Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
CAPXL

LiftMaster Connected Access Portal High Capacity

  • Connected Access Portal High Capacity Cloud-based access control for residential communities.
  • Capacities: 4 Controlled Gates/Doors
  • Wireless Link for up to 8 LiftMaster® Operators
  • 4 to 8 Digit Entry Codes
  • 4 to 6 Digit Directory Codes
  • 50000 Local Resident Capacity
    • .......more details
50183

Doorlec Brake Assembly 575V

  • Brake assembly consists of solenoid drum shoes plate spring cover and fasteners
  • For all V-belt driven models that have brakes
PRO-H-7511E-RH

Micanan 3/4HP 115V 1P Hoist Operator NM ECB No Eyes Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Solenoid brake OPTIONAL
  • Non-monitored board NO photoeyes
Installation manualSpecification sheet
41AC150-1M

LiftMaster Electronic Circuit Board Assembly 315 MHz *** NLA Repl by 41AC050-1M

  • For Sears / Craftsman garage door opener
MK-318-2

Skylink 2-Button Keychain Transmitter

  • Easy to program.
  • Remove key fob from the car for enhanced security.
  • Compact-size 2-button transmitter can operate two garage doors with GB-318C Garage Door Receiver (sold separately).
  • 3V Lithium battery included.
  • FCC/IC approved.
  • Works Mastercraft made by Skylink
    • .......more details
LD-11

EMX Base Socket 11-Pin DIN Rail Mountable Black (Was formally Grey)

  • For use with D-TEK detectors (most commonly used)
  • Hourglass shaped
USVD-4X

EMX Ultra Sonic Vehicle Detector 2700-1

  • The USVD-4X Drive Thru Vehicle Sensor uses patent pending Triangular Planar Array (TPA) technology to detect the presence of a vehicle.
  • The USVD handles any drive thru operation such as fast food banking pharmacies car washes and parking garages.
  • The USVD is simply mounted on a post or order box and aimed at the location where a vehicle would pass to initiate a transaction. No set-up or adjustments required.
  • Aux. relay settings for pulse on ENTRY EXIT or BOTH
  • Output delay option for 1 2 and 4 seconds
  • Operating range: 1ft. – 5ft.
    • .......more details
Installation ManualSell Sheet
21-35077

LiftMaster Transformer 575V 24V 40VA

  • 575V PRIMARY 24V SECONDARY 40VA
  • Same as K21-35077
50-105

LiftMaster Black Coil Cord 4-Wire 18-ga 20 ft. Extended Curly Cord

365LMC

LiftMaster Universal Plug-in Receiver 315 MHz

  • Compatible with any garage door opener with a simple 2-wire dry contact
  • Includes 2-conductor bell wire
  • Able to accept 8 Security+ transmitters & 1 digital keypad
  • Compatible remotes; 893MAX 890MAX 892LT 373LM 371LM 374UT 375UT
Programming InstructionsInstructions de programmation
380LMC

LiftMaster Remote Work Light

  • For use exclusively with the LiftMaster Wall Mount Garage Door Opener (model 8500)
  • Provides 200 watts of light with adjustable light time delay
  • Lights are controlled by opener activation or control panel light button
  • Add as many lights as you wish – perfect for brightening up a dark garage or workspace
Installation ManualManuel d'InstallationTroubleshooting
R-831-J

FL-Allstar 1-Door O/C/S Receiver in Oil Tight Case (JIC) 107478-311 MHz **NLA

  • This receiver is included in a JIC box.
  • Like the model R-831-P it has three isolated contacts to open close and stop the doors and a possibility of 6 561 operational codes to enhance the security level. If your operator can be controlled by three button station then our R-831-J receiver and commercial remote controls will work with your operator.
  • Manufacturer's model number: 190-107478
  • Dimensions: 9 1/4" x 6 7/8" x 1 1/4".
Programming Instructions - Dip Switch VersionProgramming Instructions - Learn Button Version
CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

  • Single limit with curved actuator lever
  • Switch attaches directly to the Logic 6000 board
DR4

Linear 4-Channel Delta3 Receiver 310 MHz *** To Extent of Inventory

  • Activates four devices or UP DOWN STOP for one commercial device
  • 310 MHz 8 dip switch
  • Power: 24 VAC/VDC
  • Dimensions: 4.9" W x 4.2" H x 1.3" D
  • Same as DNR00023A or DR4V
Programming Instructions
655202

