Devanco Canada - Get The Right Garage Door Opener‎ and Parts

12-4164

Flange Mount Bearing Self-Aligning

Works with SL575 SL580 SL585 SW470.SW470 gate operator
Same as K12-4164 124164

.289_3-3/4"-RH

Torsion Spring .289 x 3-3/4" x 12ft RH

Wire size: .289
Inside diameter: 3-3/4"
Length: 12 ft

M-0131

Autogate Proximity (Limit) Switch

M-0133

Autogate Proximity Magnets

HSC-BOLT-3002

Replacement Center Bolt for HSC-600 Swager Sold Individually

Replacement bolt only (1)

02-406-2

LiftMaster Key Set Qty 2

Replacement Key ONLY for 02-406 2006-2015 #1 or #1502M

02-406-3

LiftMaster Key Set Qty 2

Replacement Key ONLY for 02-406 station
Keys for 02-406 2015 To Present #301 x 2

MF00003

Micanan R.H. Phillips Machine Screw 4-40 UNCx1-1/2

crew to hold double limits

C-24X10-134-W

Thermal Window 24" x 10" for 1-3/4" Door White

For 1-3/4" thick door

K75-19978-R

LiftMaster Frame Plate Kit Right Hand Disconnect

For use with various LiftMaster® Hoist and Jackshaft Commercial Door Operators

26117

Doorlec Limit Cam Retainer Plate

Fits Most Doorlec Commercial operators except Explosion-Proof Operators
Will not fit on waterproof operators with small electrical enclosure built before 1999

21001

Limit Switch Micro

27-83190

Truck Door W-Style Track and Operator 90 x 90 Door

Includes: 1 dual spring operator 2 horizontal tracks 2 vertical tracks

MG020-B-4E-P/FT

Miller Edge Sensing Edge Black 4-Wire Monitored End Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

RADIO-RE901B

Manaras Open/Stop/Close 24V receiver Nema 4/12 313 MHz

Wall mount
Fixed code / Dip switch technology
Commercial reciever( Learn button) 1-door
16 Fixed codes / Receiver
Nema 4/12
Approx 100' range

.......more details

Z9206

Door Track Anvil

Used as a pounding block to hammer mangled track back into shape
For 2" track

PL-A21-RPM-WHEEL

Lynx RPM Reader Wheel

MD-00338

Sprocket 40B15 1" Bore 1/4" KW 2SS

15 tooth sprocket for #40 chain

K75-36260

LiftMaster Lock and Keys

For various Liftmaster commercial slide and swing gate operators.

60-6560-C-YELLOW

Speed Bump Yellow 36" Econo Light Weight for Concrete *** NLA

A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
Main pieces may be added and connected to form larger units.
36” long x 10.5” wide x 2” high (main piece)
EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.

.......more details

103-T-8X10-VL

Hardware Set 3" Industrial 103-T for 8' x 10' VL

A variety of options and sizes are available call for quote
Set includes tracks HD rollers hinges solid shaft drums cables springs and struts if applicable.

RP-MTR-AO-RSL-12

Lynx Electric Motor AO RSL 1/2 hp 120V ** NLA

For residential opener MRE

CB1805000-KOR

Cable 1/8" 7x19 5000' Galvanized Supreme ** Price on request

Galvanized Cable 1/8" 7x19 5000ft spool.
Cable break strength: 2000 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Stainless Steel Cable Specifications

4004-10FT

Aluminum Retainer only for Heavy Brush 10' Long 45 degree ** To extent of inventory

For angle application (45 degree)
For use with Heavy Brush

Q076

LiftMaster Turn Buckle Kit K75-50132

For Liftmaster trolley operator HCT

JB-02P-W

Miller Edge Junction Box Nema 4

For use with commercial door operators and CPT sensing edges from Miller Edge
Waterproof
Accommodates wire .181 to .312

