Devanco Canada - Get The Right Garage Door Opener‎ and Parts

Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Worm gear reducer 40:1 ratio for high-torque and long life
Solenoid Disk Brake Prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Optional Friction Clutch available

.......more details

202-0019

TNR Bottom Bar Arm Black Harness 75D ** Price by Quote Only

same as 2622126

SPR50B42X1

Sprocket 50B42 1" shaft 1/4" KW

42 tooth sprocket for #50 chain

CCTD-04

Fuse 600VAC/300VDC Class CC Time Delay 4AMP Sold per Fuse

Sold per fuse

1104-18FT-CHI-CRM

Residential Side & Top PVC Weather-Strip with cap 18' Long - CHI Cream (C-C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
CHI compaible colour
Full case quantity only (12).

GALV-312-334-144-R

Torsion Spring .312 x 3-3/4" x 12ft RH Galvanized Yellow

Wire size: .312
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-375-6-L

Cut-to-Length Torsion Spring .375 x 6" Left Hand Wound Galvanized Yellow/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

MOD024D

Manaras Nema 4 3 Phase Control Panel w/ECB ** Modification to Operator Only

Price by quote only

GALV-375-6-144-LH

Torsion Spring .375 x 6" x 12ft LH Galvanized Yellow/Green

Wire size: .375
Inside diameter: 6"
Length: 12 ft
Galvanized

GALV-375-6-144-RH

Torsion Spring .375 x 6" x 12ft RH Galvanized Yellow/Green

Wire size: .375
Inside diameter: 6"
Length: 12 ft
Galvanized

227653

Linear Sprocket

HCI Drive Sprocket

GALV-363-6-144-L

Torsion Spring .363 x 6" x 12ft LH Galvanized Green/White

Wire size: .363
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

GALV-295-334-144-R

Torsion Spring .295 x 3-3/4" x 12ft RH Galvanized Blue

Wire size: .295
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-262-2-144-L

Torsion Spring .262 x 2" x 12ft LH Galvanized Red/Yellow

Wire size: .262
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-262-2-144-R

Torsion Spring .262 x 2" x 12ft RH Galvanized Red/Yellow

Wire size: .262
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-243-2-144-R

Torsion Spring .243 x 2" x 12ft RH Galvanized White/Yellow

Wire size: .243
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-207-2-144-L

Torsion Spring .207 x 2" x 12ft LH Galvanized Brown

Wire size: .207
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-262-258-R

Cut-to-Length Torsion Spring .262 x 2-5/8" Right Hand Wound Galvanized Red/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-218-2-L

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Galvanized Yellow/Orange Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-234-2-LH

Cut-to-Length Torsion Spring .234 x 2" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

K29-PB125

LiftMaster Reversing Motor Controller 115V KBPB-1

TRACK004

Manaras 1 Piece Galv Track 2x2x14'6 ** 1 pc Only

2 pices are required to make 1 set of tracks
Does NOT include the chain

OGH-6534-M-N1-RH

Manaras 1 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

MGR20-B-2U-M-P/FT

Miller Edge Sensing Edge Round Black 2-Wire Universal Outlet Monitored Sold Per Foot

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty •Monitored edge - pls specify the operator edge is connecting to •Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)

O02R2401

AirLift Op. Retaining Rod Complete 8ft Std Op. ** Price by Quote Only

GALEOR

Erone Metal Wireless Backlit Keypad 433 MHz

Blue backlit compact metal radio keypad
Wireless RF keypad polished heavy duty zamak@ cast alloy
Surface mount with Torx@ screws partially sealed with epoxy.
22 User codes 4 or 5 digits 1 Master code 5 digits.
Audible and visual feedback
Frequency : 433.92 MHZ

.......more details

Wireless System Chart

GAREX-PAINT-R12-WHTE

Garex Touch-Up Paint White for R12

OSH-6213-M-N1-RH

Manaras Opera-SH 3/4 HP 240V 1 Ph Monitored ECB w/N1 Photoeyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

2705.148_140

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 14" Long

Most common torsion spring for cube trucks
Specs: .148 x 2-3/16" x 14" Long
For Roadside order part # 2704.148*140

65-5501-16

LiftMaster Bi-Parting Mod Kit 16ft (Includes 19-5124 Chain #41 for 24ft Door and 10-5820-P Track for 20ft Door ***Actual length 275"***

Includes: 65-5501 Bi-Parting 19-5124 Chain #41 for 24ft Door 10-5820-P Track for 20ft Door

E/BLOP/121

Automatic Systems Option 1 Kit 2 LED Lights on Arm

Increases visibility of the arm on BL229 gate operator

VME1-230-1

Pivin Drapeau Electric Motor 1HP 230V 1PH FR56C

K74-13839

LiftMaster Wiring Harness Kit

For use with various LiftMaster® Commercial Door Operators

DHJ751L5-LH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 3/4 HP 115/230 VAC Logic 5 Left Hand***Discontinued

Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
Optimal for shopping mall applications with heavier rolling doors and grilles.
Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
Industrial Ball Bearings on 1" Output Shaft
Second Floor-Level Disconnect for Manual Lifting in an Emergency

.......more details

MINI-218-3-10-RH-W

Mini Storage Spring .218 x 3" x 10" RH Wagner End ***Price on Request

Special Order. Price valid on in stock springs only

BCT751L5CS

LiftMaster 3/4HP 115/230 Volt 1Ph Com. Trolley Operator w/ Brake Carwash and Roller Bearing Mods

New Logic 5
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.