LiftMaster Pneumatic 14' Sensing Edge with 2-Wire Take-Up Reel

NIR-KIT

Emx Industries Retro Reflective Photoeye Sensor with Reflector and Hood (5200-K)

  • Watertight packaging
  • Detection range: 30 feet
  • 6 foot cord
  • Reflector Hood Bracket and mounting hardware Included
  • 2 LED indicators
  • Sensitivity adjustment
    • .......more details
P-9931R-4F

Pulsar MVP 1-Channel 4-Wire Gate Receiver 318 MHz P-111645

  • One channel
  • 4-wire operator connection
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
    • .......more details
Programming instructions
BK438/PR-USA

End Bearing Plate Flanged 11-GA 4-3/8" with Bearing. Commercial Sold as a pair

  • For commercial applications Used on wood jambs
  • Includes (1) RH and (1) LH plate with bearing
  • EBF438- USA Style
950-188

Richards-Wilcox 2" or 3" Single Bottom Cable Bracket Left Hand

  • Original Richards-Wilcox part
30001

Doorlec Brake Solenoid 575V with wire leads

.225-2-R-C

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
SPRAY-5P6

Aluminum Touch Up Spray Paint 350g Iron Ore / Minerai de Fer #5P6

  • 140g
620-101416

Linear GTO Alarm 24VDC Non-Pulsed Apex

PRO-GH-5011U-R

Micanan 1/2HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
38066R

Genie Series II Intellicode Wall Console GBWC2-BX ** Disc. replaced by 39165R

  • Series II Multi-Function Wall Console (White Color)
  • Vacation Lock button disables remote access
  • Light Control Button
  • This item has been discontinued and replaced by #39165R
ALUM-559

Aluminum 24" x 100' Spool Pebble / Kaki # 559

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 559
  • Reverse side is #431 Bright White
Colour chart
8355W

LiftMaster Premium 1/2HP AC Belt Drive Wi-Fi

  • Free MyQ® Mobile App so users know their home is secure.
  • Built-In Wi-Fi® for the easiest way to connect the garage.
  • Real-Time Alerts indicate the status of the garage door via email or push notifications.
  • Monitors and Controls the opener from anywhere using mobile devices.
  • Belt Drive system for quiet maintenance-free performance.
  • Motor Vibration Isolation System (MVIS®) provides quiet reliable operation.
    • .......more details
Installation manualSell sheetBrochureReceiver Logic Board Conversion List
12123

Doorlec Coupling 1-3/4" x 5/8" bore 4 Pin coupler

  • Used on model LJH
21701

Doorlec Limit Switch Single ATM 15 AMP

54-440

Limit Switch Snap Action Standard Short Hinge Roller Lever S54

  • SPDT
29202

Doorlec Transformer 550Vpr 120V sec. 35VA

RA-AD-WWS-MULTI

Lynx Wireless Wall Station AD455 372 MHz

  • Wireless for easy installation anywhere
  • Controls door open-close light on-off
  • Programmable pet opening (Opens to a pre-selected height of 6"-30")
  • Vacation Slide-Lock: Disables remote transmitters keyless entries and wall stations.
  • 10-second closing safety delay
  • Transmitter program button
    • .......more details
Programming InstructionsCompatibility chart
MBAT

LiftMaster Battery 7AH 12VDC

  • Single battery good for 40 cycles
  • Dual batteries recommended on gates over 16ft or 600 lbs.
20418R

Genie Limit Switch Lead Wire Brown

  • Brown - Used to connect down limit to sequensor
  • For Screw drive models
892LT

LiftMaster 2-btn Sec+ 2.0 Learning Transmitter

Programming InstructionsInstructions de programmationSell Sheet
K001A5566

LiftMaster GL Replacement Board ***Discontinued. No Replacement.

