Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
PS31L-NS11R1M00

Carlo Gavazzi Utility Switch

  • Switch DPST-NO/NC Chassis Mount
  • Actuator Type: Side Rotary Adjustable Roller
  • Termination Style: Screw Terminal
  • Ingress Protection: IP66 - Dust Tight Water Resistant
  • Switch Function: On-Mom Off-Mom
  • Current Rating (Amps): 5.5A (AC) 2.8A (DC)
    • .......more details
Installation Manual
.273-134-L

Cut-to-Length Torsion Spring .273 x 1-3/4" Left Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
21-3260-1

LiftMaster Transformer 50/60Hz 60va 120/208/240/480V

  • 120/208/240/480V PRIMARY 24V SECONDARY
10FT-RAIL-CHAIN

LiftMaster 10' chain drive rail 1710LMC - colour code: Red

  • #48 chain size
  • Price reflects cost if purchased with an opener
41A5021-1ATS

LiftMaster Circuit Board Assembly (41A5021-1HATS)

  • Board: Security+ 390 MHz
  • Assembly includes: circuit board and end panel
  • Also includes: 1 Multi-Function wall ctrl panel - 2 wire
  • For: ATS211 & ATS211R
  • For newer model ATS use replacement board 41A5021-9G-315
  • Same as 041A5021-1HATS
    • .......more details
7001-14-W/B

Commercial Side & Top Weather-Strip 14' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
CR2016

Maxcell 3V Lithium Button Cell

ME113-R

Miller Edge Black Right Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
    • .......more details
Installation ManualWorksheetSell Sheet
TUBE_SHAFT_10FT

Hollow Shaft 1" x 10'-10" Galvanized 16 gauge

  • When ordering order one foot longer that actual door width
.306_6"-LH

Torsion Spring .306 x 6" x 12ft LH Red

  • Wire size: .306
  • Inside diameter: 6"
  • Length: 12 ft
.375_5-1/4"-LH

Torsion Spring .375 x 5-1/4" x 12ft LH Yellow/Green

  • Wire size: .375
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.283_3-3/4"-LH

Torsion Spring .283 x 3-3/4" x 12ft LH White

  • Wire size: .283
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.250_1-3/4"-LH

Torsion Spring .250 x 1-3/4" x 12ft LH Green

  • Wire size: .250
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.192_1-3/4"-LH

Torsion Spring .192 x 1-3/4" x 12ft LH Silver

  • Wire size: .192
  • Inside diameter: 1-3/4"
  • Length: 12 ft
LSGUN

Loop Sealant Gun for Quart Sized (32oz) Tubes

  • Caulking gun for LSBLK / LSGRY
41A5483-4C

LiftMaster Circuit Board Assembly *** To Extent of Inventory

  • Assembly includes: circuit board end panel and light socket
  • For belt drive units
  • Fits 2280 2580 WD822K(s) WD922K WD912K(S)
  • Also known as 41A5483-4 41A5483-4B
41A4252-7G

LiftMaster Circuit Board Assembly **Discontinued

  • Assembly includes: Circuit board end panel and light socket
  • Features Billion Code 390MHz technology
  • For chain drive units with one light
  • Fits 1240 1245 1246 1255 1256 215WD & 315WD
12-10029

Flanged Bearing 3/4" x 1-1/4" x 5/8"

30B363

Capacitor Motor Start 53 uF - 64 uF 220V *** No Longer Available

R-831-E

FL-Allstar 1-Door O/C/S Receiver 110554-311 MHz

  • Commercial Open/Stop/Close receiver for one door.
  • If your operator can be controlled by three button station then the R-831-E receiver and commercial remote controls will work with your operator.
  • It is easy to set with its learn feature (no coding switch).
  • This receiver can accept up to 8 different operational codes.
  • Manufacturer's model number: 190-110554
  • Dimensions: 6 1/4" x 3 5/8" x 1 3/4"
    • .......more details
Programming Instructions
19-41HL

Half Link #41

  • Half link for #41 chain
  • ANSI Standard Carbon Steel
CAM005

Manaras Limit Cam 5/8-18 UNF

  • Limit cam for Mountshaft009
  • 2 cam's required per shaft
41DJ001

LiftMaster Circuit Board with Plate for 3800 3900 41DJ001B

  • Board: Security+ 315 MHz
  • For jackshaft models; 3800 3800P 3800PLD & 3900
  • Also known as 41DB001-2
Programming InstructionsInstructions de programmation
.319_6"-RH

