Devanco Canada - Get The Right Garage Door Opener‎ and Parts

19-41ML

Master Link #41

For #41 chain
ANSI Standard Carbon Steel

11801

Doorlec Oilite Cam

Fits 5/8" shaft fine thread.
Grooved 5/8" - 24 x 3/8"
Requires 2 per cam shaft

PRO-HHD-7511U-R

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation manual Specification sheet

MJ00014

Micanan Brake Shoe and Drum Assembly for Gearhead

For Micanan gearhead models: GH GHC GSD
Assembly includes both right & left shoe and the drum

MJ00002

Micanan Brake Shoe - Right **No Longer Available**

Only available in complete kit # MJ00013 or MJ00014 for PRO-GH

CP-BRAKE-ASSBLY

Lynx Brake Shoe Assembly

Brake shoes for all Lynx operators
Assembly includes the shoes
release spring and bolt included

PL-BO7-CRGSLIDE

Lynx Carriage Assembly (Nylon) ** No Longer Available

Proline / Lynx 455 Plus trolley slide assembly
For operators built from 2000 +

PL-A03-OLD-BRD

Lynx Replacement Logic Board Old Version ** This item is no longer available (NLA) **

Old version board works on operators with a blue cover
Replacement logic board for Napoleon/Lynx Proline garage door opener
For openers built before 2008
This board has a transformer (the new board does not)

H14G03

Hinge #3 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#3 position
Use between sections 3 and 4
Same as part number 243

.......more details

OSH-6532-ECB

Manaras Opera-SH 1/2HP 600V 3Ph with Electronic Circuit Board ** To extent of Inventory

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

Installation Manual Sell Sheet

LIMIT025

Manaras Single Snap-Action Limit Switch with Flat Lever

Replacement for LIMIT001
For all Manaras commercial operators prior to 2000 - except light duty models
Can be used on Doorlec Lynx and others
Unimax (SPDT)

Limit Switch Chart

RADIO-KIT004

Manaras plug-in receiver for Board 70 operators 390 MHz

Direct ECB plug-in receiver card kit (RADIO-RE101C) for adding or replacing on-site.
Maximum 16 transmitters per receiver.
Compatible with transmitters RADIOEM101 and RADIOEM103 SD/MD

RADIO-16

Manaras MT2-1000 2-btn transmitter 313 MHz****Replaced by RADIO-EM903

Open/Close remote for 2 doors
Comes with LED battery life indicator
9V battery included
Sunvisor clip included

Programming Instructions

RADIO-22

Manaras MT3-1000 3-btn transmitter 313 MHz

Open/Close remote for 2 doors
Comes with LED battery life indicator
9V battery included
Sunvisor clip included
To extent of inventory replaced by RADIO-EM903

Programming Instructions

1920

Whiting Top Closure Mounting Plate for Insulated Doors

9931MT

Allstar 1-btn Mini Transmitter 109391 318 MHz ** NLA

Open/Close mini remote for 1 door
Compatible with Allstar and MVP receivers
Tab for key ring
Power: 12-volt battery
Codes: 19683 (set by nine trinary dipswitches)
RF frequency: 318 MHz

.......more details

Programming Instructions

1336.4

Whiting Roadside Top Panel Closure Bracket for 8" radius track

1336.2

Whiting Roadside Top panel Closure Bracket 10" Raduis

GRD

Linear 1-Channel Delta3 Gate Receiver 310 MHz (DNR00101) ***Discontinued

Auto voltage sensing - no jumpers to set
Single Form ”A” (normally open) relay rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna three feet of coaxial cable and bulkhead connector
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 256 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

DR4

Linear 4-Channel Delta3 Receiver 310 MHz *** To Extent of Inventory

Activates four devices or UP DOWN STOP for one commercial device
310 MHz 8 dip switch
Power: 24 VAC/VDC
Dimensions: 4.9" W x 4.2" H x 1.3" D
Same as DNR00023A or DR4V

Programming Instructions

HAE00002

Linear Safety Beam Set *** No Longer Available

Set includes: Sender and Receiver photocells wire and connectors
Safety beams will work with all Linear operators that currently have safety beams installed.

1336.7

Whiting Stainless Steel Curbside Top Closure Bracket for 8" radius

1336.5

Whiting Stainless Steel Curbside Top Closure Bracket for 10" radius

4007-8FT

Aluminum Retainer only for Light Brush 90 degree

For angle application
For use with Light Brush or Vinyl Insert.

4006-12FT

Aluminum Retainer only for Light Brush 12' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1019-1-3/8-12'

Rigid Vinyl Bottom Retainer Flat 12' Long

Black - for door thickness of 1-3/8"

1019-1-3/8-14'

Rigid Vinyl Bottom Retainer Flat 14' Long

Black - for door thickness of 1-3/8"

1015-1-3/4-10'

Rigid Vinyl Bottom Retainer Raised Centre 10' Long

Black - for door thickness of 1-3/4"

1006-2-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

Black with flexible fin to touch door face.
For door thickness 2"

1003-1-5/8-24'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.
DIE # ES18010

1003-2-8'

Aluminum Bottom Retainer L-Shaped 8' Long

For 2" thick doors.

1003-1-5/8-14'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

7001-12-BROWN

Commercial Side & Top Weather-Strip 12' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-9-BROWN

Commercial Side & Top Weather-Strip 9' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1104-9FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 9' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

RCB-2560

Roller Chain Break #25 thru #60

Replacement tip included.

1104-8FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 8' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

7001-7-WHITE

Commercial Side & Top Weather-Strip 7' Long - White 7001-WW (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1106-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black

Aluminum retainer with black dual fin vinyl

1001-16-BLACK

Commercial Side & Top Weather-Strip 16' Long - Black

Aluminum retainer with black dual-fin vinyl

32-48-300

Extension Spring 8' Door - 300 lbs Tan ** Replaced by 27-48-300

Double - Loop
32" long 48" stretch 300 lb load
Springs sold individually

Spec Sheet

32-48-220

Extension Spring 8' Door - 220 lbs Green ** Replaced by 27-48-220

Double - Loop
32" long 48" stretch 220 lb load
Springs sold individually

Spec Sheet

32-48-200

Extension Spring 8' Door - 200 lbs Tan ** Replaced by 27-48-200

Double - Loop
32" long 48" stretch 200 lb load
Springs sold individually

Spec Sheet

32-48-160

Extension Spring 8' Door - 160 lbs Brown ** Replaced by 27-48-160

Double - Loop
32" long 48" stretch 160 lb load
Springs sold individually

Spec Sheet

32-48-130

Extension Spring 8' Door - 130 lbs Yellow ** Replaced by 27-48-130

Double - Loop
32" long 48" stretch 130 lb load
Springs sold individually

Spec Sheet

25-42-270

Extension Spring 7' Door - 270 lbs Orange ** check for availability

Double - Loop
25" long 42" stretch 270 lb load
Sold individually

Spec Sheet

25-42-170

Extension Spring 7' Door - 170 lbs Orange

Double - Loop
25" long 42" stretch 170 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-180

Extension Spring 7' Door - 180 lbs Gold

Double - Loop
25" long 42" stretch 180 lb load
Sold individually
Rated for 10000 cycles
Same as part number 118

Spec Sheet

25-42-150

Extension Spring 7' Door - 150 lbs Red

Double - Loop
25" long 42" stretch 150 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

95-00116

Truck Door Rivet 1-1/4" Stainless Steel ** To Extent of Inventoy

Stainless steel construction
Round head design
Cross Reference: T #89217-0040

95-00114

Truck Door Rivet 1" Stainless Steel

Stainless steel construction
Round head design
Cross Reference: T #89217-0032

93-00240

Truck Door Spacer Washer for Rollers

Used with Rollers to help adjust Roll up doors
Cross Reference: T #80020 W #6 #66 140100

28-32081

Truck Door 2" Horizontal Track with 8" Radius 120" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 120" Fits door sizes: Greater than 96" high
Cross Reference: W #11-3
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

28-32072

Truck Door 2" Horizontal Track with 8" Radius 107" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 107" Fits door sizes: Up to 96" high
Cross Reference: W #11-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

28-02290

Truck Door 2" Vertical Track & Right Angle Assembly 96.5" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 96.5" Fits door sizes: 72" - 90" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-1
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

28-02214

Truck Door 2" Vertical Track and Right Angle Assembly 120" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 120" Fits door sizes: 101" - 114" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-1
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

28-02201

Truck Door 2" Vertical Track & Right Angle Assembly 106.5" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-1
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

28-02090

Truck Door 2" Vert. Track and Right Angle Assembly 96.5" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 96.5" Fits door sizes: 72" - 90" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

27-24401

Truck Door Dual Torsion Spring Assembly 93/33 for Whiting Roll-Up Doors

Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
Springs are treated with rust preventative
Roadside cable drum is color coded RED
Specs: Shaft Length: 93" Spring Length: 33" Wire diameter: .182 - Winding cone color: Green

27-20202

Truck Door Winding Cone for Dual Spring Assembly for Whiting Roll-Up Doors (2-3/16")

Zinc die cast construction.
Universal design that will work for both Curbside (RH) and Roadside (LH) wound springs.
Cross Reference: W #2518
2-3/16" I.D.

26-40200

Truck Door Head Seal Only 96" Long for Roll-Up Doors

Seal molded from long lasting rubber
Cross Reference: T #69718 630300

25-60050

Truck Door Latch Plate for Todco Roll-Up Doors

Steel construction Zinc plated finish
Contoured for proper lock engagement
Cross Reference: T #70093 W #4021 270700

DM28VL-125

Cable Drum Vertical Lift 28' 1350-28 (1-1/4") Pair

28' Vertical Lift aluminum die cast alloy for 1-1/4" shaft.
3/8"-16 x2" hardened cup point set screws installed with red heads. -
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 28'-1".
Rated Lift per Drum: 1100 lbs.
Max. Cable Diameter: 1/4".

.......more details

DM18-125

Cable Drum Vertical Lift 18' 1100-18 (1-1/4") Pair

18' Vertical Lift aluminum die cast alloy cable drums for 1-1/4" shaft.
3/8"-16 x2" hardened cup point set screws installed with red heads.
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 18'-1".
Rated Lift per Drum: 660 lbs.
Max. Cable Diameter: 3/16".

.......more details

H11G07

Hinge #7 x 11 gauge

11 gauge # 7 hinge - 0.83 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

H11G06

Hinge #6 x 11 gauge

11 gauge #6 hinge - 0.79 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

CBC18

Thimble 1/8" - 100 per pkg

R5210

Pulley 4" Zinc Plated Steel with Sheave Strap

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/4"
Hardened inner race
Includes fork

903021ORBG

Operator Reinforced Bracket 21" Galvanized

Comes with clevis and clip pins. 24 per carton

25-10300

Truck Door Cable Anchor Bracket Zinc

Steel construction Zinc plated finish
Allows proper rotation of cable head
Cross Reference: T #61204 W #4004 240000

25-10276

Truck Door Universal Center Hinge Flush Mount **To extent of inventory

Steel construction Zinc plated finish
Eliminates routing of panels for easier installation
Cross Reference: H-325709

25-10275

Truck Door Universal End Hinge Flush Mount

Steel construction Zinc plated finish
Eliminates routing of panels for easier installation.
Removable cover allows roller change without hinge removal
Includes: Hinge roller cover & kep nuts
Cross Reference: H-325716

25-10250

Truck Door Bottom Fixture for Todco Roll-Up Doors

Steel construction Zinc plated finish
Cross Reference: T #69249 T #61352 W #4003 230000

4X10SC50

Devanco Loop 4' x 10' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

4X16PO50

Devanco Loop 4' x 16' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

1104-12FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 12' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.

BLSI12-PM39X

Pivin Drapeau Spring Assembly for BLS12

.393-334-L

Cut-to-Length Torsion Spring .393 x 3-3/4" Left Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

SPECIAL-ORDR-US

Special Order Item USA

Ordered to customer's specs

HTR-460

LiftMaster Heater Kit for AC Pad Mount Gate Operators 460V Only

Heater kit for pad mount 460V AC gate operators.
Includes transformer
Battery bracket NOT included.
Protects system to -40° F and installs on operator frame

9003-17FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle Bolt On 17' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

1104-7FT-GREEN

Residential Side & Top PVC Weather-Strip with cap 7' Long - Green (R)

Green rigid vinyl retainer with green flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

2200-309

Linear Double Pulley 7" 5/8" Bore

PRO-GH-7521U-L

Micanan 3/4HP 230V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

1116633904.S

Overhead 4-btn Transmitter 390 MHz

Replaces the 1091303904.S
4-channel transmitter opens and closes 4 doors
Codes using 9 dip switches with 3 positions
Battery (ALK12V) and visor clip included

08-11013

LiftMaster Bevel Gear 3/4" ID

Fits the LiftMaster GH operator

BT503L5

LiftMaster 1/2 HP 208-230V/460V 3p Commercial Trolley Operator with a Brake Logic 5 ***No Longer Available

Low profile trolley operator with brake installed
Comes with #48 roller chain

Installation manual Manuel d'installation Sell sheet Brochure

MA022

LiftMaster Arm Bolt

For use on Mega-Arm gate operator
Sold individually
5/16-18 x 29" hex head

19792B

Genie Replacement Door Bracket Zinc

Universal door bracket to connect door to door arm
Same as 19792A04

TRMC38E

Telco Light Curtain Bracket 4/pkg

T-833-H

FL-Heddolf 3-btn Transmitter 311 MHz ** this model is discontinued

Open/Close up to 3 doors or Open/Close/Stop one door
Heddolf-Keystone 3 button transmitter 311mhz
8 3-Position dip switch format
9V battery and metal clip included
Compatible with Allstar 3 button T-833
Same as P220-3K

.......more details

K001D8116-1

LiftMaster Power Board 3ph 230/460/575V L5 N4/4X

Complete kit includes: 3PH power board and standoffs required for installation

.262-3-3/4-RH-C

Torsion Spring .262 x 3-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .262 ID: 3-3/4" Length: 12 ft

ME123-YELLOW-U

Miller Edge Yellow Universal Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

50220

Doorlec Lifting J-Arm Assembly Trolley

OPJ-6113-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 120V 1 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details