.......more details

37350

Reversing Contactor CUL - 16 Telco 24V

CAP-390-468

Capacitor 390-468 MFD 3/4HP *** To Extent of Inventory

Same as CP-CAP-COM-450-540
Motor start capacitor

2807.162.220

Whiting .162 x 2-3/16 x 22" Curbside with Cones

2806.162.220

Whiting .162 x 2-3/16 x 22" Roadside with Cones

GDI-HB311

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1-1/4" Shaft UL-325 Photo Eyes Extra

Compact & Light Weight - Fast Installation
Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
Soft start soft stop

.......more details

GDI-HB341

GDI Direct Drive & Jackshaft HAML-RBH-A830 Nema 4 To Accept 1-1/4" Shaft Non Monitored

Compact & Light Weight - Fast Installation
Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
Soft start soft stop

.......more details

GDI-TML31

GDI Trolley Bracket Only

Add on feature for JDMG-LG op

GH303L5-RH

LiftMaster Gearhead with Brake 3 HP 208/230/460V 3-Phase Logic 5

Includes CPS-U photoeyes

OSH-6532-M-N1-RH

Manaras Opera-SH 1/2HP 600V 3Ph Monitored w/ N1 Eyes

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

OPH-6113-M-N1-LH

Manaras Opera-H 3/4HP 120V 1Ph Monitored Board w/N1 Eyes LH

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

22653

Doorlec Momentary Contact/Plunger Switch Black

K07-8063

LiftMaster Upper Crank BG790

Also known as: 07-8063 078063 G078063

K74-39295-2

LiftMaster E-Box UL325 SL585

K74-39295-2MC is a Electrical Box Replacement Kit with UL325 Safety Standards and Compliance Regulations
For models SL585503UL SL585103UL

333-042

Serco Spring (Latch Bar) ** Price by Quote Only

For Serco loading docks

SMF5005K

Serco Holdown with Rack Bar ** Price by Quote Only

A brake band hold-down for a mechanical dock leveler includes a frictional brake that grabs the hold-down when the ramp is at the proper elevation.
If additional upward force (this can happen when trailers move up and down when trucks are loaded or unloaded) is applied to the ramp the frictional brake will give way just enough to accommodate the change.
This prevents the dock leveler ramp from being damaged.
For Serco mechanical dock levelers

GHX-383-1HP-LH

Doorlec Explosion Proof Gear Head 1 HP 208V 3PH ECB Left Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station

GHW-353-1.5-RH

Doorlec Ind. Duty Jackshaft Carwash Op. 1.5 HP 575V 3P with Nema4 modification

With DC2000 logic board
Worm-Gear Jackshaft type Industrial operator NEMA 4/12

MB-05506

Micanan Electric Motor Only 3/4 HP 230/460V 3PH Base Mount TEFC FR56

ase mount TEFC replacement electric motor

K41-0259-000

LiftMaster Chain Guard IHSL/ INSL24UL

ZAP-8070

Zap Auto Lock 8070

8070 Auto-Lock provides integrated security with an electronic solenoid locking system that releases a shoot bolt above a roller when door is stopped and withdraws prior to door operation

CRG5120P

Pentagon Crank Gear 5:1 20kg PVC *** Price by Quote Only

HD8460-REPL-KEY

Replacement Keys for HD8460 Random Code 00-99 Sold per Pack of 100

100 key pack numbered 00 thru 99

SD751L5-LH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 115V Left Hand (Must include hardware box)

Perfect for split and sliding doors involved with industrial applications.
It is installed above the door and corresponds with the direction the door will be traveling.
Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
Built In Security+ 2.0 radio receiver
Solenoid brake included

.......more details

18T

Skylink 2-Button Keychain Remote Rolling Code

Compact-size dual button transmitter can operate two garage doors with 18R Garage Door Receiver
Alkaline battery included. FCC/IC approved.

1016-ADHSVE-CAULK

Adhesive for Storm Shield Caulk Tubes 10.3oz

For use with 1016

2376.182.275.930

Whiting Torsion assembly .182 wire size 27-1/2" spring length 93" shaft ** price by quote only

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

111031.0001.S

Overhead Door Link Hoist Release RSX

Hoist link for the Overhead Door RSX (rolling steel - hoist) commercial operator

7-6113

RW Hanger 27B Truck & Pendant Sold Individually

K94-38062-2

LiftMaster Power Board ID Resistor 1HP 3PH

This is replacement Power Board ID Resistor (1HP 3PH). Compatible with LiftMaster® Models SL585U and SL595U Slide Operators

041-0189-000

LiftMaster Dual Light Pod Kit No Camera Model

Dual Light Pod Replacement Kit
For use with various LiftMaster® Belt Drive and Chain Drive Garage Door Openers featuring myQ® technology dual light lenses and are not equipped with a video camera; manufactured after 2021 only
This replacement kit is compatible with the following models: 84501 84501-267 84602

PRO-GH-5053-PANL

Micanan 1/2HP 575V 3P Gearhead Operator N Controls *** Price by Quote Only

Special Order by Quote only

2705.156_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .156 x 2-3/16" x 18" Long
For Roadside order part # 2704.156*180

MOD117

Manaras Special Application Chip Modification

217483

Torque Force Extension Bracket for Spring Failure Device Long 2/pc Set

Zinc Plated Steel bracket
Use with 1" or 1-1/4" SFSD device
Includes M10 nuts and bolts
Dimensions: L=3.88" OFFSET = 6"

Installation instructions

MD-00142

Sprocket 410B17 3/8" Bore NO KW 2SS

21-7575-1

LiftMaster Transformer 575V 3 PH

For use with various LiftMaster® Logic 5.0 NEMA 4 and 4X Commercial Door Operators

RN0035-SS

Roller 3" Black Nylon 4" Stainless Steel Stem Precision Sealed Bearing 6203

A supreme precision sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
100 lb load 100000 cycles for a 12' door
Overall length is 5.17” and the shaft (stem) is 3.90” which does not include the shoulder.

202-0022

TNR Composite Bottom Bar Arm for HDXL *** Price by Quote Only

5415-2

EMX RAVEN Dual Relay Microwave Motion Sensor

Distinguish between vehicles and pedestrians
Two configurable relay outputs
Adjustable sensitivity and cross traffic suppression
8-23 ft (2.5-7 m) mounting height
Optional remote control for easy programming

5416-2

EMX RAVEN Programming Remote

Makes it easy to set up and make adjustments to all key parameters of the RAVEN motion detector while at ground level
Remote sold separately

Quick Start Guide

K-SL5851011G3

LiftMaster Electrical Box Replacement Kit SL585 115V 1HP 1PH *** Price by Quote Only

Compatible with LiftMaster® SL585 Series 1-Phase 1HP Slide Gate Operators.

104-0011

TNR Chain Tensioner CT3201 ELS16-B1

Ansi #80

PRO-GH-30053U-RH

Micanan 3 HP 575V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation
Universal Right or Left Hand mount

.......more details

205950.0001

Wayne Dalton Bulb Type Astragal 770/7780/790 Sold per Foot

OGH-6112-MON-RH

Manaras 1/2 HP 120V 1Ph Gear Head Operator with Monitored Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

SMT7000TP5

Telco Thru Beam Transmitter DC M18 5M Cable

Supply Voltage: 10 - 30 V dc
Light Source: Infrared (880 nm)
Control Feature: Test Input
Sensing Range: 20 m
Housing: M18 x 1 Plastic
Connection: 5m cable

.......more details

2704.187_30

Whiting Roadside Torsion Spring.187 wire 2-3/16" ID 30" Long

Torsion spring wire only
.187 wire size

O04R2009

AirLift Bracket Horizontal 20" Flat Bar

34102

Doorlec V-belt Pulley 9" x 1" bore 5L

Fits model ETBH

K20-3050M-5

LiftMaster Electric Motor 1/2 HP 575V 3Ph BM/CF

Also known as: K20-3050M5 20-3050M-5
For use with various LiftMaster® 3-Phase 575V Gate Operators and Perimeter Access Solutions

DEV-CHS

Devanco Chain Hoist Assembly for RSSD/RSFD

For use on Devanco rolling steel service doors and fire doors

K79-13493-600

LiftMaster Logic Board Replacement FDC5021UR

Replacement board for fire door model FDC5021UL

PAN-TX-001B

Manaras Transf Panel Option 600V-1PH to 240V-1PH

An optional add-on when purchasing a RSH/RVH operator

3228.6

Whiting 2" Nylon Roller 3" Shaft Sealed Both Sides Upgrade Option w/Door Package

This is a Whiting original roller upgrade package on a complete door

GHW-383-3-230V

Doorlec Industrial Gear Head Door Operator 3 HP 230V 3P with ECB and Nema4 modification

Extra heavy-duty industrial-type electric door operator for damp environments.
Worm gear reducer 40:1 ratio
#50 roller chain and sprockets from operator shaft to door shaft. (#60 chain optional)
Door speed: 7 inches per second (approx.)
Adjustable torque limiter (also called friction clutch)
Rotary type limit switches

.......more details

MG020-Y-2E-P/FT

Miller Edge Sensing Edge Yellow 2-Wire End Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

15-50B40QGH

Sprocket Kit 50B40 1.25" Bore x 1/4" Key w/ SS

SPR50B18X1

Sprocket 50B18 1" shaft 1/4" KW

18 tooth sprocket for #50 chain

EHJ-383-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 208V-3Ph

Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

GH-321-3/4

Doorlec Industrial Gearhead Door Operator 3/4 HP 230V 1-Phase

Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Worm gear reducer 40:1 ratio for high-torque and long life
Solenoid Disk Brake Prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Optional Friction Clutch available

.......more details


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login