Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
K41-0157-000

LiftMaster Cable Tension Monitor Right Side

  • For use with various LiftMaster® MAXUM Series DC 700 lbs. to 2200 lbs. Standard-Duty and Extended-Duty Jackshaft Jackshaft Hoist and Trolley Commercial Door Operators
  • This service kit is compatible with the following MAXUM models: JDC JHDC and TDC.
  • NOTE: Refer to K41-0156-000 for Left-Side Cable Tension Monitor
XF208VAC12

LiftMaster 208V Transformer Kit 1200

PRX-320

EMX Keypad/Card Reader Waterproof 5402-1

  • Up to 2000 users by card
  • Up to eight user pass codes by keypad
  • Low energy consumption ideal for solar applications
  • Built-in contact for doorbell annunciator
  • CE certified and is also ROHS compliant
  • Key Confirmation: Green LED On while key is depressed
    • .......more details
RTBH-6114-AM06

Manaras Silencio HD Trolley Op. 1HP 120V 1PH Monitored VFD

  • The Silencio® RTBH-A.06 is a heavy-duty apartment type garage door operator designed for use on properly counter-balanced industrial standard lift sectional doors which possess high-cycling daily frequency requirements
  • Soft-Starts and Soft-Stops
  • Electrically activated drum-band type solenoid brake
  • Ceiling-mounted with 8.69" headroom clearance required below the tracks
  • Dimensions: Back Room: door height + 4'5" (1350 mm) Head Room For Tracks : 5.625" (143 mm) above the highest point of door travel
  • Tracks sold separately
    • .......more details
OPJ-6114-M-N1

Manaras Heavy-Duty Jackshaft Op 1 HP 120V 1PH Monitored ECB w/N1 Photoeyes

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
36350

Doorlec Reversing Time Delay 1.5 sec. 24VAC

  • In closing cycle door will stop for 1.5 seconds and reverse to fully open
OTBH-6113-AM06

Manaras Apt-Style Trolley Op 3/4HP 120V 1Ph Monitored w/N1 Eyes Silencio

  • The Silencio operators have integrated noise reducing enhancements which make it 4X QUIETER than the Premium Trolley Apartment model (OTBH-A.05).
  • A low headroom apartment type garage door operator designed for use on industrial standard lift sectional doors with high cycling daily frequency requirements
  • Mounting (Low Headroom Design): Ceiling-mounted with only 6.25" headroom clearance required below the tracks. For indoor use only.
  • Dimensions: Back Room: door height + 4'5" (1350 mm)
  • Head Room For Tracks: 5.625" (143 mm) above the highest point of door travel
29-NP812

Lead Acid Battery 12V 8A

  • Also known as: 29NP0812 K29-NP08-12 29-NP08-12
P-733T

Pulsar 3-btn 3-Door O/C/S Transmitter 318 MHz

  • Allstar compatible
  • Wall mount
  • OPEN-CLOSE-STOP 3 doors
  • 8 dipswitches 318 MHz
Programming instructions
83650-267

LiftMaster Premium Series 1/2 HP AC Chain Drive Wi-Fi Bluetooth Technology ***NLA*** No Stock Left

  • P3 Motors from LiftMaster are reliable durable and powerful – designed specifically for your needs.
  • Security+ 2.0 – with every click a new code is sent to the garage door opener so that the door opens only for you.
  • PosiLock locks down your garage door by electronically monitoring against a forced opening.
  • Alert-2-Close warning system provides audible and visual warnings when the garage door is about to close when using MyQ Technology.
  • The Protector System has safety sensors that project a light beam across the garage door opening automatically reversing the door if anything interrupts the beam.
  • Built in Wi-Fi for the easiest way to connect the garage.
    • .......more details
Product guideGuide de produit83650-267 Installation Manual83650-267 Manuel InstallationReceiver Logic Board Conversion ListReceiver Logic Board Conversion ListComparison Chart
02-411

LiftMaster Pull Switch Assembly Nema 4

  • May be used in two different ways: as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring).
  • In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
  • Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
312964

ODCC Adjusting Wheel 8" OD 1" Bore

50-CP4

LiftMaster Sensing Probe Free Exit 100ft Lead

  • Self-contained free exit system designed to detect moving vehicle and open your automatic gate.
  • Can be installed above or below ground
  • Connects directly to any gate operator without an external output board.
  • Works with powered or solar gates.
  • SPECIFICATIONS: Cable Lead Length: 100 ft.
  • Power Requirements: 8-24 VAC oe 8-30 CSX
    • .......more details
Installation Manual
DEV-RSFD-7000

