Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

510.PSKE.00

Whiting Penske Spec. Option

  • Options that are unique to the Penske fleet which include:
  • Side seals
  • Stainless steel rivets on roller hinges
  • Countersunk aluminum rivets on centre row of hinges
  • Galvanized scuff liner on inside of bottom panel
  • 12†pull strap on inside of door
  • .......more details
38C

Skylink 1-Button Universal Remote ***NLA

  • Easy to carry or clip on sun visor.
  • Operating range of 100 feet and more.
  • 12V alkaline battery included.
PRO-HB-5011U-LH

Micanan 1/2HP 115V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
  • On-Board receiver holds up to 20 transmitters
SS-1-1/4-24

Solid Shaft 1-1/4" Keyed 24 ft Zinc ** To Extent of Inventory

  • Maximum length for a solid shaft is 24ft
  • Actual length is approx. 24'-1"
MK-00605

Micanan Double Limit Switch

MA024RDOT

LiftMaster White Aluminum Arm with Retro-Reflective DOT Tape 12 ft

  • For use on Mega-Arm gate operator
  • Red White reflective DOT stripe
PRO-TB-7553-U

Micanan 3/4HP 575V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks
  • Full function Smart 10.0 logic control board featuring on-board receiver
  • #41 roller chain drive
  • Solenoid brake standard
  • External radio control strip
  • Three button O/C/S control station Nema-1 included
  • .......more details
CB53205000-KOR

Cable 5/32" 7x19 5000' Galvanized Supreme ** Price on request

  • Galvanized cable 5/32" 7x19 5000ft spool.
  • Cable break strength: 2800 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
180215

Decorative Hinge Apen-V3 Style 16" Stamped Steel Sold per piece

  • As seen on carriage house doors
OCS-PANEL

GDI Panel Buttons Open/Close/Stop N1/ N4 G3253

  • Power LED
JY-10

Devanco Solvent & Degreaser 400g

  • General purpose solvent and degreaser
  • Contains natural citrus oils. Cleans oily greasy and dirty surfaces.
  • Dries quickly and leaves no residue.
  • Approved by CFIA.
MG020-B-2E-06

Miller Edge Sensing Edge Black 2-Wire End Outlet 6ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
  • .......more details
GD-STEND-24D

End Cap Steel 18G 24" Double 1-3/4"

GD-STEND-18D

End Cap Steel 18G 18" Double 1-3/4"

GD-STEND-21D

End Cap Steel 18G 21" Double 1-3/4"

MIRM-T2

Miller Edge Patriot 2 Photo Eye Monitored 30ft Non-Contact ** NLA

  • Attaches directly to a Sectional door.
  • The photo eyes travel below the door during the closing cycle.
  • Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
  • The Patriot2 non-contact system consists of thru beam photo optics.
  • Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
  • The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.
  • .......more details
02-409

LiftMaster Key Switch 2-Position Nema 4/12

  • Two Position Key Control Station
  • Outdoor Surface Mt. (NEMA 4/12)
  • Tamperproof
  • Die cast metal enclosure with standard key cylinder
  • OPEN/CLOSE spring return to center (OFF) key removable in center position only. Should only be used on operators wired for constant pressure to open and close (all LiftMaster industrial operators with type D control wiring).
  • Dimiensions: 3" x 3.2" x 4.2"
  • .......more details
7001-16-CHARCOL

Commercial Side & Top Weather-Strip 16' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
CP-ARM-OLD

Lynx Auto Re-Connect Carriage Arms Only New Style 20-1/2" *** Discontinued

  • Arms only for CP-CRG-OLD
MOUNTSHAFT016

Manaras Clutch & Hoist Shaft Kit for Opera-SH

  • Input / clutch shaft kit for Manaras Opera-SH
IRB-RX

EMX Industries Receiver Board Only for IRB-4X *** NLA

20113R

Genie Limit Switch Screw Drive

  • For use on Genie screw-drive openers.
  • Compatible with ALL Genie Screw and Trac Drive garage door openers with standard rail assemblies
  • Replaces either the UP or the DOWN limit switch
  • Replaces Genie Genius Trac Drive limit switch models 19795S and 22785R
  • Not compatible with excelerator models
CS303-DB50

EMX Car Sense Direct Burial Sensor with 50 ft Lead Wire ** Replaced by the LRS-DB-50

  • Can be used for above ground applications ie.. strapped to a post or wall
  • Easy low cost installation
  • Small size of the detector allow for easy installation in pavement
  • Rugged sensor is also suitable for above grade installations
  • Includes direct burial sensor and 50 ft of lead wire
  • Advanced 3-axis technology for better detection
  • .......more details
CS303-FP-50

EMX Car Sense Direct Burial Sensor Flat Pack 50ft ** Replaced by LRS-FP-50

  • Lead probe ONLY. Requires the CS303-C-1 detector.
  • Easy installation above or below ground
  • Ignores cross traffic in tight spaces with DETECT-ON-STOPâ„¢ feature
  • Sensitivity display
  • Single cut installation with flat pack model
GAREX-SPEC-ORDR

Garex Light Commercial Door Special Order

  • specify size color details when ordering
  • Please call for pricing
1003-4-DF-CUT

Bottom U-Rubber 4" Dual Fin Black Sold per Foot

  • Sold in cut lengths per foot.
  • Dual fin
HBS2UD

Stainless Steel Bottom Fixture 1-5/8"-2" Door 2-3" Track Double End Stile Sold per Pair *Includes (1) Right and (1) Left Bracket (4) U-Brackets) (2) Clevis Pins (2) Cotter Pins*

  • Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
  • Laser Cut for a Clean Finish
  • For 1-5/8"-2" Doors
  • Fits 2" or 3" Track
  • Double End Stile
  • Pins and Cotters
  • .......more details
Q400E-HCT

LiftMaster Control Board HCT

  • Replaced Q400D-HCT
41A8094

LiftMaster Residential Door Arm Kit Straight and Curved Arms

  • Kit contains: Straight arm Curved arm and hardware bag
50180

Doorlec Brake Assembly 120V

FL-T50

FL-Heddolf 1-Button Dip Switch Remote FL 311MHz *** Discontinued.

  • ID220-1KA Heddolf remote
  • 9V battery & metal clip included
OMJ-6112-ECB-L

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board Left Hand

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
  • .......more details
CP-LX100

Lynx Control Board with Cover for UL325 models

  • For all voltages
R5202

Pulley 3" Zinc Plated Steel with Sheave Strap

  • Bored for 3/8" diameter bolt
  • Maximum cable diameter: 3/16"
  • Hardened inner race.
D6375-164-125

Cable Drum High Lift 164" 1-1/4" Bore Torque Force Pair

  • Maximum hi-lift: 164"
  • Capacity: 800 lbs per drum
  • Cable length: Floor to shaft center 181" minus amount of Hi-Lift
  • Cross reference: DNS 410-164 OMI 164HL M162-4165
PEDALU4272

Aluminum Pedestal Post Dual Height 42" & 72"

  • Pedestal post with hood
  • High quality aluminum
  • 42" & 72"
  • Dual face-plate allows for easy wire connections
3BXT

Control Station Exterior Surface Mount O/C/S N4 Non-Metallic

  • Double pole contacts
  • H=5-3/4" W=2-3/4" D=2-1/2"
  • UL Listed CSA Approved
7001-WG-10-MO

Residential Wood Grain Side & Top W/S Medium Oak 10' Long - Painted Screws to Match

  • Medium Oak retainer with Medium Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
  • .......more details
PRO-HBH-7511R-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft with Mechanical Contactor Left Hand (PRO HHDR)

  • 3/4 HP 115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Electro-Mechanical Control Circuit (non-circuit board model)
  • 3-btn open/stop/close (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • Emergency chain hoist with electrical cut-off for manual operation
  • .......more details
26-40410

Truck Door T-Style Standard Side Seal 116"

  • Extruded from long lasting rubber
  • Seal protects cargo area from dirt and moisture
  • Used with standard J channel vertical angle with 1" track
  • Length: 116"
  • Cross reference: T #69840 W #4019 620200
SBPFL205-16

Pillow Block Flange Bearing Football Style 1" Bore SBPFL205-16

MK00108

Micanan Telemecanique Contactor 24V for Logic Board with Contactor Interface

  • LC2K1210B7 mini contactor
MO00002

Micanan Brake Compression Spring (5/16" ID) *** Replaced by MO00034

BK022/PR

Commercial 3" Aluminum Bottom Bracket with Cable Adjustment Sold as a Pair

  • Rating: 2200 lbs max per door
  • Use with: 3" straight track
  • Aluminum bracket with zinc plated hardware
  • Sold as a pair (includes one left and one right).
37028G.S

Genie Circuit Board for Retail Model 1022 ** Repl. by 39537R.S (no cover)

  • Compatible with Genie 1022 1042 ChainLift 600 and QuietLift 600 models.
  • Purple
97-75005

DOT-C2 Reflective Tape 150 ft x 2" W All White

  • DOT-C2 certified exceeds NHTSA requirements
  • Highly reflective even up to a 90 degree angle
  • Quick and easy to apply
GH4416-08-R

Green Hinge #8 12-ga Right Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
LA400DC

LiftMaster Primary Actuator Arm for Single Gate Applications 12VDC New Version

  • New version has red stripe but will still work on the old LA400
RS10311

Roller 3" Steel 11" stem 10 ball

  • Steel Roller Wheel diameter: 3"
IG2-K10-30

Invisi-Guard-2 Photo Eye Kit 30ft Battery Powered *** Discontinued

  • The Invisi-Guard-2 thru beam photo optic system sends an invisible beam of light from a transmitting unit to a receiving unit.
  • The light beam is intended to function as a protective line guarding a potentially hazardous zone.
  • When the light beam is interrupted by an obstruction a signal is sent to the motor controls to stop or reverse motion
  • Universal Design Works with Pre and Post 2010 Operators
  • Spans Distances up to 30 feet (model dependent)
  • Time Saving Installation
  • .......more details
100MAPS

LiftMaster External Power Supply 110VAC Input 12VDC 2000mA

  • Provides enough power to operate two LC-36A light curtains.
  • Includes 38' cable leads
27-48-170

Extension Spring 8' Door - 170 lbs Orange

  • Single - Loop
  • 27" long 48" stretch 170 lb load
  • Sold individually
  • Rated for 10000 cycles
H12G05-SS

Hinge #5 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
41ASWG-0119

LiftMaster Release Keys for LA400 & LA500 Qty: 2

K20-1100C-2TLP

LiftMaster Electric Motor 1 HP 115/230V 1Ph TEFC Logic

E041

Rolling Steel Bottom Bar Astragal 679 Sold per Foot

14-J

Rolling Steel 3" Flat Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
7097

Whiting Cable Drum Assembly for 2-5/8" ID Spring Wire Roadside (LH)

  • A Whiting original
  • Cable drum and bearing
SLT4-20

Rolling Steel 3" Crowned Slat 20-ga Galvanized

.343-6-RH-C

Torsion Spring .343 x 6" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .343 ID: 6" Length: 12 ft
.312-5-1/4-LH-C

Torsion Spring .312 x 5-1/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 5-1/4" Length: 12 ft
.234-2-5/8-LH-C

Torsion Spring .234 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .234 ID: 2-5/8" Length: 12 ft
BK101/PR

Spring Anchor Bracket USA 8-Gauge sold as a pair

  • Universal spring anchor brackets - Residential/Commercial
  • Centerline adjustment: 3-5/16" to 6-3/4"
  • Bright zinc plated 8 gauge steel
  • No bearing
  • Bearing R5110 sold separately
RN0029-SS

Roller 2" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 50000 cycles
Q223

LiftMaster Control Board Master / Second (K001A5869) *** Discontinued

  • Replacement control board for the Miracle-One gate operator with two arms - Master / Slave.
  • Same as part no. K001A5869
MB-02001

Micanan Electric Motor Only 3/4HP 110/220V 1PH

  • Base Mount motor O.D.P. FR56
  • Used on Micanan's T TB APT J EJ H EHJ HHD & SD
2200-030

Linear Limit Nut

  • Used on various Linear Gate operators
8002-7FT

Side Weatherstrip with Black Rubber Bulb for Pedestrian Door 7ft Long

  • Aluminum and Black Rubber
  • Comes in 7ft lengths
MODKIT074

Manaras Hand Crank Field Modification Kit

  • For in-field upgrade on OGH and MGH operators
MG020-Y-2E-04

Miller Edge Sensing Edge Yellow 2-Wire End Outlet 4ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
  • .......more details
CARRIAGE006

Manaras Trolley Carriage Aluminum Die Cast

OTBH-6114-1-ECB

Manaras Trolley Operator 1 HP 120V 1 Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
T103L5

LiftMaster 1 HP 208/230/460V 3P Commercial Trolley Operator Logic 5

  • Trolley low profile with brake
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0â„¢ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
16-5L300

LiftMaster Cogged Vbelt 5L 30"

CLUTCHPAD008

Manaras Clutch Pad 1" ID 4" OD

  • Replaces CLUTCHPAD002
VBELT_4L355

Doorlec VBelt 4L 35.5" *** NLA

  • Same as part number 19045
27220A

Genie Limit Switch Chain Drive

  • Compatible with the following operators: PMX700 GPS700-IC PMX1200 GPS1200-IC PMLD500 PMX500-IC/B PMX300-IC/B IC250/B PMX60-65-70-75-80-85-300IC-500IC-IC250 among others
  • For chain drive models with internal limits
34516R

Genie Chain Glide Inner Slide ML Series with Magnet

  • For ML Series with Magnet: 350ML 500ML 700ML 800ML
6062

Programmable Timer *** To Extent of Inventory

  • 12VDC or 24VDC operation is selectable
  • Functions include: One shot Delayed release Delayed operate Delayed pulse and Pulse / Flasher.
  • Momentary relay activation at the end of a desired timing cycle eliminating the need for having to use 2 timers to achieve this function
  • LED indicates relay is energized
  • Form C relay contacts are 8 amp at 120VAC / 28VDC
37408

Doorlec Reversing Contactor BF9 120VAC

MD00017

Micanan Drive Sprocket 50B23 x 1" Bore 1/4" KW

MK-00719

Micanan Replacement Antenna for On-Board & External Receiver

  • Approx. 8" long
774

Fasteners Hex Head Bolt 5/16-18 x 3/4" 1000/Box

  • 5/16" bolt has 1/2" head
  • Max torque = 12
  • Full thread
  • Grade 2/Grade 5 depending on availability
776

Fasteners Hex Head Bolt 1/4-20 x 1" 1000/Box

  • 1/4" bolt has 7/16" head
  • Max torque = 6
  • Full thread
  • Grade 5
SSZP8-6

Solid Shaft 1" Keyed Zinc Plated 8'-6" (102")

MT22-BLACK-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

  • €¢Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
CH751L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 115/230 VAC Logic 5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with either CPS-UN4 or CPS-RPEN4 photoeyes
K001C8103-1

LiftMaster L5 Antenna

26-14623

Truck Door Top Panel (13" x 98") for Todco DryFreight

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • .75" thick 7 ply exterior grade medium density plywood
  • Primer finish
DT-312

Linear 1-btn Delta3 Transmitter 312 MHz *No Longer Available*

  • Activates one Delta-3 receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 (set by dip switches)
  • RF frequency: 312 MHz
  • .......more details
T014

Manaras Trolley Track 14ft for 1/2HP models up-charge *Actual length 198"*

  • For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)
111854.0002

Overhead Logic Board for RSX 3/4 & 1 HP 1PH

  • Description: KITPCB1PH3/4-1HPSX/HXUL10
  • For RSX ad RHX models 3/4 & 1 Hp Single phase operators
CPS-RN4

LiftMaster Retro-Reflective Commercial Protector System with Nema 4 Enclosure ** DISCONTINUED

  • Utilizes a sending/receiving retro-reflective photo-eye and a specially designed polarized reflector that increases obstruction detection reliability
  • Polarized photo-eye design for a safe retro-reflective photo-eye system
  • Designed as a normal open circuit but not a self-monitoring system (does not incorporate industrial code technology)
  • Range up to 30 ft - indoor use only
  • 24VAC operation
  • Color: Yellow
  • .......more details
21-10298

Transformer 100VA

  • Multitap Transformer 120/208/277/575V Primary 24V Secondary 100VA 50/60 Hz
  • Fused at 5A
GITR-3

Genie Intellicode 3-Button Remote 37517S 390 MHz *** To extent of Inventory

  • Replaces Series II GIT-1 GIT-2 & GIT-3
  • Battery Instructions Visor Clip Included
  • Note: Only the far right of the three buttons (1 dot button) will operate those older Genie Intellicode units built from 1995 through 1997.
  • If you have a Genie unit built in 1995 1996 or 1997 this is the only remote that Genie presently makes to operate the Genie garage door openers built during these years.
  • In this special case the remotes can only be used as 1 button remotes and no other multi-button Genie remote is compatible.
BK000

Residential Top Bracket Adjustable 1-Bolt Sold per Piece

  • Same as part number 3-31-1
  • Sold per piece - not a pair
STATION081

Manaras Push Button Control Station 1-Button Nema 4/12

  • 1-button 1 N/O contact
  • Plastic
655302

LiftMaster Pneumatic 22' Sensing Edge with 2-Wire Take-Up Reel

MH00099

Micanan Bearing

  • Fits PRO-APT and PRO-HHD
  • Requires 2 per shaft
  • 3/4" Bore
.295-2-L

Cut-to-Length Torsion Spring .295 x 2" Left Hand Wound Blue

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED