Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
0/7530/248

Automatic Systems 5/8 Right Hand Rod End with Zerk

  • Used on the BL229 gate op.
0/7530/249

Automatic Systems 5/8 Left Hand Rod End with Zerk

  • Used on the BL229 gate op.
E/1929/235

Automatic Systems Axis 1.5" Ass'y w Bearings(BL229)

  • Used on the BL229 gate op.
  • Main pivoting shaft
SPRAY-429

Aluminum Touch Up Spray Paint Ice White / Blanc Glacier #429 *** To Extent of Inventory

  • 140g
10W8

Resistor 10W 8K OHM

ETH-A

Doorlec Trolley Type Apartment Op. 1/2 HP 120V Head Only

  • This operator can be wire to receive radio and photo electric control systems loop detectors etc..
  • Headroom Required: 2" minimum at doors highest arc of travel
TRACK-SET-2STD-14

2" Tracks Set 14'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

SF514-S

Spring Fitting 5-1/4" Stationary Side Only for 1" & 1-1/4" shaft

  • Can be used with either 1" or 1-1/4" winding cones
  • Includes: (1) stationary side only.
  • 2 x 3/8-16 thread holes at CC=4.25"
SF514U-114-W

Spring Fitting 5-1/4" Winding Side Only for 1-1/4" shaft

  • Universal thread for use in either LH or RH wound springs.
  • Includes: (1) winding side only
TRACK-SET-2STD-10

2" Tracks Set 10'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

TRANSF112

Manaras Transformer 575V-24V-50VA

KP-680-ETL

Koala Air Blower 1/2 HP *** Indef. Delivery

  • Powerful extra quiet and energy efficient 1/2 HP motor
  • 115V / 1 Speed
  • Durable super lightweight and compact Polypropylene housing design
  • ETL/CETL Safety Certified
ME123-2M-BLK-LH

Miller Edge Black LH 2-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
MD00019

Micanan Sprocket 50B40 X 1" 1/4" KW 2SS 5/16

ULTRA-DIN

EMX Industries DIN Rail Mount Vehicle Loop Detector

  • Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
  • Easy to install and setup with the ULTRAMETER™ sensitivity display
  • Low current draw – green product
  • Easy identification of interference problems using the crosstalk and RFI interference display
  • Fits into small operator housings saving space size: 80 x 23 x 84 mm
  • 10 sensitivity settings
    • .......more details
RS2910B

Roller 2" Steel 9" stem 10 ball

  • Steel Roller Wheel Diameter: 2"
  • Working Length: 8.41" Overall Length: 9.46"
  • Head and Stem Finish: Bare
  • Shoulder: Bulged stem
  • Rating: 15000 cycles of a 12' door
  • Load: 75LB
    • .......more details
SBB-3

3" Safety Bottom Bracket Low Tension Sold as a Pair Torque Force

  • Includes 1-Right hand and 1-Left hand
  • Zinc plated Steel
  • Max Door Weight: 2200 LBS
  • Cable attachment: Fixed
  • Protective cover: No
  • Use with: Straight track 3"
    • .......more details
Installation instructionsInstructions d'installationSpec sheet
1224-2-BLACK

Elton Commercial Window for Flush Doors 2" thick 1224 Black Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 25-1/8" x 13-1/8"
  • Cut-out size: 24-1/16" x 12"
  • Vision area: 21-11/16" x 9-5/8"
  • Different glass options and frame colours are available upon request
    • .......more details
MIRCU-02

Miller Edge Universal Non-Monitored Interface

  • Converts a monitored pulsed signal to a non-monitored normally open signal
  • Creates a Fail Safe signal; reports a fault when power is lost
  • Ideal for use with pre-2010 commercial door operators
Installation instructionsSell sheet
RADIO-RE901

Manaras 1-Channel 24V Dip-Switch (313MHz) & Rolling Code (390MHz) Receiver

  • For Commercial/Industrial Garage Door Applications
  • Wall Mount
  • DIP Switch and Rolling Code Technology
  • Sixteen (16) Fixed Codes / Receiver
  • 313 MHz Radio Frequency
  • Controls One (1) Door
    • .......more details
Programming instructionsManualSell sheetManual
MTR1

Linear 1-Channel Visor Transmitter 318MHz *** To Extent of Inventory

  • Activates one MegaCode receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Visor clip mounts vertical or horizontal
  • Power: One 2032 battery
  • Codes: 1000000+ (MegaCode format)
    • .......more details
Programming instructionsInstructions de programmation
4JW-LEFT

Rolling Steel 3" Curved Cast Windlock 273002 LH

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
60-7531

Fasteners Wedge Anchor 3/4" x 5-1/2" 4/Bag

  • Secure anchoring into concrete brick or block
  • Ideal for mounting dock bumpers
  • 4 per bag
SPR50B36X1

Sprocket 50B36 1" shaft 1/4" KW

  • 36 tooth sprocket for #50 chain
44-30703

LiftMaster Enclosure SL595

  • Replacement SL595 Enclosure
  • Also known as: 44-18491
2500-2347

Linear Limit Switch SPDT Omron D2VW

STATION082

Manaras Push Button Control Station 2-Button Nema 4/12

  • 2-button 2 N/O contact
  • Plastic
BRX10

GDI Brake Kit Brake Kit with Pull-rods; Axial

G3243

GDI Battery Backup Option G3243

  • BBU option if AC power is lost
H14G03-BLACK

Hinge #3 x 14 gauge Black Powder Coated

  • Black powder coated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • Individually wrapped
H14G04-BLACK

Hinge #4 x 14 gauge Black Powder Coated

  • Black powder coated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • Individually wrapped
H14G01-BLACK

Hinge #1 x 14 gauge Black Powder Coated

  • Black powder coated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • Individually wrapped
BK000-B/BLACK

Residential Top Roller Bracket Adjustable 2-Bolt Black Powder Coated Sold per Piece

  • Sold per piece - not sold as a pair
  • Meant for 2" hardware
  • Individually wrapped
HD3120-BLACK

Commercial 3" Inside Slide Lock Black Powder Coated

  • Track use: 2" or 3"
  • Throw: 2.62"
  • Slide bar: 0.138"
  • Individually wrapped
BK149/PR

Residential Bottom Bracket RBB-75 sold as a pair

  • For use with 2" straight track
BK149/PR-BLACK

Residential Bottom Corner Bracket RBB-75 Black Powder Coated sold as a pair

  • For use with 2" straight track
  • Individually wrapped
19-48055MB

LiftMaster Limit Chain Assembly #48 x 55

  • Fits the SL575 & SL585GL gate operators
  • Same as K19-48055MB
2510-273

Linear 230-Volt Heater for Gate Op

E/1929/071

Automatic Systems Round Arm Ass'y 16'-5" (BL229)

  • Used on the BL229 gate op.
RADIO-EM144

Manaras 144-Door Transmitter O/C/S 390 MHz

  • 3-button O/C/S transmitter for144 Doors
  • LED Indicator Nema 1 Enclosure
  • Soft touch push buttons including a bright red stop button for easy identification
  • Compatible with Manaras Opera Rolling Code Series "100" Transmitters and receivers
  • Compatible with Manaras Operators equipped with Board 70 or external receiver Radio-RE901 and Radio-Kit004 & Radio-Kit005
  • Wall or Post mount
    • .......more details
Sell sheet
MD00077

Roller Chain #40 Sold by the Foot

MGH-6113-ECB-LH

Manaras 3/4 HP 120V 1P Jackshaft with Elect. Circuit Board Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
2100-564

Linear Clutch Disk Facing HSL HSLG

CAMPLATE001

Manaras Cam Plate GH Standard

22010

Doorlec 1-22mm Cylinder Complete with Normally Open Contact Spring Return Includes 2 keys

AW-10

Miller Edge Air Wave Switch Only No Enclosure

  • Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
  • Applications: commercial sectional doors rolling doors and mass transit
  • Works on doors up to 60ft
  • Can be used with standard pneumatic hose and Miller Edge extrusion
  • Sensitivity: 2mm to 500mm
  • Ambient temperature range: -49F to 180F
    • .......more details
Instruction manualSell sheet
E/BLOP/005

Automatic Systems Standard Tip Support Option

MA041

LiftMaster Mega Arm Tower Lock & Keys (No Dust Cover)

  • Comes with two keys
RADIO-RE901A

Manaras 1-Channel 24V Dip-Switch (313MHz) & Rolling Code (390MHz) Receiver with Commercial Antenna