Devanco Rolling Steel Fire Door 7000 UL Rated **Made to Order

  • Model 7000 are manufactured with UL labels of Class A B or C; however their sizes can be customized to an extent with UL oversize certificates.
  • Model 7000 fire door includes UL labels of 3 1½ and ¾ hours.
  • The fire door’s heat-sensing technology will allow the doors to close automatically with additional smoke protection available that makes the fire door more reliable than alternative options.
  • Door sizes can be customized to fit openings that are 43 feet and 6 inches wide by 26 feet tall.
  • The doors also include viscous-governor technology as well as a 165-degree fusible link.
  • Pricing varies according to size and options selected.
    • .......more details
751-CDN

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 1" (#2PT) Canadian Steel - 1000/Bag

  • 7/16" Head
  • Indented hex washer head
  • Max RPM = 2000
  • Made in Canada with Canadian Steel
C-34X16-134-W-G/T

Thermal Window 34" x 16" for 1-3/4" Door White Frame Grey Tint Glass

  • For 1-3/4" thick door
GH-383-1.5

Doorlec Industrial Gearhead Door Operator 1.5 HP 208V 3-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
87802

LiftMaster Elite Series HD 3/4 HP DC Chain Drive Wi-Fi with BBU ***NLA*** Use 4690L instead

  • Drive system: Chain drive
  • Horsepower: ¾ HP Equivalent DC Motor
  • Voltage: 120V AC 60 Hz
  • Backup battery included for operation even when the power is out
  • Soft start/stop for smooth operation
  • Integrated Wi-Fi and Bluetooth
    • .......more details
87802 Installation-manual87802 installation-manuelReceiver Logic Board Conversion ListComparison Chart
LJH-311-1/2-RH

Doorlec 1/2 HP 115V 1PH Jackshaft Operator Right Hand

  • CSA approved
  • Heavy duty industrial type control station open close stop 24V. control circuit
  • Universal mounting right or left
  • Floor level disconnect device electrical and mechanical
  • Emergency chain hoist operation on LJH model only
  • Colour code wiring diagrams
    • .......more details
Technical information
MTS3

Linear Megacode 3-Ch Visor Transmitter 318MHz (DNT00093)

  • Operates up to 3 garage doors
  • Easy to add/remove programming
  • LED light confirms battery power
  • Requires one (1) CR2032 coin-cell battery (battery included)
  • Includes Visor Clip
  • Ergonomically designed
    • .......more details
Programming instructionsInstructions de programmation
12-12004

LiftMaster 1" Ball Bearing

  • For use with various LiftMaster® Heavy Industrial-Duty Commercial Door Operators
  • Drive shaft bearing used on RBH
  • Same as K12-12004
EXA-1000

Linear Omni-Directional Remote Antenna (AAE00198)

  • The EXA-1000 is a 1/2 wave center fed vertical antenna composed of three parts: an Antenna assembly with an F connector attachment; a Base Plate assembly with radial mounting provisions; and a five-foot 75-ohm coaxial cable.
  • The cable connects to the antenna base on one end and the receivers F connector on the other.
  • If the antenna must be mounted further than five feet from the receiver an extension cable of up to a maximum of 25 feet may be used instead of the five foot cable supplied.
  • Because of the cable resistance the performance of the EXA-1000 may be degraded by using longer than a 25 foot cable
  • Compatible with all Linear receivers with Type F antenna connector
  • Receives signals in 288 to 320 MHz range
    • .......more details
Installation manual
K16-GT2-7

LiftMaster Timing Belt

  • 3M belt
  • Durable construction
  • Resists damage from friction and pollutants
  • Even stress distribution for heavy-duty operators
  • For use with LiftMaster CSL24UL CSL24V CSL24VDC
  • DIMENSIONS: 7.5 in OD x 7.25 in ID
    • .......more details
SGO-311-1/2HP

