The OWL is a vehicle motion and presence sensor that uses microwave and infrared technology to activate automatic doors and industrial gates.
Featuring two configurable outputs vehicle motion detection as well as presence detection the OWL activation sensor will ensure the safety of people and goods.
Mounting Height: 11.5-21.3 ft (3.5-6.5 m)
Supply Voltage: 12-24 VDC/AC
Dimensions: 9” (229 mm) x 5” (127 mm) x 5” (127 mm)
Connections: 32 ft (10 m) 8 conductor cable directly from sensor
Front of Hood Mount for Rolling Steel Doors and Grilles.
Variable speed up to 12”/sec with smooth start/stop feature.
Floor level controls with intuitive menu driven interface.
Accepts: (30) 3-Button Remote Controls or (90) 1-Button Remote Controls
Accepts an additional 30 Wireless keypads and Unlimited Dip Switch remotes
Includes: 1 x Powerhead (with 16.5 ft. Integrated Hoist Chain) 1 x Controller 1 x Powerhead Mounting Bracket with Hardware 1 x VFD Cable (22 ft. Standard) 1 x Encoder Cable (22 ft. Standard) 1 x #50 Drive Chain 1 x 40-Tooth Sprocket 1 x LiftMaster Monitored Entrapment Protection (CPS-U Standard
This Genie chain drive bullet assembly is the white piece that holds the chain for the garage door opener together.
Works with chain model Genie garage door openers that have a C-Channel rail.
The chain carriage assembly for these models also attaches to this chain bullet assembly allowing it to move the garage door open and closed up and down the rail.
Assembly contains: The 2 Bullet side white pieces and the four screws to install it
Compatible with Genie models that have a chain rail: 1028 2028 3020H 3020H-B 3024 4024 3022 3042 3120H 3120H-B 4022 4042 4124 4164 (ChainMax ReliaG IntellG and TriloG series with these model numbers)
Aluminum Full View door - Factory frame and rail colours are Anodized White and Black - Custom colours can be factory painted - Multiple single pane or insulated glass styles are availavle such as clear tempered tinted frosted gluechip etc - Multiple hardware configurations are available to accomodate site requirements
R16 Insulation - Overlay moldings positioned to create the Godefroy design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
R16 Insulation - Narrow multi rib pattern - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
R16 Insulation - Mix of short and long panels - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - 7' to 9' wide doors will have 1 short and 1 long embossment - 10' to 11' wide doors will have 2 short and 1 long embossment - 12' to 18' wide doors will have 2 short and 2 long embossments - Composite end blocks eliminates corrosion and wood deterioation
Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates.
•3-sided activation allows for immediate stopping or reversing of motion
•Contours to round or square posts.
•Temperature range: -30F to 155F
•Lead wire: 18 gauge 2ft length
•Sensitivity: nominal 6-8 PSI
•2 wrie NO configuration
•ANSI/UL325 recognized component
•Cannot be bent
•One year warranty
Non-monitored edge
Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)
A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
Main pieces may be added and connected to form larger units.
36” long x 10.5” wide x 2” high (main piece)
EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.
Complete with: Clutch Plate Clutch Shaft Bearing Sprocket 5L Belt Motor Pulley Spring Clutch Disk Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener
Same as 308117101K 310115111 K7212589 K72-12589 71116121J
1 HP575V 3 PH Industrial Continuous Duty Jackshaft Operator
Ideal for Sectional Doors Rolling Steel
Non-Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included
Emergency chain hoist with electrical cut-off for manual operation
Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
1 HP208V 1 PH Industrial Continuous Duty Jackshaft Operator
Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
3/4 HP460V 3PH Industrial Continuous Duty Jackshaft Operator
Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included