  • For Commercial/Industrial Garage Door Applications
  • Wall Mount
  • DIP Switch and Rolling Code Technology
  • Sixteen (16) Fixed Codes / Receiver
  • 313 MHz & 390MHz Radio Frequency
  • Controls One (1) Door
    • .......more details
Programming instructions
328-729

Lip Shock Absorber Dock Leveler

  • Used to control descent of dock leveler lip
  • 1/2" holes are 10.4" center compressed 16.25" when extended
SPRING040

Manaras Disconnect Spring

MOUNTSHAFT015

Manaras Hoist Shaft Kit for OGH

HAE00012

Linear Motor Cover LDO50

  • Replacement motor cover only
LPWKP-G

Linear MegaCode Wireless Keypad 318 MHz Cool Grey **** Replaced by NMTK

  • Activates multiple MegaCode receivers
  • User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
  • Programming is easy via the keypad; MegaCode receiver auto-learns PIN
  • Backlit keys for easy viewing
  • Wall mounting hardware (2 screws and anchors) supplied
  • Power: Three AAA batteries
    • .......more details
STRUT-2-1/4-16'

Door Strut 2-1/4" Hemmed 16ft Long

  • Reinforcement bar 2-1/4"
OSH-6813-ECB

Manaras Opera-SH 3/4 HP 208V 1Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
MOD130

Manaras Cogged V-Belt Upgrade

  • The standard v-belt is replaced by a cogged v-belt for added durability
  • Applies to: OSH OTH OTH-A.00 OTBH OTBH-A.00
  • This is available only as an upgrade with the purchase of a commercial op.
112561

Allstar MVP-RE 24V 8 Wire Receiver 288 MHz *** NLA

  • Three channels – three relay outputs
  • 8-wire operator connection
  • Wire whip antenna with “F” connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
    • .......more details
41A7278

LiftMaster Sprocket Kit 12-Tooth

  • Includes sprocket and screws
GAL.262-258-144L

delete

VMD202-R

EMX Remote Tuning and Adjustment Control Device

  • If you wish to “tune” the sensitivity the accessory VMD202-R will need to be plugged temporarily into the connector.
  • The VMD202-R may then be removed or left in place as desired.
10-10191-GR

LiftMaster Brake Disc

  • For various Liftmaster commercial slide door operators
  • Also known as: 10-10191-GR 10-10191-GR 1010191 G105209 10-10191 105209
41D3058

LiftMaster Electric Motor and Bracket Kit

  • Complete kit includes: Motor and bracket assembly sprocket RPM sensor grease and bearings
  • Also known as: 41D3058 41A2821 41A2820 41A3058
LZE500

Erone L & Z-Bracket for Maglock ESM500

T-831

FL-Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 311 MHz 107483

  • Open/Close/Stop stationary remote for 1 door.
  • Designed for commercial automatic door and gate operator applications.
  • This transmitter can operate a single receiver connected to one operator
  • Compatible with 3-channel Allstar and MVP receivers
  • Easy access to battery and coding switch
  • Power: 9-volt battery
    • .......more details
2110-823

Linear Idler Assy Wheel with Bolt for 1/2hp SL Gate Op.

SPR41B44-1

Sprocket 41B44-1" shaft

ESM500

Erone 1200lbs Exterior Maglock Surface Mount Stainless

  • Exterior applications & High-traffic areas
  • Power requirements: 12/24VDC
  • Current Draw: 500mA @ 12VDC 250mA @ 24VDC
  • Monitoring sensor
  • Visual feedback (red & green)
  • Optional L/Z bracket sold separately: LZE500
    • .......more details
Installation manual
G-21X13-134-BLK

Thermal Window Clear 21" x 13" for 1-3/4" Garaga Door Black

  • For 1-3/4" thick door
MGH-6435-ECB-LH

Manaras 1.5 HP 480V 3P Jackshaft with Elect. Circuit Board Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6435-ECB-RH

Manaras 1.5 HP 480V 3P Jackshaft with Elect. Circuit Board Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
RBH505L5-RH

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 Right Hand

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
SABLOP/12X

Automatic Systems Red LED Lighting Module for Arm

RBH505L5-LH

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 Left Hand

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
ACP00942

Linear Control Board for Telephone Entry System AE-100

  • Board only for AE-100 telephone entry system
26124

Doorlec Clutch Shaft 12-5/8" x 5/8" LJH

  • Previous shaft size was 11-3/4" but have now been replaced by 12-5/8" to accomodate larger box size
26CW14522-CUT

Truck Door Intermediate Panel (12" x Cut-To-Size) Painted White for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
36045A

Genie Helical Gear 2040L

  • Helical gear assembly for the Genie #2040L garage door opener.
  • Same as: 36045AS 36045. 36045A 36045S
  • Includes: Helical and limit gear screws clips and small tube of grease.
7M-NICE-BAR-ASBY

NICE Replacement Bar Assembly for M7BAR Barrier Gate

  • Bar assembly comes with:
  • (1)XBA15 -- 3M BAR
  • (1)XBA14 -- 4M BAR
  • (1)XBA9 -- EXPANSION JOINT FOR CONNECTING BARS
  • (2)XBA13 -- RUBBER IMPACT PROTECTION STRIP
  • (2) WA10 -- RED ADHESIVE REFLECTIVE STRIPS
    • .......more details
LMRRUL

LiftMaster Monitored Retro Reflective Photo Eye w/Heater 2018 UL325

  • Features integrated diagnostics with our 2018 UL® 325 Gate Operators.
  • Versatile Solution for entrapment protection.
  • Long-Range Sensing Distance of up to 50 ft. (LMRRUL)
  • Built-In Heater for dependable performance in most environments.
  • Increased Beam Angle for simple reliable alignment.
  • Versatile Gimble Bracket for fine alignment and adjustability.
    • .......more details
Installation manualManuel d'installationSell sheet
.192-2-R

Cut-to-Length Torsion Spring .192 x 2" Right Hand Wound Silver

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.192-2-L

Cut-to-Length Torsion Spring .192 x 2" Left Hand Wound Silver

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
K10-10166

LiftMaster Clutch Plate

  • Also known as: 1010166 10-10166 142A122 AB112-00230 1090371 142C131 10-9037-1 G1090371 0890371 G1010166 112-00230
41A7618

LiftMaster End Panel with Battery Cover and Light Socket 8550W

2806.162.18

Whiting .162 x 2-3/16 x 18" Roadside with Cones

2807.162.180

Whiting .162 x 2-3/16 x 18" Curbside with Cones

BEARING006

Manaras Flange Sealed Bearing 5/8"

  • Flange sealed bearing for 5/8" shaft
2376.177*26.960

Whiting Torsion assembly .177 wire size 26" spring length 96" shaft

S505AL

LiftMaster Monitored Small Profile Resistive Edge w/Aluminum Channel 5ft

  • Meets 2016 UL 325 requirements Edge sends signal to stop and/or reverse operation when sensing obstructions
  • Fast easy to install mounts vertically or horizontally
  • Compatible with Wireless edge kit LMWEKITU Transmitter LMWETXU and LiftMaster Gate Operators with Monitored Safety Inputs
Installation manual
P-75

End Plug for 3/4" ID Rubber Hose

  • Sold per plug
P-75H

End Plug for 3/4" ID Rubber Air Hose w/ Center Hole Qty 1

  • Sold per plug
RAH-750-100

Pure Gum Rubber Air Hose 3/4" ID 1/8" Wall Beige 100ft

218-45-10

PVC Connector for 3/4" - 3/32" RAH

30005

Doorlec Brake Solenoid 208V with wire leads

BTN-8L5-RD

Devanco red replacement button for 8L5-OCS

  • red replacement button for 8L5-OCS
SELECTOR-8L5

Devanco replacement rotating 8 position switch selector for 8L5-OCS

  • replacement rotating encoded 8 position selector for 8L5-OCS
XBA13

NICE Rubber Impact Red Protection Strip 9M/Pkg

WA10

NICE Red Adhesive Reflector Strips 24pcs/Pkg

SPGAP06400A

NICE Replacement Nylon Insert Kit

K72-33889

LiftMaster Clutch Shaft Kit

  • Clutch Shaft Kit for MJ Jackshaft Operators
  • Complete with: Clutch Plate Clutch Shaft Bearing Sprocket 5L Belt Motor Pulley Spring Clutch Disk Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener
  • Same as 308117101K 310115111 K7212589 K72-12589 71116121J