Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MOTOR275

Manaras Electric Motor 1HP 208/460V 3PH

Continuous-duty base mount
This item is compatible with BRAKE011

MOTOR403

Manaras Electric Motor 1/2HP 120V 1PH

Instant reverse
Medium-duty 1500 rpm
For OMJ/OMH

ST-CLEAR-TUBE

Soft Touch Clear Tubing Sold per Foot

ME111-2L-T2

Miller Edge Black Left Hand Outlet Monitored 7/8" wide x 1-1/2" high Sold by the Foot

Slide in style edge for barrier gate and counter shutter application.
Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •10K ohm resistor •Temperature Range: -30F to 155F
Lead wire: AWM 22 gauge 2ft length
Sensitivity: nominal 6-8 PSI
Vertical or horizontal mount
ANSI/UL325 recognized component

.......more details

Installation Manual Worksheet Sell Sheet

RA-AD-WKP-10

Lynx 10-btn Wireless Keypad AD455 372 MHz

Compatibility chart

25-01434

Truck Door Stainless Cables 110" 1/4 nylon eye 7x19 Pair for Roll-Up Doors

Works with both Whiting and Todco doors
Nylon eye ends are used 1/4" and 7/16" eye cables
Cross Ref: W4020-1

DF104.2

Whiting Dry Freight Door 3/4" with Track Balancer and Standard Hardware

Standard features include: 2-cable balancer with independent springs
Balancer springs treated with rust preventative
All door hardware is E-coated
Spring loaded lock catch
Heavy-duty 2" 13-gauge track
Stainless steel aircraft cables

.......more details

MHN-SET-100

Magnetic House Number Set 5" Black Embossed 100 pcs

Flexible magnetic material with an embossed finish
100 piece contains ten each of numbers 0-9
Priced per box

MAREDLED17

LiftMaster Red LED Light Stip 13ft Long

Provides LED visibility on both sides to 17 ft. arm.

MARED12

LiftMaster Red LED Light Stip 9.9ft Long ** Discontinued

Provides LED visibility on both sides to 12 ft. arm.

MDT-4B

Linear 5-Channel Visor Transmitter MegaCode Block Coded 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Unique ”Extra” top button
High visibility operate LED
Visor clip included
Sold in lots of 10

.......more details

Programming instructions

MX00145

Micanan Brake Assembly for PRO-APT Solenoid NOT included ** DISC

Discontinued. Use part number MX00140

.363-6-L

Cut-to-Length Torsion Spring .362 x 6" Left Hand Wound Green/White

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

32-34792

LiftMaster Gear Reducer Nema 56C 30:1

Compatible with LiftMaster® Model SL585 Slide Gate Operators
Same as K32-34792

1003-4"-PER-FT

Bottom U-Rubber 4" Black Sold per Foot

R5995

Shaft Collar 1-1/4" Double Split

K72-19975

LiftMaster Clutch Shaft and Sprocket Assembly

Assembly includes: Clutch shaft 1" keyed flange bearings Dual sprcket 32/14 Splined core sprocket E-ring Compression spring Pulley assembly Washers Thrust bearing Retaining ring Slined hub and roll pin
Compatible with DJ J operators

.262-258-R

Cut-to-Length Torsion Spring .262 x 2-5/8" Right Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

CONTACTOR008

Reversing Contactor Struthers Dunn 115VAC

33106

Doorlec Overload 5.50 to 8.50A

.250-258-R

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

SPF514-6

Spring Filler 12 ft Long No Fins

For use with 5-1/4" or 6" torsion springs
Accomodates both 1" and 1-1/4" shaft size

BG790-50-11-HTC

LiftMaster Ind-Duty Wishbone Barrier Gate Op 1/2 HP 115V w/Arm Weight & Heater and TTC

A reliable gear-driven barrier gate operator that is perfect for industrial applications.
This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
Standard Features: Control inputs and Adjustable limit settings
02-102 Open/Close Push Button Included

Installation Manual Sell Sheet

1007-1-5/8-14

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

For door thickness of 1-5/8" to 1-3/4"

2'6X6SC50

Devanco Loop 2'6" x 6' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

111420.001.S

Overhead Cut-Off Switch for RSX Operator

Interlock switch for Overhead model RSX

Replacement Instructions

EL2000SS

LiftMaster Telephone Entry Access Control System Stainless Steel *** No Longer Available

A high-capacity telephone entry access control system designed to complement virtually any gated community.
It is flexible enough to be used in apartment buildings condo complexes office parks and commercial sites.
features a 5-inch backlit LCD screen and clearly displays up to 4 lines with 20 characters per line making it a great choice for multi-tenant installations
Entry Codes allow for 2000 4-digit codes to be programmed. The codes can be time-restricted and/or use restricted. The codes can be split up any way you choose; 500 directory codes 1000 card codes 500 entry codes for example •Transaction Monitoring stores a maximum of 8000 transactions including date time identification and transaction type.
Activity Reporting gives property managers the ability to print database system and history reports.
Call Forwarding and Do Not Disturb schedules can be programmed for every resident.

.......more details

Installation Manual Programming Instructions Instructions de programmation Sell Sheet

1005-2-8'

Aluminum Bottom Retainer U-Shaped 8' Long**Actual Length 8'1"**

For door thickness 2"

CB18A500-KOR

Cable 1/8" 7x7 500' Galvanized Supreme

Galvanized cable 1/8" 7x7 500ft spool.
A higher quality cable than the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

UNI-100-102

Uni-Size Bottom Weather Seal 10'2" Long *To extent of inventory*

Fits most standard doors 1-3/8" thru 2" thick
Pliable in all temperatures
Accepts pneumatic or electrical edge
15 pieces per box

.295-334-L

Cut-to-Length Torsion Spring .295 x 3-3/4" Left Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.295-258-L

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

.295-258-R

Cut-to-Length Torsion Spring .295 x 2-5/8" Right Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

361LMC

LiftMaster 1-btn Digital Transmitter 315MHz ***No Longer Available

9 dip switch 315MHz transmitter
Compatible with Commercial operators L3 & L4
Visor clip and battery included (GP23A)

Programming Instructions Instructions de programmation

1104-ASFT-10FT

Elton Aluminum Stiffener for 1104 10ft

Prevents the 1104 from buckling in the hot sun

T012

Manaras Trolley Track 12ft for 1/2HP models *Actual length 174"*

For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)

HSC-1000

Hand Swager 1/4" & 5/16"

Swages 1/4" and 5/16"
Made in Japan

HDC-411-RH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Right Hand

1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
Solid state circuit board Lynx-6000. Built in 1.5 second delay.
5L V-belt primary reduction #50 drive chain and sprockets.
Adjustable friction clutch magnetic solenoid brake.
Precision pillow block bearings on output shaft.
Fully driven adjustable limit switches.

.......more details

Sell Sheet

MD-00030

Roller Chain #40 10' per Pack

Includes (1x) master link

OVERLOAD002

Manaras Telemecanique Overload 3-ph 1.2 - 1.8A

Telemecanique # LR2K0307

MH00001

Micanan Bronze T-Bushing 3/8" ID

2 required per operator

414001

Linear 4-Channel Multi-Code Visor Transmitter 300 MHz

Compatible with 300 MHz Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches
Power: 9-volt battery
Codes: 512 codes for each channel (set by dip switches)
RF frequency: 300 MHz

.......more details

Installation Manual

37028G.S

Genie Circuit Board for Retail Model 1022 ** Repl. by 39537R.S (no cover)