  • Replacement Logic Board for LiftMaster Gate Operators
  • Fits Slide operator SL570 SL575 SL580 SL585 SL590 SL595
  • Fits Swing operators SW420 SW470 SW490
41A3489

LiftMaster Complete Trolley Assembly for chain drive

  • For chain drive models 1984 +
  • Compatible with Sears Chamberlain
Installation Manual
BOARD065

Manaras Replacement Circuit Board (No Monitoring)

  • Replacement kit that includes BOARD060 (control board) & BOARD066R (power board)
  • For all Manaras operators built before October 2010
  • For newer models built after October 2010 use BOARD070 or replacement kit BOARD075
Installation ManualManuel d'installationReplacement ChartGuide de remplacement
HD3120

Commercial Inside Slide Lock for 2" or 3" track

  • Track use: 2" or 3"
  • Throw: 2-11/16"
  • Offset from inside face of door to lockbar: 1/2"
  • Bright zinc plated steel with spring actuated lock bar.
  • Same as part number 270
10FT-BELT-LINEAR

Linear 10ft Belt Drive Rail for residential openers (HBT10C)

  • For use with Nice/Linear LDCO863B LDCO841 LDCO801 LCO75 LSO50 LDO50 and LDO33 garage door operators.
  • Fully-assembled and pre-tensioned 10-foot belt-drive T-rail
  • This “T-rail” can be converted to stronger “I-rail” with Nice/Linear’s bolt-on Carriage House Conversion Kit CHCR-10.
CBG24DCGMC

LiftMaster Techna Commercial DC Barrier Gate Operator White Cabinet

  • 24VDC barrier gate operator with battery backup
  • Continuous-duty motor with soft start/stop
  • Exceptional starting torque and continuous operation
  • Heavy-duty motor supports 6000 cycles per day
  • Operator speed of 2.5 seconds to open or close
  • Aluminum alloy chassis
    • .......more details
Installation Manual SellSheetData SheetWiring Diagram Quick Start Guide
BOARD076R

Manaras Replacement Power Board

  • Used on all Manaras circuit board type operators
K94-36408-2

LiftMaster Reset Switch LA400 with ID Resistor

  • For use with LiftMaster LA400 Series swing gate operators
  • Includes ID resistor kit
  • Includes LA400 product ID
MOTOR383

Manaras Electric Motor 2 HP 208/480V 3Ph

  • Continuous duty C-flange ODP 60Hz
108207

Fasteners Self Drill & Tap Tek Screw 5/16-12 x 1" 100/Bag

  • Indented Hex Washer Head
  • 7/16" Head
  • Max RPM = 2000
MK-00032

Micanan Transformer 460V-24V-40VA

172845

Disconnect Chain Hoist Wall Mount 4:1 Torque Force

  • Wall mounting
  • 4:1 reduction
  • Maximum pull allowed on hand chain is 35lb
  • Includes (1) 41B36 sprocket with 1” bore 4’ of #41 roller chain 26’ of hand chain (1) chain keeper (2) set screws 5/16"-18 and limit switch
Sell sheet
K10-33850

LiftMaster E-Box Cover MH MJ MT

CAPCELL

LiftMaster Cellular 4G/LTE Modem with Wifi

  • Connect CAPXL and CAP2D Anywhere: compatible with SIM cards from most carriers.
  • Sign up with your preferred carrier or add on to your current plan.
  • Avoid trenching and wire pulling for speedy installations.
  • Eliminate plain old telephone service (POTS) and improve reliability.
  • Compatibility: At&t® Verizon® T-mobile® Bell® Rogers™ Telus®
  • Capacity: Connect up to 4 wired or multiple Wi-Fi devices
    • .......more details
MM00015

Micanan Solenoid Lever Gearhead (MSI0031)

26CW14225-CUT

Truck Door Bottom Panel with Hardware (15" x Cut-To-Size) Painted White for Todco Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels are routed and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes with 18" pull strap assembly two bottom fixtures standard lift handle two cable anchor brackets seal and retainer.
    • .......more details
MK-00660

Micanan 1 Channel Hand Held Transmitter (for APT applications) Sold Individually

  • Sold in packs of 10. Priced per transmitter
STRUT-3-18'

Door Strut 3" Hemmed 18ft Long

  • Reinforcement bar 3"
CH100

Contact Cleaner and Lubricant 325g

  • Cleans both electrical and electronic parts.
  • Cleans dries and leaves a thin protective film.
  • 340g / 11.5 oz spray can
  • 12 cans per case
Safety data sheetFiche de données de sécurité
PRO-HHD-7511E-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft NM ECB No Eyes Left Hand

  • 3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Non-Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • Emergency chain hoist with electrical cut-off for manual operation
    • .......more details
Installation manualSpecification sheet
34101

Doorlec V-belt Pulley 9" x 5/8" bore

  • Fits model ETB-3
ULTRA-II-D-TEK

EMX Industries Plug-in Loop Detector (2663-1)

  • Features a slim design that is compatible with most gate operators that require a dry contact relay input.
  • No harness required; comes with terminal screw adaptor
  • ULTRAMETER™ (displays optimum sensitivity setting / diagnostic aid)
  • Frequency count/reset switch
  • 10 sensitivity settings
  • Loop diagnostics
    • .......more details
K72-12507

LiftMaster Clutch Shaft Kit (3/4 & 1HP)

  • Clutch Shaft Kit 3/4 & 1 HP Trolley operators
  • Complete with: Clutch Plate Clutch Shaft Bearing 3/4' I.D. Sprocket 41B10x3/4' 5L Belt Motor Pulley Spring Clutch Disk Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener
Installation manual
744

Fasteners Pan Head Tek Screw 3/4" long #8 Head 1000/Box

  • 8 x 3/4 Pan Socket Tek Zinc
MP-00044

Micanan Drive Chain #40 Modification for Trolley Operators 18' High Door In Lieu of #41

  • Chain modification when purchased with any of the following operators; PRO-T TB APT and GT
8030196

Marantec Belt Connector Kit

  • Works for all Marantec Belt Drive Openers
  • For models: Mac Lift M4500M4700Q7500Q7700 M4500e M4700e
  • Includes two connector pieces and four screws
  • Not for use on the heavy duty rails used by Q7900 & M4900e
B025

Rolling Steel Assembled Angles 2" x 2"x 3/16" Sold per Foot

  • Includes angles astragal and 1/2 slat
2JW-D064

Rolling Steel 2" Curved Cast Windlock

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
27024

Doorlec Electric Motor TEFC 3/4HP 115/230V DC403

  • ase mount
Wiring diagram for 120VWiring diagram for 230V
PED42

Pedestal Post 42" Gooseneck Pad Mount

  • Black powder coat finish
  • Faceplate with universal hole pattern to fit almost any access device
  • 2" x 2" square post
  • Neck is bent with 6 in. center radius giving a tight professional look
  • Same as G559
BK110/PR

Light Duty End Bearing Plate 3-3/8" with Bearing - EBF 338 Residential Sold as a Pair - LH/RH

  • With C16-32F bearing
  • Galvanized steel
  • 3-3/8" shaft offset
  • Flange allows plate to be bolted to the wall for additional support
  • Same as part number 209
GRD-2

Linear 2-Channel Delta3 Gate Receiver 310 MHz (DNR00102)

  • Auto voltage sensing - no jumpers to set
  • Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 128 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
975LMC

LiftMaster Laser Parking Assist ** To extent of inventory

  • Works with Chamberlain (LiftMaster) Garage Door Openers
  • Easily connects with two wires to the photocell terminals of the opener
  • The Laser light turns on as you drive into the garage
  • Simply Adjust the light to a specific spot on the dash
Installation ManualManuel d'Installation
71-B240

LiftMaster Interior Mount Brake Assembly 230-460V

  • Assembly includes: Brake Hub Kit Brake Release Lever Brake Disk Spring Cup Studs Compression Springs Brake Solenoid Solenoid Cover Spacers Mounting Plate Pressure Plate Feather Key Conduit.
  • Works on LiftMaster trolley garage door openers
Instruction Manual
27-24403

Truck Door Dual Torsion Spring Assembly 93/35 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 93" Spring Length: 35" Wire diameter: .187 Winding cone color: White
HD8460-200

T-Handle Cable Lock System 2"

  • Complete cable locking system for a 2" door.
  • System includes: Auto Latch Striker Keeper T-Handle keyed with 4-1/4" shaft Inside release handle 3/32" cable and all required hardware.
  • Also works for for 1-3/4" doors
25-10102

Truck Door 2" Steel Roller 3" Shaft for Whiting Roll-Up Doors

  • Zinc plated shaft 10 roller ball design
  • Shaft Length: 3" Overall Length: 3.75"
  • Cross Reference: W #2996 T #70224
44-60-240

Extension Spring 10' Door - 240 lbs Silver ** By Quote Only

  • Clipped ends
  • 44" long 60" stretch 240 lb load
1086090001.S

Overhead Drive Gear for Overhead 556

  • White plastic gear only for Overhead model 556
EP2983-BLACK

Exhaust Port 4" non latching long barrel Black Nylon

  • Inside diameter: 4"
  • Outide diameter: 4-3/8"
  • Sleeve: 2" (non latching)
  • Flange: 6"
  • Includes fasteners
  • Black Nylon
    • .......more details
JHDC12S4BMC

LiftMaster MAXUM Jackshaft 3/4HP 480V 3PH DC Operator 30 Cycles/Hour 1200LB

  • New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
  • Drive Type 65:1 Gearbox with #50 Chain Output
  • Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls
    • .......more details
D-TEK-LP

EMX Industries Low Voltage 11-Pin Single Channel - Dual Relay Loop Detector (2500-1)

  • Power Supply: 12-24 Volts AC/DC
  • Current Consumption: < 9 mA
  • Operating Temp: -40°F to 180°F
  • Surge Protection: Zener Diode /MOV
  • Output Relays (2): 1Amp 30 VDC
  • Loop Input: Transformer isolation lightning and transient protection (1)
    • .......more details
Manual - LP-D-TEKSpec Sheet - LP-D-TEK
CP35

Roller Chain Puller 35-60

  • Allows chain to be pulled together for attachment of the master link
  • For 35 thru 60 chain
837LM

LiftMaster MyQ Smart LED Garage Light Sec+ 2.0

  • 1000 Lumens of LED illumination provide a bright maintenance-free glow.
  • Unique compact design allows for placement where you need it.
  • Easy to Install. Conveniently plugs into a standard outlet and mounts on the wall or ceiling.
  • Control and schedule your LED light from anywhere with the myQ app. Requires a LiftMaster® or Chamberlain® garage door opener with myQ technology Smart Garage® Control or myQ Internet Gateway.
  • Acts as a garage door opener light (works with Alert-to-Close and Motion Control) when paired to your garage door opener.
  • Turn lights on and off with the myQ App or your garage remote.
    • .......more details
837LM Manual (EN/FR)
JHDC12X1BMC

LiftMaster MAXUM Jackshaft 3/4HP 120/240V 1PH DC Operator 60 Cycles/Hour 1200LB

  • DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
  • Drive Type 65:1 Gearbox with #50 Chain Output
  • Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls
    • .......more details
JHDC_Installation-manualJHDC_Manuel-installationData sheetFiche techniqueQuick connect guideGuide de connexion rapideOrdering guideSprocket recommendation
Q123

LiftMaster Electric Motor 12VDC K20-9012B-1

  • For use with various LiftMaster® Slide and Swing Gate Commercial Door Operators
K093A0763

LiftMaster Rear Housing KPW5 KPW250

  • This is a replacement Rear Housing KPW5 KPW250.
  • For use with various LiftMaster® Wireless Keypad Entry Systems
BCSI-PM504

Pivin Drapeau Limit Shaft Kit BCSI Gate Operator ** Price by Quote Only

  • Includes: Switch Shaft Bearing Plate
FAAC-844-115V

FAAC 844 Slide Gate Operator 115V

  • The FAAC Model 844 automated system for sliding gates is an electro-mechanical operator transmitting motion to the sliding leaf via a rack or chain pinion appropriately coupled to the gate
  • The non-reversing system ensures the gate is mechanically locked when the motor is not operating and therefore no lock needs to be installed
  • Control Board: model 780D
Q032

LiftMaster Limit Nut (K75-50101)

  • For models: SL3000 SL3000ULE ROBO SLIDE
RLC-K72

Miller Edge Light Curtain Non- Monitored 6ft

  • Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
  • Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
  • Ideal for pre-2010 installations not requiring a monitored solution.
  • Ability to span up to 32' wide
  • Universal mounting brackets included
  • IP67 waterproof housing
    • .......more details
Installation manualsell sheet
GAREX-W/STRIP

Garex Weatherstrip Special Order

  • specify size color details when ordering
  • Please call for pricing
BK009

Commercial Top Bracket Adjustable 1-Bolt Tall Sold per Piece

  • Zinc plated
  • 12 gauge roller carrier and base plate
25-60006

Truck Door T-Style Replacement Hardware Pkg Set**To Extent of Inventory

  • Package set consists of (2) 1" door rollers (2) T-style end hinges (2) T-style center hinges and 16 nuts 16 washers & 16 bolts
  • Zinc plated
Z9202

E-Z Ratch Kit Torsion Spring Winding System ** No Longer Available

  • Kit includes:
  • Two (2) - 21" Extendable Ratchet Handles (extend to a full 30" in length)
  • All-purpose commercial cone Gear Adapter (double-ended)
  • Six (6) Cone Adapter Pins One (1) 7/16" One (1) 1/2" Two (2) 5/8" Two (2) 3/4"
  • Mounting arm spacing allows it to be coupled to spring cone sizes up to 4 3/4" diameter
  • Compatible with 1” main torsion bar installations
    • .......more details
Operating instructions
LA412XL20W

LiftMaster Single Arm Solar Package for LA412DC XL Gate Operator UL325 ***Includes (1x) K94-37236 Solar Harness (1x) SP20W12V Solar Panel (1x) LMRRUL Photo Eye (1x) A12330SGLPK Battery (12V) (1x) LA412DC Actuator Arm (1x) XLSOLARCONTUL Control Box

  • Access your property like never before. With MyQ® Technology you can monitor and control your gate from anywhere and get in quickly and securely with the built-in interference eliminating Security+ 2.0® radio.
  • Heavy-Duty Cast Aluminum Housing DC Motor powerful enough to perform in the most demanding applications.
  • Soft start/stop operation extends operator and hardware life for heavy-duty gate use.
  • Gate Size rated for gates up to 16 ft. in length or weighing up to 850 lbs.
  • Includes: Single arm control box solar harness kit solar panel kit 12V 20W LMRRU photoeye and battery 12V 33 Ah.
  • Item codes: XLSOLARCONTUL SP20W12V LMRRUL LA412DC K94-37236 A12330SGLPK
    • .......more details
RB709U-NB

Linear GTO Garage Door Receiver Adapter Mighty Mule

  • The RB709 Garage Door Opener Adapter enables the Mighty Mule transmitters to open and close almost any garage door opener
  • Made to be used with the FM134 (two button) and the RB743 (three button) remote control transmitters or F310 Keypad
  • Easy to install with almost any garage door opener
  • One RB709 is needed for each garage door opener that will be controlled by the Mighty Mule transmitters
BCSI-BM-31

Disconnect Lever Industrial Slide Gate Operator ** Please use BCSI-PM31

SPRAY-265

Aluminum Touch Up Spray Paint Antique Brown / Brun Antique #265/165 *** To Extent of Inventory

  • 140g
DM120-125-T/FORCE

Cable Drum High Lift 120" D575-120-1-1/4" Pair Torque Force

  • 120" High Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
  • Maximum high lift: 120".
  • Maximum door height: 144" + High Lift.
  • Rated lift per drum: 500 lbs.
    • .......more details
40-3505

LiftMaster Gate Warning Sign Plastic English

DXSR-1504

Linear Supervised 4-Channel Reciever ***No Longer Available

  • Dual diversity superheterodyne receivers
  • Compatible with DX and DXS transmitters
  • Measured line-of-sight range of 1500 Feet
  • Quick-learn programming
  • Selectable supervision
  • Individual outputs per RF channel for alarm low battery and status trouble reports
    • .......more details
TRACK-2"-RAW-9

Raw Vertical Track 2" 9'-0" Sold per Piece

60-2439

Allen Bradley Swivel / Tilt Mounting Bracket ***To Extent of Inventory

  • For 9000 series photo switches
19863R

Genie Clip and Collar Rail Connectors

  • For Genie screw drive units having split rails use a collar and spring clip to join the 3-piece screw.
  • Complete collar and clip set for one 3-piece rail.
  • Compatible with all screw drive Genie garage door openers
  • Set of 2 clips and 2 collars
  • Same as 19806A04 and 19807A04