Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
RADIO-EM102

Manaras Mini 3-btn Rolling Code transmitter 390 MHz

  • Field Configurable
  • Hand Held or Keychain three button
  • Rolling Code Technology
  • 1 Door (SD) Open/Close/Stop or Multiple Doors (MD) 1-3 single-button field selectable
  • Config. Trad. Comm. Sesquence or Alternating Sequence (SBC) Open/Close/Stop (with ECB)
  • Nema 1
    • .......more details
Manual
7549

Whiting Winding Cone for 2-5/8" ID Spring Wire Curbside (RH)

  • A Whiting original
1015-1-3/4-8'

Rigid Vinyl Bottom Retainer Raised Centre 8' Long

  • Black - for door thickness of 1-3/4"
91-00401

Truck Door Step Bolt 1/4"-20 x 1.50" (3/4" head)

  • Zinc plated finish
  • Cross Reference: T #80015-1610
OSH-6214-ECB

Manaras Opera-SH 1 HP 240V 1 Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
111883.0001

Overhead Logic Board for RMX

  • Replacement circuit board kit for the Overhead Door RMX commercial operator.
  • Replacement circuit board for the Overhead Door RMX commercial operator. UL 325 2010 compliant.
  • This circuit board replaces part #110955.0001
110001-BULB-PER-FT

Janus T-Bulb Astragal Black Sold per Foot

  • Fits Janus mini storage doors M650
  • Bottom weather seal only no retainer
MT22-MON-GRY-RH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Gray Sold per Foot

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
SESMT03

Erone Wall Support for Transmitter

  • Wall support for one S2TR2641 transmitter
  • Color: Grey
  • Velcro and mounting hardware included
Wireless System Chart
RL44-40

Direct Burial Loop 6' x 16' Loop with 40' Lead-In

  • Used for installations under concrete asphalt pavers or in gravel roads.
  • The loop can be tied directly to the rebar before concrete is poured.
  • Wire is designed for a direct burial application.
1102-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
.283_2-5/8"-LH

Torsion Spring .283 x 2-5/8" x 12ft LH White

  • Wire size: .283
  • Inside diameter: 2-5/8"
  • Length: 12 ft
H501L5-LH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 115/230 VAC Logic 5 Left Hand *** No Longer Available

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
CBA18B08

Cable Assembly 1/8" 7x19 114" Sold per Pair

  • Galvanized cable assembly for 8ft door (114" = 9'-6")
  • Aircraft cable made of 19 wires per strand and 7 strands per cable
  • Sold as a pair
  • Same as part number 458
BK307

Jamb bracket J-07 #7 12 gauge

  • Sold by the piece
  • Height 3.75" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
TRACK-GUARD-36

Track Guard 36" Tall Safety Yellow With Base Sold as a Pair

  • Provides impact protection to vertical track
  • 45° angle flange adds strength protects from side impact.
  • 7-gauge steel construction powder coated safety yellow for high visibility.
  • 1/4” foot plate drilled with slotted holes for three 1/2” anchors.
  • Wall flange drilled with slotted holes for four 3/8” anchors
  • Includes: 60-5092 (right) and 60-5093 (left) sides
    • .......more details
2524

Whiting Balancer Bracket End - Roadside for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Cross Reference: W #2524 for #2376 balancer
K001D8075-1

LiftMaster Logic Board - L5 ** USE K001D8395

  • 14D1279E
Programming InstructionsInstructions de programmation
112631.0001.S

Overhead/Genie Logic Board

CGH101L5-RH

LiftMaster Gearhead w/ Brake & Carwash Mod. 1 HP 115/230V 1P L5 - Right Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting except when a MOD is added
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
2376.177*34.960

Whiting Torsion assembly .177 wire size 34" spring length 96" shaft

CDJH-12-115-UL

Lynx CDJH HD Jackshaft hoist commercial operator 1/2 HP 115V with ECB UL325

  • New LX100 circuit board.
  • Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
  • 4L V-belt primary reduction #41 drive chain and sprockets.
  • Adjustable friction clutch Inherent Mechanical Brake included
  • Fully driven adjustable limit switches.
  • Heavy duty 3 button wall station (Open Close Stop).
    • .......more details
93519.5260

Todco Side Seal 80" long Lip ** Special Order Quote Only

  • Special Order item. Must be quoted each time
  • Fits Fleetstar Door
5001-7-CREAM

Residential Side & Top Weather-Strip 7' Long - Cream

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
2200-215

Linear Precision Bearing 5/8"

5423.105

Whiting Side Seal 105" 5/16" Track Spacing

  • Quote required prior to sale to ensure correct fit
K41-0095-000

LiftMaster DC Motor Drive HD Gate

  • This service kit is compatible with the following models: HDSL24UL & HDSW24UL
DC300-CABLE-P/FT

Dyna-Hoist 5-Conductor Cable Sold per Foot Increments of 5ft- Max 25ft

  • Sold in increments of 5ft to a max of 25ft
10TD900HH1

BEA 1-Button Transmitter 900 MHz

  • Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
  • It also provides better penetration of obstacles.
  • Operating temperature: -10 to 55C
  • IP65
017-034

Blue Giant Spring Wire T/L85 Spring **Special Order

  • Price by Quote Only
MOD151

Manaras 1-1/4" Output Reducer OGH 1/2 to 1HP

  • Add-on to a OGH operator
CP-SP-ARM-REL

Lynx Barlock Spring

PRO-HBH-7521U-L

Micanan 3/4HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

  • 3/4 HP230V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
7176.218*29.091

Whiting Heavy Duty Torsion Assembly .218 x 29" shaft 91"

OSHW-6112-M-N4-L

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
    • .......more details
15-80B60YMP

Sprocket 80B60T 2.0B 2X 1/2-13"

  • Also known as: 158060
TS-1-255-GALV-KEY

Tube Shaft 1" x 255 (21'.25) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
TS-1-207-GALV-KEY

Tube Shaft 1" x 207 (17'.25) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
TS-1-168-GALV-KEY

Tube Shaft 1" x 168 (14'.0) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
15-50B72LGH

Sprocket 72 Teeth 1" Bore 1/4" Keyway w/SS

  • Same as 71-1550b72LGH
RDRG63.3.1-1:1/2

Maximum Output Torque Generated Chain Hoist Rolling Door w/4B60HD-1:1/2K3/8-2S5/16SQ ** Spec Order

31114

Doorlec Sprocket 410B09 5/8" Bore 3/16" Keyway

  • 9 tooth sprocket
SHSS-38-1

Set Screw Square Head 3/8" x 1"

  • Natural black
  • 16 threads per inch
KW011

Keystock 3/16 x 1"

  • Sold per piece
HTUS-DOUBLE

Stainless Steel Garage Door Top Roller Bracket 12-Gauge Double Slot

  • Manufactured with 12ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Adjustable from 2"-3-1/2"
  • Double Slot
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
    • .......more details
H11G07-SS

Hinge #7 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H11G02-SS

Hinge #2 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
K41-0243-000

LiftMaster Output Sprocket IHSL24UL

  • Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators
5001-8-CREAM

Residential Side & Top Weather-Strip 8' Long - Cream

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
IP-MDSF

CDVI Point of Entry Exterior Multi-Tenant Flush Mount Video Intercom System

  • Intercom system designed for multi-tenant residential and commercial properties providing video entry via IP with a free to download smartphone app.
  • Ideal for outdoor use on apartment buildings (up to 500 tenants) or commercial properties.
  • Features a 170 degree fisheye camera 5" touchscreen menu and integral dual technology card reader.
  • IP54 (recommended to be put under a canopy or covering)
  • Operating temperature: -10C to 50C
  • Stainless steel panel
    • .......more details
OPJ-6233-M-N1

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
K41-0372-999

LiftMaster Drive Sprocket Chain Repair Kit

  • Repair Kit to correct quality issue with TDC1200 & 2200 Maxum trolley openers
  • MAXUM CDO SKUs affected TDC7S1BMC TDC7S4BMC TDC12S1BMC TDC12S4BMC TDC12X1BMC TDC12X4BMC
GALV-306-334-R

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Galvanized Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
GALV-283-334-L

Cut-to-Length Torsion Spring .283 x 3-3/4" Left Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
99119671-PER-FOOT

Amarr Bottom U-Seal 3.5" Black Double Dovetail Vinyl 1/4" T Sold per Foot

  • 1/4" T width
  • Used on Amarr Residential Open Back Doors and Classica models
2807.177*290

Whiting Spring Assby .177 x 2-3/16 x 29" Curbside

  • Replacement torsion spring with cones
  • Specs: .177 x 2-3/16" x 29" Long
  • For Roadside order part # 2806.177.290
GALV-343-334-R

Cut-to-Length Torsion Spring .343 x 3-3/4" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
K41-0409-000

