Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
K75-10259

LiftMaster Track Spacer Assembly

  • Standard duty trolley operator part
CS303-DB100

EMX Car Sense Direct Burial Sensor with 100 ft Lead Wire *** Replaced by LRS-DB-100

  • Can be used for above ground applications ie.. strapped to a post or wall
  • Easy low cost installation
  • Small size of the detector allow for easy installation in pavement
  • Rugged sensor is also suitable for above grade installations
  • Includes direct burial sensor and 100 ft of lead wire
  • Advanced 3-axis technology for better detection
    • .......more details
BOLT027

Manaras Hex Bolt 3/8-16 x 1-1/2"

  • Used on old MJH
3950-41DS

LiftMaster Dead-Shaft Sprocket Kit for 3950

  • Used on doors without live shafts
  • Same as 41A7280
  • Includes #41 chain sprocket
Sell sheet
4X20PO50

Devanco Loop 4' x 20' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation instructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
XT2563-00-W

Xcluder Rodent Block 3" Black 75' Reel

  • For commercial and residential applications
  • Creates a tough barrier that is virtually impenetrable to rodents
Sell Sheet
MB-02002

Micanan Electric Motor Only 3/4HP 110/220V 1PH TEFC

  • Base mount motor fits: TW TBW JW HW HHDW SDW
124773

Roller 3" UHMW 7-1/4" Stem Rubber

  • 3" UHMW tire covered with rubber
  • 6202 sealed precision bearing
  • 7-1/4" zinc plated stem
  • Rating: 200lb load; 10000 cycles of a 12' door
  • Helps quiet the operation of jackshaft operators
.362-278-27-LHW

Cut-to-Length Torsion Spring .362 x 2-7/8 x 27" Left Hand Wound

  • No cones
  • Inside diameter 2-7/8" or 2.875
CPS3CARD

LiftMaster Option Card Only (41K0811)

  • Works with all commercial Logic versions L2 L3 L4 L5
  • Use with CPS-U to add a second set of eyes to the operator
  • Allows activation of Timer-To-Close without CPS-U
  • Simply plugs into Logic board
  • Cut resistors on JU1 & R16 to activate timer feature
  • Same as 041K0811
    • .......more details
TL-50ML-BLUE

Threadlocker Blue 36ML *** Price by Quote

  • Medium strength
  • This product cures fully in 24 hours and can be dissembled with hand tools.
  • This product is an anaerobic adhesive applied by drops to the threads of fasteners. It then cures to a hard thermoset plastic that locks the threads together.
  • For metal to metal applications only
V3564-00-W-200

Vinyl Seal 4" Bottom Bead End Grey 200' Spool

  • Bead diameter 3/16" - 7/32" +/- tolerance
ME123-M-BLK-END

Miller Edge Black End 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
LDM-1

Long Distance Module

  • Compatible with all door and gate operators that use 24V AC
  • 20 mile range
26CW94325

Truck Door Bottom Panel with Seal (15" x 98") Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes only with bottom retainer and seal (installed)
    • .......more details
BK020/PR

Commercial 2" Safety Bottom Bracket Sold as a Pair (L & R) *** No Longer Available

  • Maximum cable diameter: 3/16"
  • Maximum door weight: 1300 lbs Zinc
  • Plated Steel
  • Sold as a pair
02-108

Push Button Station 3-btn O/C/S Flush Mount Stainless Steel Faceplate

  • Nema 1
  • Standard 2X4 electrical junction box with stainless steel faceplate
  • OPEN/CLOSE/STOP allows complete control of the door
MHS5011U-LH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

  • Designed for use on rolling sheet doors.
  • It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
  • Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
  • Floor level disconnect
  • 24V NEC Class 2
  • Wiring is factory present to C2 mode
    • .......more details
Installation manualSell sheet
50180

