Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
LB410-36SF

Steel Faced Laminated Bumper Black 10" x 36" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB410-18SF

Steel Faced Laminated Bumper Black 10" x 18" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TVB620-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 20" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
TB612-36SF

Steel Faced Laminated Bumper Black 12" x 36" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB610-14SF

Steel Faced Laminated Bumper Black 10" x 14" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-36SF

Steel Faced Laminated Bumper Black 12" x 36" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-14SF

Steel Faced Laminated Bumper Black 12" x 14" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-36SF

Steel Faced Laminated Bumper Black 10" x 36" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-24SF

Steel Faced Laminated Bumper Black 10" x 24" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB624-11

Laminated Bumper Black 6" Projection Vertical Installation 24" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-24

Laminated Bumper Standard Black 10" x 24" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-18

Laminated Bumper Standard Black 10" x 18" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-12

Laminated Bumper Standard Black 10" x 12" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-14

Laminated Bumper Standard Black 10" x 14" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LLB420-22

Laminated Bumper Black 4" Projection L-Shaped 20" x 22" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • This model has angles on both sides
    • .......more details
LVB436-11

Laminated Bumper Black 4" Projection Vertical Installation 36" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LVB430-11

Laminated Bumper Black 4" Projection Vertical Installation 30" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB412-36

Laminated Bumper Standard Black 12" x 36" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB412-14

Laminated Bumper Standard Black 12" x 14" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
MK-00120

Micanan Heater Probe in Reducer Mod. (120V 20W 3/8" NPT)

44-60-280

Extension Spring 10' Door - 280 lbs Gold ** By Quote Only

  • Clipped ends
  • 44" long 60" stretch 280 lb load
PRO-GHC-30053

Micanan 3 HP 575V 3P Gearhead Operator No Controls

Specification sheet
BPPVCT

Garex PVC White Transition Moulding 289" #3764

  • Universal garage door panel adapter molding
  • Use on any 1-3/4" door
  • Allows a Garex panel to be used as replacement on any brand door
  • 24' lengths only can be cut for transport
MD-00246

Double Sprocket 41B14 / 41A32 with 1" Bushing

  • Double sprocket for PRO-H/HB
T008

Manaras Trolley Track 8ft for 1/2HP models *Actual length 126"*

  • For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)
T007

Manaras Trolley Track 7ft for 1/2HP models *Actual length 114"*

  • For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)
MK-00050

Micanan Overload Reset 3-Phase 2.6 - 3.7 Amps

MK-00229

Micanan Transformer 575V-24V-50VA Not Fingersafe

AIRSWITCH016

Fraba Air Wave Switch Only

  • Fraba air switch only
BTM-BK-PCG/PR

Powdercoated Commercial 3" LHR Bottom Brackets Grey Sold as a Pair (L & R) *** NLA

  • EZ123 UPWARDOR
  • Powdercoated grey
  • Use with: 3" straight track
  • Sold as a pair (includes one left and one right).
HINGE-611-PCG

Powdercoated Hinge #6 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #6 - 0.81 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
HINGE-311-PCG

Powdercoated Hinge #3 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #3 - 0.73 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
26CW14225-CUT

Truck Door Bottom Panel with Hardware (15" x Cut-To-Size) Painted White for Todco Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels are routed and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes with 18" pull strap assembly two bottom fixtures standard lift handle two cable anchor brackets seal and retainer.
    • .......more details
R2

Erone Radium 2-Channel Key Chain Transmitter 433MHz

  • Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
  • The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
  • A special algorithm allows to keep synchronized transmitter and receiver.
  • Range up to 250 m (820 ft)
  • Ergonomic rugged & durable
  • Battery: Two 3V lithium battery (CR2016)
    • .......more details
Wireless System Chart
K32-8002

LiftMaster Gear Reducer

  • Also known as: 32-8000 G328001 32-8001 328002 328001 32-8002 G328002
MJ00015

Micanan Brake Shoe Assembly for Old Style Manaras Operators

  • Assembly includes both right & left brake shoe
LA500XL20W

LiftMaster Single Arm Solar Package for LA500 Gate Operator UL325 (Include (2x) SP10W12V Solar Panels (1x) XLSOLARCONTUL Control Box (1x) K94-37236 Solar Harness (1x) LMRRUL Photoeye (1x) K10-36183 Battery Tray (2x) A12330SGLPK Batt. (1x) LA500DC)

  • Kit Includes: LA500DC arm XL Solar control box (XLSOLARCONTU) which includes two 10WATT 12V Solar panels compatible with LA400 LA412 and LA500 Universal Solar harness (K94-37236) Monitored Retro Reflective Photos Eyes (LMRRU) Battery Tray (K10-36183) and two batteies (A12330SGLPK)
  • For dual gates order extra LA500DCS secondary arm
  • Updated unit complies with new UL325 code revised Jan 2016
  • Commercial Duty Cast Aluminum Housing with Heavy-Duty DC Motor powerful enough to perform in the most demanding applications. Soft start/stop operation extends operator and hardware life for heavy-duty gate use.
Manuel d'installationInstallation manualSell SheetBrochure
HAE00057

Linear LDCO Motor with Encoder

  • For LDCO800 operators manufactured before 04/2011 compatible replacement part number HAE00053 for motor with encoder and HAE00054 for encoder board.
MK-00030

Micanan Transformer 115V-24V-40VA

Z9211-2

Stationary Cone Tool 2-5/8"

  • Easily dislodges the cone from the torsion spring
MF00007

Micanan Hex Head Bolt 1/4" - 20UNC 3/4" Full Thread

  • Used on PRO-GHC
  • 4 required per operator
MB-03202

Micanan Electric Motor Only 1 HP 575V 3PH Base Mount O.D.P FR56

  • Fits T TB APT APTC J EJ H EHJ HHD SD
MH00004

Micanan Flange Bearing UCFL207-22 1-3/8" Bore

  • Used on PRO-GHC (BHC-80) for 2 3 5HP
  • 2 required per motor
9-22-1

Offset Strut Plate

MH00043

Micanan Flange Bearing 3/8" D

MD-00005

Sprocket 410B12 3/8" NO KW 2 SS 1/4"

31343

Doorlec Sprocket 41B23 - 5/8" bore 2-Hole

K20-1050C-2TLP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph TEFC Logic

41A4208-2

LiftMaster Chain Spreader Kit

  • Chain Spreader Replacement Kit.
  • For use with various LiftMaster® and Chamberlain® Chain drive garage door opener models.
  • Complete kit includes: Chain spreader replacement screws and washers.
  • Also known as: 41A4208 41A4208-2 062210
MM-00126

Micanan Wall Mounting Plate (Reducer 80/100)

2806.139*130

Whiting Spring Assby .139 x 2-3/16 x 13" L Roadside

  • Replacement torsion spring with cones
  • Specs: .139 x 2-3/16" x 13" Long
  • Roadside
  • For Curbside order part # 2807.139.130
MM-00035

Micanan Chain Keeper

MH00003

Micanan Oilite Flange Bushing 3/4 ID x 7/8" OD Sold Individually

  • 2 required per machine
BB-1

Rubber Button Cover Black for 3BLM PBS

  • Rubber button cover only
K20-1075B-2TLP

LiftMaster Electric Motor 3/4 HP 115/230V 1Ph L3 L4 TEFC

MIRF-Z2-50

Miller Edge Patriot 2 Photo Eye Fail Safe 50ft Non-Contact

  • Meets current UL325 standards for commercial door and gate operators*
  • Thru Beam technology minimizes false reflective signals
  • Travels with the door
  • Easy to Align
  • No need to stock special sizes - works up to 30 feet wide or up to 50 ft wide depending on the model
  • Convenient - Assemble and install in the field
    • .......more details
CP-NCAM

Lynx Limit Cam 5/8-24 Travelling

  • Limit cam / limit nut
MF-00018

Micanan 3/8" Take-Up Bolt c/w 2 Hex Nuts & 1 Lock Washer

BINS-BLACK

Utility Bin Heavy-Duty Stackable Black ** NLA

  • Usable in virtually every environment both indoor and outdoor and they are made from Polypropylene which will not fade in the sun
  • Outside dimensions: 16.75" L x 10.75" W x 6.55" H
  • Inside dimensions: 12.15" L x 8.375" W x 6.5" H
  • Sold per bin
WHITING-SPEC-ORD

Whiting Special Order Parts

  • Special order to customer's specs
IRB-325

EMX Industries Door and Gate Infrared Thru-Beam Photocells w/ Grey Hoods UL325-2016 EMX-1112-K

  • Type B1 non-contact sensor for use with automatic gates and doors
  • Power: 12V to 24V AC/DC
  • Relay Contacts: 30V 1A
  • Dimensions: 5.03" High x 3.06" Wide x 3.02" Deep
  • Housing: UL and CSA Type 4 4X 3 3R 12 13 Rating
  • Operating Temperature: -40 degrees to 170 degrees
    • .......more details
Installation manualSell sheet
MK-00646

Micanan 9" Coax Cable for On-Board Receiver

IRB-RET-HD

EMX Industries Steel Protective Hoods Only Black Fits Old Style IRB-RET Only

  • Protective Hoods for the Universal Retro-Reflective Monitored Photo Eye System (Item #IRB-RET) by EMX
  • Easily installed using the existing mounting holes of the Photo Eye
  • Constructed of zinc plated steel
  • Black powder-coated finish
  • Will NOT fit the new IRB-RET UL325-2018 units
ALUM-5P3

Aluminum 24" x 100' Spool Espresso # 5P3

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 5P3
  • Reverse side is #431 Bright White
Colour chart
MH00006

Micanan Shaft Collar 3/8" I.D

H503L5-RH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 208/230-460V VAC 3 Ph Logic 5 Right Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
2806.139*170

Whiting .139 x 2-3/16 x 17" L Roadside with Cones

  • For Curbside order part # 2807.139.170
2807.139*170

Whiting .139 x 2-3/16 x 17" L Curbside with Cones

  • For Roadside order part # 2806.139.170
COLLAR004

Manaras Collar 5/8"

OSH-6232-ECB-LH

Manaras Opera-SH 1/2 HP 208V 3 Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation Manual
.363-334-L

Cut-to-Length Torsion Spring .362 x 3-3/4" Left Hand Wound Green/White

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-375-INSTALLED
K1D8388-1CC

LiftMaster Main Control Board Linear Actuators for UL325

  • This replacement board is compatible with the following models: LA500U LA400U LA412U
  • Same as 001D8388-1CC
  • Sticker on board references 001D9040-1CC
VWS-34-WHITE

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box White

  • Pan head
  • S point
TRACK-SET-2LH-138

2" Tracks Set 7'-0" Low Headroom Torsion 1-3/8" Door Clips for Wood Frame 12" Radius *** By quote only

VWS-34-BRONZE

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Bronze

  • Pan head
  • S point
VWS-34-GOLD-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Gold Oak *** NLA - USE MEDIUM OAK

  • Pan head
VWS-34-MED-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Medium Oak

  • Pan head
VWS-34-DARK-BRWN

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Dark Commercial Brown

  • Pan head
  • S point
VWS-34-BLACK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Black

  • Pan head
  • S point
BRACKET111

Manaras Hood Mount Angle Bracket

2650-112-11

Linear Cold Weather Package HSLG 230V

  • Factory Option 2650-112-11 Cold Weather Package for 230-volt HSLG
  • Package includes: Arctic Oil Heater Cogged Belt
  • This factory option is only available for purchase when buying your gate operator.
HSLG-221

Linear Commercial Slide Gate Operator 1/2 HP 230V 1 Ph - Heater not Included

  • Max gate size: 35 ft 1000 lbs
  • Max duty cycle: Continuous
  • Integral APeX Controller
  • Double V-belt to chain reduction
  • #40 roller chain
  • Emergency manual disconnect handle
    • .......more details
FMB01DW24

Timer Multifunction 11-Pin

  • Carlo Gavazzi multi-function timer
  • Time range 0.05 s to 300 h
  • Knob selection of time range
  • Knob adjustable time setting
  • Knob selection of operating mode (6 functions): A - delay on operate B - symmetrical recycler OFF first B2 - symmetrical recycler ON first C - signal ON/OFF delay D - delay on release E - interval
  • Manual start
    • .......more details
41C5548

LiftMaster Wiring Harness Kit Low Voltage

  • For use with various LiftMaster® and Chamberlain® Garage Door Openers
8280.96

Whiting Aluminum U-Channel 96-5/8 IN Dry Freight

  • An original Whiting product
  • Use with Whiting seal # 5735.96
PRO-J-5083-U

Micanan 1/2HP 208V 3P Jackshaft Monitored ECB N1 Eyes Universal Mount

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
DM18VL-T/FORCE

Cable Drum Vertical Lift 18' D1100-216-1 Pair Torque Force

  • 18' Vertical Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x2" hardened cup point set screws installed with red heads.
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
  • Max. Door Height: 18'-1".
  • Rated Lift per Drum: 660 lbs.
  • Max. Cable Diameter: 3/16".
    • .......more details
.207-3-8.25-LHW

Mini Storage Spring .207 x 3" x 8.25" long Left Hand

BI-004

Astragal Bottom Cloth Black PVC Sold by the Foot

MP-00002-575V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

  • Controlling action of two lights- sockets supplied on cover
V5001-DARK-OAK

Replacement Vinyl Only for 5001-DOD Sold per Foot

PRO-HHD-7581U-L

Micanan 3/4HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 3/4 HP208V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation Manual (EN)Specification Sheet
PRO-HHD-7581U-R

Micanan 3/4HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 3/4 HP208V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation Manual (EN)Specification Sheet
27089A

Genie Washer

  • Drive shaft washer for PMX500
PRO-APTB-7511-U

Micanan 3/4HP 115V 1P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

  • Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
  • Low clearance design for apartment applications (9.5")
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema-1
  • Solenoid brake installed
  • Door speed 12" per second
    • .......more details
22000

Doorlec Enclosure EEMAC 12 and 4 1 Hole 22MM

  • Works with selector switch #22016 (sold separately)
BL229-EX1929/G45

Automatic Systems Rising Barrier Gate with 14'9" Round Arm Left Hand

26CW94523-CUT

Truck Door Intermediate Panel (13" x Cut-to-Size) Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
PRO-HB-7511U-LH

Micanan 3/4HP 115V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
MM00019

Micanan Disconnect Arm PRO-LJ