Devanco Canada - Get The Right Garage Door Opener‎ and Parts

2100-1661

Linear Plate Torque Limiter VS/GSLG-A

2100-1650

Linear Plate with Solid Pin V Groove

768-500

Fasteners Lag Screw Full Thread Hex Regular Profile 5/16" x 3" 500/Pail

7/16" head
Hex Washer Regular Profile Head

ME120-Y-4E-P/FT

Miller Edge Sensing Edge Yellow 4-Wire Monitored End Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

OMT-6112-MON-N1

Manaras Medium-Duty Trolley Operator 1/2 HP 120V with Elect. Circuit Board Monitored N1 Eyes

Designed for use on smaller and low-cycling industrial standard lift sectional doors.
It features a high starting torque intermittent-duty industrial type motor and a quick release disconnect arm.
Equipped with the new Electronic Control Board (BOARD 070) with N1 photoeyes
Maximum Door Height: 14' (4260 mm)
Back Room: door height + 3'11" (1175 mm)
Head Room For Tracks: 5" (127 mm) above the highest point of door travel

.......more details

9003-200-11-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 11' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

9003-200-17-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 17' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

19-50106MN

Chain # 50x106 (5-1/2') with Master Link Nickel Plated

Also known as: K19-50106MN 199023NP
Complete kit includes: #50x106 Chain master link and clip.

OPH-6533-M-N1-RH

Manaras Opera-H 3/4HP 600V 3Ph with Monitored ECB and N1 Photoeyes RH

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

26116

Doorlec Cam Retainer Plate Waterproof

2BXT

Exterior 2-btn O/C Nema-4 Pushbutton Control Station Non-Metallic

Surface mount
Non-Metallic
Open / Close

PHOTO-073

Manaras Non-Monitored Intrinsically Safe Retro-Reflective Photocell 30' Range incl. 3" Reflector

Retro-Reflective photo cell

GHX-6114-M-RH

Manaras Explosion Proof Gear Head 1 HP 120V Monitored Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station

14-1008

PVC Roll 12" x .120" Standard Smooth 200' for Replacement Strip Curtain

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

2100-1750

Linear Key Brake Disc 1/4 x 3/16 x 1-1/4

GALV-312-334-144-L

Torsion Spring .312 x 3-3/4" x 12ft LH Galvanized Yellow

Wire size: .312
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-375-6-R

Cut-to-Length Torsion Spring .375 x 6" Right Hand Wound Galvanized Yellow/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

GALV-375-6-144-LH

Torsion Spring .375 x 6" x 12ft LH Galvanized Yellow/Green

Wire size: .375
Inside diameter: 6"
Length: 12 ft
Galvanized

15265

Whiting Rear Frame Conversion - 7" Header 2.5" Posts

An add-on option only. Price by Quote

GALV-225-258-L

Cut-to-Length Torsion Spring .225 x 2-5/8" LHW Galvanized Orange/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-225-258-R

Cut-to-Length Torsion Spring .225 x 2-5/8" RHW Galvanized Orange/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

400BL

4" Light Brush Insert 6ft Long

Polypropylene bristles

GALV-273-258-144-R

Torsion Spring .273 x 2-5/8" x 12ft RH Galvanized Orange/Red

Wire size: .273
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-295-334-144-R

Torsion Spring .295 x 3-3/4" x 12ft RH Galvanized Blue

Wire size: .295
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-243-2-144-R

Torsion Spring .243 x 2" x 12ft RH Galvanized White/Yellow

Wire size: .243
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-363-6-R

Cut-to-Length Torsion Spring .363 x 6" Right Hand Wound Galvanized Green/White Price per Inch

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

GALV-363-334-R

Cut-to-Length Torsion Spring .363 x 3-3/4" Right Hand Wound Galvanized Green/White Price per Inch

Priced per inch - cones sold separately
For factory installed cones use part no. C-375-INSTALLED

GALV-262-258-R

Cut-to-Length Torsion Spring .262 x 2-5/8" Right Hand Wound Galvanized Red/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-262-2-L

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Galvanized Red/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-207-2-R

Cut-to-Length Torsion Spring .207 x 2" Right Hand Wound Galvanized Brown Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-234-2-LH

Cut-to-Length Torsion Spring .234 x 2" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

1326-134-BLK-PLEXI

Elton Commercial Window 1-3/4" thick 1326 Black Frame Sealed Plexi Glass

Screw together window kit
Frame size: 26-1/8" x 13-9/16" (Tip to Tip)
Cut-out size: 25-1/16" x 12-9/16"
Vision area: 23-7/16" x 10-13/16" Corner Cut 4" Radius
Different glass options and frame colours are available upon request

41D9018

LiftMaster Cover Only for 8155W 8164W 8165W

For use with various LiftMaster® WiFi Chain Drive Garage Door Openers

MGR20-B-2U-M-P/FT

Miller Edge Sensing Edge Round Black 2-Wire Universal Outlet Monitored Sold Per Foot

