Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
K72-19974-RB

LiftMaster Output Shaft & Sprocket

  • Kit includes: Output shaft sprocket assembly dual sprocket 32/14 sprocket 48B18x1 sprocket 50B12x1 ring washer key set screw roll pin and thin walled receivers
PRO-J-10053-U-RH

Micanan 1HP 575V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
TRACK-SET-2STD-8

2" Tracks Set 8'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

TRACK-SET-2STD-7

2" Tracks Set 7'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

S2TR2681E2

Erone 2-Channel Mini Transmitter 868MHz

Wireless System Chart
MK-00666

Micanan RF Junction Connector for Antenna

MK-00054

Micanan Overload Reset 3-Phase 12.0 - 16.0 Amps

MK-00043

Micanan Overload Reset 1-Phase 15 Amps

MK-00044

Micanan Overload Reset 1-Phase 17 Amps

MK-00225

Micanan Transformer 110V-24V-100VA

MK-00141

Micanan Transformer 220V-24V-100VA

MK-00228

Micanan Transformer 230V-24V-50VA

MP-00077

Micanan Heavy Duty Front Idler (Trolley End Bracket) #41 w/Pillow Blocks

MK-00024

Micanan Single Limit Switch AT

MP-00076

Micanan Heavy Duty Front Idler (Trolley End Bracket) #41

MM-00319

Micanan PRO-GJ L-Bracket Right Angle Front of Coil For Rolling Steel Doors

MK-00300

Micanan Time Delay on Reverse 0.5 sec. 24/110V

  • In closing cycle door will stop for 0.5 seconds and reverse to fully open
MV-00018

Micanan Key Switch ON/OFF Nema 4 Surface Mount

MV-00305

Micanan Wireless Pull Cord

RBH103L5-RH

LiftMaster 1 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Right Hand

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
MP00226

Micanan Track and #41 Waterproof Chain for 10' h Door

  • For 3/4 & 1 HP Micanan trolley operators
DM-100

Skylink Swing Door Opener with Electro-Magnetic Lock ***NLA

  • Can be installed on most doors including wood and metal doors.
  • Hit and Stop feature ensures safety operation.
  • Fail safe operation - Door can be open/close freely during power outage
  • Optional audio warning as an indication when the swing door opener is operating
  • Can learn up to 16 remote controls
GDI-HB320

GDI Direct Drive & Jackshaft HAML-RBH-A830 Nema 4 To Accept 1" Shaft UL325 Photo Eyes Extra

  • Compact & Light Weight - Fast Installation
  • Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
  • Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
  • Soft start soft stop
    • .......more details
.437-514-R

Cut-to-Length Torsion Spring .437 x 5-1/4" Right Hand Wound Red/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.437-334-R

Cut-to-Length Torsion Spring .437 x 3-3/4" Right Hand Wound Red/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.295-6-R

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-600-INSTALLED
.243-334-L

Cut-to-Length Torsion Spring .243 x 3-3/4" Left Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
LMWETXU

LiftMaster Wireless Edge Transmitter Monitored

  • Connects to wireless edge receiver using low-energy Bluetooth transmission
  • Sensing distance up to 130 ft
  • Transmitter accepts up to 2 wired resistive edges
  • Battery life 2 years
  • NEMA 4X rated
  • Compatible with LMWEKITU Wireless Edge Kit and L50 and S50 Monitored Resistive Edges
    • .......more details
Installation manualManuel d'installationProduct GuideGuide de produit
PRO-J-5043-U-RH

Micanan 1/2HP 460V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
PRO-GT-5053-U

Micanan 1/2HP 575V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

ALUM-513

Aluminum 24" x 100' Spool Moonlit Moss / Poussiere de Lune # 513

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 513
  • Reverse side is #431 Bright White
Colour chart
PRO-APTB-5083-U

Micanan 1/2HP 208V 3P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-TB-5083-U

Micanan 1/2HP 208V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-T-5023-U

Micanan 1/2HP 230V 3P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-T-5011-E

Micanan 1/2HP 115V 1P Trolley Operator NM ECB No Eyes

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Non-Monitored board NO photocells
  • On-Board receiver holds up to 20 transmitters
60-7244

Econo Caution Sign French 14" x 10"

60-7242

Econo Caution Sign English 14" x 10"

60-7248-SC8

Wheel Chock Safety Pkg incl'd: alum. chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) SC-8 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • "Claw" Like Bottom Assures Dependable Grip on Any Surface
  • Chock Fits Snug Under Tire Contour for Maximum Holding Power
  • Often Preferred For Snow and Ice Conditions
  • Light Weight and Reliable
  • Size: 7" wide x 11-1/2" long x 8" high
    • .......more details
60-7248-SC6

Wheel Chock Safety Pkg incl'd: alum. chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) SC-6 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • Excellent Surface Grip on Tire and Ground
  • Lightweight Aluminum
  • Size: 6" wide x 6-1/2" long x 6" high
CMH-94

Wheel Chock CMH-94 Rubber with Integral Handle

  • One Piece Solid Rubber
  • Integral Handle
  • Long Lasting 80 Durometer rubber
  • Size: 7-1/4" wide x 9-3/4" long x 7-3/4" high
1004-2-16'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 16 ft***Actual Length 16'2"***

  • For door thickness 2"
RELAY039

Manaras Relay 3-Pole 24VAC

27122

Doorlec Electric Motor 1/3HP 208/480/575V 3PH DC321

K10-33850

LiftMaster E-Box Cover MH MJ MT

RBH503L5-LH

LiftMaster 1/2 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Left Hand

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
2200-926

Linear Gear Reducer 60:1 Models SWR SWD

R5212

Pulley 5" Zinc Plated Clevis Pulley with Strap ** To extent of inventory

MM00284

Micanan Disconnect Arm PRO-HHD MSI0277

MM00021

Micanan Disconnect Lever MSI0012

D4-120

Extruded Bumper Black 120" L x 4 1/2" W x 3 3/4" H w/Metal Insert

  • Sold in 10' Lengths and cut to measure
  • Includes 10' Metal Washer Insert
  • Comes with 5 Holes for mounting or none - Please Specify When Ordering Bumper
SMF5005

Adjust Holdown Assembly With Internal Float ** Price by Quote

  • Ratchet Bar Not Included
  • A brake band hold-down for a mechanical dock leveler includes a frictional brake that grabs the hold-down when the ramp is at the proper elevation.
  • If additional upward force (this can happen when trailers move up and down when trucks are loaded or unloaded) is applied to the ramp the frictional brake will give way just enough to accommodate the change.
  • This prevents the dock leveler ramp from being damaged.
  • For Serco mechanical dock levelers
E/BLOP/150

Automatic Systems Safety Edge for BL229 14'-9" (EABLOP/150)

CAPACITOR031R

Manaras Capacitor 324-389uf incl. Bleeder Resistor

SPR50B54X11238

Sprocket 50B54 for a 1-1/2" Shaft 3/8" keyway

T

Molded Rubber Bumper Black 22" L x 10" W x 12" W 3" Projection Centered Reflector 3-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
  • Bumper comes with 3 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
DBE-30

Molded Rubber Bumper Black 30" L x 4 1/2" W 3" Projection 6-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
  • Bumper comes with 6 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
MV-00133

Micanan Control Station 3-Btn O/C/S Nema 4 Surface Mount c/w Pilot Light 24V ** DISC..

M2818

Molded Rubber Bumper Black 18" L x 8" W 2" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles
  • Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
LB1210-14

Laminated Bumper Standard Black 10" x 14" 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB920-11

Laminated Bumper Black 9" Projection Vertical Installation 20" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB410-36SF

Steel Faced Laminated Bumper Black 10" x 36" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB410-18SF

Steel Faced Laminated Bumper Black 10" x 18" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB410-14SF

Steel Faced Laminated Bumper Black 10" x 14" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB612-18SF

Steel Faced Laminated Bumper Black 12" x 18" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB612-14SF

Steel Faced Laminated Bumper Black 12" x 14" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-14SF

Steel Faced Laminated Bumper Black 12" x 14" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-36SF

Steel Faced Laminated Bumper Black 10" x 36" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
41A4371

LiftMaster Belt Cap Retainer

  • Same as 41C4371
MK-00050

Micanan Overload Reset 3-Phase 2.6 - 3.7 Amps

K32-8002

LiftMaster Gear Reducer

  • Also known as: 32-8000 G328001 32-8001 328002 328001 32-8002 G328002
MB-03202

Micanan Electric Motor Only 1 HP 575V 3PH Base Mount O.D.P FR56

  • Fits T TB APT APTC J EJ H EHJ HHD SD
MG00018

Micanan Lock Washer 3/8"

  • PRO-GHC operator parts
  • 10 required per operator
MH00043

Micanan Flange Bearing 3/8" D **** Replced by MH00096

MD-00060

Sprocket 50B36 1-1/4" shaft 1/4" KW 2SS 5/16"

  • 36 tooth sprocket for #50 chain
K20-1050C-2TLP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph TEFC Logic

MG00041

Micanan Spring Clip 7/8" ID Sold Individually

  • 2 required per machine
3BLM

Exterior Control Station 3 Button N4 with Mortise Lockout in Metal Enclose

  • Open-Close-Stop
  • Dimensions: 7" h x 2-3/4" w x 3-1/2" d
  • Exterior surface mount
3BLM
RCB-TIP

Roller Chain Break Replacement Tip Only *** NLA

  • Replacement tip only for RCB-2560
MIRF-Z2-50

Miller Edge Patriot 2 Photo Eye Fail Safe 50ft Non-Contact

  • Meets current UL325 standards for commercial door and gate operators*
  • Thru Beam technology minimizes false reflective signals
  • Travels with the door
  • Easy to Align
  • No need to stock special sizes - works up to 30 feet wide or up to 50 ft wide depending on the model
  • Convenient - Assemble and install in the field
    • .......more details
BINS-SANDSTONE

Utility Bin Heavy-Duty Stackable Sandstone *** No Longer Available

  • Usable in virtually every environment both indoor and outdoor and they are made from Polypropylene which will not fade in the sun
  • Outside dimensions: 16.75" L x 10.75" W x 6.55" H
  • Inside dimensions: 12.15" L x 8.375" W x 6.5" H
  • Sold per bin
WHITING-SPEC-ORD

Whiting Special Order Parts

  • Special order to customer's specs
ME00037

Micanan Clutch Shaft Only for PRO-LH

40-3505

LiftMaster Gate Warning Sign Plastic English

VWS-34-CHRY-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Cherry Oak

  • Pan head
BRACKET111

Manaras Hood Mount Angle Bracket

HSLG-221

Linear Commercial Slide Gate Operator 1/2 HP 230V 1 Ph - Heater not Included

  • Max gate size: 35 ft 1000 lbs
  • Max duty cycle: Continuous
  • Integral APeX Controller
  • Double V-belt to chain reduction
  • #40 roller chain
  • Emergency manual disconnect handle
    • .......more details
36190S.S

Genie Control Board 6-Terminal

  • Replaces board # 34514R # 20380R
  • 36190S.S is a six terminal board for use primarily with ML Chain Glide devices.
  • Replacement board for Chain Drive models: IC250B PMX300 PMX500 ICB and 496.696 CD/B
  • Replacement board for Chain Glide models: GCG350 GCG350L GCG350M PCG400 PCG450 PCG500ML PCG600 PCG650 H2000C OCG510 OCG550 OCG600ML OCG710 and OCG800ML
8280.96

Whiting Aluminum U-Channel 96-5/8 IN Dry Freight

  • An original Whiting product
  • Use with Whiting seal # 5735.96
DM18VL-T/FORCE

Cable Drum Vertical Lift 18' D1100-216-1 Pair Torque Force

  • 18' Vertical Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x2" hardened cup point set screws installed with red heads.
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
  • Max. Door Height: 18'-1".
  • Rated Lift per Drum: 660 lbs.
  • Max. Cable Diameter: 3/16".
    • .......more details
Q209

LiftMaster Gear Reducer Pulley K17-50223

  • DC-1000 1/2" ID
27089A

Genie Washer

  • Drive shaft washer for PMX500
MD-00280

Sprocket 41B32 x 1" 1/4" Keyway 2SS 5/16 Small Hub

  • 2 set screw 5/16
9006-10

Excalibur Threshold Kit 10'2" x 6" W Solid Aluminum ** Price by Quote Only

  • Stands 1/2" tall
  • Built with 6061-T6 solid aluminum to withstand extreme weight and excessive traffic conditions.
  • Two-way fastening/seal system won’t shift buckle or leak
  • Top V-groove design provides for skid proof protection and improved tire traction on loading docks and incline ramps.
  • The 1/2" diameter wire access port makes it easy for sensor and security installations.
  • The kit comes complete with pre-drilled counter sink holes 3/8" anchors and sealant.
    • .......more details
RS1311

Roller 3" Steel 11" stem Precision Bearing

  • Steel Roller Wheel diameter: 3" 11" stem length 7/16" stem dia
5001-8-WHITE

Residential Side & Top Weather-Strip 8' Long - White

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
MB-02004

Micanan Electric Motor Only 3/4 HP 110/220V 1PH C-Flange TEFC 56C

  • C-Flange TEFC electric motor
  • Fits models: GT GH GHC & GSD
26CW94323-CUT

Truck Door Bottom Panel with Seal (13" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes only with bottom retainer and seal (installed)
    • .......more details
RB741

Linear / GTO 1-Button Transmitter 318 Mhz

  • Standard transmitter included with all GTO gate operators
  • Much smaller in size than previous model and improved signal range
  • The single button controls the gate operator and has adjustable code settings and has (new miniature) visor clip for your vehicle and now a whole for key-ring or key chain.
  • It is compatible with GTO and Mighty Mule gate operators
  • The code settings are the 9 dipswitches located inside the cover.
  • Measures: 2-1/2 H x 1-1/2 W x 9/16 D.
    • .......more details
6X35PO50

Devanco Loop 6' x 35' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
MM00020

Micanan Disconnect Arm