Devanco Canada - Get The Right Garage Door Opener‎ and Parts

ME00071

Micanan Idler Shaft PRO-APTC

LB810-24

Laminated Bumper Standard Black 10" x 24" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TVB424-11SF

Steel-Faced Laminated Bumper Black 5 1/4" Projection Vertical Installation 24" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

LLB420-22SF

Steel Faced Laminated Bumper Black 4" Projection L-Shaped 20" x 22" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.

.......more details

TB412-14SF

Steel Faced Laminated Bumper Black 12" x 14" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB410-18SF

Steel Faced Laminated Bumper Black 10" x 18" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB410-18SF

Steel Faced Laminated Bumper Black 10" x 18" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB612-24

Laminated Bumper Standard Black 12" x 24" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB612-12

Laminated Bumper Standard Black 12" x 12" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

2376.182.29.870

Whiting Torsion assembly .182 wire size 29" spring length 87" shaft ** price by quote only

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

MK-00805

Micanan Heater Probe in Reducer 24V 20W Brass Fitting Field Install

44-60-300

Extension Spring 10' Door - 300 lbs Tan ** By Quote Only

Clipped ends
44" long 60" stretch 300 lb load

MK-00120

Micanan Heater Probe in Reducer Mod. (120V 20W 3/8" NPT)

MK-00546

Micanan Heater Probe in Reducer Mod. (24V 20W 3/8" NPT)

T007

Manaras Trolley Track 7ft for 1/2HP models *Actual length 114"*

For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)

HINGE-711-PCG

Powdercoated Hinge #7 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #7 - 0.87 lbs
Powdercoated Grey
For use with 7/16" stem rollers

HINGE-211-PCG

Powdercoated Hinge #2 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #2 - 0.71 lbs
Powdercoated Grey
For use with 7/16" stem rollers

9-22-1

Offset Strut Plate

MM-00035

Micanan Chain Keeper

T-50-H

FL-Heddolf 1-btn Transmitter ID220-1KA-311 MHz ** Discontinued

Keystone-Heddolf single button FL T-50 compatible remote
9 dip switch format
9V battery and metal clip included

LAGS141W

Fasteners Lag Screw Stainless Steel 1/4" x 1" Hex Washer Head 3/8" Sold Individually

VWS-34-BRONZE

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Bronze

Pan head
S point

VWS-34-CHARCOAL

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Charcoal

Pan head
S point

BRACKET111

Manaras Hood Mount Angle Bracket

7-19-1

Lock Bar Guide Only

37561S.S

Genie Belt and Bullet Assembly 8ft

For use on 8 ft doors
Compatible with the following:
SilentMax 1200 (Model 4042) 1000 (Model 3042) 750 (Model 3055) 550 (Model 2055)
ReliaG 650 (Model 1028) 850 (Model 2028)
IntelliG 1000 (Model 3024)

MP-00002-110V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

Controlling action of two lights- sockets supplied on cover

MOD076

Manaras Motor 208V/1Ph 60 Hz Modification No extra charge

The standard 240V/1Ph op. is coverted to 208V/1Ph incoming power supply

PRO-APTB-7511-U

Micanan 3/4HP 115V 1P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

22016

Doorlec Selector Switch 2 Position OFF/ON

9006-10

Excalibur Threshold Kit 10'2" x 6" W Solid Aluminum ** Price by Quote Only

Stands 1/2" tall
Built with 6061-T6 solid aluminum to withstand extreme weight and excessive traffic conditions.
Two-way fastening/seal system won’t shift buckle or leak
Top V-groove design provides for skid proof protection and improved tire traction on loading docks and incline ramps.
The 1/2" diameter wire access port makes it easy for sensor and security installations.
The kit comes complete with pre-drilled counter sink holes 3/8" anchors and sealant.

.......more details

14-1054

PVC Roll 8" x .080" Low Temp Clear Reinforced Smooth 300' for Replacement Strip Curtain

Clear and smooth. Suitable for most average applications.
Temperature Range: -34° C to 65° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.
Ribbed grade – for greater abrasion resistance and longer lasting clarity

MB-02004

Micanan Electric Motor Only 3/4 HP 110/220V 1PH C-Flange TEFC 56C

C-Flange TEFC electric motor
Fits models: GT GH GHC & GSD

74-5FG3A-C

Fuse 3 Amp 250V 5mm x 20mm Glass 5/Pkg

Fast Acting
Sold in packs of 5

MU33-2WIRE-LH-Y

Miller Edge MU33 2-Wire NM Left Hand Yellow - Sold per Foot

MU style bumpers are designed for use with aircraft hanger doors and large specialty doors.
Must specify the exact length in feet and inches when ordering.
Mounts vertically or horizontally
Sensitivity: nominal 8-13 ibf

Worksheet

WEL-200-T

EMX Wireless Edge Link Transmitter Unit only

Addition transmitter unit for multiple setup

Manual

PRO-HHD10021U-L

Micanan 1 HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

1 HP230V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation Manual (EN)Specification Sheet

37350R

Genie Network Adapter GN-BX

To be used in conjunction with Closed Confirm remote.
For use on IntelliG® and TriloG™ Pro Series models when using any Genie-Net Accessory.

Programming instructions

2807.206.325

Whiting .206 x 2-3/16 x 32-1/2" Curbside with Cones

MX00128-A

Micanan Clutch Pad 1-1/4" bore x 5" for PRO-GOHD *** NLA

7001-8-BRONZE

Commercial Side & Top Weather-Strip 8' Long - Bronze (BZ)

Bronze galvanized steel with bronze dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

MD-00111

Sprocket 410B9 X 3/8" No Keyway 2 SS 10-24

PRO-HBH-5011U-R

Micanan 1/2HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

1/2 HP115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

CP-BRAKE-DRUM

Lynx Brake drum

5-36-8

2" Vertical Track 14-GA 13'-4" (14' door) Sold per Pair

CUSTOM-8X40SC100

Devanco Loop 8 x 40 Saw-Cut 100' Lead-In

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation manual Manuel d'installation Loop placement guide Guide de positionnement des boucles

PRO-GH-10053U-R

Micanan 1 HP 575V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

221816

Decorative Hinge Assembly Carriage Style 16" Malleable Iron Sold per piece (175260)

As seen on carriage house doors
Total length is 18" for hinge and strap assemby.
1/4" thick
Mounting hardward sold separately
Sold per piece

ME00002

Micanan Clutch (Input) Shaft Only for Pro-H/HB

3/4" x 16-3/8"

5001-12-DK-BROWN

Residential Side & Top Weather-Strip 12' Long Commercial Brown

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

5001-18-DK-BROWN

Residential Side & Top Weather-Strip 18' Long Commercial Brown

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

5001-8-DK-BROWN

Residential Side & Top Weather-Strip 8' Long Commercial Brown

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

MV-00278

Micanan Cutler Hammer Reflective Photocell Kit 24V 0-25ft Range w/Brackets (MK00371/MV00371) *** No Longer Available. Use 60-2728 instead

Includes eye reflector and bracket
Same as MK00371 Eaton 1450E-6514

AW12K500-12

Miller Edge Air Wave Kit 12ft No Coil Cord**Discontinued

Kit Includes: AW12 Air Wave Switch Barbed Coupler (12') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs

PRO-HBH-7583U-R

Micanan 3/4HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

3/4 HP208V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

MS00005

Micanan Trolley Track 12-ga 14'-6" L Per Set ( Includes 2 Angles Only)

Track only- no chain or hardware

CA-104-412

Continuous Angle 1-1/2" x 4-1/2" x 104" L Sold per Piece

TRACK-3"-RAW-24

Raw Vertical Track 3" 24'-0" Sold per Piece

TRACK-3"-RAW-16

Raw Vertical Track 3" 184" 13g Sold as a PAIR

7073025

FAAC P Eye Bolt 400

26CW945255-CUT

Truck Door Intermediate Panel (15.5" x Cut-to-Size ) Painted White for Whiting Dryfreight

These panels are cut to customer's exact measurements.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

MX00203

Micanan Complete Control Box Only for PRO-HHDU/TU Nema 1 110V

MM00158

Micanan Solenoid Lever HR Left

Z9006

Shaft Key Stainless Steel Straight 3" x 1/4"

3" Straight Key
Stainless Steel

50-HERK-RC2

Hercules Infrared Programming Remote Red (50-HERK-RC2)

Conveniently choose from 8 different preset comfort functions to adjust detection fields mounting heights relay hold interval cross traffic optimization direction recognition people/vehicle separation slow motion detection turn on/off filter functions open the door manually and much more
Bidirectional
Fine-tune the motion detector from the ground without guessing if all the settings have been received by the sensor

CP-MO-34-1231WP

Lynx Electric Motor Base Mount 3/4 HP 110V 1 Ph TEFC

Electric motor only

PRO-H-5011U-LH

Micanan 1/2HP 115V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

Installation manual Specification sheet

TXMQ-2:1

Grove Gear Gearbox 2:1 Ratio 56C

To replace serial # 70518900

MK-00398

Micanan Capacitor 370V 20 Mf

For limited duty 220V operators

9281431440

Spring Wire .289 x 2.625 x 144" Coated RAW RH

.289 x 2-5/8" x 12'

2806.192.340

Whiting .192 x 2-3/16 x 34" Roadside with Cones

2807.192.340

Whiting .192 x 2-3/16 x 34" Curbside with Cones

12131

Doorlec Brake Disc 4" x 5/8" Keyway

Fits Doorlec model SGOH

.312-6-R

Cut-to-Length Torsion Spring .312 x 6" Right Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

K1A6426-2

LiftMaster Control Board for RSL12V / RSW12V ** USE K001A6426-2

MK00713

Micanan 10K OHM 1/4W Resistor

Replaces MK-00694

PRO-TB-5011-U

Micanan 1/2HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

MI00001

Micanan Motor Pulley 5L 5/8" ID x 2" OD

PRECUT-GALV

Special Order Pre-Cut Galvanized Spring Made to Order

1005-2-14

Aluminum Bottom Retainer U-Shaped 14' Long**Actual Length 14'2"***

For door thickness 2"

.218-3-144-RH

Torsion Spring Mini Storage .218 x 3" x 12ft Right Hand

MGH-6115-ECB-RH

Manaras 1.5 HP 120V 1P Jackshaft with Elect. Circuit Board Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Installation manual Sell sheet

10-1000-CUSTOM

Strip Curtain PVC Door Custom Made ** Price by Quote Only

39913625

Hitch Pin Forged Wire Handle 3/4" x 6-1/4" Red

Usable length is measured between the shoulder and the cotter pin

MCJH-12-115-ECB

Lynx MCJH Heavy-Duty Jackshaft 1/2 HP 115V with ECB UL325 ** Replaced by CDJH

New LX100 circuit board.
Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch magnetic solenoid brake.
Fully driven adjustable limit switches.
Heavy duty 3 button wall station (Open Close Stop).

.......more details

SPR41B36X1.5

Sprocket 41B36 1.5" Bore 3/8"x3/16" keyway

VBELT_4L290

VBelt 1/2" x 29" (4L290)

V-Belt not cogged

MK00188

Micanan Auxiliary Contact Block

Q239

LiftMaster Limit Switch Wire Harness K70-51094 **DISCONTINUED

Includes harness and 4 limit switches for Miracle One

.218-325-DS75

Mini Storage Spring for DS75 4x7 Door

Spring only with loop ends

5-36-7

2" Vertical Track 14-GA 12'-4" (13' door) Sold per Pair *** NLA

5-36-6

2" Vertical Track 14-GA 11'-4" (12' door) Sold per Pair

732

Fasteners Flat Washer 3/8" SAE 1" OD Zinc 1000/Box

7/16" ID x 1" OD x 5/64" thickness (ID: 0.4375’’ OD: 1’’ THK: 0.084’’)

OPH-6113-ECB-LH

Manaras Opera-H 3/4HP 120V 1Ph with Electronic Circuit Board Left Hand

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation manual Sell sheet

GD-STEND-21D

End Cap Steel 18G 21" Double 1-3/4"

COAX-5-RG6

Coax Cable Assembly 5 ft

Assembly includes union

FHKS3D-86

Stainless Steel Face Hardware Kit 3" Track Double End Stile 6 Panel 8 Sections

Kit includes: Top & bottom fixtures center hinges end hinges and self drilling hinge screws
All hardware is heavy-duty 12 ga material
Kits are configured for up to 2" door thickness. Other door thickness are available by request.