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty •Monitored edge - pls specify the operator edge is connecting to •Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)

OHJ-6113-M-N1-RH

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 120V 1 Ph Monitored ECB w/N1 Photoeyes RH

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

AW14K500-18-RF

Miller Edge Air Wave Edge System Trans/Recvr 18ft Non-Monitored

AW14-RF MRF-01 RAH-500 (18') P50 P-50H 218-27-18
AW14-RF-K10 end plug connector plug 1/2”-18 ft. hose

GAREX-PAINT-R12-WHTE

Garex Touch-Up Paint White for R12

OSH-6213-M-N1-RH

Manaras Opera-SH 3/4 HP 240V 1 Ph Monitored ECB w/N1 Photoeyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

2704.148_140

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 14" Long

Most common torsion spring for cube trucks
Specs: .148 x 2-3/16" x 14" Long
For Curbside order part # 2705.148*140

SC-25X15-78-W

Thermal Window 25" x 15" for 7/8" thick Steel Craft Door White

For 7/8" thick door

GHW-311-1HP-RH

Doorlec Ind. Duty Jackshaft Carwash Op. 1 HP 115V 1P with ECB

With DC2000 logic board
Worm-Gear Jackshaft type Industrial operator NEMA 4/12

BEA-10-MINI-BRKT

BEA Mini Industrial Bracket Adjustable 6-12 "

Adjustable from 6 - 12 inches (up to 4" maybe cut off for shorter applications)
12" x 2.5" Mounting Face
Fasteners NOT Included
Carbon Steel Black Powder Coated

Installation Guide

BCSI-HV-CONT-BLOC

Pivin Drapeau Contactor Block BCSI ** Price by Quote Only

50690-2

Doorlec Clutch Assembly for ETBH w/Double V-Belt

K74-13839

LiftMaster Wiring Harness Kit

For use with various LiftMaster® Commercial Door Operators

1031-100

Whiting 2" Vertical Track 100" L

MINI-218-3-10-RH-W

Mini Storage Spring .218 x 3" x 10" RH Wagner End ***Price on Request

Special Order. Price valid on in stock springs only

BUSHING025

Manaras Bronze Bushing 5/8 x 3/4 x 5/16

BCT751L5CS

LiftMaster 3/4HP 115/230 Volt 1Ph Com. Trolley Operator w/ Brake Carwash and Roller Bearing Mods

New Logic 5
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.

.......more details

CP-SH-34-16-1212

Lynx Complete Clutch Shaft Assembly for CDJH

3/4" -16 x 12.50"

BOARD070MRSH12R

Manaras Replacement Control Board (Monitoring) RSH/RMSJ/RTBH 120V

On-board 390MHz radio receiver accepts 50 remote controls

CB14B0250-KOR

Cable 1/4" 7x19 250' Galvanized Supreme

Galvanized Cable 1/4" 7x19 500ft spool.
Cable break strength: 2000 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

CAP-390-468

Capacitor 390-468 MFD 3/4HP *** To Extent of Inventory

Same as CP-CAP-COM-450-540
Motor start capacitor

C12B

Felco C12B Cable Cutter Bench Mounted 3/8" Capacity* Special-Order Item Sold by Quote Only

** Capacity of 3/8 inch diameter or smaller on stainless steel cable.
The unique triangular jaws never leave a frayed end.
The C12B bench-mounted wire rope cutter mounts easily to your workbench and can be single hand-operated
Length: 19 inches
Weight: 3 lbs.

2806.171.250

Whiting Spring Assby .171 x 2-3/16 x 25" L Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 25" Long
Roadside
For Curbside order part # 2807.171.250

2807.171.250

Whiting Spring Assby .171 x 2-3/16 x 25" L Curbside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 25" Long
For Roadside order part # 2806.171.250

2807.162.220

Whiting .162 x 2-3/16 x 22" Curbside with Cones

GDI-LG930

GDI Jackshaft & Trolley JDMG-LG-2030 Nema 1 Non Monitored

Low Headroom at 4-3/4" (Trolley)
Dimensions: 11.35" x 4.3" x 4.3"
Motor type: Brushless DC
Max cyles: Open/Cose per day = 3200
One operator can handle all AC voltages - Single phase and three phase
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain

.......more details

GDI-LG920

GDI Jackshaft & Trolley JDMG-LG-A830 Nema 4 UL325 Photo Eyes Extra

Low Headroom at 4-3/4" (Trolley)
Dimensions: 11.35" x 4.3" x 4.3"
Motor type: Brushless DC
Max cyles: Open/Cose per day = 3200
One operator can handle all AC voltages - Single phase and three phase
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain

.......more details

OSH-6233-M-N1-LH

Manaras Opera-SH 3/4 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

OPH-6113-M-N1-LH

Manaras Opera-H 3/4HP 120V 1Ph Monitored Board w/N1 Eyes LH

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

80352.4200

Todco Nut Hex 1/4"-20 PLTD

LEVER001

Manaras Hoist Disconnect Lever

MGH 3-phase up to 1.5hp

P-8866TC-OCS

Pulsar 6-Door O/C/S Transmitter 318 MHz

Allstar compatible
OPEN-CLOSE-STOP 6 doors
8 dipswitches 318 MHz

Programming instructions

PRO-4X_MOD-1PH

Micanan Nema 4X Modification 1/2HP- 1.5HP 1-Phase

This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
For options M & U Micanan N-4X photocells are supplied
1/2HP to 1.5HP Motors

111854.0005

Overhead Logic Board 575V 3Ph RSX/RHX

For RSX/RHX commercial ops. 575V

K94-37695

LiftMaster Electric Motor 1/2HP

Replacement motor for SL585503U

20.5359

BEA Harness IXIO with Relay 30ft

BCS-PM26

Pivin Drapeau disconnect spacer BCSI Gate Operator ** Price by Quote Only

586-1072

Serco 3/4" dia x 2-1/8" Grooved Pin ** Price by Quote Only

For Serco loading docks

333-042

Serco Spring (Latch Bar) ** Price by Quote Only

For Serco loading docks

MB-05506

Micanan Electric Motor Only 3/4 HP 230/460V 3PH Base Mount TEFC FR56

ase mount TEFC replacement electric motor

745317

Strobe Low Profile Amber Lens Industrial Strobe

Polycarbonate lens
Single flash
Dimensions: 4" H x 5" diameter base
Available in surface mount or magnetic mount

41C5498

LiftMaster Wiring Harness Kit Low Voltage

For use with various LiftMaster® and Chamberlain® AC Chain Drive Garage Door Openers; manufactured after 2001

SPR50B18X114

Sprocket 50B18 1-1/4" shaft 1/4" KW

18 tooth sprocket for #50 chain

4580-304-CHARCL

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Charcoal 458-21 *** To Extent of Inventory

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

K41-0242-000

LiftMaster Output Sprocket INSL24UL

150BL

1-1/2" Light Brush Insert 6ft Long

Polypropylene bristles
Box quantity 50 pcs

CBC316-SMALL

Thimble 3/16" - 100 per pkg (Size Small)

GHX-383-3/4HP-LH

Doorlec Explosion Proof Gear Head 3/4 HP 208V 3PH ECB Left Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station

041-0192-000

LiftMaster Control Door Panel

Control Door Panel Replacement Kit
For use with various LiftMaster® Garage Door Openers featuring myQ® technology and Secure View™ Video Camera; manufactured after 2021 only

K41-0346-000

LiftMaster Transformer for INSL24UL

Transformer Replacement Kit. Compatible with LiftMaster® INSL24UL Series Industrial Lite-Duty Slide Gate Operators

2812-1-3/4"-BLK

Window 28"W x 12"H 1-3/4" thick Door Black Frame Sealed Glass

Cut out size: 28" W x 12" L

200722

Torque Force Extension Bracket for Spring Failure Device Short

Zinc Plated Steel bracket
Use with 1" or 1-1/4" SFSD device
Includes M10 nuts and bolts
Dimensions: L=2.9" OFFSET = 4:3/8" and 5"

PRO-GHC-10011U-R

Micanan 1 HP 120V 1P Gearhead Operator with N1 Eyes Monitored ECB Right Hand

External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation
Full function Smart 10.0 logic board and on-board receiver

.......more details

202-0022

TNR Composite Bottom Bar Arm for HDXL *** Price by Quote Only

10.1002.36

Truck Door Rivet 1/4 x 1-1/8 - 3/4 HD for #7515 Keeper Sold per Unit

Standard rivet used for installing #7515 Keeper
3 rivets are required per keeper

D029

ODCC Fire Door Adjusting Wheel

K1D8059-1CC

LiftMaster Main Control Board with Heat Sink

This is a Pre-UL2016 Seven Segment Main Control Board with Heat Sink.
Compatible with LiftMaster® Models CSL24VDC CSW24VDC RSL12VDC and RSW12VDC Pad Mount Gate Operators.
Complete replacement kit includes: logic board adapter harness and installation hardware.

K-SL5851011G3

LiftMaster Electrical Box Replacement Kit SL585 115V 1HP 1PH *** Price by Quote Only

Compatible with LiftMaster® SL585 Series 1-Phase 1HP Slide Gate Operators.

PRO-GHC-15011U-L

Micanan 1.5 HP 115V 1P Gearhead Operator with N1 Eyes Monitored ECB Left Hand

External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation
Full function Smart 10.0 logic board and on-board receiver

.......more details

102-0001

TNR Cement Rubber CC-EBLK-002 Black 40/Box

Shaw Almex

K75-36875-3

LiftMaster Gear Housing Kit GH 3PH L5

Compatible with Three Phase LiftMaster® GH Model Logic 5.0 Commercial Door Operators.
Complete kit includes: Housing Support Bracket Pads and Pressure Plate Housing with Cover Disconnect Kit Hand Chain Shaft Brake Kit and Installation Hardware.