Installation instructions

029C98100

T-Style Complete Replacement Door White Stainless Steel Package 029C98100

Complete Replacement door size between 98" wide x 100" high
Painted white
Stainless steel package
Includes Vertical and Horizontal Track Operator assembly Hinges Rollers and Cable
Price varies according to size

1209

Whiting Roller Hinge Complete

050DCJCWFSD

LiftMaster Receiver Logic Board DC. WiFi CJO Sectional for LJ8900W

050DCJCWFSD is a 315MHz Security+ 2.0® Receiver Logic Board featuring Wi-Fi® with myQ® technology.
For use with various LiftMaster® Light-Duty Series Jackshaft Door Operators for sectional doors; manufactured after 2018.
The unit will feature a yellow learn button.

41D8198

LiftMaster End Panel with all Labels and Light Socket

End panel works with various models

MM00026

Micanan Cut-Out Sw. Activation Plate Gearhead (MSI0042)

31118

Doorlec Sprocket 41B12-5/8" Plain Bore

Plain bore no keyway

K76-36681

Liftmaster Replacement Antenna for STAR1000

This is an antenna replacement kit for the PPWR & STAR 1000

MB-01012

Micanan Electric Motor for Pro LH only 1/2HP 575V 3PH

This will only work in the Pro LH operator.

K1D8424-1CC

LiftMaster Power Board 3 Ph SL585U/SL595U

For use with LiftMaster® SL585U & SL595U Series; and various 3 Phase Commercial Slide Gate Operator Models.

RSW-R

Fraba DW-RS-200 Receiver Only 433MHz

the receiver is built into a Nema 4 case
Housing: Small (75x40x13 mm / 2.95x1.57x0.51")

CP100C

Coupler Specialty Coated 1" Bore

Coated with 1000 plus hr salt spray rated finish
1" Bore with 1/4" keyway
Malleable iron for high strength and resistance to shock loading
Coupler halves separates and is adjustable
4-(3/8"-16 x 1" square head set screws installed
Rust inhibitor coating

.......more details

7205

Whiting Balancer Bracket End - Roadside for Whiting Roll-Up Doors for #7176 Balancer

Steel construction
Plain finish
Whiting original

SHAFT120

Manaras Input Shaft for OSHW

41A3473

LiftMaster Chain and Cable Kit 7'

Also known as: 65410 41A3473
One piece 7 ft. chain and cable replacement kit installed on 7ft garage door

41C2760

LiftMaster Chain and Cable Kit 8'

Also known as: 1C2760 41C2760 41C2760-1
One piece 8 ft. chain and cable replacement kit installed on 8ft garage door

K20-1100-1T

LiftMaster Electric Motor 1/2 HP 115V 1Ph TEFC **DISCONTINUED

Compatible with LiftMaster® Model SW490GL Swing Gate Operators
Also known as: 20-1100-1T 2011001T G2011001T

H7NA12

Richards-Wilcox Hinge 7NA x 12 Gauge Roller Bracket

Galvanized 12 gauge hinge

AM-DPR

Linear Dual Proximity Reader

Compatible with most Wiegand formats up to 40 bits
Weather resistant and vandal resistant
4 to 6 inch read range
Supports up to 65000 cards
Easy to install
Integral LED confirms when user access is granted

.......more details

HINGE-1214-PCG

Powdercoated Hinge #1/2 x 14 gauge Grey ** To Extent of Inventory

Heavy Duty 14 gauge offset hinge #1/2
Powdercoated Grey

ME120-BLK-2WIRE-L

Miller Edge Black 2-Wire NM Left Hand Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

RBH105L5-RH

LiftMaster 1 HP 575 VAC 3 PH Comm. Hoist Op. Logic 5 Right Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

111502.0002

Overhead Electric Motor RHX 3/4hp 115V Single Phase

7-2240

Richards-Wilcox 3" Roller 7/16" Shaft Dia x 9" Long Shaft Super 3 *** Call for Availability

Original Richards-Wilcox part

7-2239

Richards-Wilcox 3" Roller 7/16" Shaft Dia x 5" Shaft Length Super 3 *** Call for Availability

Original Richards-Wilcox part
Roller diameter is 3" good for a 3-1/4" track
14 Ball

A22KITSKB

Erone Web-Based IP 2-Door Controller A22 w/SOLARKPB Kit *** No longer sold as a kit

Atrium 2-Door Controller Kit Web Based IP Hybrid
Module Embedded Web Server Includes 2 SOLAR Keypad/Reader Software
Pre-assembled universal plug-in power supply (120V/240V) included
Convert any A22 door controller to an A22EC elevator controller by simply updating the firmware for free (up to 256 floors)
On-board Ethernet Port with AES 256-bit encryption
Auto-detect hardware modules Quick and easy card enrollment procedure

.......more details

Installation Manual Wireless System Chart

K081C0168

LiftMaster Screw Drive Rack

Also known as: 081C0168 81C168
This replacement screw drive rack is not compatible with LiftMaster® Models 3130 or 3240

SF514-S

Spring Fitting 5-1/4" Stationary Side Only for 1" & 1-1/4" shaft

Can be used with either 1" or 1-1/4" winding cones
Includes: (1) stationary side only.
2 x 3/8-16 thread holes at CC=4.25"

MIRCU-02

Miller Edge Universal Non-Monitored Interface

Converts a monitored pulsed signal to a non-monitored normally open signal
Creates a Fail Safe signal; reports a fault when power is lost
Ideal for use with pre-2010 commercial door operators

Installation instructions Sell sheet

4JW-LEFT

Rolling Steel 3" Curved Cast Windlock 273002 LH

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

K75-37549

LiftMaster Disconnect Kit for SL595U

Compatible with LiftMaster SL595UL heavy-duty vehicular slide gate operators
Allows manual operation of your gate operator

LMTBUL

LiftMaster Monitored Through Beam Photo Eye w/ Heater Nema 4X

Tested and evaluated by UL and meet UL 325 requirements.
Long Range powerful beam provides reliable performance.
Sensing distance up to 90 ft.
Anti-Fogging Lens
NEMA 4X rated
Wireless network mode eliminates the need to wire between operators in dual-gate applications.

.......more details

Installation manual Manuel d'installation Product guide

12502

Doorlec Clutch Plate Aluminum 4" dia x 5/8" bore

Works with model LJ/LJH

HAML-RCH-2030

GDI Direct Drive HC410 Nema 1 To Accept 1" Shaft; UL-325 Photo Eyes Extra

HD3120-BLACK

Commercial 3" Inside Slide Lock Black Powder Coated

Track use: 2" or 3"
Throw: 2.62"
Slide bar: 0.138"
Individually wrapped

H14G01-BLACK

Hinge #1 x 14 gauge Black Powder Coated

Black powder coated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
Individually wrapped

GBUP412EF-1

Gate Roller 4-1/2" x 2-3/8" Polymer Sold Individually

Polymer gate roller with bracket for 4-1/2" upright post
Works with gate pipes that are 2-3/8" thick or less

GBU312EF-1

Gate Roller 3-1/2" x 2-3/8" Galvanized Sold Individually

Galvanized gate roller with bracket for 3-1/2" upright post
Works with gate pipes that are 2-3/8" thick or less

GBU412EF-1

Gate Roller 4-1/2" x 2-3/8" Galvanized Sold Individually

Galvanized gate roller with bracket for 4-1/2" upright post
Works with gate pipes that are 2-3/8" thick or less

E/BLOP/151

Automatic Systems Safety Edge for BL229 16'-5"

RADIO-EM144

Manaras 144-Door Transmitter O/C/S 390 MHz

3-button O/C/S transmitter for144 Doors
LED Indicator Nema 1 Enclosure
Soft touch push buttons including a bright red stop button for easy identification
Compatible with Manaras Opera Rolling Code Series "100" Transmitters and receivers
Compatible with Manaras Operators equipped with Board 70 or external receiver Radio-RE901 and Radio-Kit004 & Radio-Kit005
Wall or Post mount

.......more details

Sell sheet

22010

Doorlec 1-22mm Cylinder Complete with Normally Open Contact Spring Return Includes 2 keys

328-729

Lip Shock Absorber Dock Leveler

Used to control descent of dock leveler lip
1/2" holes are 10.4" center compressed 16.25" when extended

SF375-W

Spring Fitting 3-3/4" Winding Side Only

Universal thread for use in either LH or RH wound springs.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
Winding bar hole 5/8"

LPWKP-G

Linear MegaCode Wireless Keypad 318 MHz Cool Grey **** Replaced by NMTK

Activates multiple MegaCode receivers
User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
Programming is easy via the keypad; MegaCode receiver auto-learns PIN
Backlit keys for easy viewing
Wall mounting hardware (2 screws and anchors) supplied
Power: Three AAA batteries

.......more details

41A7278

LiftMaster Sprocket Kit 12-Tooth

Includes sprocket and screws

GAL.262-258-144R

delete

GAL.262-258-144L

delete

111396.0004

Overhead Brake Kit Model H 1/2HP 1PH

Installation instructions

G-21X13-134-BLK

Thermal Window Clear 21" x 13" for 1-3/4" Garaga Door Black

For 1-3/4" thick door

SPRING001

Manaras Cam Guide Plate Spring

RBH505L5-RH

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 Right Hand ***NLA

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

26CW14522-CUT

Truck Door Intermediate Panel (12" x Cut-To-Size) Painted White for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

41A7618

LiftMaster End Panel with Battery Cover and Light Socket 8550W

2806.162.18

Whiting .162 x 2-3/16 x 18" Roadside with Cones

.192-2-R

Cut-to-Length Torsion Spring .192 x 2" Right Hand Wound Silver

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

M15A

Safety Inertia Brake 2" Bore 13727 Torque PCM15AP

Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
Fully resettable and reusable after lockout ocurrs.
Commonly paired with commercial safety bottom brackets in sectional door applications.
Fits 2" shaft
Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.

.......more details

Manual Technical data Sell sheet

2376.177*26.960

Whiting Torsion assembly .177 wire size 26" spring length 96" shaft

P-75

End Plug for 3/4" ID Rubber Hose

Sold per plug

P-75H

End Plug for 3/4" ID Rubber Air Hose w/ Center Hole Qty 1

Sold per plug

218-45-10

PVC Connector for 3/4" - 3/32" RAH

OGH-6534-CONT

Manaras 1 HP 600V 3Ph Gear Head Operator Contactor Model

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

UTIL025

Utility Limit Switch Telemecanique

Installation Manual

50442

Doorlec Mushroom Push-Button Red for 1-Door

Capable of opening one door
NEMA 4 Enclosure
non-lockable

LV-24-TL-RG

Narrow Lights for Loading Docks Red / Green LED 12-24VAC/DC 24-3/8" long Sold Individually

LED lights offer long-lasting reliable high-visibility in all weather conditions including direct sunlight with low power consumption.
Robust housing resists impact and corrosion.
Slim discrete design ensures little risk of damage due to accidental impact.
Wide input voltage range of 12-24Vac/dc (control box available for alternate voltages).
Boards coated in water-resistant polymer for optimal protection from water and humidity.
24 LEDs per guide light (12 Red 12 Green)

.......more details

DW-3S-300

Fraba Air Wave Switch Larger Housing with Copper End NOC

Fraba DW3S-300 air switch 10008797-2
Normally Open Contact (NOC)
Screw Type Connector
Dimensions: 158x60x39 mm (6.22" x 2.36" x 1.54 '')
Housing: ABS Switch: PA6V0 Nema4
Normally Closed Contact achieved by adjusting the sensitivity screw

.......more details

Operating Instructions

MT22-MON-GRY-LH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Gray Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty