Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
20449R

Genie Chain Glide Rear Housing Cover

  • Compatible with models: PCG400 PCG450 PCG500ML PCG600 PCG700ML PCG700FN GCG350L GCG350ML H2000C 1020L 2020L
  • Contains gear housing cover only
CA-151-412

Continuous Angle 1-1/2" x 4-1/2" x 151.5" L Sold per Piece

  • 12-ga angle
ME00006

Micanan Intermediary Shaft 1" x 10-7/16" c/w KW

192417

Torque Force Pocket Guide 3.5" x 5" 195307

  • Imperial multiplier
  • Features: Drum specs Plugs specs Manual counterbalancing calculation Spring charts
CP-SH-34-12

Lynx Clutch/Drive Shaft Assembly No Pulley

  • For trolley operator
106141

Marantec Shaft Adapter

2704.135.140

Whiting Roadside Torsion Spring 2-3/16" ID 14" Long

  • Torsion spring wire only
  • .135 wire size
10TD900INDHH3

BEA 3-Button Digital Transmitter Nema 4 900 MHz

  • Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
  • It also provides better penetration of obstacles.
  • IP65
  • Operating temperature: -10 to 55C
  • Controls one 10RD900 receiver
Product guide
541.3224.00

Whiting Outside Cam Lock w/Inside Release

  • An upcharge when ordering a Whiting door #3224 #77 & #7535.2-TG
STRUT-3-30'

Door Strut 3" Hemmed 30ft Long

  • Reinforcement bar 3"
.289_3-3/4"-RH

Torsion Spring .289 x 3-3/4" x 12ft RH

  • Wire size: .289
  • Inside diameter: 3-3/4"
  • Length: 12 ft
M-0131

Autogate Proximity (Limit) Switch

.192_2-3/16_60R

Spring Wire .192 x 2.188 x 60" CTD RAW RH

  • .192 x 2-3/16" x 12'
.192_2-3/16_60L

Truck Door .192 x 2.188 x 60 CTD RAW LHW

  • .192 x 2-3/16 x 12'
HSC-BOLT-3002

Replacement Center Bolt for HSC-600 Swager Sold Individually

  • Replacement bolt only (1)
02-406-2

LiftMaster Key Set Qty 2

  • Replacement Key ONLY for 02-406 2006-2015 #1 or #1502M
.25W8.2

Resistor 1/4 W 8.2K OHM

  • Dimensions (W X H X L) 6 X 15 X 3 CM
41D0216-2

LiftMaster End Panel with Light Socket

  • Compatible with LiftMaster® 8550WL & 8360WL Models; and various garage door openers manufactured after 2017 only
  • Circuit board not included
CA-104-312

Continuous Angle 1-1/2" x 3-1/2" x 104" L Sold per Piece *** NLA

  • 12-ga angle
P-0128/LH

Autogate Retro Bracket Left Handed System

  • This is needed to change over to their current motor
21001

Limit Switch Micro

HSLG-123

Linear Commercial Slide Gate Operator 1 HP 230V 3 Ph - Heater not Included

  • Max duty cycle: Continuous
  • Integral APeX Controller
  • Double V-belt to chain reduction
  • #40 roller chain
  • Emergency manual disconnect handle
  • Powder coat finish
    • .......more details
60-6550-A-BLK

Speed Bump Black 36" Econo Light Weight for Asphalt *** NLA

  • A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
  • Main pieces may be added and connected to form larger units.
  • 36” long x 10.5” wide x 2” high (main piece)
  • EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
  • Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
  • Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.
    • .......more details
60-6550-C-BLK

Speed Bump Black 36" Econo Light Weight for Concrete ***NLA

  • A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
  • Main pieces may be added and connected to form larger units.
  • 36” long x 10.5” wide x 2” high (main piece)
  • EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
  • Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
  • Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.
    • .......more details
103-T-8X10-VL

Hardware Set 3" Industrial 103-T for 8' x 10' VL

  • A variety of options and sizes are available call for quote
  • Set includes tracks HD rollers hinges solid shaft drums cables springs and struts if applicable.
CB1805000-KOR

Cable 1/8" 7x19 5000' Galvanized Supreme ** Price on request

  • Galvanized Cable 1/8" 7x19 5000ft spool.
  • Cable break strength: 2000 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Stainless Steel Cable Specifications
JB-02

Miller Edge Junction Box Metal

  • For commercial overhead doors that use coil cords or retracting reels
  • Standard metal junction box with cover
  • Includes 1 x 90-degree connector 1 straight connector
  • Includes strain relief + 2 wire nuts + pop-out holes
  • For single-angle bottom bar of rolling steel door
  • Also compatible with sectional door
    • .......more details
10.1063.9

Whiting S.S Serrated Flange Lock Nut 1/4-20

10.1003.150

Whiting Step Bolt Stainless Steel 1-3/8"

M-0319

Autogate Groschopp Inline Motor 24V

CBC532-SS

Thimble 5/32" Stainless Steel Sold Individually

MV00210

Micanan Banner Reflector 3"

  • Compatible with Banner #MV-00300 reflective photocell
2650-115-12

Linear HSLG #40 Chain 46 Feet

  • Purchased in conjunction with a gate opener
MM00026

Micanan Cut-Out Sw. Activation Plate Gearhead (MSI0042)

7001-12-ANODIZED

Commercial Side & Top Weather-Strip 12' Long - Anodized 7001-AB

  • Anodized galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-10-ANODIZED

Commercial Side & Top Weather-Strip 10' Long - Anodized 7001-AB

  • Anodized galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-7-D/TAN

Commercial Side & Top Weather-Strip 7' Long - Desert Tan 7001-DT

  • Desert tan galvanized steel with desert tan dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (20)
PRO-GH-15011U-RH

Micanan 1.5 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
CP100C

Coupler Specialty Coated 1" Bore

  • Coated with 1000 plus hr salt spray rated finish
  • 1" Bore with 1/4" keyway
  • Malleable iron for high strength and resistance to shock loading
  • Coupler halves separates and is adjustable
  • 4-(3/8"-16 x 1" square head set screws installed
  • Rust inhibitor coating
    • .......more details
7206

Whiting Balancer Bracket End - Curbside for Whiting Roll-Up Doors for #7176 Balancer

  • Steel construction
  • Plain finish
  • Whiting original
2523

Whiting Balancer Bracket End - Curbside for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Cross Reference: W # 2523 for # 2376 balancer
K30-205-E

LiftMaster Boot Red

  • Also known as: 30-205-E 30205E
  • Replacement button cover for 02-406 station
BPPB17524

Garex Bottom PVC Moulding White for 1 3/4" Door U shaped 289"(24')

K20-1100-1T

LiftMaster Electric Motor 1/2 HP 115V 1Ph TEFC **DISCONTINUED

  • Compatible with LiftMaster® Model SW490GL Swing Gate Operators
  • Also known as: 20-1100-1T 2011001T G2011001T
GHX-6432-CONT-LH

Manaras Explosion Proof Gear Head 1/2HP 480V-3P Contactor Left Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station
H8NA12

Richards-Wilcox Hinge 8NA x 12 Gauge Roller Bracket

  • Galvanized 12 gauge hinge
HINGE-1214-PCG

Powdercoated Hinge #1/2 x 14 gauge Grey ** To Extent of Inventory

  • Heavy Duty 14 gauge offset hinge #1/2
  • Powdercoated Grey
AM-DPR

Linear Dual Proximity Reader

  • Compatible with most Wiegand formats up to 40 bits
  • Weather resistant and vandal resistant
  • 4 to 6 inch read range
  • Supports up to 65000 cards
  • Easy to install
  • Integral LED confirms when user access is granted
    • .......more details
CPT-223-50

Miller Edge Bulk Extrusion 50' roll

  • For DIY quick fixes to repair or replace sensing edges for sectional and rolling steel doors measuring 1-1/2" to 2" thick with a mounting channel.
  • Sensivity: 15lbs max activation
  • Lead wire 18"-22 gauge unversal
  • Wire configuration: N.O.
  • Electrical interface: sealed module- provides seamless connection to logic or relay type operators
  • ANSI/UL325 recognized component
    • .......more details
A22KITSKB

Erone Web-Based IP 2-Door Controller SOLARKPB Kit

  • Atrium 2-Door Controller Kit Web Based IP Hybrid
  • Module Embedded Web Server Includes 2 SOLAR Keypad/Reader 15 Credential Software
  • Pre-assembled universal plug-in power supply (120V/240V) included
  • Convert any A22 door controller to an A22EC elevator controller by simply updating the firmware for free (up to 256 floors)
  • On-board Ethernet Port with AES 256-bit encryption
  • Auto-detect hardware modules Quick and easy card enrollment procedure
    • .......more details
Wireless System Chart
K20-1150C-2P

LiftMaster Electric Motor 1-1/2 HP 115/230V 1Ph TEFC

  • Replacement electric motor for SL595-15021 and SL595-15011 models
SF514-S

Spring Fitting 5-1/4" Stationary Side Only for 1" & 1-1/4" shaft

  • Can be used with either 1" or 1-1/4" winding cones
  • Includes: (1) stationary side only.
  • 2 x 3/8-16 thread holes at CC=4.25"
SF514U-114-W

Spring Fitting 5-1/4" Winding Side Only for 1-1/4" shaft

  • Universal thread for use in either LH or RH wound springs.
  • Includes: (1) winding side only
4JW-LEFT

Rolling Steel 3" Curved Cast Windlock 273002 LH

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
K75-37549

LiftMaster Disconnect Kit for SL595U

  • Compatible with LiftMaster SL595UL heavy-duty vehicular slide gate operators
  • Allows manual operation of your gate operator
2500-2347

Linear Limit Switch SPDT Omron D2VW

STATION082

Manaras Push Button Control Station 2-Button Nema 4/12

  • 2-button 2 N/O contact
  • Plastic
G3243

GDI Battery Backup Option G3243

  • BBU option if AC power is lost
H14G04-BLACK

Hinge #4 x 14 gauge Black Powder Coated

  • Black powder coated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • Individually wrapped
H14G03-BLACK

Hinge #3 x 14 gauge Black Powder Coated

  • Black powder coated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • Individually wrapped
H14G01-BLACK

Hinge #1 x 14 gauge Black Powder Coated

  • Black powder coated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • Individually wrapped
GBU312EF-1

Gate Roller 3-1/2" x 2-3/8" Galvanized Sold Individually

  • Galvanized gate roller with bracket for 3-1/2" upright post
  • Works with gate pipes that are 2-3/8" thick or less
E/BLOP/151

Automatic Systems Safety Edge for BL229 16'-5"

22010-UNCUT-KEY

Doorlec Un-Cut Key for 22010 Sold Each

2100-564

Linear Clutch Disk Facing HSL HSLG

SF375-W

Spring Fitting 3-3/4" Winding Side Only

  • Universal thread for use in either LH or RH wound springs.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
  • Winding bar hole 5/8"
GAL.262-258-144L

delete

SPRING001

Manaras Cam Guide Plate Spring

111396.0004

Overhead Brake Kit Model H 1/2HP 1PH

Installation instructions
2376.177*26.960

Whiting Torsion assembly .177 wire size 26" spring length 96" shaft

218-45-10

PVC Connector for 3/4" - 3/32" RAH

P-75

End Plug for 3/4" ID Rubber Hose

  • Sold per plug
12576

Doorlec Clutch Disc Fiber 4" dia.x 1" bore

  • Fits model ETBHW/ETHW
BCSI-PM10

Pivin Drapeau Clutch Plate for BCSI Gate Operator ** Price by Quote Only

  • Friction Plate
MK01428

Micanan Digital Countdown Timer

  • DC-Digital
50442

Doorlec Mushroom Push-Button Red for 1-Door

  • Capable of opening one door
  • NEMA 4 Enclosure
10.1002.3

Truck Door Rivet with Splines 1/4" x 1" Steel

  • Mild steel construction
  • Round head design 3/4" head
  • Standard hinge rivet
10.1002.23

Truck Door Rivet with Splines 1/4" x 1-1/32" Stainless Steel

  • Stainless steel construction
  • Round head design 11/16" head
RELAY026

Manaras Relay DPDT 120VAC

CAM017

Manaras Synthetic Disconnect Cam Opera

SSZP8-6-114

Solid Shaft 1-1/4" Keyed Zinc Plated 8'-6"

CP-PU-DRV-58-8

Lynx Drive Pulley 5/8" x 8" 4L MR TC3 Open/Spoke Style for Trolley Ops

CP-CLUTCH-D-58

Lynx Clutch Disk 5/8"

CP-CLH-58

Lynx Clutch Hub 5/8"

CP-PU-DRV-78-8

Lynx Drive Pulley 7/8" x 8" 4L for Jackshaft Ops

SS-STRUT-16

Strut Stainless Steel 2-1/2" x 16ft 16-Ga

SS-STRUT-10

Strut Stainless Steel 2-1/2" x 10ft 16-Ga

37380

Doorlec Auxiliary Contacts BF9 Contactor

MA011

LiftMaster Magnet

  • Mega Arm Steel Magnet Assembly for Cam Arm
MP00227

Micanan Track and #41 Waterproof Chain for 12' h Door

PS12D2A

LiftMaster Passport Power Supply Plug-In 12VDC 2A (02A1699-1/ ST122A)

  • Same as #002A1699-1
MOUNTSHAFT018E

Manaras Limit Shaft Kit For Damp/Corrosive Env.

  • For operators with W or C Modification
CAP425

Capacitor 125VAC 425MFD

  • Motor Start Capacitor 125V 425 MFD
41D9202

LiftMaster End Panel Driver Board ** Discontinued

  • 041D9202 is a Front End Panel with LED Light Connector/Driver Board Replacement Kit.
  • For use with LiftMaster® and Chamberlain® Residential Garage Door Openers; manufactured after 2018.
  • Compatible with the WLED model
CB31605000-KOR

Cable 3/16" 7x19 5000' Galvanized Supreme ** Price on request

  • Galvanized cable 3/16" 7x19 5000ft spool.
  • Cable break strength: 4200 lbs
  • A higher quality cable compared to the Chinese cable
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Stainless Steel Cable Specifications
K75-10406

LiftMaster Drive Chain Connector Link Kit APT

  • Also known as: 30515363 305105363
14-1014

PVC Roll 8" x .072 Standard Clear Ribbed 150' for Replacement Strip Curtain

  • Suitable for most average applications.
  • Temperature Range: -20°F to 150°F (-28° C to 66° C).
  • Formulated with ingredients that meet USDA requirements for incidental food contact.
  • Ribbed grade – for greater abrasion resistance and longer lasting clarity
2705.148_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

  • Most common torsion spring for cube trucks
  • Specs: .148 x 2-3/16" x 18" Long
  • For Roadside order part # 2704.148*180
2704.148_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

  • Most common torsion spring for cube trucks
  • Specs: .148 x 2-3/16" x 18" Long
  • For Curbside order part # 2705.148*180
31103

Doorlec Sprocket 41B36. KW/SS 1"