Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
GH4416-09-R

Green Hinge #9 12-ga Right Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-01-L

Green Hinge #1 12-ga Left Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-02-R

Green Hinge #2 12-ga Right Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
IG2-P1

Miller Edge Pair of Pedestal Mounts for IG2 Eyes

  • Flexible spring loaded pedestal stand
  • 30 degree of flex
  • 27" high from bottom base to photoeye
30B530

LiftMaster Capacitor 56uF 220V ** discontinued

  • Same as LiftMaster # 30B620
1104-8'-DES-SAN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Desert Sandstone

  • Garaga desert sandstone rigid vinyl retainer with Garaga desert sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
9382054125

Square Torsion Spring .343 x 5-1/4 x 41.25" with Cones RHW

  • 41.25" long = 160 coils
27-48-120

Extension Spring 8' Door - 120 lbs Green

  • Single - Loop
  • 27" long 48" stretch 120 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
MP00018

Micanan Up-Charge Track and #41 chain for 18' h Door *Actual length 246"*

  • For 3/4 HP and 1 HP operators only
MP00016

Micanan Up-Charge Track and #41 chain for 16' h Door *Actual length 222"*

  • For 3/4 HP and 1 HP operators only
SL316-ZP-COPPER

Zinc Plated Copper Sleeve 3/16" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST316COP. Stops are not zinc plated
SL532-ZP-COPPER

Zinc Plated Copper Sleeve 5/32" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST532COP. Stops are not zinc plated
2376.177_25.860

Whiting Torsion assembly .177 wire size 25" spring length 86" shaft

HTRKITRSL

LiftMaster Self-Regulating Heater and Coil for RSL12V ** DISCONTINUED

  • Protects system to -40F.
  • Installs into the operator frame
2522

Whiting Thrust Washer

  • Used on Whiting balancer assemblies
SLT2-20

Rolling Steel 2" Crowned Slat 20-ga Galvanized

PHOTO-008B

Manaras Non-Monitored Photoelectric Cells Nema 4/12 *** Discontinued

  • Through-beam type 24V
Installation Manual
.375-3-3/4-RH-C

Torsion Spring .375 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .375 ID: 3-3/4" Length: 12 ft
.319-5-1/4-RH-C

Torsion Spring .319 x 5-1/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .319 ID: 5-1/4" Length: 12 ft
.306-2-5/8-LH-C

Torsion Spring .306 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .306 ID: 2-5/8" Length: 12 ft
.283-3-3/4-LH-C

Torsion Spring .283 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .283 ID: 3-3/4" Length: 12 ft
.273-1-3/4-LH-C

Torsion Spring .273 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .273 ID: 1-3/4" Length: 12 ft
.262-3-3/4-LH-C

Torsion Spring .262 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .262 ID: 3-3/4" Length: 12 ft
.262-2-5/8-LH-C

Torsion Spring .262 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .262 ID: 2-5/8" Length: 12 ft
.250-2-LH-C

Torsion Spring .250 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .250 ID: 2" Length: 12 ft
.243-3-3/4-RH-C

Torsion Spring .243 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .243 ID: 3-3/4" Length: 12 ft
PRO-GH-7553U-LH

Micanan 3/4HP 575V 3P Gearhead Op. N1 Eyes Monitored ECB Left Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
MK-00699

Micanan Weatherproof Thru-Beam Photocell 0-45 ft Range

  • This item has been discontinued by the supplier
CH753L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification
  • Brake not included.
  • Comes with CPS-UN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
SOLID_SHAFT_14'

Solid Shaft 1" Keyed 14 ft Galvanized

  • Actual length is approx. 14'-1"
OTBH-6432-ECB

Manaras Trolley Operator 1/2 HP 480V 3 Ph with Electronic Circuit Board

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
Installation ManualSell Sheet
OSH-6234-ECB

Manaras Opera-SH 1 HP 208V 3 Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
OSH-6433-ECB

Manaras Opera-SH 3/4 HP 480V 3 Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
OSH-6432-ECB

Manaras Opera-SH 1/2 HP 480V 3 Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation ManualSell Sheet
OHJ-6534-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 600V 3 Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
OPJ-6214-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 240V 1 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
CBB332

Stop & Sleeve 3/32" 100 pair

  • Includes 100 stops and 100 oval sleeves
OPJ-6212-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 240V with Electronic Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
SLEDB-110V-AMB

Strobe Light Amber 110V Permanent Mount ** NLA

  • 88 flashes per minute
OTBH-6113-1-ECB

Manaras Trolley Operator 3/4HP 120V 1Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
K77-12486

LiftMaster Parts Box for Model MT/ BMT

SSZP11-1

Solid Shaft 1" Keyed Zinc Plated 11'-1" ** to extent of inventory

SSZP9-6

Solid Shaft 1" Keyed Zinc Plated 9'-6"

26-94623

Truck Door Top Panel (13" x 98") for Whiting DryFreight

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • .75" thick 7 ply exterior grade medium density plywood
  • Primer finish
7001-7-SANDSTNE

Commercial Side & Top Weather-Strip 7' Long - Sandstone 7001-SS (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (20)
K72-12508

LiftMaster Output Shaft Kit (1/3 & 1/2HP)

  • For commercial operator model T
Installation Manual
V1104-GREY

Replacement Vinyl Only for 1104-Grey 200ft Roll

  • Sold in 200 ft rolls only
915007048X

Extension Cable 1/8" 7x19 14' Sold as a Pair

  • Cable assembly for extension spring door - looped on one end the other is raw (no stops)
1104-16FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 16' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-9FT-CHARCL

Residential Side & Top PVC Weather-Strip with cap 9' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
MI00007

Micanan Front Idler Assembly for PRO-APT/T

  • For model PRO-APT / T
  • 3/4" x 5.79" LG
82-PX10-28

LiftMaster Screw 10-32x28

.234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.218-258-R

Cut-to-Length Torsion Spring .218 x 2-5/8" Right Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.225-2-L

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.243-134-R

Cut-to-Length Torsion Spring .243 x 1-3/4" Right Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.468_6"-LH

Torsion Spring .468 x 6" x 12ft LH Blue/Orange. **NLA

  • Wire size: .468
  • Inside diameter: 6"
  • Length: 12 ft
.437_6"-LH

Torsion Spring .437 x 6" x 12ft LH Red/Green

  • Wire size: .437
  • Inside diameter: 6"
  • Length: 12 ft
.283_5-1/4"-LH

Torsion Spring .283 x 5-1/4" x 12ft LH White

  • Wire size: .283
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.273_3-3/4"-LH

Torsion Spring .273 x 3-3/4" x 12ft LH Orange/Red

  • Wire size: .273
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.295_2-5/8"-LH

Torsion Spring .295 x 2-5/8" x 12ft LH Blue

  • Wire size: .295
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.250_2-5/8"-LH

Torsion Spring .250 x 2-5/8" x 12ft LH Green

  • Wire size: .250
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.363_5-1/4"-RH

Torsion Spring .363 x 5-1/4" x 12ft RH Green/White

  • Wire size: .363
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.375_5-1/4"-RH

Torsion Spring .375 x 5-1/4" x 12ft RH Yellow/Green

  • Wire size: .375
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.306_3-3/4"-RH

Torsion Spring .306 x 3-3/4" x 12ft RH Red

  • Wire size: .306
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.312_3-3/4"-RH

Torsion Spring .312 x 3-3/4" x 12ft RHW Yellow

  • Wire size: .312
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.273_3-3/4"-RH

Torsion Spring .273 x 3-3/4" x 12ft RH Orange/Red

  • Wire size: .273
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.243_3-3/4"-RH

Torsion Spring .243 x 3-3/4" x 12ft RH White/Yellow

  • Wire size: .243
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.218_1-3/4"-RH

Torsion Spring .218 x 1-3/4" x 12ft RH Yellow/Orange

  • Wire size: .218
  • Inside diameter: 1-3/4"
  • Length: 12 ft
MJ00001

Micanan Brake Shoe - Left **No Longer Available**

  • Only available in complete kit # MJ00013 or MJ00014 for PRO-GH
OPH-6113-ECB

Manaras Opera-H 3/4HP 120V 1Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
1003-5"-YELLOW

Bottom U-Rubber 5" Yellow 150' Long

  • 5" yellow vinyl insert 150ft spool.
1019-1-3/8-14'

Rigid Vinyl Bottom Retainer Flat 14' Long

  • Black - for door thickness of 1-3/8"
1006-2-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1003-1-3/8-16'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
7001-16-BROWN

Commercial Side & Top Weather-Strip 16' Long - Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-7-BROWN

Commercial Side & Top Weather-Strip 7' Long - Commercial Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1104-12FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 12' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-10FT-DK-BR

Residential Side & Top PVC Weather-Strip with cap 10' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1102-16-BLACK

Commercial Side & Top Weather-Strip 16' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
26-94521

Truck Door Intermediate Panel (11" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
25E10271

Truck Door Stud Plate for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Stud plate for 1 stud
  • Cross Reference: W #1370
CBB125

Stop & Sleeve 1/4" 100 pair

  • Includes 100 stops and 100 oval sleeves
OSH-6233-ECB

Manaras Opera-SH 3/4 HP 208V 3 Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
UNI-100-142

Uni-Size Bottom Weather Seal 14'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
.306-3-3/4-RH-C

Torsion Spring .306 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .306 ID: 3-3/4" Length: 12 ft
26-94625

Truck Door Top Panel (15" x 98") for Whiting DryFreight

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • .75" thick 7 ply exterior grade medium density plywood
  • Primer finish
1006-2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1019-1-3/8-16'

Rigid Vinyl Bottom Retainer Flat 16' Long

  • Black - for door thickness of 1-3/8"
SLT2-22

Rolling Steel 2" Crowned Slat 22-ga Galvanized

OPH-6232-M-N1-RH

Manaras Opera-H 1/2HP 208V 3Ph with Monitored Board and N1 Photoeyes

  • Monitored version with Nema 1 photoeyes
.319-334-R-C

Cut-to-Length Torsion Spring .319 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-375-Installed
2704.148_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

  • Most common torsion spring for cube trucks
  • Specs: .148 x 2-3/16" x 18" Long
  • For Curbside order part # 2705.148*180
GH4416-06-L

Green Hinge #6 12-ga Left Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
1801.77

Whiting Aluminum U-Channel 96" *** Price by Quote

  • Special order item. Price by quote only
  • For bottom seal use item 1676.96
K41-0071-000

LiftMaster HD Power Board Service Kit for HDSL24UL/HDSW24UL

  • Compatible with the following models: HDSL24UL HDSL24ULMC HDSW24UL HDSW24ULMC
7-6134

RW Top Spring Bolt 514 x 3 1-1/4" sq x 9" Long

  • Bolt: Bevelled steel
  • Chain: Zinc plated 70" long with ring
  • Black Enamel finish
5-18-4

Tapered Angle Continuous 2" Heel x 129" L Sold in PAIRS

  • For 2" track up to 2" thick
L957W

LiftMaster Motion Detecting Control Panel Security+ 3.0

  • LCD screen displays temperature time and maintenance alerts.
  • Motion detector activates the garage door opener lights as soon as movement is detected.
  • Timer-to-Close allows you to automatically close your door after a pre-programmed number of minutes.
  • Lock function blocks the garage door from being opened by remote controls.
  • Includes a push bar for garage door opener operation and a light control button.
  • Built-in learn button enables fast & easy programming of remotes keypads myQ® accessories and Wi-Fi garage door openers.
    • .......more details
Installation ManualManual d'installationCompatibility Chart 2025Comparison Chart 2025
R4AES

Erone Radium 4-Button AES128 Encrypted Remote

  • Compatible with any high-security AES128 wireless receivers they were designed to prevent the cloning of remotes
  • The code sent by the remote changes at each activation removing any scanning and copying risk.
  • A special algorithm ensures a continuous synchronization between the receiver and transmitter
  • Includes AES128 encryption
  • Compatible with RADIUM AES128 receivers
  • Range up to 820 ft (250 m)
    • .......more details