Devanco Canada - Get The Right Garage Door Opener‎ and Parts

Q311

LiftMaster Surge Protection for Master / Second *** No Longer Available

For the Miracle-One two arm gate operator - master/ slave
Same as part no. K74-50329

TA-2-S/L-1200

Assembled Track Set 2" Comm 14g Bracket Mount for 1-3/4" Door Std Lift 12" Radius

Includes horizontal and vertical tracks

MM00008

Micanan Frame GHC MSI0034

65853

Marantec Programming Wire - Old ML to New M3

Used when programming old style remotes to the newer style 3 series remotes and Wireless Keypads.

112561

Allstar MVP-RE 24V 8 Wire Receiver 288 MHz *** NLA

Three channels – three relay outputs
8-wire operator connection
Wire whip antenna with “F” connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683

.......more details

106-0005

Rodent Block Pull Chain Seal 2"

Often overlooked and left unprotected the opening for the pull chain on dock levelers is an ideal entry point for mice and rats.
The chain provides a built-in ladder for pests and the chain opening is more than big enough for rats or mice to squeeze through.
Features solid cast aluminum construction easy to install and completely cover the chain opening.
The seals are designed to sit completely below the surface of the dock plate and will not interfere with material handling equipment.

VWS-34-MED-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Medium Oak

Pan head

K72-12487

LiftMaster Limit Shaft Kit MT BMT MJ mechanical operators

For models MT BMT MJ mechanical operators
Includes limit shaft bearings limit nut sprocket. RPM sensor roll pin & e-ring

.331-334-R

Cut-to-Length Torsion Spring .331 x 3-3/4" Right Hand Wound Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

NO_RAILS

LiftMaster Residential Operator Head Only $20.00 reduction

DC300-CABLE-P/FT

Dyna-Hoist 5-Conductor Cable Sold per Foot Increments of 5ft- Max 25ft

Sold in increments of 5ft to a max of 25ft

10-10354

LiftMaster Brake Release Arm

his is a replacement Brake Release Arm. For use with various LiftMaster® Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: 106106

425-0090

RW Hanger 70 Flush Pull Steel Sold Individually

Formed Steel construction
Face: 7" H x 4-1/2" W
Pocket: 4-1/2"H x 1-3/8"W x 1-1/4"D

MA008

LiftMaster Pulley Gear Reducer 8"

Also known as: MA-008
Compatible with various LiftMaster® Gate Operators

K41-0256-000

LiftMaster Interlock Harness IHSL24UL

GALV-312-258-L

Cut-to-Length Torsion Spring .312 x 2-5/8" Left Hand Wound Galvanized Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

OSH-6114-M-N1-RH

Manaras Opera-SH 1 HP 120V 1 Ph Monitored w/N1 Eyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

31369-114

Doorlec Sprocket 60B12 1-1/4" Bore

K79-13493B-500

LiftMaster Logic Control Board Assembly (FDO FCC LMPLC 500V CHIP)

For use with various LiftMaster® Commercial Door Operator Models

GALV-343-258-144-L

Torsion Spring .343 x 2-5/8" x 12ft LH Galvanized Blue/Red

Wire size: .343
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

GALV-273-2-144-R

Torsion Spring .273 x 2" x 12ft RH Galvanized Orange/Red

Wire size: .273
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-234-258-144-R

Galvanized Torsion Spring .234 x 2-5/8" x 12ft RH Blue/White

Wire size: .234
Inside diameter: 2-5/8"
Length: 12 ft

2200-983

Linear Brake and Puck HSLG ***NLA Replaced by 2200-983-UPS

5001-10-WHITE/BLK

Residential Side & Top Weather-Strip 10' Long - White Aluminum/Black Vinyl

Painted aluminum retainer with flexible dual fin black vinyl.
Residential use.

Q277

LiftMaster Wiring Harness Kit DC2000 K94-50262****no longer available

Compatible with LiftMaster® Models SL3000 and CSW200 Perimeter Access Systems

GALV-375-6-144-LH

Torsion Spring .375 x 6" x 12ft LH Galvanized Yellow/Green

Wire size: .375
Inside diameter: 6"
Length: 12 ft
Galvanized

TRACK005

Manaras 1 Piece Galv Track 2x2x16'6 ** 1 pc Only

2 pices are required to make 1 set of tracks
Does NOT include the chain

MR00001

Micanan Brake Disconnect Cable 3/32" x 12" Long

C12B

Felco C12B Cable Cutter Bench Mounted 3/8" Capacity* Special-Order Item Sold by Quote Only

** Capacity of 3/8 inch diameter or smaller on stainless steel cable.
The unique triangular jaws never leave a frayed end.
The C12B bench-mounted wire rope cutter mounts easily to your workbench and can be single hand-operated
Length: 19 inches
Weight: 3 lbs.

111854.0005

Overhead Logic Board 575V 3Ph RSX/RHX

For RSX/RHX commercial ops. 575V

K07-8063

LiftMaster Upper Crank BG790

Also known as: 07-8063 078063 G078063

K07-8064

LiftMaster Lower Crank BG790

Also known as: G078064 07-8064

234-143

Serco 3/4" SAE Flat Washer ** Price by Quote Only

For Serco loading docks

8-9069

Serco Latch Bar ** Price by Quote Only

For Serco loading docks

50175

Doorlec Adjustable Torque Limiter GT/GH Models 3HP Operators

Also known as Friction Clutch

SPR50B18X1

Sprocket 50B18 1" shaft 1/4" KW

18 tooth sprocket for #50 chain

169027

Euro Side Hinge (25234) Zinc Plated

Steel Zinc plated
Thickness: 0.098"
Pin: 0.275"
Mounting holes 0.275"
Use with Euro center hinge #169026

71-17148

LiftMaster Fuse Link Kit FDC

Fuse Link Replacement Kit for use with various LiftMaster® Fire Door Commercial Door Operators and Commercial Access Solutions

MA0137

LiftMaster Shear Pin #7 Mega Arm

SHAFT105

Manaras Limit Shaft 5/8"-24 UNEF LG

GH-321-1

Doorlec Industrial Jackshaft Door Operator 1 HP 230V 1P with ECB

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

MA006

LiftMaster Mega Arm Chassis

Sturdy aluminum construction
For LiftMaster MADCBBC MATDCBB MASTDCBB commercial parking gate operators

K79-13493-2-600

LiftMaster Logic Board Replacement Kit FDCL Firmware Version 600

Replacement board for fire door model FDCL

27091A

Genie Limit Worm Gear for PMX500

Limit worm gear sits in the Limit switch plate and works with the Limit Worm Drive to activate the limit wheel
Works With Genie Models PMX 500-IC/B IC250/B

510.2543.00

Whiting Narrow Mounting Angle for Posts Under 2-1/2" IN

This is an upcharge when ordering certain doors

VERMONT-R16

Garex Ready to Install Door Special Order

R16 Insulation - Short Panel with vertical lines carriage style - Panel spacing does not allow for decorative handles - Decorative hinges can be used - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

106141

Marantec Shaft Adapter

ETB-321-1/2HP

Doorlec 1/2HP 230V 1PH Trolley Door Opener

Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.

CBC532-SS

Thimble 5/32" Stainless Steel Sold Individually

BK000-B/BLACK

Residential Top Roller Bracket Adjustable 2-Bolt Black Powder Coated Sold per Piece

Sold per piece - not sold as a pair
Meant for 2" hardware
Individually wrapped

MGH-6435-ECB-LH

Manaras 1.5 HP 480V 3P Jackshaft with Elect. Circuit Board Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

K72-12591

LiftMaster Clutch Shaft Kit HMJ

K1A6408

LiftMaster APE Kit 24V

For use with various LiftMaster® Swing Gate and Slide Gate Operators

K76-34697

LiftMaster APS Encoder 24V

For use with various LiftMaster® Commercial Slide and Overhead Gate Operators

VPL-12

Autogate 12V Motor

SHAFT036

Manaras Limit Shaft 5/8"-18x12

PRO-SD-10011-U-LH

Micanan 1 HP 115V 1P Horizontal Sliding Door Op. Monitored ECB N1 Eyes Left Hand

Designed for use on commercial / industrial sliding doors or sliding fire doors
External radio control terminal strip
3-btn O/C/S control station Nema 1
#41 roller chain & sprockets on all internal drives
Heavy duty 5L v-belt
Solenoid brake standard

.......more details

SPRING009

Manaras Clutch Spring 5/8"

GH-6533-0000-CBOX

Manaras Control Box for GH 600V

Control box only

.218-2-L-C

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.207-258-L-C

Cut-to-Length Torsion Spring .207 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

MG-00127

Micanan Plastic Spacer for Boards (Short Length 0.382)

MK-00696

Micanan 4-Pole Terminal Strip

MK-00045

Micanan Overload Reset 1-Phase 18 Amps

MK-00404

Micanan Reversing Contactor ABB Size 1 120V w/Interlock

LC2K1210B7 mini contactor

MV-00019

Micanan Pull Cord SPST Lever Type - Nema 4

ME110-2W-BLK-E

Miller Edge 2-Wire Black End Outlet 7/8" wide x 3/4" high Sold by the Foot

Electromechanical slide in edge for counter shutters rolling doors and barrier arm applications.
Touch sensitive signaling allows for immediate stopping and reversing of motion.
Temperature range -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet

PRO-APTB-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

SC-6

Wheel Chock SC-6 Aluminum

Excellent Surface Grip on Tire and Ground
Lightweight Aluminum
Size: 6" wide x 6-1/2" long x 6" high

K23-30716

LiftMaster Stop Switch 120VAC 6A

Same as 20-30716

MK01065

Micanan Light Duty Resistor 2 OHM 25W c/w Wire Leads

MK-00120

Micanan Heater Probe in Reducer Mod. (120V 20W 3/8" NPT)

MK-00694

Micanan 10K OHM Resistor *** DISC Repl by MK00713

PRO-PL-INV-200-23

Micanan Wall Mounted Control Panel with Variable Frequency Drive Mod. 2HP 230V 3 PH

Additional charges apply for adding PBS on cover or if panel is not ordered with an operator

MM-00035

Micanan Chain Keeper

2376.177_27.830

Whiting Torsion assembly .177 wire size 27" spring length 83" shaft

126474-7K

Spring Failure Device For 1" Shaft RH & LH Assembly

Designed to reduce the risk of the door falling in the event of spring breakage
3-3/8" offset between wall and shaft (separate extension bracket available for offset of 4-3/8" up to 6")
For 1" shaft (1-1/4" shaft available for special order)
Fits 1-3/4"-6" Torsion Springs
One device per spring is required
Not for use with duplex springs

.......more details

RS1311

Roller 3" Steel 11" stem Precision Bearing

Steel Roller Wheel diameter: 3" 11" stem length 7/16" stem dia

K94-33961

LiftMaster Wire Harness Kit MT MJ MH

PRO-HBH10053U-R

Micanan 1 HP 575V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

1 HP575V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

2376.156.17.770

Whiting Torsion assembly .156 wire size 17" spring length 77" shaft

33101

Overload 0.90 to 1.50A

Setting range 1.1 - 1.6A

MU22-4WIRE-U-Y

Miller Edge MU22 4-Wire Universal Yellow - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

BRAKE012

Manaras Band Brake Retrofit Kit Old GH/MGH

Does not include the solenoid
Replaces BRAKEPART012

MP00054

Micanan Track and #410 (#48) Chain for 8' h Door *Actual length 126"*

For 1/3 & 1/2 HP Micanan trolley operators

DT3+1

Linear 3+1 Channel Transmitter 310 MHz

Activates one GRD gate receiver and up to three separate Delta-3 receivers
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 independent codes for gate + 64 multi-channel codes for doors (set by dip switches)
Frequency: 310 MHz

.......more details

Programming Instructions

9150000626

3/32" Stops ONLY 100/pkg

Stops only 100 per pack

FHKS3D-86

Stainless Steel Face Hardware Kit 3" Track Double End Stile 6 Panel 8 Sections

Kit includes: Top & bottom fixtures center hinges end hinges and self drilling hinge screws
All hardware is heavy-duty 12 ga material
Kits are configured for up to 2" door thickness. Other door thickness are available by request.

345

Cable Clamps Galvanized 1/8" 100/pkg

Galvanized malleable cable clip

5001-WG-10-MOAK

Residential Side & Top Weather-Strip 10' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

5001-WG-8-MOAK

Residential Side & Top Weather-Strip 8' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

BRACKET003

Manaras Disconnect Lever Bracket MJ

OSH-6113-CONT-L

Manaras Opera-SH 3/4HP 120V 1Ph with Contactor Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation manual Sell sheet

OPH-6532-CONT-R

Manaras Opera-H 1/2HP 600V 3Ph Contactor Model Right Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"

Installation Manual Sell Sheet

7001-WG-10-MO

Residential Wood Grain Side & Top W/S Medium Oak 10' Long - Painted Screws to Match

Medium Oak retainer with Medium Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-9-CO

Residential Wood Grain Side & Top W/S Cherry Oak 9' Long - Painted Screws to Match

Cherry Oak retainer with Cherry Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

71-B3PH

LiftMaster Internal Brake Kit w/Solenoid 208V/230V 3PH for L5 Operators

Works with Logic 5 commercial operators and SL585/SL595 U and UL gate operators

GH4416-04-L

Green Hinge #4 12-ga Left Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

9382054125

Square Torsion Spring .343 x 5-1/4 x 41.25" with Cones RHW

41.25" long = 160 coils

OGH-6114-ECB

Manaras 1 HP 120V 1Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login