Doorlec Brake Assembly 120V

19-5114-NP

LiftMaster Trolley Roller Chain Pack #41 for 14ft Door Nickel Plated

  • For 3/4 & 1 HP trolley operators
MU22-2WIRE-E-Y

Miller Edge MU22 2-Wire End Yellow - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
7220355

FAAC 400 Front Fitting

PRO-APTB-5011-R

Micanan 1/2HP 115V 1P Apartment Trolley Operator With Brake Contactor

  • Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
  • Low clearance design for apartment applications (9.5")
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema-1
  • Solenoid brake installed
  • Door speed 12" per second
    • .......more details
Installation manualSpecification sheet
MGS20-B-2U-06

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 6ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
MGS20-Y-2U-04

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 4ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
PRO-HBH-7523U-L

Micanan 3/4HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

  • 3/4 HP230V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
053156

Magnetic Mount Micro Dome Beacon Amber ** To Extent of Inventory

  • 60 LEDs 360 degree revolving flash / intermittent flash
  • -30 degree celsius to + 50 degree celsius extreme temperature reliability
102079

Flange Plate PFL6Z PFL206

  • 2 required per bearing # 101475
41A2770-17

LiftMaster Hardware Kit for 8550 8160W

  • Universal Hardware bag for LiftMaster 8550 8160W Operator.
ST-PROFILE

Soft Touch Profile Sold per Foot

  • Yellow air-wave edge
  • Fits most standard 1-5/8" retainers
  • 300 feet in a roll
ST-ENDCAP

Soft Touch End Caps Sold Individually

VBELT_5L340

VBelt 5L 34"

  • Fits Lynx HDC operator
OPH-6532-CONT-R

Manaras Opera-H 1/2HP 600V 3Ph Contactor Model Right Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
Installation ManualSell Sheet
ZT36640159

Rolling Steel Door Model 702 Firestar No 2 Slat 22-Ga

ME111-2L-T2

Miller Edge Black Left Hand Outlet Monitored 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •10K ohm resistor •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
    • .......more details
Installation ManualWorksheetSell Sheet
ME111-R

Miller Edge Black Right Hand Outlet 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
    • .......more details
Installation ManualWorksheetSell Sheet
20456R

Genie Pulley Support Kit *** No Longer Available

  • Front metal clip with pulley
  • Front idler for use with Genie and Overhead Door T-rail systems
ME111-L

Miller Edge Black Left Hand Outlet 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
    • .......more details
Installation ManualWorksheetSell Sheet
CP-LX740

Lynx 3-btn Transmitter 372 MHz for Commercial Op. with UL325 Board

  • UL325
  • Works on the new Lynx commercial operators
  • For 3 doors
  • Not compatible with the new 372HMz residential operators
Programming instructionsCompatibility chart
RA-AD-T3

Lynx 3-btn Transmitter AD455 372 MHz

  • UL325
  • Works on the new Lynx operators
  • For 3 doors
Programming InstructionsCompatibility chart
1005-1-1/2-10'

Aluminum Bottom Retainer U-Shaped 10' Long

  • For door thickness 1-1/2"
K-MALED-HDWCB

LiftMaster LED Barrier Arm Hardware Kit

  • Service kit to connect new LED arm to existing barrier gate
  • Includes bolts 3" (2) nylon nuts (2) washers (2) 1/2" watertight connector 48" extension cable for breakaway connector "Y" cable and 12 Vdc power supply
072017.0001.S

Overhead Travel Nut for RCH

  • Teflon travel nut
22306

Programmable 7-Day / 24 Hr Timer

MARED12

LiftMaster Red LED Light Stip 9.9ft Long ** Discontinued

  • Provides LED visibility on both sides to 12 ft. arm.
MDT-4B

Linear 5-Channel Visor Transmitter MegaCode Block Coded 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Unique ”Extra” top button
  • High visibility operate LED
  • Visor clip included
  • Sold in lots of 10
    • .......more details
Programming instructions
.250-334-R

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Green

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
MG00021

Micanan Flat Washer 7/8" ID x 1-1/8" OD

11-10705

LiftMaster Output Shaft MH

15-19478

LiftMaster Sprocket Assembly

  • For model H (2005-present)
  • 48B32T with hub
9150000622

5/32" Sleeve ONLY 100/pkg

  • Sleeves only 100 per pack
RDGRNCARD

LiftMaster Warning Device Option Board with Red/Green Light Box

  • The Red/Green warning light card flashes a warning light for 10 seconds prior to the Timer to Close activating the door to close.
  • Advanced warning of the door closing helps prevent traffic collisions with the door
  • Controls both 24V & 110V traffic lights
Installation Manual
MK-00157

Micanan Intrinsically Safe Modification (Safepack)

  • Modification available for add-on to certain models only
D6375-164-125

Cable Drum High Lift 164" 1-1/4" Bore Torque Force Pair

  • Maximum hi-lift: 164"
  • Capacity: 800 lbs per drum
  • Cable length: Floor to shaft center 181" minus amount of Hi-Lift
  • Cross reference: DNS 410-164 OMI 164HL M162-4165
D6375-164

Cable Drum High Lift 164" 1" Bore Torque Force Pair

  • Maximum hi-lift: 164"
  • Capacity: 800 lbs per drum
  • Cable length: Floor to shaft center 181" minus amount of Hi-Lift
  • Cross reference: DNS 410-164 OMI 164HL M162-4165
71-B1PH

LiftMaster Internal Brake Kit w/Solenoid 120/240V 1PH for L5 Operators

  • Works with Logic 5 commercial operators and SL585/SL595 U and UL gate operators
24-MAG-STRAP

Magnetic Hinge Strap 24" Black Set of 4

  • Decorative hinge strap only.
  • Black flexible magnetic material with deep embossed design
T114

Manaras Trolley Track 14ft for 3/4HP & All APT models up-charge *Actual length 198"*

  • For models MGT/OTH/OTBH 3/4 hp only with Chain #41
29-ABC-15

LiftMaster Fuse 15A

  • For VSL595 gate operator
1104-ASFT-10FT

Elton Aluminum Stiffener for 1104 10ft

  • Prevents the 1104 from buckling in the hot sun
25-2015

LiftMaster 15 Amp Overload Fuse

  • For models: SL585-100-11 SL595-100-11 SL575-100-11
HDC-411-RH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Right Hand

  • 1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
  • Solid state circuit board Lynx-6000. Built in 1.5 second delay.
  • 5L V-belt primary reduction #50 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Precision pillow block bearings on output shaft.
  • Fully driven adjustable limit switches.
    • .......more details
Sell Sheet
26-40039

Truck Door Offset U-Channel Seal Retainer 98" Long for Whiting DryFreight Doors *** Obsolete

  • Aluminum extrusion construction.
  • Retainer is offset to allow header clearence with seal when door is in open position.
  • For use with offset bottom seal #26-40045
MAW123-BLK-LH

Miller Edge Air-Wave Edge Black Sold per Foot

  • This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
  • When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
  • It has been designed to fit most doors with double track bottom retainers.
  • With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
  • The MAW123 is resistant to flame water and most common greases and oils.
MA024

LiftMaster Round Aluminum Arm Yellow/Black Stripes 12ft ***NLA Repl. by MA024RDOT

  • For use on Mega-Arm gate operator
  • Replacement part MA024RDOT
CONTACTOR043

Manaras Reversing Contactor Allen Bradley 16A-24VAC

  • AB #100-C16*10
MH00009

Micanan Flange Bearing 1" ID x 2" OD

  • 2 required per operator
MO00001

Micanan Cam Plate Compression Spring (.178 ID)

  • 2 required per operator
  • .178 ID x 032G x 55L)
2235.296-CUT

Whiting Coldsaver Bottom Panel 14-1/2" x 94-3/4" with lock Topcoat Long Pull Strap & SS package

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
  • Includes Lock and keeper
4011-6FT

Aluminum Retainer only for Light Brush or Vinyl Insert 6' Long 90 degree ** To extent of Inventory. *** Sold in 12ft Lengths Only

  • For angle application - 90 degree
  • For use with Light Brush or Vinyl Insert.
  • For applications that require both brush and vinyl
GH4416-07-L

Green Hinge #7 12-ga Left Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-06-L

Green Hinge #6 12-ga Left Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-04-L

Green Hinge #4 12-ga Left Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-04-R

Green Hinge #4 12-ga Right Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
K-LA400

LiftMaster Primary Replacement Arm Service Kit for LA400 Original Silver Arm

  • Replacement arm only - no stripes old style
737

Fasteners Round Head Carriage Bolt 3/8-16 x 3/4" 1000/Box

  • Gr. 5 Zinc
K23-19380

LiftMaster Reset Switch for LA400

IG2-K10-30

Invisi-Guard-2 Photo Eye Kit 30ft Battery Powered *** Discontinued

  • The Invisi-Guard-2 thru beam photo optic system sends an invisible beam of light from a transmitting unit to a receiving unit.
  • The light beam is intended to function as a protective line guarding a potentially hazardous zone.
  • When the light beam is interrupted by an obstruction a signal is sent to the motor controls to stop or reverse motion
  • Universal Design Works with Pre and Post 2010 Operators
  • Spans Distances up to 30 feet (model dependent)
  • Time Saving Installation
    • .......more details
Installation ManualSell Sheet
1104-8'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 8' Long - Dark Sandstone (DDG)

  • Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
41A5507-B

LiftMaster Receiver Logic Board for 2500 (390 Mhz) ** Discontinued

  • With end-panel
  • Also known as 41A5507 41A5507B
27-48-200

Extension Spring 8' Door - 200 lbs Tan

  • Single - Loop
  • 27" long 48" stretch 200 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-130

Extension Spring 8' Door - 130 lbs Yellow

  • Single - Loop
  • 27" long 48" stretch 130 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-140

Extension Spring 8' Door - 140 lbs Blue

  • Single - Loop
  • 27" long 48" stretch 140 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
17S

Rolling Steel 2" Flat Stamped Steel Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
ME120-BLK-E-4FT

Miller Edge 2-Wire Black End Outlet 4 ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualSell Sheet
MOTOR255-WIRED

Manaras Electric Motor 3/4HP 120/240V 1PH Wired

  • Electric motor comes pre-wired for a brake
  • Must specify if operator has electronic circuit board or if it is hard-wired •This item is compatible with BRAKE011
MP-00024

Micanan Auxiliary Chain Disconnect for Pro-T TB

  • Allows for operation of a door by an auxiliary chain hoist.
  • Hoist mechanism is coupled to front end of drawbar
  • MUST specify door width and position of hoist (left or right)
9003-9FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle Bolt On 9' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
71-10345

LiftMaster RPM Sensor Board (MT only)

75-10359

LiftMaster Brake Pad

  • same as K75-10359
  • For MJ / HMJ and MT / BMT operators
H753L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 208/230/460V 3P Logic 5 Left Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
M003

Rolling Steel Groove Mouth GM679

B025

Rolling Steel Assembled Angles 2" x 2"x 3/16" Sold per Foot

  • Includes angles astragal and 1/2 slat
285547

Rolling Steel Aluminum Transition Piece Sold per Foot

17J

Rolling Steel 2" Flat Cast Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
2JW-D064

Rolling Steel 2" Curved Cast Windlock

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
70.13

Truck Door U-Bolt 1-1/4" long

  • Zinc plated finish
  • Used to attach cables to Whiting doors
SLT14-22

Rolling Steel 3" Flat Slat 22-ga Galvanized

SLT17-22

Rolling Steel 2" Flat Slat 22-ga Galvanized

340.115-CUT

Whiting Top Panel Tongue & Groove 11-1/2" h Cut to Exact Length

  • Primer only
  • Customer to specify exact length