet doors with live or dead shaft measuring up to 12 ft. high and up to 14 ft. wide but not exceeding 650 lbs.
  • Maximum recommended duty cycle: 10 cycles per hour.
  • UL-Listed and UL-Labeled to insure compliance to local codes and approval at final inspection
  • Heavy-duty 24V DC motor provides ultra-quiet operation
  • Push button limit setting
    • .......more details
Installation manualSell sheet
MB-02002

Micanan Electric Motor Only 3/4HP 110/220V 1PH TEFC

  • Base mount motor fits: TW TBW JW HW HHDW SDW
C20-32F

Bearing 1-1/4" x 2" Press Fit C20-32F+GR 400 LBS

  • Stamped bearing for lighter loads
  • For a heavier duty machined bearing use R5114
28020004-500

Cable Stainless 1/16" 1x19 500' Inox *** Price on Request

  • Not for use in aircraft applications
  • 1x19 contruction type 302 / 304
Comparison charts
K20-1050B-2TLP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph L3 L4 TEFC

80-2103

LiftMaster Tinnerman Nut **DISCONTINUED

  • Black Plastic Knob
  • Formerly 802103 G802103
  • For SW470 with GL or S3 Board
ME123-M-YEL-RH

Miller Edge Yellow RH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
ME123-M-BLK-LH

Miller Edge Black LH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
39142R

Genie Aladdin Connect

  • Aladdin Connect™ controls and monitors your garage door opener with your smartphone
  • Compatible with smartphone iPad(R) & tablet devices
  • Easy installation & setup
  • Operates up to 3 doors with 1 system
  • Able to program timed closed functions
  • Wi-Fi communication Retro-fit capable Works with all brands
    • .......more details
Quick set-up guideGuide d'installation rapide
9382263800

Square Torsion Spring .375 x 6 x 38" with Cones RHW 1-1/4" Bore

PULLEY007

Manaras Clutch Pulley 8" x 1" bore

MU22-2WIRE-E-B

Miller Edge MU22 2-Wire End Black - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
MU22-2WIRE-E-Y

Miller Edge MU22 2-Wire End Yellow - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
7272105

FAAC 400 Cover

17-2701

LiftMaster Pulley 7" x 5/8" (G172701)

  • Same as G172701
MGS20-Y-2U-04

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 4ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
FL-T50

FL-Heddolf 1-Button Dip Switch Remote FL 311MHz *** Discontinued.

  • ID220-1KA Heddolf remote
  • 9V battery & metal clip included
HTUS

Stainless Steel Garage Door Top Roller Bracket 12-Gauge Single Slot

  • Manufactured with 12ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Adjustable from 2"-3-1/2"
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
MX00140-NEW

Micanan Brake Assembly for PRO-TB/APTB NO Solenoid - New Model (SBR-N1-00-TTBPAPT)

36764A

Genie Chain and Belt Pulley (#39591A)

  • Works on Genie IntelliG 1000 & 1200 Garage Door Openers
  • Both for Chain and Belt Openers
  • Front Idler Pulley for Genie 4024
  • New part number #39591A
104255

Allstar Clip only for 8833TC

  • Clip only
ST-CLEAR-TUBE

Soft Touch Clear Tubing Sold per Foot

.393-6-R

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Orange

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Orange

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
10-3209_GATE_BRKT

LiftMaster Gate Bracket

  • Fits SL580GL SL595GL and new IHSL24UL INSL24UL models
MK-00011

Micanan Radio Control Terminal Strip

MG00021

Micanan Flat Washer 7/8" ID x 1-1/8" OD

MO00003

Micanan Compression Spring for PRO-H/HB

  • 0.80 ID x 0.092G x 1.80 Long
11-10705

LiftMaster Output Shaft MH

OTH-6112-ECB

Manaras Trolley Operator 1/2HP 120V 1Ph with Electronic Circuit Board

  • The OTH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
Installation ManualSell Sheet
.363-6-R

Cut-to-Length Torsion Spring .362 x 6" Right Hand Wound Green/White

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
D6375-164

Cable Drum High Lift 164" 1" Bore Torque Force Pair

  • Maximum hi-lift: 164"
  • Capacity: 800 lbs per drum
  • Cable length: Floor to shaft center 181" minus amount of Hi-Lift
  • Cross reference: DNS 410-164 OMI 164HL M162-4165
RESET007

Manaras Resettable Overload Fuse 10A 1 Phase

TC134-14

Top Cap 1-3/4" 14 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
UNI-100-162

Uni-Size Bottom Weather Seal 16'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
.295-334-L

Cut-to-Length Torsion Spring .295 x 3-3/4" Left Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
1104-ASFT-7FT

Elton Aluminum Stiffener for 1104 7ft

  • Prevents the 1104 from buckling in the hot sun
68-9E

Wheel Chock 68-9E Pyramid Rubber with Eye Hook

  • Handles for chain fastening
  • Long Lasting 80 Durometer rubber
  • Size: 8" wide x 9" long x 6" high
MV-00024

Micanan 4-Door O/C/S Transmitter CT-4 313 MHz ** Discontinued

Programming Instructions
HSC-1000

Hand Swager 1/4" & 5/16"

  • Swages 1/4" and 5/16"
  • Made in Japan
OVERLOAD019

Manaras Telemecanique Overload Base

111883.0001

Overhead Logic Board for RMX

  • Replacement circuit board kit for the Overhead Door RMX commercial operator.
  • Replacement circuit board for the Overhead Door RMX commercial operator. UL 325 2010 compliant.
  • This circuit board replaces part #110955.0001
26-40039

Truck Door Offset U-Channel Seal Retainer 98" Long for Whiting DryFreight Doors *** Obsolete

  • Aluminum extrusion construction.
  • Retainer is offset to allow header clearence with seal when door is in open position.
  • For use with offset bottom seal #26-40045
MO00001

Micanan Cam Plate Compression Spring (.178 ID)

  • 2 required per operator
  • .178 ID x 032G x 55L)
MA117

LiftMaster Counterweight for Arms 15ft & Up

10-1000-14FT

Strip Curtain 14' x 48" Angle Mount - 8" LT PVC - 4" O.L Clear

  • 14 ft wide x 48" high
  • Mounting bar sold separately
2235.296-CUT

Whiting Coldsaver Bottom Panel 14-1/2" x 94-3/4" with lock Topcoat Long Pull Strap & SS package

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
  • Includes Lock and keeper
97-75005

DOT-C2 Reflective Tape 150 ft x 2" W All White

  • DOT-C2 certified exceeds NHTSA requirements
  • Highly reflective even up to a 90 degree angle
  • Quick and easy to apply
PEDALU42-HOOD

Aluminum Hood Only No Post for PEDALU42

  • Hood only No post
  • High quality aluminum
  • Boitier pied estau seulement en aluminum
Shop drawing
30B530

LiftMaster Capacitor 56uF 220V ** discontinued

  • Same as LiftMaster # 30B620
27-48-100

Extension Spring 8' Door - 100 lbs Tan

  • Single - Loop
  • 27" long 48" stretch 100 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
H12G03-SS

Hinge #3 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
Z9967

Roller Chain Puller *** To Extent of Inventory

  • Allows chain to be pulled together for attachment of the master link
  • For 35 thru 60 chain
MP-00024

Micanan Auxiliary Chain Disconnect for Pro-T TB

  • Allows for operation of a door by an auxiliary chain hoist.
  • Hoist mechanism is coupled to front end of drawbar
  • MUST specify door width and position of hoist (left or right)
9003-15FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle Bolt On 15' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
9003-13FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle Bolt On 13' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
1224-1-3/4"-WHT

Elton Commercial Window for Flush Doors 1-3/4" thick 1224 White Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 25-1/8" x 13-1/8"
  • Cut-out size: 24-1/16" x 12"
  • Vision area: 21-11/16" x 9-5/8"
  • Different glass options and frame colours are available upon request
    • .......more details
K-LA500

LiftMaster Primary Replacement Arm Service Kit for LA500 Original Arm ** DISCONTINUED

  • Replacement arm only - no stripes old style
B119

Rolling Steel Fire Door Bottom Bar Slotted Angles Sold per Foot

271723

Rolling Steel Slide Bolts for Bottom Bar D679

14FW

Rolling Steel 3" Filler Endlock for Continuous

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
2522

Whiting Thrust Washer

  • Used on Whiting balancer assemblies
SLT4-20

Rolling Steel 3" Crowned Slat 20-ga Galvanized

348-CUT

Whiting Tongue & Groove Bottom Panel Assembly with Lock 15-1/2" Cut to Custom Size **Quote Only

  • Cut to exact size required ** customer must specify
  • Primer only
SL316COP

Copper Sleeve 3/16" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST316COP
.312-2-5/8-RH-C

Torsion Spring .312 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 2-5/8" Length: 12 ft
.273-2-RH-C

Torsion Spring .273 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .273 ID: 2" Length: 12 ft
.250-2-5/8-RH-C

Torsion Spring .250 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .250 ID: 2-5/8" Length: 12 ft
.243-1-3/4-LH-C

Torsion Spring .243 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .243 ID: 1-3/4" Length: 12 ft
.192-1-3/4-LH-C

Torsion Spring .192 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .192 ID: 1-3/4" Length: 12 ft
.192-1-3/4-RH-C

Torsion Spring .192 x 1-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .192 ID: 1-3/4" Length: 12 ft
DF090.2

Whiting Dry Freight Door 3/4" without Track or Balancer

  • Original Whiting dry freight replacement door for serial # 99164
PRO-GH-7553U-LH

Micanan 3/4HP 575V 3P Gearhead Op. N1 Eyes Monitored ECB Left Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
K1D6597-1CC

LiftMaster Control Board with Heat Sink CSL24V & CSL24VH

  • Control board for CSL24V and CSL24VH gate operators
  • 014D1058M
.187-2-L

Cut-to-Length Torsion Spring .187 x 2" Left Hand Wound

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
BK308

Jamb bracket J-08 #8 12 gauge

  • Sold by the piece
  • Height 4.00" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK301

Jamb bracket J-01 #1 12 gauge

  • Sold by the piece
  • Height 2.40" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
.319-334-L

Cut-to-Length Torsion Spring .319 x 3-3/4" Left Hand Wound Blue/Green

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-334-Installed
SOLID_SHAFT_16'

Solid Shaft 1" Keyed 16 ft Galvanized

  • Actual length is approx. 16'-1"
MGR20-Y-2U-05

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet 5ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
Installation ManualSell Sheet
SPREADER003

Chain Tensioner for 1-1/4" / 1-1/4"

  • Chain spreader for installation with 1-1/4" operator shaft and 1-1/4" door shaft
  • Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing
Installation instructions
OGH-6434-ECB

Manaras 1 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
IRB-EXP

EMX Industries Explosion Proof Through-Beam Photocells 1162-1

  • Designed to operate in areas with explosive environments.
  • NEMA 4 and 7 housing
  • NEC Class I Groups B C & D Class II Groups E F & G CSA certified CENELEC certified EExd IIC.
  • Copper free Aluminum with Epoxy finish.
  • Potentiometer range adjustment to allow more precise tuning to site.
  • Through beam design is not affected by shiny surfaces.
    • .......more details
Installation ManualSell Sheet
OTBH-6532-ECB

Manaras Trolley Operator 1/2 HP 600V 3 Ph with Electronic Circuit Board

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
Installation ManualSell Sheet