Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
02-108

Push Button Station 3-btn O/C/S Flush Mount Stainless Steel Faceplate

  • Nema 1
  • Standard 2X4 electrical junction box with stainless steel faceplate
  • OPEN/CLOSE/STOP allows complete control of the door
745266

Strobe Low Profile Amber LED Warning Light 12-24VDC

  • Fully encapsulated electronic circuitry ensures a lifetime of trouble-free operation.
  • Installer can select the flash pattern of each high intensity strobe by wiring the unit according to the flash rate preferred.
  • 4 7/8" X 5 7/8" Rubber base Surface mount 12-24VDC
9301644400

Galvanized Torsion Spring .306 x 3-3/4 x 44" L with Cones RHW

ST-ENDCAP

Soft Touch End Caps Sold Individually

BMBOX-HARDWARE

Complete Hardware Box for Big-Metro BMBOX

  • Foundation box for Big-Metro gate operator
  • Kit includes: (1) #60 – PMD1025.4610 – MECHANICAL STOP BOLT NUT (1) #62 – V12X30.5102 – BOLT MECHANICAL STOP (1) #63 – D12B/5110 – NUT MECHANICAL STOP (1) #61 – D18.5110 – NUT M18 (1) #52 - 5PMCS1.4630 – BALL BEARING (1) #58 – PPD2288.4540 – NYLON HINGE COVER (2) #65 – 16X1.5124 – SCREW FOR LID COVER (4) #64 – D.12.5110 – NUT M12 LOCK NYLON
EXA-2000

Linear Directional Antenna (AAE00331)

  • Compatible with all Linear receivers with Type F antenna connector
  • Receives signals in 288 to 320 MHz range
  • Directional remote antenna designed to enhance the radio range of Linear receivers
  • Includes 10 feet of coax
  • Clamp for mounting
  • Dimensions: 21” W x 5” H x 1.5” D
    • .......more details
26-942255

Truck Door Bottom Panel with Hardware (15.5" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Primer Finish
  • Comes with 18" pull strap assembly two bottom roller shaft covers and stud plates standard lift handle two u-bolts flexible PVC bottom seal and aluminum seal retainer.
    • .......more details
25E10050

Truck Door Center Hinge Black E-coat finish for Todco Roll-Up Doors

  • Steel construction Black E-coat finish
K75-34790

LiftMaster Disconnect Kit for SL585

  • Kit includes: Release lever bracket cable compression spring washer screws clevis pin bushings roll pin bolts nuts & handle
Installation Manual
K79-13493-2

LiftMaster Logic Board Replacement Kit FDCL

  • Replacement board for fire door model FDCL
CB18B0500-KOR

Cable 1/8" 7x19 500' Galvanized Supreme

  • Galvanized Cable 1/8" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
UNI-100-122

Uni-Size Bottom Weather Seal 12'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
UNI-100-102

Uni-Size Bottom Weather Seal 10'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
361LMC

LiftMaster 1-btn Digital Transmitter 315MHz ***No Longer Available

  • 9 dip switch 315MHz transmitter
  • Compatible with Commercial operators L3 & L4
  • Visor clip and battery included (GP23A)
Programming InstructionsInstructions de programmation
25-2015

LiftMaster 15 Amp Overload Fuse

  • For models: SL585-100-11 SL595-100-11 SL575-100-11
17-10336

LiftMaster Pulley 7.000"OD 3/4" Bore 4L-Belt

MAW123-BLK-RH

Miller Edge Air-Wave Edge Black Sold per Foot

  • This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
  • When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
  • It has been designed to fit most doors with double track bottom retainers.
  • With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
  • The MAW123 is resistant to flame water and most common greases and oils.
DXT-42

Linear 2-Btn 3-Channel Key Ring Transmitter *** Discontinued

  • Battery powered portable miniature transmitter designed for use with Linear’s DX Format receivers.
  • Each transmitter can be used in a limitless number of wireless remote control applications.
  • Pressing a transmitter button sends a digitally coded wireless signal to its companion receiver. The transmitter buttons have a positive click feel.
  • The digital DX code format features over a million possible codes.
  • The DX transmitters are precoded at the factory to unique codes so no field coding is required. Transmitters can send a signal for up to 10 seconds with each button activation.
  • Each button sends a unique code. Pressing both buttons together sends code three. Press button(s) for a minimum of two seconds to insure receiver activation.
    • .......more details
Installation Manual
VBELT_4L370

Manaras VBelt 4L 37"

  • Used on MJH models from 1980 - 2000
GH4416-06-R

Green Hinge #6 12-ga Right Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
RS10311

Roller 3" Steel 11" stem 10 ball

  • Steel Roller Wheel diameter: 3"
17S

Rolling Steel 2" Flat Stamped Steel Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
MOTOR255-WIRED

Manaras Electric Motor 3/4HP 120/240V 1PH Wired

  • Electric motor comes pre-wired for a brake
  • Must specify if operator has electronic circuit board or if it is hard-wired •This item is compatible with BRAKE011
K72-33872-1

LiftMaster Limit Switch Shaft Kit

  • For models MT BMT MJ MH and MHS logic control
  • Kit includes: limit shaft limit nuts limit bearings limit sprocket washers compression ring roll pin and e-ring
PRO-LH-5021U-LH

Micanan 1/2HP 230V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (PRO LHE)

  • Designed for use on commercial sectional doors with high or vertical lift
  • May also be used on small rolling grilles with max. 15 cycles per hour
  • Includes chain hoist
  • Includes solenoid brake
  • On board receiver with antenna
  • On-Board receiver holds up to 20 transmitters
    • .......more details
Installation manualSpecification sheet
K-LA500

LiftMaster Primary Replacement Arm Service Kit for LA500 Original Arm ** DISCONTINUED

  • Replacement arm only - no stripes old style
MWTA12

Miller Edge Transmitter with Audible Alarm Small *** No Longer Available

  • The MWTA12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes with an Audible Alarm feature that activates when the battery is running low and needs to be replaced.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided.
    • .......more details
Installation ManualSell Sheet
12-10715

LiftMaster Flanged Bearing 1" Keyed

GH203-L5

LiftMaster Gearhead with Brake 2 HP 208/230/460V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
.331-5-1/4-RH-C

Torsion Spring .331 x 5-1/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .331 ID: 5-1/4" Length: 12 ft
RN0039-SS

Roller 3" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 100000 cycles of a 12' door
  • Stem Length - 8.312" Overall Length - 9.25"
RN0029-SS

Roller 2" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 50000 cycles
CS202S-5-100

EMX Car Sense Vehicle Motion Detector ** Discontinued Offer VMD202 instead

  • Low voltage used for automatically opening gate when exiting property without requiring the use of a remote control transmitter key pad or any other operator control device.
  • Can be located up to 150' from the gate. Senses automobiles on a driveway up to 12' wide moving more than 5 m.p.h.
  • A second probe can be connected in parallel for additional coverage or for automatic opening in or out.
  • Available in a five wire (recommended for use with GTO operators) and a three wire version.
  • The CarSense 202 is buried in the ground so it will not be noticed by a potential intruder or vandals.
  • The CarSense 202 accepts a wide range of power input of 9 - 41 VDC and 6-29 VAC. The low current consumption of 250uA and 12mA detected make the CarSense 202 Slim a great choice for solar applications
    • .......more details
Installation ManualSell Sheet
.187-2-L

Cut-to-Length Torsion Spring .187 x 2" Left Hand Wound

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.187-2-R

Cut-to-Length Torsion Spring .187 x 2" Right Hand Wound

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
SOLID_SHAFT_17'

Solid Shaft 1" Keyed 17 ft Galvanized

  • Actual length is approx. 17'-1"
SOLID_SHAFT_12'

Solid Shaft 1" Keyed 12 ft Galvanized

  • Actual length is approx. 12'-1"
2200-030

Linear Limit Nut

  • Used on various Linear Gate operators
86-RP08-108

LiftMaster Roll Pin Long 1/4" x 1-1/8" Coiled 10/Pkg (K-SPLONG)

  • Same as K-SPLONG
OGH-6434-ECB

Manaras 1 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
AK-21W

Linear Exterior Digital Keypad *** No Longer Available

  • A digital keyless entry system designed for outdoor access control applications.
  • The keypad is housed in a rugged die-cast metal enclosure and is designed to be mounted in a standard single-gang electrical box.
  • The die-cast keys have bright easy-to-read yellow graphics.
  • Up to 480 entry codes from 1 to 6 digits in length can be programmed. They can activate either or both of the relay outputs.
  • Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for timed or latch-on/latch-off toggle operation per each individual entry code
Installation Manual
OHJ-6233-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 208V 3 Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
PPLK1-10

LiftMaster Passport Lite 1-Button Mini Remote with Sec+ 2.0 Technology 10/PKG

  • Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
  • These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
  • Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
  • Keychain remote control sold in a 10 pack
    • .......more details
Programming InstructionsInstructions de programmationSell SheetBrochure
Z9220

Pocket Style Res / Com Combo Spring Gauge

  • Includes wire sizes .1875 thru .5
  • Double saw-tooth leaves for easy wire measuring
  • Stainless steel
  • Includes belt sheath
MI00002

Micanan Pulley 8" OD c/w Bushing 3/4" ID

TCG-2

LiftMaster Tri-Code Commercial Receiver ** DISCONTINUED

  • Two channel commercial receiver compatible with Linear Delta Multi-Code and Stanley radios.
  • Six 3' wired leads
Installation Manual
MOD021A

Manaras Safepack 24V Control Circuit

  • A safepack module is used as an "Intrinsically Safe Barrier Relay" and in hazardous locations with non-voltage producing sensors allowing the user to use a N.O. non-monitored sensing edge.
831T

Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz 107483 *** To extent of inventory

  • Open/Close/Stop stationary remote for 1 door.
  • Designed for commercial automatic door and gate operator applications.
  • This transmitter can operate a single receiver connected to one operator
  • Compatible with 3-channel Allstar and MVP receivers
  • Easy access to battery and coding switch
  • Power: 9-volt battery
    • .......more details
Programming Instructions
MV-00297

Micanan Commercial Wireless Keyless Entry 372 MHz

  • Will work on Micanan commercial operators that have an on-board receiver
  • If there is no receiver then MK-00648 is required
  • Same as MV-00086
Programming instructionsInstructions de programmation
C-600-INSTALLED

Cones 6" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF600
7001-18-BLACK

Commercial Side & Top Weather-Strip 18' Long - Black (Code B)

  • Black galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black (B)

  • Black galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
767

Fasteners Lag Screw Hex Washer Regular Profile 1/4" x 1" 1000/Box ***NLA

  • 7/16" head
764

Fasteners Serrated Flange Nut 5/16-18 1000/Box

CBS-338

Center Bearing Support 3-3/8" 8-gauge with Bearing Sold per Piece

  • Heavier gauge allows for use in both 2" commercial or 3" industrial applications
  • Sold per piece
  • For 1" shaft
  • Double clipped ends
AELD

LiftMaster Elite Plug-In Loop Detector

  • For use with Omni Control board available on the Chamberlain commercial line.
Installation Manual
CAR2U-RPTR

LiftMaster Lear CAR2U Repeater *** No Longer Available

  • The Lear Car2U® repeater kit allows compatibility between new Chamberlain® Sears Craftsman® or LiftMaster® Garage Door Openers and the Car2U system in your vehicle. · The Car2U system is a garage door opener integrated into your vehicle. · The Lear Car2U kit contains a transmitter and a detailed instruction manual.
Programming Instructions
CH505L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 575 VAC 3 Ph Logic 5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
  • Comes with 02-403P NEMA 4 push button
Installation ManualManuel d'InstallationSell sheetBrochure
T014

Manaras Trolley Track 14ft for 1/2HP models up-charge *Actual length 198"*

  • For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)
9150000701

Safety Cable for Extension Spring 3/32" 7x7 10' Sold as a Pair

  • Looped on one end the other is raw (no stops)
  • Used to wrap around the body of an extension spring to contain the wire should the spring break.
CONSD24V

Reversing Contactor Struthers Dunn 24V

  • Struthers-Dunn # A275KXX90
Z3/Z5

Erone Z-Bracket for Maglock ** No Longer Available

  • For use on: 300-KG 400-KG and 500-KG electromagnetic locks
  • High quality aluminum construction
  • Dimensions: 175mm (long) x 50mm (wide) x 50.5mm (depth
Wireless System Chart
K72-19979

LiftMaster Clutch Shaft Kit 2005 +

  • Assembly includes: Clutch shaft keyed flange bearing dual sprocket 32/14 14-tooth sprocket E-ring compression sprocket chain wheel assembly pulley assembly chain guide assembly shim & thrust washers copper bushing 12-10882 and roll pins
K75-10177

LiftMaster Brake Hub Assembly

  • Assembly includes: Brake hub set screw push-on fastener and feather key
SG10B-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Black Housing

  • Red and Green LED traffic light
  • Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
  • 24 volt DC input voltage only
  • Long lasting low power consumption
  • A simple reliable and cost-effective way to reduce accidents around the loading dock.
  • Available in two colors: safety yellow or black.
    • .......more details
Installation InstructionsInstructions d'installationWiring DiagramSchéma de connexion
M3-2312

Marantec 2-Button Transmitter 315 MHz 97243/122436

  • Same as part # 65892 97243 122436
  • Includes battery CR2032
  • Made in Germany
Instructions
358.000-PANEL

Whiting Bottom Panel White Aluminum Clad

  • Comes complete with #77W Lock
  • Actual replacement for Intercontinental-Winnipeg s/n 51617
CB18A0500

Cable 1/8" 7x7 500' Galvanized

  • Galvanized cable 1/8" 7x7 500ft spool.
Comparison charts
MX00149

Micanan Complete Clutch Shaft Assembly for PRO-H

BK150/PR

Residential Bottom Bracket BB-100 sold as a pair

  • For use with 2" rollers
  • Works on 1-3/8" 1-1/2" 1-3/4" and 2" doors
  • 13 gauge residential bottom bracket that secures to the bottom of the door allowing the cable to be attached to the door for lifting
  • Same as part number 263
Q024

LiftMaster Limit Switch Assembly for SL3000 (K75-50097) *** To Extent of Inventory

  • Same as part number K75-50097
K29-32410

LiftMaster Alarm Kit for SL575/585/595

  • Kit includes Alarm Spacer and Faston
Installation Manual
41A7619-4

LiftMaster Cover for 8557

85LMC

LiftMaster Plug-In Power Supply

  • Plug-in jack for easy installation on Liftmaster receivers
  • Power input level: 105-135AC 24AC output
MS00003

Micanan Carriage for PRO-APT / T

  • For model PRO-APT / T
34299R

Genie Deluxe Wall Console Series II ** Discontinued Replaced by 39165R

  • Deluxe Wall Console for Genie Intellicode Series II only
  • 3 function console: operates door opener controls lights and security lock out switch
  • Compatible with Code Dodger
  • Same as previous part number: GPWC-2WLB
CPS-RPEN4

LiftMaster Monitored Retro-Reflective Photo Eye with Nema 4 Enclosure for Commercial Door Applications

Installation ManualManuel d'InstallationSell Sheet
.283-2-L

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
109020

Linear 1-Channel Multi-Code Receiver 300 MHz

  • Three tabs for universal mounting
  • One "NO" relay
  • Compatible with 10 dip- swith 300 MHz Multi-code transmitters
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
G3T-BX

Genie 3-btn Dual Frequency Transmitter 37218R

  • This transmitter replaces all Intellicode and Overhead Door Code Dodger transmitters made after 1997.
  • For Intellicode operators pre-1997 use GITR3 for best results
  • Operates with 315 & 390 MHz Intellicode 2 technology
  • Able to control up to 3 garage doors
  • Visor clip and battery CR2032 included
  • Replaces: GIT GIC90 GMIC90 G2T OCDT ACSCTG TBSTG GIT-1 GIT-2 GIT-3 ACSCTG Type 1 ACSCTG Type 2 ACSCTG Type 3 TBSTG GIC90-1 GMIC90-3 GIC90-2 GMIC-3BL GIC90-3 OCDT-1 OCDT-2 OCDT-3 G2T-1 G2T-2 G2T-3 GICTD-1 GICT390-1 GIFT390-1 GIT390-4
    • .......more details
Programming InstructionsInstructions de programmation
45ACT

LiftMaster Circuit Board

  • Board: Tri-band Security+ 2.0
  • AC Belt and Chain Drive models
  • Fits models LC500EVC HD420EVC PD622EVC
  • Same as 41D7675 1D7675 7675 45ACBL1 45ACBL2 45ACBL3 45ACBL4 45ACBL5 45ACCL1 45ACCL2 45ACCL3 45ACCL4 45ACCL5 45ACBR1 45ACBR2 45ACBR3 45ACBR4 45ACBR5 45ACCR1 45ACCR2 45ACCR3 45ACCR4 45ACCR5 045ACT 041D7675
10FT-RAIL-BELT

LiftMaster 10' belt drive rail 2770BD - colour code: Blue

  • Price reflects cost if purchased with an opener
7FT-RAIL-BELT

LiftMaster 7' belt drive rail 2777BD - colour code: Grey

  • Price reflects cost if purchased with an opener
535LMC*

LiftMaster Universal Radio Control Receiver 390 MHz **Replaced by 412HMC

  • Over 100 billion possible codes makes it impossible to duplicate the frequency
  • Jumper option for momentary or constant relay contact
  • Specifically for use with most 3-wire systems without a transformer
  • Accepts up tp 8 Security+ remote control codes and one keyless entry
  • Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the yellow LED light - Sec+ format
  • Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required
    • .......more details
.406_6"-LH

Torsion Spring .406 x 6" x 12ft LH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 6"
  • Length: 12 ft
71-B120

LiftMaster Interior Mount Solenoid Brake 115V

Instruction Manual
41A5483-4C

LiftMaster Circuit Board Assembly *** To Extent of Inventory

  • Assembly includes: circuit board end panel and light socket
  • For belt drive units
  • Fits 2280 2580 WD822K(s) WD922K WD912K(S)
  • Also known as 41A5483-4 41A5483-4B
T-833

FL-Allstar 3-btn 3-Door Transmitter 108817-311 MHz

  • This three channel transmitter controls up to three doors (open-close) or one door (open-close-stop).
  • It has a height switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 8833T (190-108817)
  • Dimensions: 4 5/8" x 2 1/4" x 7/8"
Programming Instructions
19-41HL

Half Link #41

  • Half link for #41 chain
  • ANSI Standard Carbon Steel
41AB050-2

LiftMaster Electronic Circuit Board Assembly

  • Assembly includes: Logic board end panel and light sockets
  • For belt drive models with 2-lights
  • Also known as 41AB050-2M
.468_5-1/4"-RH

Torsion Spring .468 x 5-1/4" x 12ft RH Blue/Orange

  • Wire size: .468
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.393_3-3/4"-RH

Torsion Spring .393 x 3-3/4" x 12ft RH Orange

  • Wire size: .393
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.363_3-3/4"-RH

Torsion Spring .363 x 3-3/4" x 12ft RH Green/White

  • Wire size: .363
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.273_2-5/8"-RH

Torsion Spring .273 x 2-5/8" x 12ft RH Orange/Red

  • Wire size: .273
  • Inside diameter: 2-5/8"
  • Length: 12 ft
373LMC

LiftMaster 3-btn Security+ Transmitter 315MHz

  • Visor clip and 3V lithium button cell (CR2032) battery included.
  • Same as Chamberlain model 953D
373LMC Manual
17310

Doorlec DC-3000T2 2-btn Transmitter 313 MHz

  • One block of 10 dip-switches for programming
  • Will activate 2 Doorlec 17307 receivers (DC-3000R)
  • Includes visor clip and 9V battery
Programming Instructions
CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

  • Single limit with curved actuator lever
  • Switch attaches directly to the Logic 6000 board
T3B-DS

Lynx 3-btn Transmitter Dip Switch 303 MHz

  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • 3-buttons provides control for 3 Lynx operators
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Will work with Lynx residential operators built from 2000 and up.
    • .......more details
Compatibility chart
H14GHALF

Half Hinge #1 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 1-5/8" wide with slotted holes
14FT-TROLLEY-SET

LiftMaster 14ft Double Angle Rail Set for Comm. Trolley Ops 10-5814-P (2 pcs) *Actual length 203"*

  • Double Angle Rails for doors up to 14' high
  • Works with models : MT T GT APT
  • Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
  • Actual Length 16' 11"