Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
SOLID_SHAFT_13'

Solid Shaft 1" Keyed 13 ft Galvanized

  • Actual length is approx. 13'-1"
K74-34821

LiftMaster Reset Switch

  • Complete with reset button and mounting bracket
346

Cable Clamps Galvanized 3/16" Sold per piece

  • Galvanized malleable cable clip
2650-112-06

Linear Cold Weather Package 230V SLR gate Op. Only

  • Cold weather package includes: Arctic oil Heater Cogged V-belt
41A5021-5I

LiftMaster Electronic Circuit Board Assembly 390MHz *** No Longer Available

  • 1 piece logic board with end panel
  • Used on 390Mhz Security+ AC belt drive operators made from 1997 to 2005.
  • Unit will have a red/orange learn button
  • Also know as 41A5021-D 41A5021-5E 41A5021-5F 41A5021-5G 41A5021-5H 041A5021-5I
SLR-221

Linear Residential Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

  • Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
  • Continuous-tone entrapment alarm with reset button
  • LED diagnostic display for ease of setup and troubleshooting
  • Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
  • Regulated 24 Volt DC power available for access control accessories
  • Integrated maximum run and auto close timer (0-9 minutes)
    • .......more details
7001-16-CHARCOL

Commercial Side & Top Weather-Strip 16' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
37313

Doorlec Relay Flat Pins 2 Pole 24V

GAREX-REPL-PANL

Garex Replacement Panel Special Order

  • Ordered to customer's exact requirements for size and color
  • Pls call for pricing
AKR-1

Linear Exterior Digital Keypad with Radio (ACP00747) *** No Longer Available

  • Self-contained keyless entry system ideal for airports hospitals warehouses office buildings parking lots and many other commercial facilities
  • Built-in radio receiver
  • Rugged cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestal
  • Four independent outputs and timers: two form C relays and two solid-state open collector outputs with unique programming per entry code
  • Accepts 480 entry codes 480 block code transmitters plus one fully supervised Model MGT safety edge transmitter
  • Two LED indicators show system status
    • .......more details
5001-10-BLACK

Residential Side & Top Weather-Strip 10' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
1104-12'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 12' Long - Light Bronze (F) **NLA

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
K12-8034

LiftMaster Female Rod End LH

  • Upper rod end for BG770 BG790
  • Same as part # 12-8034
60-7238

Wheel Chock Tie Back Chain 15 ft Long 3/16" Galvanized w/ Quick Links

  • One tie back chain only
HTR-460

LiftMaster Heater Kit for AC Pad Mount Gate Operators 460V Only

  • Heater kit for pad mount 460V AC gate operators.
  • Includes transformer
  • Battery bracket NOT included.
  • Protects system to -40° F and installs on operator frame
PRO-H-7511U-RH

Micanan 3/4HP 115V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
Installation manualSpecification sheet
Q085

LiftMaster Dolly Cover HCT K09-50756

  • Same as K09-50756
28-00290

Truck Door 1" Std Vert. Track and Angle Assbly Roadside (LH) 96.5" Todco Style

  • For Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes J-style channel mounting angle with track and operator bracket
  • For door opening less than 90" high
  • Fits door sizes 72 - 90" high
  • Cross ref: T #49014-2 T #41034-2 & W #4045
    • .......more details
28-00190

Truck Door 1" Std Vert. Track and Angle Assbly Curbside (RH) 96.5" Todco Style

  • Fits Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes J-style channel mounting angle with track and operator bracket
  • For door opening less than 90" high
  • Fits door sizes 72 - 90" high
  • Cross ref: T #49014-1 T #41034-1 & W #4046
    • .......more details
41ACOM12001

LiftMaster Capacitor 32UF 230V **DISCONTINUED

20-8100M-DC

LiftMaster Electric Motor for VSL 1 HP 90 VDC 1 ph

  • Replacement electric motor for VSL gate op.
IRB-RX

EMX Industries Receiver Board Only for IRB-4X *** No Longer Available

PBTL3-RED

Replacement Button Only - N/C Stop Red

  • Stop switch and rubber cover for PBTL-3
K75-10259

LiftMaster Track Spacer Assembly

  • Standard duty trolley operator part
36451A

Genie Front Idler Assembly 36451A.S *** No Longer Available

  • Works on ReliaG 800 2022 2024 2042 ReliaG 600 ChainLift BeltLift 1022 1024 and 1042 Series Units
EH5761-A19

Automatic Systems Round Arm Assembly BL27 14'-9 (4.5M)

  • French description: Ensemble Lisse Ronde 4.5m (14'-9")
  • For model BL27 gate operator
28020024-500

Cable Stainless 3/8" 1x19 500' Inox ** Price on request

  • Not for use in aircraft applications
  • 1x19 contruction type 302 / 304
Comparison charts
82-SB50-08

LiftMaster Shoulder Bolt 3/8"-16x8 **DISCONTINUED

  • Shoulder Bolt
  • For SW470-S3
  • Formerly 82SB5008 G82SB5008
LDM-1

Long Distance Module

  • Compatible with all door and gate operators that use 24V AC
  • 20 mile range
Q400E-HCT

LiftMaster Control Board HCT

  • Replaced Q400D-HCT
MHS5011U-LH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

  • Designed for use on rolling sheet doors.
  • It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
  • Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
  • Floor level disconnect
  • 24V NEC Class 2
  • Wiring is factory present to C2 mode
    • .......more details
Installation manualSell sheet
19-5118-NP

LiftMaster Trolley Roller Chain Pack #41 for 18ft Door Nickel Plated

  • For 3/4 & 1 HP trolley operators
ZT37028235

Firestar Shutter 540 Galv with Lock & Key

7220355

FAAC 400 Front Fitting

7119405

FAAC 400 Plug for End Cap

65-52091-16

LiftMaster Manual Hoist Mod. M8 #41 Chain for 16ft High Door

  • For 3/4 Hp & 1 Hp Trolley operators
  • Includes floor level brake release cable 1" x 12' round bar.
MGS20-Y-2L-05

Miller Edge Sensing Edge Square Yellow 2-Wire Left Hand Outlet 5ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
PRO-TB-7523-U

Micanan 3/4HP 230V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
MD00045

Micanan Spur Gear 12B72-1

41A4813

LiftMaster Chain Pulley Bracket Kit

  • Fits chain drive models
CP-BRG-58

Lynx Bearing 5/8"

  • 6 in total on a MCJH
CLUTCH-ASY-MCJH

Lynx Complete Clutch Shaft Assembly for MCJH Operators 5/8" x 12-1/2"

.306-6-R

Cut-to-Length Torsion Spring .306 x 6" Right Hand Wound Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
28773A

Genie Idler Pulley for Belt Drive

  • Fits PMX500-I B/C Belt & Chain drive model
  • Front Pulley for belt channel applications only.
  • Compatible with the Ovehead Door Legacy BELT DRIVE (model #696 and #496) and Phantom (model #777) garage door opener
  • Part Numbers: 28773 28773AS 28773S 38773A
H105L5-LH

LiftMaster Ind. Duty Hoist Op. 1 HP 575 VAC 3 Ph Logic 5 Left Hand W/Brake

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'installationSell sheetBrochure
1003-6.5-PER-FT

Bottom U-Rubber 6.5" Black Sold per Foot

MOUNTSHAFT010

Manaras Hoist Shaft Kit for MJH (pre-1998)

Drawing
EQ2722

SkyLink 3/4 HP Garage Door Opener with 2 2-Btn Keychain Remotes ** Discontinued

  • The DC motor offers additional benefits with very quiet operation and much less vibration.
  • It is ideal for garage doors that are below a living room or bedroom.
  • The DC motor also offers the soft start soft stop features which reduces the vibration and wear and tear of all the mechanical parts
  • Features: Rolling Code Technology Soft Start Soft Stop Optimal Force Learnings and Safety Beam Sensors.
  • Available in either Belt or Chain drive
  • Includes two 2-btn keychain remotes # MK318-2
    • .......more details
Installation ManualSell Sheet
CPT-210-50

Miller Edge Bulk Extrusion 50 ft Roll

  • For do-it-yourself edges on sectional or rolling doors.
  • Black
  • End plugs adhesive and mounting channel sold separately.
  • Sensing edge size: 1-5/8"H x 1-3/4"W
  • When combined with the ME123 mounting channel it can be installed on doors measuring 1-1/2" to 2" thick.
Installation ManualSell Sheet
7001-WG-16-MO

Residential Wood Grain Side & Top W/S Medium Oak 16' Long - Painted Screws to Match

  • Medium Oak retainer with Medium Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
7001-WG-10-MO

Residential Wood Grain Side & Top W/S Medium Oak 10' Long - Painted Screws to Match

  • Medium Oak retainer with Medium Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
7001-WG-9-MO

Residential Wood Grain Side & Top W/S Medium Oak 9' Long - Painted Screws to Match

  • Medium Oak retainer with Medium Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
7001-WG-9-DO

Residential Wood Grain Side & Top W/S Dark Oak 9' Long - Painted Screws to Match

  • Dark Oak retainer with Dark Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
7001-WG-7-DO

Residential Wood Grain Side & Top W/S Dark Oak 7' Long - Painted Screws to Match

  • Dark Oak retainer with Dark Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
BP-BE102BP

Contact Block Base Mount NC Contact

  • For use with RC P enclosures. IP65
TC134-14

Top Cap 1-3/4" 14 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
TC134-16

Top Cap 1-3/4" 16 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
TC134-9

Top Cap 1-3/4" 9 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
14-1004

PVC Roll 8" x .080 Standard Clear Smooth 300' for Replacement Strip Curtain

  • Suitable for most average applications.
  • Temperature Range: -20°F to 150°F (-28° C to 66° C).
  • Formulated with ingredients that meet USDA requirements for incidental food contact.
CB3160500-KOR

Cable 3/16" 7x19 500' Galvanized Supreme

  • Galvanized cable 3/16" 7x19 500ft spool.
  • Cable break strength: 4200 lbs
  • A higher quality cable compared to the Chinese cable
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
CB5320500-KOR

Cable 5/32" 7x19 500' Galvanized Supreme

  • Galvanized cable 5/32" 7x19 500ft spool.
  • Cable break strength: 2800 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
HTRKITRSW

LiftMaster Self-Regulating Heater and Coil for RSW12V **DISCONTINUED

  • Protects system to -40F.
  • Installs into the operator frame
  • 120V
.295-134-R

Cut-to-Length Torsion Spring .295 x 1-3/4" Right Hand Wound Blue

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
24-MAG-STRAP

Magnetic Hinge Strap 24" Black Set of 4

  • Decorative hinge strap only.
  • Black flexible magnetic material with deep embossed design
T114

Manaras Trolley Track 14ft for 3/4HP & All APT models up-charge *Actual length 198"*

  • For models MGT/OTH/OTBH 3/4 hp only with Chain #41
GUIDE014

Manaras Chain Guide

39-10541

LiftMaster Clutch Disc for SL595 (K39-10541)

HSCC112

Hinge Combination Hinge Clopay Style 12-ga Stainless Steel

  • Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
  • Laser Cut for a Clean Finish
10-1000-14FT

Strip Curtain 14' x 48" Angle Mount - 8" LT PVC - 4" O.L Clear

  • 14 ft wide x 48" high
  • Mounting bar sold separately
97-75004

DOT-C2 Reflective Tape 150 ft x 2" W 11" White x 7" Red Pattern

  • DOT-C2 certified exceeds NHTSA requirements
  • Highly reflective even up to a 90 degree angle
  • Quick and easy to apply
GH4416-08-L

Green Hinge #8 12-ga Left Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-07-L

Green Hinge #7 12-ga Left Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-02-R

Green Hinge #2 12-ga Right Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
ME123-CA3

Miller Edge L-Shaped Aluminum Mounting Channel Sold by the Foot

K23-19380

LiftMaster Reset Switch for LA400

RS10311

Roller 3" Steel 11" stem 10 ball

  • Steel Roller Wheel diameter: 3"
MX00034-460V

Micanan Brake Assembly for PRO-HHD with 460V Solenoid

  • Complete brake assembly including 460V solenoid
  • Solenoid cover is sold separately # MM00011
1104-8'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 8' Long - Dark Sandstone (DDG)

  • Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
9372054125

Square Torsion Spring .343 x 5-1/4 x 41.25" with Cones LHW

  • 41.25" long = 160 coils
H12G03-SS

Hinge #3 x 12 gauge Stainless Steel **NLA

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
K77-36541

LiftMaster Antenna

  • For various gate operators
MP00017

Micanan Up-Charge Track and #410 (#48) chain for 18' h Door *Actual length 246"*

  • For 1/3 HP and 1/2 HP operators only
MP00018

Micanan Up-Charge Track and #41 chain for 18' h Door *Actual length 246"*

  • For 3/4 HP and 1 HP operators only
SN1600341-K

LiftMaster Sentex Bypass PCB for TAC1 EL25

  • BY PASS Board for 1150051
  • Same as KSN1600341B
5X20SC50

Devanco Loop 5' x 20' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
K72-12487

LiftMaster Limit Shaft Kit MT BMT MJ mechanical operators

  • For models MT BMT MJ mechanical operators
  • Includes limit shaft bearings limit nut sprocket. RPM sensor roll pin & e-ring
WKP5LM3

LiftMaster Wireless Keypad 5-Code ** Replaced by KPW5

  • Wireless access control keypad
  • Same features as WKP250LM3
  • 5 code capacity - 4-digit codes
  • 2-way design with confirmation beep
  • 900MHz
Programming Instructions
17J

Rolling Steel 2" Flat Cast Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
SLT14-22P

Rolling Steel 3" Flat Slat 22-ga Primed

340.115-CUT

Whiting Top Panel Tongue & Groove 11-1/2" h Cut to Exact Length

  • Primer only
  • Customer to specify exact length
342.115

Whiting Intermediate Panel Tongue & Groove 11-1/2" x 96" Price on Request

  • Standard size panel primer only
GH203-L5

LiftMaster Gearhead with Brake 2 HP 208/230/460V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
ST316COP

Copper Stop 3/16" 100 Stops per Pkg *price on request

  • Stops ONLY
  • Sleeves sold separately part # SL316COP
MK00650

Micanan UPCHARGE for N-4 Photocells in Lieu of Nema-1 Reduction for N1 Included. **Obsolete Repl by MK00697

  • In lieu on the standard Nema-1 photocells supplied with the operator
Installation Manual
MK-00699

Micanan Weatherproof Thru-Beam Photocell 0-45 ft Range

  • This item has been discontinued by the supplier
41A5434-14

LiftMaster Full Belt Assembly for 10ft Door

  • For belt drive models: 2500 2580 2280 3500 3280 3280M 3850 8355 2585 3585 2500B & D
.187-2-L

Cut-to-Length Torsion Spring .187 x 2" Left Hand Wound

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
BK313

Jamb bracket J-13 #13 12 gauge

  • Sold by the piece
  • Height 5.25" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK301

Jamb bracket J-01 #1 12 gauge

  • Sold by the piece
  • Height 2.40" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
36605A

Genie Pulley Assembly Belt Drive *** No Longer Available

  • Genie 36605A PULLEY
  • For Belt Drive Models
  • For Chain lift Belt Lift ReliaG 600 & 800 1022 1024 1042 2022 2024 2042
  • Also for Overhead Door Models Legacy 800 & Standard Drive Belt