Doorlec Slide Gate Op. 1/2HP 120V w/500w Heater

  • Engineered to accommodate heavy duty hight frequency commercial and industrial sliding gates with cantilever overhead or roller V track application
  • It is enclosed in a heavy steel base with 500 Watt thermostatically controlled heater and lockable cover
  • Three button control O/C/S
  • Adjustable clutch
  • Solenoid brake
  • Universal mount. Left or Right side
    • .......more details
ON4E/A

NICE Apollo Era One 4-Channel Transmitter w/Visor Clip 433 Mhz

  • Unlock your gate with the new Era One!
  • A 433.92 MHz rolling code transmitter with management of identity codes and certificates it is self-learning with a built-in proximity receiver.
  • With 72 bit O-Code encoding it is also compatible with Nice Flor encoding receivers.
  • If you've ever been frustrated programming remote controls have no fear! By using a transmitter already programmed to the receiver it memorizes the data via an enabling code between the two making programming a simple process
  • The Era One uses data processing and recognition systems that increase its degree of security delivering a threefold reduction in automation response time. Attach the Era One transmitter to your keys or fix it to your car visor with the included visor clip.
  • Estimated Range: Outdoors: 656 ft Inside Building: 115 ft
    • .......more details
30003

Doorlec Brake Solenoid 115V with wire leads

  • Works with all 115 Volt Doorlec Commercial and Gate operators
787453

FAAC XT4 4 Channel Remote Control Transmitter 433RC ***discontinued

  • 4 Channel
  • Visor clip & 12v battery included
  • Features programmable technology
  • Dimensions: 2" x 2.5" x .5"
HCNB14

Richards-Wilcox 14 Gauge Center Hinge 9-2317

  • Galvanized 12 gauge hinge
950-188

Richards-Wilcox 2" or 3" Single Bottom Cable Bracket Left Hand

  • Original Richards-Wilcox part
RADIO-RE901A

Manaras 1-Channel 24V Dip-Switch (313MHz) & Rolling Code (390MHz) Receiver with Commercial Antenna

  • For Commercial/Industrial Garage Door Applications
  • Wall Mount
  • DIP Switch and Rolling Code Technology
  • Sixteen (16) Fixed Codes / Receiver
  • 313 MHz & 390MHz Radio Frequency
  • Controls One (1) Door
    • .......more details
Programming instructions
2807.162.180

Whiting .162 x 2-3/16 x 18" Curbside with Cones

K001D8397-1

LiftMaster Power Board 3ph 575V L5

  • This is a 3PH/L5 Power Board 575V Replacement Kit. Compatible with various LiftMaster® 3 Phase Logic 5.0 Commercial Door Operators; equipped with current sense
RBH503L5-LH

LiftMaster 1/2 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Left Hand

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
PRO-PL-10053-E

Micanan Wall Mount Control Panel 1HP 575V Non-Monitored ECB

  • Standard features include: N-4/12 12" x 10" x 6" panel B-2 C-2 D1 E2 T TS Mid-stop control functions Time delay on reverse On-board radio receiver hinged cover backplate primary fuses in panel
  • If PBS on cover required an additional charge will apply
  • If panel not ordered with an operator an additional charge will apply
H503L5-RH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 208/230-460V VAC 3 Ph Logic 5 Right Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
XRS-02

Rodent Shield 2 x 8" x 1" Strips Peel and Stick Sold in Pairs

  • Prevents damage to garage door side seals due to gnawing rodents
  • Made of high quality stainless steel so it will not rust
  • Invisible from the exterior. Installs on the inside of weather strip - no painting or covering is required.
  • Easy installation. No tools required just peel and stick
  • An inexpensive solution to a common rodent problem around households
  • One size fits all. No need to measure or trim
    • .......more details
MP-00039

Micanan High Cycle Mod. for PRO-TTB

  • Modification only
  • For installations that exceed 100 door cycles per day
  • Includes cast iron flanged precision bearings on all shaft and delay on reverse circuit
  • Supplied with #41 chain
MU22-4WIRE-E-Y

Miller Edge MU22 4-Wire End Yellow - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
4059GY-216

Garex Thermo Moulding 3/4" Beading Gray 18ft

  • White and Black also available
TRACK-2"-RAW-9

Raw Vertical Track 2" 9'-0" Sold per Piece

SPRING-SQUARE-W

Torsion Spring Square Wire Custom Order

  • Custom spring made to order
CR-2154

Raynor Replacement Photocells *** Discontinued

  • The original PEC-R3 Sensors manufactured by Raynor are no longer available.
  • The CR-2154 Sensors are the only sensors currently available to replace the original PEC-R3 Sensors.
  • Includes both the Emitter and Receiver sensors
  • Includes new sensor mounting brackets. Wires are not included.
  • These sensors are slightly different and will not mount to the original PEC-R3 sensor brackets.
  • The new CR-2154 Sensors require new mounting brackets (included) to be installed
    • .......more details
AOMRON

Omron Heavy-Duty Retro-Reflective Photo Eye 110VAC/24V 40ft Range

  • 24-240 VAC/DC
  • 35mA/125mA at 24VAC
  • 20mA/60mA at 110VAC
  • UL listed to UL325 standards
  • NEMA 3 4 12 Outdoor Rating
  • 40 ft. sensing distance
    • .......more details
SAG-M

Siren Activated Gate Sensor Formally SOS Sensor

  • New and Improved Siren Operated Sensor SOS.
  • Allows Entry of Emergency Vehicles through Gates
  • The Siren Activates Gate Opener while all other sounds are rejected
  • Comes with a 4 x 5 Inch Reflective Sign
  • 12-24VAC/DC
  • Emergency responders use the YELP signal to activate the gate
    • .......more details
226-9312

Lithium AA 1.5V Battery

  • Used in IG2 photo eyes
HTR

LiftMaster Heater Kit for DC Pad mount Gate Operators

  • Heater kit for pad mount DC gate operators.
  • Includes battery bracket.
  • Protects system to -40° F and installs on operator frame
  • works on 120 or 240 VAC.
Installation Manual Manuel d-Installation
29-98200

W-Style Universal Drop In Door 98" x 100"

  • Shipped with hardware loose on each side
  • 98" W x 100" H
  • Made with 3/4" thick 7 ply exterior grade medium density plywood
  • Includes all hardware
  • Other sizes available
41DS002-2

LiftMaster Electronic Circuit Board Screw Drive Models 3840 *Discontinued*

  • Logic Control Board 315 MHz
  • Compatible with 3840 Screw Drive Purple Learn Button
21-35077

LiftMaster Transformer 575V 24V 40VA

  • 575V PRIMARY 24V SECONDARY 40VA
  • Same as K21-35077
Q222

LiftMaster Control Board for MIR-1 (K001A5868) *** No Longer Available

  • For Miracle-One single operator - one arm
  • Same as K001A5868
SOLID_SHAFT_18'

Solid Shaft 1" Keyed 18 ft Galvanized

  • Actual length is approx. 18'-1"
MV-00297

Micanan Commercial Wireless Keyless Entry 372 MHz

  • Will work on Micanan commercial operators that have an on-board receiver
  • If there is no receiver then MK-00648 is required
  • Same as MV-00086
Programming instructionsInstructions de programmation
EBOX-HHD-7511-R

Complete Control Box for PRO-HHD-7511 with Mechanical Contactor and Timer to Close

H501L5-RH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 115/230 VAC Logic 5 Right Hand *** No Longer Available

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
71B120G

LiftMaster Brake Kit 115V with Solenoid Field Install SL585 and SL595

Instruction Manual
GITR-3

Genie Intellicode 3-Button Remote 37517S 390 MHz *** To extent of Inventory

  • Replaces Series II GIT-1 GIT-2 & GIT-3
  • Battery Instructions Visor Clip Included
  • Note: Only the far right of the three buttons (1 dot button) will operate those older Genie Intellicode units built from 1995 through 1997.
  • If you have a Genie unit built in 1995 1996 or 1997 this is the only remote that Genie presently makes to operate the Genie garage door openers built during these years.
  • In this special case the remotes can only be used as 1 button remotes and no other multi-button Genie remote is compatible.
Programming InstructionsInstructions de programmation
197LM

LiftMaster Wire Channel for T-Rail 5ft Replaces 27LM

  • Plastic channel attaches to the T-rail
  • Hides up to 3 pairs of wire
  • Each piece is 5ft long
  • Box quantity of 100
TUBE_SHAFT_17FT

Hollow Shaft 1" x 17-0" Galvanized 16 gauge

PMT20KIT

Carlo Gavazzi PMT20RI & PMT20I Thru Beam Kit

  • Suitable for exterior applications NEMA 4
  • Multi-supply voltage 12-240VDC 24-240VAC
  • LED indication for power supply and target detected
  • Not recommended for carwash applications
  • Operating temperature -25 to +55 C
  • Terminal 5 Common "NO" on Terminal 4 "NC" on Term. 3
    • .......more details
Installation Manual
IS-2