Torsion Spring .319 x 6" x 12ft RH Blue/Green

  • Wire size: .319
  • Inside diameter: 6"
  • Length: 12 ft
.421_3-3/4"-RH

Torsion Spring .421 x 3-3/4" x 12ft RH Gold

  • Wire size: .421
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.343_3-3/4"-RH

Torsion Spring .343 x 3-3/4" x 12ft RH Blue/Red

  • Wire size: .343
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.331_3-3/4"-RH

Torsion Spring .331 x 3-3/4" x 12ft RH Red/White

  • Wire size: .331
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.262_3-3/4"-RH

Torsion Spring .262 x 3-3/4" x 12ft RH Red/Yellow

  • Wire size: .262
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.262_2-5/8"-RH

Torsion Spring .262 x 2-5/8" x 12ft RH Red/Yellow

  • Wire size: .262
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.273_2"-RH

Torsion Spring .273 x 2" x 12ft RH Orange/Red

  • Wire size: .273
  • Inside diameter: 2"
  • Length: 12 ft
.262_2"-RH

Torsion Spring .262 x 2" x 12ft RH Red/Yellow

  • Wire size: .262
  • Inside diameter: 2"
  • Length: 12 ft
.225_2"-RH

Torsion Spring .225 x 2" x 12ft RH Orange/Green

  • Wire size: .225
  • Inside diameter: 2"
  • Length: 12 ft
MK00488

Micanan Electronic Circuit Board Monitored

  • Replacement board for PRO-LH (50-11)
  • Board has terminals P1 & P2
  • Up to 20 transmitters can be programmed
Instructions Manual
T3B-DS

Lynx 3-btn Transmitter Dip Switch 303 MHz

  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • 3-buttons provides control for 3 Lynx operators
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Will work with Lynx residential operators built from 2000 and up.
    • .......more details
Compatibility chart
CP-CRG-OLD

Lynx Auto Re-Connect Carriage 20-1/2" Arm Sold Separately *** Discontinued

  • Will work on most brands of commercial trolley operators using 2" angle tracks.
CP-SW-HOIST

Lynx Interlock Switch

H14G06

Hinge #6 x 14 gauge ** To extent of Inventory

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #6 position
  • Use between sections 6 and 7
  • Same as part number 246
    • .......more details
H14G03

Hinge #3 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #3 position
  • Use between sections 3 and 4
  • Same as part number 243
    • .......more details
VBELT_4L360

Manaras VBelt 4L 36" - repl. by A34

  • Used on MJ / MJH models
  • New belt type A replaces old 4L360. Part number VBELTA34
VBELT_5L350

Manaras VBelt 5L 35" - repl. by B32

  • Used on MTH MTBH MSL models
  • Type B
  • Inside length 32 inches
TIMER031

Manaras Timer 24/240V 1s-100h *** To Extent of Inventory

  • This timer-to-close can be added to any Commercial garage door opener.
  • Use with RELAY022 (8-pin base) if required.
  • Schneider Elect. part no. RE88867215
Adding a timer
DOORARM001

Manaras Door Lifting Arm Assembly

  • Complete door arm assembly for all Manaras trolley operators.
RADIO-47

Manaras MCT-1 3-btn O/C/S transmitter 1 door **Replaced by RADIO-EM932

  • Open/Close/Stop remote for 1 door
  • Comes with LED battery life indicator
  • 9V battery included
  • Can be wall or post mounted
  • Must be used with MCR series receivers
Programming Instructions
7470.115

Whiting Side Seal for insulated doors 115" Long

  • Fits Coldsaver and Tempguard
1920

Whiting Top Closure Mounting Plate for Insulated Doors

MCT-2

Linear 2-btn MegaCode Visor Transmitter 318 MHz

  • Activates two 318MHz MegaCode receivers independently
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery incl.
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 2.16" W x 3.75" H x .95" D
    • .......more details
Programming Instructions
GRD

Linear 1-Channel Delta3 Gate Receiver 310 MHz (DNR00101) ***Discontinued

  • Auto voltage sensing - no jumpers to set
  • Single Form ”A” (normally open) relay rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 256 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
8833T-OCS