Compatible with Genie 1022 1042 ChainLift 600 and QuietLift 600 models.
Purple

97-75003

DOT-C2 Reflective Tape 150 ft x 2" W 6" Red x 6" White Pattern

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

97-75000

DOT-C2 Reflective Tape 24" x 2" W 6" Red x 6" White Pattern

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

PEDALU42-HOOD

Aluminum Hood Only No Post for PEDALU42

Hood only No post
High quality aluminum
Boitier pied estau seulement en aluminum

Shop drawing

MK-00004

Micanan Travel Limit Switch

GH4416-02-L

Green Hinge #2 12-ga Left Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

PIN016

Manaras Coupling Pin 3/8" for MJH

4 required for MJH manufactured prior to 1998
2 required for MJH manufactured after 1998

IG2-K10-50

Invisi-Guard-2 Photo Eye Kit 50ft Battery Powered *** Discontinued

The Invisi-Guard-2 thru beam photo optic system sends an invisible beam of light from a transmitting unit to a receiving unit.
The light beam is intended to function as a protective line guarding a potentially hazardous zone.
When the light beam is interrupted by an obstruction a signal is sent to the motor controls to stop or reverse motion
Universal Design Works with Pre and Post 2010 Operators
Spans Distances up to 50 feet (model dependent)
Time Saving Installation

.......more details

Installation Manual Sell Sheet

MB-02102

Micanan Electric Motor Only 3/4HP 230/460V 3PH

Base mount motor fits: T TB APT J EJ H EHJ HHD SD

156871

Decorative Hinge Yorktown Style 16" Stamped Steel sold per piece

16" hinge strap only
Black stamped steel
Mounting hardware sold separately
Sold per piece

27-48-380

Extension Spring 8' Door - 380 lbs Gold

Single - Loop
27" long 48" stretch 380 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-200

Extension Spring 8' Door - 200 lbs Tan - Sold Each

Single - Loop
27" long 48" stretch 200 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-110

Extension Spring 8' Door - 110 lbs White

Single - Loop
27" long 48" stretch 110 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

42-8116-1

LiftMaster Terminal Block 16-Position

ME120-BLK-E-6FT

Miller Edge 2-Wire Black End Outlet 6 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

Installation Manual Sell Sheet

ME120-PC

Miller Edge Rigid PVC Mounting Channel Sold per Foot

15-3619

LiftMaster Sprocket 50B19T 1-1/4" x 1/4" 2-SS

ME120-BLK-E-5FT

Miller Edge 2-Wire Black End Outlet 5 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

Installation Manual Sell Sheet

MP00016

Micanan Up-Charge Track and #41 chain for 16' h Door *Actual length 222"*

For 3/4 HP and 1 HP operators only

9003-17FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 3" Track Bolt On 17' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

PRO-HB5011R-RH

Micanan 1/2HP 115V 1P Hoist Operator with Brake and Mechanical Contactor Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Includes solenoid brake

Installation manual Specification sheet

6X18SC50

Devanco Loop 6' x 18' Saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
Requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

K75-12492

LiftMaster Brake Kit 115V Units MH

E076

Rolling Steel Aluminum Bottom Bar 679 Extrusion Sold per Foot

2JW-D064

Rolling Steel 2" Curved Cast Windlock *** NLA

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

OEB-1

Super Sneaky Operator Extension Bracket

Improves installation safety
Extends operator rail travel length. Use a 7′ rail for 7’6" – 8′ tall doors
Saves extra 2" of headroom required by draw bar type operators
Pulls door clear of opening
Eliminates garage door overhang
Greatly increased installation ease & safety

.......more details

SLT4-18P

Rolling Steel 3" Crowned Slat 18-ga Primed

SLT17-22

Rolling Steel 2" Flat Slat 22-ga Galvanized

UN201

LiftMaster Thermostat Controlled 500-Watt Heater & fan for MAT Gate Operators and more

For temperatures below 32 F
Designed for use with Mega Arm Tower gate operator
Can be used for other applications as required
Heater operates when termperatures are below freezing
Plugs into a standard 120V outlet
500 Watts with a circulating fan

.......more details

Installation Manual

SOLID_SHAFT_21'

Solid Shaft 1" Keyed 21 ft Galvanized

Actual length is approx. 21'-1"

PL-B12-ARM-CURV

Lynx Curved Arm for Proline Operator

Used on Proline residential garage door openers

ST18COP

Copper Stop 1/8" 100 Stops per Pkg *price on request

Stops ONLY
Sleeves sold separately part # SL18COP

ST532COP

Copper Stop 5/32" 100 Stops per Pkg *price on request

Stops ONLY
Sleeves sold separately part # SL532COP

MOD035

Manaras Monitored Photocell Upgrade N1 to N4X

Ideal for industrial environments submersible and impact resistant.
Flexible design withstands and realigns after mechanical impact.
Max. range 45ft.
Incl. photoeyes 3ft of conductor wire and mounting hardware.
Applies to all operator models with electronic control "M" types.

44-60-240

Extension Spring 10' Door - 240 lbs Silver ** By Quote Only

Clipped ends
44" long 60" stretch 240 lb load

BK307

Jamb bracket J-07 #7 12 gauge

Sold by the piece
Height 3.75" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

SOLID_SHAFT_14'

Solid Shaft 1" Keyed 14 ft Galvanized

Actual length is approx. 14'-1"

71-EB1PH

LiftMaster Field Install Brake Kit 115/230V 1PH for L5 Operators Ext. Mount *** To extent of inventory

For operators already in the field without a brake
No longer available but drum brake upgrade available #K71-D1PH

Installation Manual

SEL2641R433K8PM

Erone 800 User Receiver 433MHz

Multi-user receiver
800 two-channel transmitters + 7 master transmitters
Includes 1 master transmitter S2TR2641E2M for programming
12/24V AC/DC
Option: PC software kit # SEL2641KITP8 sold separately
1 NO relay + 1 NO/NC relay

.......more details

Installation manual Wireless System Chart

9150000627

1/8" Stops ONLY 100/pkg

Stops only 100 per pack

MGR20-Y-2U-06

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet 6ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

Installation Manual Sell Sheet

801-300-002-01

Equinoxe Long Range Receiver 1-Door Industrial Enclosure 433 MHz New Generation

1000 ft range
2016+
This receiver will accept 8 Equinoxe O/C/S remotes
Nema 4

Programming Instructions Instructions de programmation

T753L5

LiftMaster 3/4 HP 208/230/460V 3P Commercial Trolley Operator Logic 5 ***No Longer Available

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

87-P-075

LiftMaster Turac 3/4" Push on Fastener

PULLEY020

Manaras Clutch Pulley 7" x 5/8"

Included in MOUNTSHAFT001 001A 007 011 and 014

OSH-6113-ECB-LH

Manaras Opera-SH 3/4HP 120V 1Ph with Electronic Circuit Board Left Hand *** To Extent of Inventory

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

Z9220

Pocket Style Res / Com Combo Spring Gauge

Includes wire sizes .1875 thru .5
Double saw-tooth leaves for easy wire measuring
Stainless steel
Includes belt sheath

33950R

Genie Up Limit Switch Assembly 66 " Wire

For use on 7'6" rail assemblies.
For Genie Excelerator models and Overhead Overdrive models
Open / Up magnetic limit switch

104100

FAAC Hydraulic Swing-Leaf Gate Operator S450H 24VDC

Hydraulic operator for residential and condominium swing gates with single-leaf max width of 3 m (SB) and 2 m (CBAC).

747

Fasteners Slotted Track Bolt 1/4-20 x 1" 1000/Box ** Unavailable

Knurled shank
Max torque = 6

803

Fasteners Sleeve Anchor 3/8" x 3" 50/Box

Secure anchoring into concrete brick or block

802

Fasteners Sleeve Anchor 3/8" x 1-7/8" 100/Box

Secure anchoring into concrete brick or block

GHX-6112-CONT-L

Manaras Explosion Proof Gear Head 1/2HP 120V Contactor Left Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station