LiftMaster 1200 Extended Duty Motor Gear Box Encoder Trolley

  • For Maxum Trolley 1200 Op
K41-0375-000

LiftMaster 24VDC Motor Gear Box Encoder (Jackshaft 1200)

  • Maxum J-1200
MI00034

Micanan Pulley 9" OD c/w Bushing 3/4" ID

19-40ML-SS

Master Link #40 Stainless Steel

  • For #40 chain
GX-200-MG

Garex Ready to Install Door Multi-Grooved Special Order

  • 21" panel = 4 grooves 24" panel= 5 grooves
  • COMPLETE JOINT SEAL No air circulation between the panel sections eliminating thermal bridges.
  • Minimize the heat transfer between the inside and outside of your garage.
  • LIGHTWEIGHT AND ROBUST PANEL Polyurethane foam insulation pressure injected between the interior/exterior faces
  • WOOD END BLOCKS Suitable to receive steel end caps
  • HIGH-PERFORMANCE DESIGN Flexible rubber inserted into a PVC reinforced moulding offering a tightly sealed fit to the floor
    • .......more details
SCREW002

Manaras 1/4"-28 x 1/4" Set Screw

GALV-406-6-L

Cut-to-Length Torsion Spring .406 x 6" Left Hand Wound Galvanized Blue/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized
GALV-406-6-144-L

Torsion Spring .406 x 6" x 12ft LH Galvanized Blue/Yellow

  • Wire size: .406
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
2807.206.380

Whiting .206 x 2-3/16 x 38" Curbside with Cones

LJH-353-1/2

Doorlec 1/2 HP 575V 3PH Jackshaft Operator

  • Heavy duty industrial type control station open close stop 24V. control circuit
  • Universal mounting right or left
  • Floor level disconnect device electrical and mechanical
  • Emergency chain hoist operation on LJH model only
  • Colour code wiring diagrams
  • Rotary type limit switches readily adjustable in both directions
    • .......more details
RGH-6214-MON-RH

Manaras 1 HP 240V 1Ph Rapido Gear Head Op. Monitored ECB Right Hand

  • Rapido version of model OGH
  • Includes PHOTO-061 Monitored N4X Thru-Beam eyes
E/0172/166

Automatic Systems Spring Assembly

MOD050N2

Manaras Friction Clutch Mod. #50 Chain 1-1/4 RGH

  • Installed directly on the output shaft of the operator.
  • Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
  • Includes sprocket for #50 chain
  • Operator mounting side must be specified
  • A spreader bar cannot be used in conjunction with this modification
  • This modification applies to RGH ops
    • .......more details
20W33A

LiftMaster Solar Kit 33-AH 12V ***Kit includes: 1x SP20W12V 1x A12330SGLPK & 1x K94-37236***

  • Kit includes: SP20W12V (1) SOLAR-PANEL KIT12V20W A12330SGLPK (1) BATTERY 12V33AHSINGLE K94-37236 (1) UNIVERSAL SOLAR HARNESS KIT-7AH & 33AH
  • Compatible with: RSL12ULMC gate opener
44-60-160

Extension Spring 10' Door - 160 lbs

  • Clipped ends
  • 44" long 60" stretch 160 lb load
OTBH-6534-M-N1

Manaras Trolley Operator 1 HP 600V 3 Ph Monitored w/N1 Photoeyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
OSH-6114-M-N1-LH

Manaras Opera-SH 1 HP 120V 1 Ph Monitored w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
E/1929/201

Automatic Systems Limit Switch Assembly

  • Used on the BL229 gate op.
OSH-6114-M-N1-RH

Manaras Opera-SH 1 HP 120V 1 Ph Monitored w/N1 Eyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
MWTA12B

Miller Edge Transmitter with Low Battery Alarm Small

  • The transmitter comes standard with a NEMA 4 weather-proof enclosure
  • Compact design that allow for easy troubleshooting.
  • The transmitter has an audible alarm that activates when the battery has 25% of its life remaining
  • Easy to configure · Non-monitored system ideal for operators manufactured prior to: · Doors: August 2010 · Gates: January 2016 · NEMA 4 transmitter built to endure rugged environments
  • Power Source: (2) 1.5 volts AA lithium batteries
  • Input: 2-wire N.O. sensing edge
    • .......more details
Installation manualSpec sheet
LPEXP

LiftMaster CAPXL Loop Detector Input Board

  • Automatically trigger a phone call to a guard or office when a guest arrives
  • Mounts inside of CAPXL
  • Works with CAPXL and LOOPDETLM Plug In Loop Detector (Each sold separately.)
  • Operating Temperature -20°F to 130°F (-29°C to 54°C)
  • Dimensions: 2.8” x 2.3”
OGH-6536-M-N1-RH

Manaras 2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
MA035RDOT

LiftMaster 9ft Square PVC Barrier Arm Only (Articulating Hardware NOT included)

  • 9' Square Arm
  • PVC
  • Red & White Retro-Reflectorized DOT Tape
  • Hardware NOT included
XF600VAC7

LiftMaster 600V Transformer Kit 700

  • For use with various LiftMaster® MAXUM Series DC 700 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators
SB258100-PAIR

Garex End Bearing Plate Reinforced 2-5/8" - 1" Residential Sold as a Pair

P-9931R

Pulsar 1-Channel Receiver 318 MHz

  • Allstar compatible
  • Single channel receiver
  • 24V AC/DC
  • 8 dipswitches 318 MHz
PRO-EJ-5011-U

Micanan 1/2HP 115V 1P internal lock sensor Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
IRB-MON2

EMX Industries Universal Thru-Beam Photocells UL325 Built in Hoods

  • Kit includes transmitter receiver integrated protective hoods and removable lens sunshield
  • Thru beam configuration
  • UL325 compliant
  • Four (4) monitoring interfaces
  • 115 ft. operating range
  • Easy installation and set-up
    • .......more details
ManualSell Sheet
400-CBAC-STD-115V

FAAC Standard Gate Arm w/Positive Stops 40-1/2" L *** Price by Quote Only

  • 400 CBAC Standard (Short) Arm with positive stops 40-1/2" tip-to-tip
  • Replacement arm for hydraulic Swing Gate Operator 10420112.5
  • This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system
  • Dimensions: 40.5 x 3.35 x 3.35
GALV-343-334-144-R

Torsion Spring .343 x 3-3/4" x 12ft RH Galvanized Blue/Red

  • Wire size: .343
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-319-258-144-R

Torsion Spring .319 x 2-5/8" x 12ft RH Galvanized Blue/Green

  • Wire size: .319
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-273-334-144-R

Torsion Spring .273 x 3-3/4" x 12ft RH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
OMJ-6112-M-N1-LH

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Monitored Circuit Board N1 Eyes Left Hand

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
MGH-6536-M-N1-RH

Manaras 2 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
BEA-10LIGHT-TBASE

BEA Modular LED Signal Base

  • To be used with the BEA-10LIGHT modules.
User GuideDatasheet
BEA-10LIGHT-TR

BEA Modular LED Signal Light Segment Red

  • Signal lights for industrial and vehicle flow management applications.
  • LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
  • These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
  • Operating temperature: -40 to 122F
  • Nema 4/IP65
  • Base sold separately
    • .......more details
User GuideDatasheet
2200-207

Linear Double Pulley 2" 5/8" Bore HSLG

V3564-PER-FOOT

Vinyl Seal 4" Bottom Bead End Grey Sold per Foot

  • Bead diameter 3/16" - 7/32" +/- tolerance
0-205679

Linear Proxpad Plus Integrated Prox Reader and Controller w/Keypad

  • Prox.pad™ plus is a fully integrated PC managed single door access system with a stand alone proximity reader and keypad.
  • The prox.pad plus when used on it’s own provides standard access control functionality with the use of it’s two relays and two inputs for request to exit and door position and enhanced system functionality when used with Hub Manager® Professional software.
  • The software allows the management of people and doors through easy to create reports and step by step wizard assisted expanded feature functionality.
  • The software can communicate to the prox.pad plus either through a 485 connection or on a LAN/WAN using the SEG-1 TCP/IP communication device.
  • By utilizing the proximity reader and keypad together a higher level of security is achieved by requiring both to grant access.
  • The prox.pad plus can be directly mounted to a single gang electrical box or to most flat surfaces.
    • .......more details
2200-817

Linear Belleville Washer

DC2000

LiftMaster Controller DC2000

  • DC2000 Controller with battery backup
  • BackUp Commercial Vehicular Gate Operator
  • 12VDC - 30 Amps Max.
  • 125 lbs. Max. pull @ CSW-200 Units
  • 105 lbs. Max. pull @ SL-3000 Units
GH755L5-LH

LiftMaster Gearhead with Brake 3/4HP 575V 3P L5 Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
P-8833T-OCS

Pulsar 3-btn 1-Door O/C/S Transmitter 109372-Compatible 318 MHz

  • Open/Close/Stop remote for 1 door
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details