Allstar 3-btn 1-Door O/C/S Transmitter 109372 318 MHz *** To Extent of Inventory

  • Open/Close/Stop remote for 1 door
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
Programming Instructions
MCT-11

Linear 1-btn MegaCode Transmitter 318 MHz

  • Activates one 318 MHz MegaCode receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Two CR2032 batteries included
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 3" W x 1.875" H x .625" D
    • .......more details
Programming Instructions
217436

Linear Drive Sprocket - Chain (HCT)

HAE00023

Linear 7ft Belt & Inner Slide Assembly (HBT7)

HAE00022

Linear Inner Slide Assembly - Belt (HBT)

219109

Capacitor 1/3 HP 43-53 MFD 250V

  • For LDO33 only
232168

Capacitor 3/4 HP 220V 65 MFD

  • For LCO75 only
4003-6FT

Aluminum Retainer only for Light Brush 6' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
4001-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
1003-4"-200FT

Bottom U-Rubber 4" Black 200' Long

  • 200ft spool of vinyl insert.
1006-1-1/2-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1006-1-1/2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1003-1-3/8-10'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
1104-16FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 16' Long - Brown (N)

  • Brown rigid vinyl retainer with brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
HSC-600-B

Bench Swager 1/16" - 3/16"

  • Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
  • Wire rope cutting capacity 3/16”
  • Made in Japan
BLOCK-RED

Spring Repair Blocks .3750-.4305 Pair

  • For the temporary repair of a broken spring.
  • Wire size: .3750 - .4305
BLOCK-BLUE

Spring Repair Blocks .2187-.3065 Pair

  • For the temporary repair of a broken spring.
  • Wire size: .2187 - .3065
9001-24FT

Commercial Side & Top PVC Weather-Strip Clip-On 24' Long

  • Grey rigid vinyl retianer with black flexible vinyl.
  • Reverse angle clip-on vinyl retainer.
  • Clips onto side of rolling steel door.
  • Clips overtop of 1/4" angle.
1106-24-BLACK

Commercial Side & Top Weather-Strip 24' Long - Black

  • Aluminum retainer with black dual fin vinyl
25-42-150

Extension Spring 7' Door - 150 lbs Red

  • Double - Loop
  • 25" long 42" stretch 150 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
25-42-60

Extension Spring 7' Door - 60 lbs Brown

  • Double - Loop
  • 25" long 42" stretch 60 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
91-00402

Truck Door Rib Neck Carriage Bolt 1/4"-20 x 1.25" (9/16" head)

  • Zinc plated finish
  • Use rib neck carriage bolts with lock and keeper assemblies and hinge installations
  • Rib neck carriage bolt allows tamper proof installation with a rivet lock and eliminates the nut being installed externally for security.
91-00400

Truck Door Step Bolt 1/4"-20 x 1.25" (3/4" head)- Sold Per Piece

  • Zinc plated finish
  • Cross Reference: T #80015-1610 120250
28-32072

Truck Door 2" Horizontal Track with 8" Radius 107" Curbside (RH) for Whiting Roll-Up Doors

  • SPECS: Length: 107" Fits door sizes: Up to 96" high
  • Cross Reference: W #11-2
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
  • 8" radius
  • For use with 2" diameter steel or nylon rollers
    • .......more details
28-02101

Truck Door 2" Vertical Track and Right Angle Assembly 106.5" Roadside (LH) for Whiting Roll-Up Doors

  • SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
  • Assembly includes: Right angle mounting track Vertical track and Torsion bracket
  • Cross Reference: W #2275-2
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
27-24202

Truck Door Single Torsion Spring Assembly 98/60 for Toco Roll-Up Doors

  • Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
  • Shaft Length: 98" Spring Length: 60" Wire Size: .243
  • Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
  • Springs treated with rust preventative
  • Heavy .243 dia. spring wire
  • Heavy-duty cast aluminum cable drums hold up to 130" of cable
    • .......more details
27-20307

Truck Door Balancer Bracket End - Roadside for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Cross Reference: W # 2524 for # 2376 balancer
27-20301

Truck Door Cable Drum Curbside (RH) for Todco Roll-Up Doors

  • Cast aluminum construction
  • Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines left or right drum.
  • Holds up to 130" door cable
  • Cross Reference: T #59033-1 T #59129-1 W #4013 330100
27-20202

Truck Door Winding Cone for Dual Spring Assembly for Whiting Roll-Up Doors (2-3/16")

  • Zinc die cast construction.
  • Universal design that will work for both Curbside (RH) and Roadside (LH) wound springs.
  • Cross Reference: W #2518
  • 2-3/16" I.D.
26-94325

Truck Door Bottom Panel with Seal (15" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
26-14521

Truck Door Intermediate Panel (11" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
25-10578

Truck Door Handle Keeper Only for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish.
  • Keeper accomodates padlocks and trailer seals
  • Cross Reference: W #7515
DM120

Cable Drum High Lift 120" 5750-120 Pair

  • 120" High Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
  • Maximum high lift: 120".
  • Maximum door height: 144" + High Lift.
  • Rated lift per drum: 500 lbs.
    • .......more details
DM32-125

Cable Drum Standard Lift 32' 800-32 (1-1/4") Pair Torque Force

  • 32 ft Standard lift aluminum die cast alloy cable drums for 1-1/4" shaft.
  • Pair includes (1) LH & (1) RH. Color coded: Red=LH and Black=RH.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Maximum Door Height: 32'-1".
  • Rated Lift per Drum: 1000 lbs.
  • Max Cable Diameter: 1/4".
    • .......more details
SF200

Spring Fitting 2" Pair

  • Unviversal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding and (1) stationary.
  • Maximum wire size diameter: .3065".
  • Set screw installed: 3/8"-16 x 1" (2).
  • Mounting: 1" tube or solid shaft
  • Winding bar hole 1/2"
    • .......more details
H11G07

Hinge #7 x 11 gauge

  • 11 gauge # 7 hinge - 0.83 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
EP2979

Exhaust Port 3" with latch long barrel

  • For use on insulated door panels up to 2" thick.
  • Inside diameter: 3" Includes fasteners & gaskets.
  • Polished aluminum finish.
903024ORBG

Operator Reinforced Bracket 24" Galvanized

  • Comes with clevis & clip pins. 12 per carton.
25-10275

Truck Door Universal End Hinge Flush Mount

  • Steel construction Zinc plated finish
  • Eliminates routing of panels for easier installation.
  • Removable cover allows roller change without hinge removal
  • Includes: Hinge roller cover & kep nuts
  • Cross Reference: H-325716
25-10103

Truck Door 2" Sealed Roller Steel for Whiting Roll-Up Doors

  • Zinc plated finish 10 roller ball design
  • Shaft Length: 2.62" Overall Length: 3.41"
25-01439

Truck Door 1/8" Stainless 5/16" Eye 115" for Roll-Up Doors Sold per Pair

  • Works with both Whiting and Todco doors
  • Aluminum eye ends are used on 5/16" eye cables
  • Cable size: 1/8"
6X16PO50

Devanco Loop 6' x 16' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
4X33PO50

Devanco Loop 4' x 33' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
CADROLL

3" Stainless Steel Carwash Roller 7" Stem ** To Extent of Inventory

  • Stainless Steel Shaft no bearing design
  • Roller made from NMW plastic which is more wear resistant that steel because it causes less friction
  • Rated for 200 000 cycles
  • Pound Load: 145 lbs
BCSI-PM03

Pivin Drapeau Hex Bolt 5/8-18 *** Price by Quote Only

AIRSWITCH016

Fraba Air Wave Switch Only

  • Fraba air switch only
37845R

Genie Screw Drive Carriage Assembly

  • Compatible with the following models: GPower 900 TriloG 1200 TriloG 1500 PowerMax 1200 PowerMax 1500
  • Works with Screw Drive Shuttle assembly part # 36664R - sold seperately
25E10003

Truck Door Roller Cover for End Hinge Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Cross Reference: W #1208 T #70161
K75-18493

LiftMaster Chain Guide Kit

  • Compatible with SL575 SL585 SL595 SL595U SL595UL and IHSL
  • Kit includes chain guide retainers and bracket for guide holders
OGH-6235-ECB

Manaras 1-1/2 HP 208V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
10FT-I-BEAM

LiftMaster 10' chain drive rail 3710CH / CD1010

  • I-Beam chain rail for 3595 & ATS
  • Space required: 2" above heighest point of travel of the door
12562

Doorlec Lower Brake Shoe - Left

  • Fits on all Doorlec operators equipped with brake shoes
  • Use with drum #12561
26-94525

Truck Door Intermediate Panel (15" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish