Devanco Canada - Get The Right Garage Door Opener‎ and Parts

26-40045

Truck Door Offset Bottom Seal 98" Long for Whiting Dryfreight Doors

Co-extruded using rigid PVC backing with flexible PVC seal.
To be used with the offset U-channel retainer only (26-40037 or 26-40039)

MO00002

Micanan Brake Compression Spring (5/16" ID) *** Replaced by MO00034

MA117

LiftMaster Counterweight for Arms 15ft & Up

LA400DC-S

LiftMaster Residential 24VDC Linear Actuator Secondary Arm Only New Model

Secondary Arm Only for LA400
All new arms are backwards compatible with the previous model but the LiftMaster branding is different

Installation Manual Manuel d'Installation Sell Sheet

41D605-1

LiftMaster Electric Motor 80kg/100kg

For retail models: WD952KD HD800D and WD952LD

Replacement Instructions Instructions de remplacement

10-1000-14FT

Strip Curtain 14' x 48" Angle Mount - 8" LT PVC - 4" O.L Clear

14 ft wide x 48" high
Mounting bar sold separately

IG2-EXT-MNT

Miller Edge Wall Mount Extension Bracket

1 ft L x 2" H x 3" W

K001A6039

LiftMaster Control Board for LA400

Replaces P/N 127A0071C PN 127A0071F

Installation Manual

HBFST-BC

Keyed Control Switch with Best Cylinder

NEMA 1
TAMPERPROOF FLUSH MOUNT
TWO POSITION (OPEN-CLOSE) WITH STOP BUTTON
CENTER RETURN
SINGLE GANG BACK BOX
STAINLESS STEEL FACEPLATE

.......more details

502-0022

Reversing Edge BEP 100C Air Tube 4" from End Edge Length 93.5"

OSH-6112-ECB-LH

Manaras Opera-SH 1/2HP 120V 1Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual Sell Sheet

K20-1100C-2TLP

LiftMaster Electric Motor 1 HP 115/230V 1Ph TEFC Logic

PRO-HBH-7511U-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

14FW

Rolling Steel 3" Filler Endlock for Continuous

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

17K

Rolling Steel 2" Flat Continuous Cast Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

SLT14-20P

Rolling Steel 3" Flat Slat 20-ga Primed

SLT4-18P

Rolling Steel 3" Crowned Slat 18-ga Primed

.343-3-3/4-RH-C

Torsion Spring .343 x 3-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .343 ID: 3-3/4" Length: 12 ft

.343-2-5/8-RH-C

Torsion Spring .343 x 2-5/8" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .343 ID: 2-5/8" Length: 12 ft

.295-3-3/4-LH-C

Torsion Spring .295 x 3-3/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .295 ID: 3-3/4" Length: 12 ft

.192-1-3/4-LH-C

Torsion Spring .192 x 1-3/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .192 ID: 1-3/4" Length: 12 ft

RN0039-SS

Roller 3" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

A supreme double sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
200 lb load 100000 cycles of a 12' door
Stem Length - 8.312" Overall Length - 9.25"

PRO-TB-7511-U

Micanan 3/4HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

BK314

Jamb bracket J-14 #14 12 gauge

Sold by the piece
Height 5.50" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

BK306

Jamb bracket J-06 #6 12 gauge

Sold by the piece
Height 3.50" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

201-300-401-01

Equinoxe Long Range Transmitter O/C/S for 8-Doors 433 MHz New Generation

Open/Close/Stop remote for 8 doors
Range of approx. 1000ft
A heavy-duty remote for Industrial applications
Year 2016 +

Programming Instructions Instructions de programmation

801-300-002-01

Equinoxe Long Range Receiver 1-Door Industrial Enclosure 433 MHz New Generation

1000 ft range
2016+
This receiver will accept 8 Equinoxe O/C/S remotes
Nema 4

Programming Instructions Instructions de programmation

T103L5

LiftMaster 1 HP 208/230/460V 3P Commercial Trolley Operator Logic 5

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

T753L5

LiftMaster 3/4 HP 208/230/460V 3P Commercial Trolley Operator Logic 5 ***No Longer Available

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

PULLEY020

Manaras Clutch Pulley 7" x 5/8"

Included in MOUNTSHAFT001 001A 007 011 and 014

PPK3

LiftMaster Passport 3-Button Mini Remote Control with Sec+ 2.0 Technology ** To extent of Inventory

Programming Instructions Instructions de programmation Sell Sheet

Z9200

Cable Snubbers Sold as a Pair

Prevents slack from forming in cables
Sold in pairs

Installation Instructions

104100

FAAC Hydraulic Swing-Leaf Gate Operator S450H 24VDC

Hydraulic operator for residential and condominium swing gates with single-leaf max width of 3 m (SB) and 2 m (CBAC).

97798

Marantec 2 Piece Logic Board with Terminal Strip for EOS Models

For use on Easy Operating System (EOS) units 4500E 4700E and M50.
Includes the terminal strip for direct replacement of boards that had a power surge or burned out.
The marantec old model number was 78914 it is now 97798.

Programming Instructions

3X6SC50

Devanco Loop 3' x 6' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

771

Fasteners Lag Screw Hex Washer High Profile 5/16" x 1-3/4" 1000/Box *** Discontinued

7/16" head

790

Fasteners Hex Nut 3/8-16 1000/Box

AW14-RF-K10

Miller Edge Wireless Air Wave Switch Transmitter/Receiver Kit

AW14-RF is the AW14 air wave switch with a transmitter embedded within the switch enclosure and the receiver wires into the operator.
There is no need to hardwire coil cords or retracting reels which saves installation time and improves visual aesthetics.
The AW-14-RF-K10 switch kit includes a MRF-01 receiver which is wired to the motor controls.
Battery is included # CR2032

Installation Manual Sell Sheet

K2A761

LiftMaster Coaxial Cable

For use with 315MHz receiver

K72-16421

LiftMaster Limit Shaft Assembly LGO****Discontinued and no Longer available

Assembly includes: Limit shaft Limit nut Sprocket Roll pin Bushing E-Ring and Chain.

Installation Manual

CH505L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 575 VAC 3 Ph Logic 5 Left Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes
Comes with 02-403P NEMA 4 push button

Installation Manual Manuel d'Installation Sell sheet Brochure

K001D8075-1

LiftMaster Logic Board - L5 ** USE K001D8395

14D1279E

Programming Instructions Instructions de programmation

K72-14130-1

LiftMaster Limit Shaft Kit H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators

For models H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators
Kit includes: Limit shaft Limit nuts Limit bearings Limit sprocket Interrupter cup Shim washers Compression ring Roll pin and E-rings.

26-14623

Truck Door Top Panel (13" x 98") for Todco DryFreight

These panels are cut to an extra wide width to fit wider vehicle applications
Interlocking tongue and groove design for weather-tight joint and proper alignment.
.75" thick 7 ply exterior grade medium density plywood
Primer finish

41DB001-1

LiftMaster Circuit Board Assembly

For belt drive unit model 3500 (315MHz)
Assembly includes: Board end panel and light socket
Also known as 041DB001-1C

AIRSWITCH008

Manaras Metal Case for AIRSWITCH007

466LMC

LiftMaster Wireless Commercial Keypad 390 MHz ** Discontinued

Up to 100 000 individual codes
Mounts to wall or gooseneck post
Incl. 6-volt alkaline battery
Illuminated stainless steel faceplate and keypad
Tamper-resistant case and "low battery" indicator
Requires 412HMC receiver

.......more details

Installation Manual Sell Sheet

27-20112

Truck Door W-Style Spring Assembly Curbside 33" Long

Wire thickness: .182
Spring length: 33 inches long (assembled length)
Inside diameter: 1.188
Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.

PED72

Pedestal Post 72" Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with a 6 in. center radius giving a tight professional look

GITR-3

Genie Intellicode 3-Button Remote 37517S 390 MHz *** To extent of Inventory

Replaces Series II GIT-1 GIT-2 & GIT-3
Battery Instructions Visor Clip Included
Note: Only the far right of the three buttons (1 dot button) will operate those older Genie Intellicode units built from 1995 through 1997.
If you have a Genie unit built in 1995 1996 or 1997 this is the only remote that Genie presently makes to operate the Genie garage door openers built during these years.
In this special case the remotes can only be used as 1 button remotes and no other multi-button Genie remote is compatible.

Programming Instructions Instructions de programmation

MK00736

Micanan Smart 10.0 Full Feature Circuit Board Non-Monitored ** use MK00641-NM

For 1/3 1/2 and 3/4 Hp - 110/220V 1p 230V 3p
Board has 5 relays

Instructions Manual

BOARD075E

Manaras Replacement Board Kit (No Monitoring)

Replacement kit that includes BOARD070E (control board) & BOARD066R (power board)
BOARD070E is for standard operators without the monitoring function
For all Manaras operators built after October 2010
On-board 390MHz radio receiver accepts 50 remote controls
For older models built before October 2010 use BOARD060 or replacement kit BOARD065

Replacement Chart Guide de remplacement

MDT-4A

Linear 5-Channel Visor Transmitter MegaCode 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Factory programmed MegaCode format supports over 1000000 codes
Unique ”Extra” top button
High visibility operate LED
Visor clip included

.......more details

Programming Instructions

MX00149

Micanan Complete Clutch Shaft Assembly for PRO-H

MJ7104

Doorlec Utility Switch 21800

Utility switch with a 'NO' and a 'NC' contact
Adjustable arm with roller

85LMC

LiftMaster Plug-In Power Supply

Plug-in jack for easy installation on Liftmaster receivers
Power input level: 105-135AC 24AC output

.250-2-R

Cut-to-Length Torsion Spring .250 x 2" Right Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.250-134-L

Cut-to-Length Torsion Spring .250 x 1-3/4" Left Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

ME123-C

Miller Edge U-Shaped PVC Mounting Channel Sold by the Foot

2" Wide 1-1/4" High

1091303602

Overhead 2-btn Transmitter 360 MHz model: 111663-3602

OVERHEAD DOOR remote control transmitter 109130-3602 works with 9 dip switch on 360 frequency.
Part number has changed to 111663-3602

Programming Instructions

77810.0001

Overhead Door Box Assembly Cushion (#111389.0001.S) ** Price by quote only

Garage door operator bracket for older Overhead Door residential models (Automate 70 Touch n Go R-80 100 100SS 1000) and commercial garage door openers.

475LMC

LiftMaster DC Battery Backup *** To Extent of Inventory

For use in Liftmaster 3500 3800 and 8500 models
1 year warranty

Installation Manual Manuel d'Installation

ME113-C3

Miller Edge PVC Mounting Channel "L" Shape Sold by the Foot

.375_5-1/4"-LH

Torsion Spring .375 x 5-1/4" x 12ft LH Yellow/Green

Wire size: .375
Inside diameter: 5-1/4"
Length: 12 ft

.306_5-1/4"-LH

Torsion Spring .306 x 5-1/4" x 12ft LH Red

Wire size: .306
Inside diameter: 5-1/4"
Length: 12 ft

41C4470

LiftMaster Gear & Sprocket Assembly for ATS211

Complete Gear and sprocket assembly for ATS211 ATS211R built from 1993 - 2003

Installation Manual Manuel d'Installation

41A4885-5

LiftMaster MVIS Pulley/ Worm Gear Assembly

Gear and sprocket assembly for belt drive units after 2002.
Assembly includes: Spring washer thrust washer retaining ring bearing plate two roll pins drive gear and worm gear helical gear with retainer and grease.

Installation Manual Manuel d'Installation

12-10029

Flanged Bearing 3/4" x 1-1/4" x 5/8"

41A5483C

LiftMaster Circuit Board Assembly *** To extent of Inventory

Assembly includes: Circuit board end panel and light socket
For chain drive units with two lights
Fits 2265 2565 7420 PD610 PV612C & PD612K
Last letter of the part # indicates revision date
Also known as 41A5483 41A5483B

.306_6"-RH

Torsion Spring .306 x 6" x 12ft RH Red

Wire size: .306
Inside diameter: 6"
Length: 12 ft

.331_3-3/4"-RH

Torsion Spring .331 x 3-3/4" x 12ft RH Red/White

Wire size: .331
Inside diameter: 3-3/4"
Length: 12 ft

.262_2-5/8"-RH

Torsion Spring .262 x 2-5/8" x 12ft RH Red/Yellow

Wire size: .262
Inside diameter: 2-5/8"
Length: 12 ft

.273_1-3/4"-RH

Torsion Spring .273 x 1-3/4" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 1-3/4"
Length: 12 ft

T2B-DS

Lynx 2-btn Transmitter Dip Switch 303 MHz

Ultra secure mid-size transmitter with 8 dip-switches for coding
2-buttons provides control for 2 Lynx operators
Compatible with HomeLink in-vehicle remote control
Can be mounted on visor with saddle clip or carried on a keychain
Visor clip and 12V battery included
Will work with Lynx residential operators built from 2000 and up.

.......more details

Compatibility chart

H14G01

Hinge #1 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#1 position
Use between sections 1 and 2 or in the center position
Same as part number 241

.......more details

SEL2641R433-IP

Erone 2-Relay Stand Alone Receiver Pulse/Latch or Delayed Relay Output 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
Standard pulse latched or timed relay output
Power requirements: 12/24Vac/dc
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)

.......more details

Instruction Manual Sell Sheet Wireless System Chart

CONTACTOR044

Manaras Schneider Reversing Contactor 12A-24VAC

Reversing contactor with 24V coil
Same as part # LC2K12107B7
Demensions: 3.5" long x 2.25" wide x 2.25" high
Use 03-8024K as possible replacement

7470.115

Whiting Side Seal for insulated doors 115" Long

Fits Coldsaver and Tempguard

9931MT

Allstar 1-btn Mini Transmitter 109391 318 MHz ** NLA

Open/Close mini remote for 1 door
Compatible with Allstar and MVP receivers
Tab for key ring
Power: 12-volt battery
Codes: 19683 (set by nine trinary dipswitches)
RF frequency: 318 MHz

.......more details

Programming Instructions

232168

Capacitor 3/4 HP 220V 65 MFD

For LCO75 only

4004-16FT

Aluminum Retainer only for Heavy Brush 16' Long 45 degree

For angle application (45 degree)
For use with Heavy Brush

4007-8FT

Aluminum Retainer only for Light Brush 90 degree

For angle application
For use with Light Brush or Vinyl Insert.

1008-1-3/8"

Bottom Nail-On for Wood Door Light Duty per foot

For 1-3/8" doors.
Color: Black

1004-2-24'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 24 ft***Actual Length 24'4"***

For door thickness 2"

1003-1-5/8-12'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

1003-1-3/8-10'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

1104-8FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Brown (N)

Brown rigid vinyl retainer with brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

RP-3002

Rubber Plug 1/2"

To plug end of 3002 gum hose

18-HWB-PAIR

Winding Bars Hex 18" Set of 2

Cold rolled hardened steel.
Hex shape keeps the bar from rolling away.
Machined to 7/16" at one end with a 1/2" outside dia. on the other end
Sold as a pair.

1104-16FT-SAND

Residential Side & Top PVC Weather-Strip with cap 16' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

1001-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

Aluminum retainer with black dual-fin vinyl

25-42-90

Extension Spring 7' Door - 90 lbs Light Blue

Double - Loop
25" long 42" stretch 90 lb load
Sold individually
Same as part number 109
Rated for 10000 cycles

Spec Sheet

28-02201

Truck Door 2" Vertical Track & Right Angle Assembly 106.5" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-1
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints