Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
K11-8061

LiftMaster Main Shaft (1)

  • Also known as: 11-8061 118061 G118061
  • For use with various LiftMaster® Commercial Gate and Barrier Gate Operators
K41-0259-000

LiftMaster Chain Guard IHSL/ INSL24UL

K77-10473

LiftMaster Hardware Kit SD GSD

  • Also known as: 305PBSDGSD
  • Replacement Single Slide Door Hardware Kit.
  • Compatible with LiftMaster® Models SD and GSD Commercial Door Operators
111031.0001.S

Overhead Door Link Hoist Release RSX

  • Hoist link for the Overhead Door RSX (rolling steel - hoist) commercial operator
2376.182.275.930

Whiting Torsion assembly .182 wire size 27-1/2" spring length 93" shaft ** price by quote only

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
61390.3072

Todco Original Side Seal Reefer Cut to Size ** Special Order Item Price by Quote Only

  • Fits Serial #30662431-1
O22R1104

AirLift Fitting Straight 3/8 x 1/8 NPT

10.1002.9

Truck Door Rivet Mild Steel 1/4 x 1-5/16 - 1/2 HD Sold per Unit

  • Standard rivet used for installing #77 lock
  • 5 rivets are required to install the handle Sold separately
K1D8059-1CC

LiftMaster Main Control Board with Heat Sink

  • This is a Pre-UL2016 Seven Segment Main Control Board with Heat Sink.
  • Compatible with LiftMaster® Models CSL24VDC CSW24VDC RSL12VDC and RSW12VDC Pad Mount Gate Operators.
  • Complete replacement kit includes: logic board adapter harness and installation hardware.
510.8000.00

Whiting Option for Short Panel Stack Up DF Door

  • This is an upcharge when ordering dry freight doors
  • Shorter panels move thru the radius of the track smoother
EHJ-343-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 460V-3Ph

  • Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
75-12362

LiftMaster Adaptor Plate with Fasteners

  • Also known as: 7512362 K75-12362
P40-10PFO

Hand Crank Reducer 107174

K75-30737

LiftMaster Disconnect Kit for GH

  • Disconnect Kit Complete with: Disconnect Lever Bevel Gear Yoke Brake Release Actuator Bracket Switch Actuator Disconnect Shaft Tension Spring Sash Chain with Keyring Screws Nuts Flat Washers Lock Washers Cotter Pins and Roll Pin.
  • Compatible with LiftMaster® Model GH Commercial Door Operators.
O22R1002

AirLift Airline 3/8" Sold per Foot

K86-RP10-208

LiftMaster Roll Pin 5/16" x 2-1/2"

  • Also known as: G86RP10208 86RP10208 86-RP10-208
684-33-104-A

Universal Bracket 2.25" x 2.5" x 12" w/1" x 12" Plate

.262_6"-LH

Torsion Spring .262 x 6" x 12ft LH Red/Yellow

  • Wire size: .262
  • Inside diameter: 6"
  • Length: 12 ft
  • Special Order Minimum lead time 3 weeks
K77-37856

LiftMaster Front Cover Grey RSW12U CSL/CSW24U

  • Front cover only
  • HEIGHT: 18-1/4 Inches
  • WIDTH: 15 Inches
  • DEPTH: 13 Inches
10.1063.9

Whiting S.S Serrated Flange Lock Nut 1/4-20

10.1003.150

Whiting Step Bolt Stainless Steel 1-3/8"

PRO-PL-7553U

Micanan Wall Mount Control Panel 3/4HP 575V Monitored ECB

  • If PBS on cover required an additional charge will apply
  • If panel not ordered with an operator an additional charge will apply
  • Id fusible disconnect required additional charges will apply
K72-13912

LiftMaster Clutch Shaft Kit T GH

2705.148_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

  • Most common torsion spring for cube trucks
  • Specs: .148 x 2-3/16" x 18" Long
  • For Roadside order part # 2704.148*180
CM30E

Push-to-Exit Button Green

.343-514-R-C

Cut-to-Length Torsion Spring .343 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-525-INSTALLED
  • If cones are required a filler must be added use part # FILLER
.283-334-L-C

Cut-to-Length Torsion Spring .283 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.262-134-L-C

Cut-to-Length Torsion Spring .262 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
2807.148.180

Whiting .148 x 2-3/16 x 18" Curbside with Cones

PRO-GH-5043U-R

Micanan 1/2HP 460V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
2705.206_325

Whiting Curbside Torsion Spring 2-3/16" ID 32-1/2" Long

  • Torsion spring wire only
  • .206 wire size
PRO-H-5023-U-RH

Micanan 1/2HP 230V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
  • On-Board receiver holds up to 20 transmitters
MK-00703

Micanan Harness 1-Phase 5-Relay Board

PRO-J-10083-U-RH

Micanan 1HP 208V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
PRO-J-7511-U-RH

Micanan 3/4HP 115V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
LB1210-36

Laminated Bumper Standard Black 10" x 36" 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TVB636-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 36" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
.207-3-9-RHW

Mini Storage Spring .207 x 3" x 9" long Right Hand

AC636

Aluminium Threshold AC6 x 36" (3')

K10-36183

LiftMaster Battery Tray for 33AH Batteries

  • For use with LA500
2376.171_25.930

Whiting Torsion assembly .171 wire size 25" spring length 93" shaft

.207-3-8.25-RHW

Mini Storage Spring .207 x 3" x 8.25" long Right Hand

.207-3-8.25-LHW

Mini Storage Spring .207 x 3" x 8.25" long Left Hand

V5001-DARK-OAK

Replacement Vinyl Only for 5001-DOD Sold per Foot

2376.177_27.830

Whiting Torsion assembly .177 wire size 27" spring length 83" shaft

126474-7K

Spring Failure Device For 1" Shaft RH & LH Assembly

  • Designed to reduce the risk of the door falling in the event of spring breakage
  • 3-3/8" offset between wall and shaft (separate extension bracket available for offset of 4-3/8" up to 6")
  • For 1" shaft (1-1/4" shaft available for special order)
  • Fits 1-3/4"-6" Torsion Springs
  • One device per spring is required
  • Not for use with duplex springs
    • .......more details
2807.148.140

Whiting .148 x 2-3/16 x 14" Curbside with Cones

2376.156.17.770

Whiting Torsion assembly .156 wire size 17" spring length 77" shaft

AW12K500-12

Miller Edge Air Wave Kit 12ft No Coil Cord**Discontinued

  • Kit Includes: AW12 Air Wave Switch Barbed Coupler (12') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs
2376.177_27.850

Whiting Torsion assembly .177 wire size 27" spring length 85" shaft

DT3+1

Linear 3+1 Channel Transmitter 310 MHz

  • Activates one GRD gate receiver and up to three separate Delta-3 receivers
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 independent codes for gate + 64 multi-channel codes for doors (set by dip switches)
  • Frequency: 310 MHz
    • .......more details
Programming Instructions
2807.156.195

Whiting .156 x 2-3/16 x 19.5" Curbside with Cones

K20-1050B-1RL

LiftMaster Electric Motor 1/2 HP 115V 1Ph BM

  • 1/2HP 115V 1 PH resilient base mount motor with one drive shaft key.
  • Check the manual for your specific model number before ordering to ensure compatibility.
5-30-6

3" Vertical Track 12-GA 11'-4" (12' door) Sold per Pair

  • Pierced track
EH5761-A19

Automatic Systems Round Arm Assembly BL27 14'-9 (4.5M)

  • French description: Ensemble Lisse Ronde 4.5m (14'-9")
  • For model BL27 gate operator
K72-33873

LiftMaster Output Shaft Kit MT / BMT

  • Complete kit includes output shaft bearings sprockets chain roll pin and turac
15-50B35QGH

Sprocket 50B35 1-1/4" Bore 1/4" Keyway

8086.225.325

Whiting .225 x 2-5/8 IN x 32-1/2" Roadside with Cones

  • An original Whiting assembly
8087.225.325

Whiting .225 x 2-5/8 IN x 32-1/2" Curbside with Cones

  • An original Whiting assembly
7001-WG-8-DO

Residential Wood Grain Side & Top W/S Dark Oak 8' Long - Painted Screws to Match

  • Dark Oak retainer with Dark Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
7001-WG-8-CO

Residential Wood Grain Side & Top W/S Cherry Oak 8' Long - Painted Screws to Match

  • Cherry Oak retainer with Cherry Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
42-8116-1

LiftMaster Terminal Block 16-Position

11-10987

LiftMaster Clutch Shaft for MH

.312-3-3/4-RH-C

Torsion Spring .312 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 3-3/4" Length: 12 ft
.312-3-3/4-LH-C

Torsion Spring .312 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 3-3/4" Length: 12 ft
.273-2-5/8-LH-C

Torsion Spring .273 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .273 ID: 2-5/8" Length: 12 ft
.207-2-5/8-LH-C

Torsion Spring .207 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .207 ID: 2-5/8" Length: 12 ft
OGH-6233-ECB

Manaras 3/4 HP 208V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
OMJ-6112-ECB

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
Installation ManualSell Sheet
K75-19985

LiftMaster Clutch Pulley Assembly

  • Fits model H operator with Logic 5
2704.177_270

Whiting Roadside Torsion Spring 2-3/16" ID 27" Long

  • Torsion spring wire only
  • .177 wire size
41A5624-8

LiftMaster DC Passpoint Assembly

  • Travel Module for 3850
86-CP05-108

LiftMaster Cotter Pin 5/32" x 1-1/2"

2807.139*140

Whiting Spring Assby .139 x 2-3/16 x 14" L Curbside

  • Replacement torsion spring with cones for Whiting Door Serial # 138631
  • Specs: .139 x 2-3/16" x 14" Long
  • Curbside
  • For Roadside order part #2806.139*140
.393_6"-LH

Torsion Spring .393 x 6" x 12ft LH Orange

  • Wire size: .393
  • Inside diameter: 6"
  • Length: 12 ft
.312_6"-LH

Torsion Spring .312 x 6" x 12ft LH Yellow

  • Wire size: .312
  • Inside diameter: 6"
  • Length: 12 ft
.273_2-5/8"-LH

Torsion Spring .273 x 2-5/8" x 12ft LH Orange/Red

  • Wire size: .273
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.262_2-5/8"-LH

Torsion Spring .262 x 2-5/8" x 12ft LH Red/Yellow

  • Wire size: .262
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.295_1-3/4"-LH

Torsion Spring .295 x 1-3/4" x 12ft LH Blue

  • Wire size: .295
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.243_1-3/4"-LH

Torsion Spring .243 x 1-3/4" x 12ft LH White/Yellow

  • Wire size: .243
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.312_3-3/4"-RH

Torsion Spring .312 x 3-3/4" x 12ft RHW Yellow

  • Wire size: .312
  • Inside diameter: 3-3/4"
  • Length: 12 ft
2705.162_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long Galvanized

  • Most common torsion spring for cube trucks
  • Specs: .162 x 2-3/16" x 18" Long
  • For Roadside order part # 2704.162*180
2235.296

Whiting Coldsaver Bottom Panel 14-1/2" x xxx" with lock seal and retainer (Max 96")

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick max 96" wide
  • Includes Lock and keeper
2237.096

Whiting Coldsaver Intermediate Panel 13-1/2" x 96"

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
2234.096

Whiting Coldsaver Bottom Panel 12-1/2" x Max 96" with seal and retainer ** Cut to Length

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
32-48-90

Extension Spring 8' Door - 90 lbs Light Blue ** check for availability

  • Double - Loop
  • 32" long 48" stretch 90 lb load
  • Springs sold individually
32-48-70

Extension Spring 8' Door - 70 lbs Orange ** check for availability

  • Double - Loop
  • 32" long 48" stretch 70 lb load
  • Springs sold individually
.234_1-3/4"-LH

Torsion Spring .234 x 1-3/4" x 12ft LH Blue/White

  • Wire size: .234
  • Inside diameter: 1-3/4"
  • Length: 12 ft
972LMC*

LiftMaster 2-btn Security+ Transmitter 390 MHz ***Discontinued

  • Both buttons feature Security+ rolling code technology
  • Compatible with models manufactured from 2005
  • Second button can learn other shared Liftmaster radio-controlled devices.
  • Includes visor clip and Lithium battery CR2032
.312_2-5/8"-LH

Torsion Spring .312 x 2-5/8" x 12ft LH Yellow

  • Wire size: .312
  • Inside diameter: 2-5/8"
  • Length: 12 ft
SSZP13-1

Solid Shaft 1" Keyed Zinc Plated 13'-1"

.306_2-5/8"-LH

Torsion Spring .306 x 2-5/8" x 12ft LH Red

  • Wire size: .306
  • Inside diameter: 2-5/8"
  • Length: 12 ft
8331.96

Whiting Brush Top Seal assembly 96"

  • Fits Coldsaver and Tempguard
.25W8.2

Resistor 1/4 W 8.2K OHM

  • Dimensions (W X H X L) 6 X 15 X 3 CM
.218_2-5/8"-LH

Torsion Spring .218 x 2-5/8" x 12ft LH Yellow/Orange

  • Wire size: .218
  • Inside diameter: 2-5/8"
  • Length: 12 ft
2806.177*230

Whiting Spring Assby .177 x 2-3/16 x 23" Roadside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 23" Long
  • Roadside
  • For Curbside order part # 2807.177*230
.363-334-L

Cut-to-Length Torsion Spring .362 x 3-3/4" Left Hand Wound Green/White

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-375-INSTALLED
99552NYHNG

Nylon Hinge Black #2 *** To extent of inventory

  • Equivalent to 14-ga in strength
1404-16FT-BLK-XL

Residential Side & Top PVC Weather-Strip with cap 16' Long - X-Wide Black

  • Extra Wide Profile 2-1/2" wide
  • Flexible co-extruded cap to hide screws
  • Dual Fin PVC that seals against the door
  • Material: Rigid PVC / Flexible PVC Co- Extruded
  • Colors: Black Brown Bronze Cream Sandstone White
  • Lengths: 7′ 8′ 9′ 10′ 12′ 16′ 18′
    • .......more details
77.2

Whiting Stainless Steel Outside Cam Lock