Interlock Switch for Sectional Doors

  • Mounts on the door track to prevent the use of the operator when door is locked
  • Can be wired to a three button station
  • Demensions: 3" h x 3" w x 1-1/2" d
CPS-UN4

LiftMaster Commercial Protector System Thru-Beam Eyes NEMA4

  • Waterproof photoeyes.
  • for direct connect to operators with Logic boards. L3 L4 L5
  • Receiving Eye - A: 50-50997 Sending Eye - A: 50-50998
  • These eyes will also work on the Micanan UL325 monitored operators
Installation ManualManuel d'InstallationSell Sheet
828LM

LiftMaster Internet Gateway Sec+ 2.0

  • Monitor and control your garage door opener from anywhere in the world right from your smartphone or computer
  • Easy and fast installation through your in home router.
  • Only works with new MyQ compatible Garage door openers
  • Controls up to 16 garage doors gate operators or MyQ-Enabled devices.
Programming InstructionsInstructions de programmationSell SheetBrochure
41K4629

LiftMaster CPS Interface Black Box (CPICARD)

  • Allows CPS-U photoeyes to provide a 'NO' contact
  • Interface is included with CPS & CPS-N4
  • Also known as 041K4629 1C4489 41K4629 41C4489 CPI
890MAX

LiftMaster 3-btn Mini Transmitter Security+ 2.0 **To extent of inventory. PPK3M is the replacement.

  • Can be used as a replacement remote control for 80 Series 970 Series and 370 Series LiftMaster remote controls.
  • Compatible with 315 MHz or 390 MHz garage door openers manufactured after January 1 1993.
  • For use with gate operators commercial door operators or other products that are 315 MHz or 390 MHz and have a Learn Button.
  • Includes 3V battery (CR2032)
  • Same as 953CB
890MAX Manual
BOARD065

Manaras Replacement Circuit Board (No Monitoring)

  • Replacement kit that includes BOARD060 (control board) & BOARD066R (power board)
  • For all Manaras operators built before October 2010
  • For newer models built after October 2010 use BOARD070 or replacement kit BOARD075
Installation ManualManuel d'installationReplacement ChartGuide de remplacement
SPREADER001

Chain Tensioner for 1" shafts

  • Chain spreader for installation with 1" operator shaft & 1" door shaft.
  • Includes 2 shaft collars and set screws.
  • Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing
Installation instructions
5377.115

Whiting Side Seals 1/2" Track Spacing 115" Long

  • Most common side seal for Whiting Dry Freight doors.
  • 115 inches will fit almost every size door.
ACT-34B

Linear 4-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Supplied with quick-disconnect key ring
  • Power: Two CR2016 batteries incl.
  • Codes: Factory block coded in MegaCode format
  • RF frequency: 318 MHz
  • Dimensions: 1.25" W x 2.25" H x .48" D
    • .......more details
Programming Instructions
25-42-130

Extension Spring 7' Door - 130 lbs Yellow

  • Double - Loop
  • 25" long 42" stretch 130 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-20303

Truck Door Cable Drum and Bearing Roadside (LH) for Whiting Roll-Up Doors

  • Black nylon drum with bearing
  • Cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines Left or Right drum (Left = Red)
  • Cross Reference: 2547
DM4X8

Cable Drum Standard Lift 8' 400-8 Pair

  • 8' Standard Lift aluminum die cast alloy.
  • Pair includes: (1) LH and (1) RH Color coded: Red=LH and Black=RH
  • Max. Door Height: 8'-1".
  • Rated Lift per Drum: 265 lbs
  • Max. Cable Diameter: 1/8"
  • Mounting: 1" tube or solid shaft with 1/4" keyway
    • .......more details
HD8460-200

T-Handle Cable Lock System 2"

  • Complete cable locking system for a 2" door.
  • System includes: Auto Latch Striker Keeper T-Handle keyed with 4-1/4" shaft Inside release handle 3/32" cable and all required hardware.
  • Also works for for 1-3/4" doors
LA400DC-S

LiftMaster Residential 24VDC Linear Actuator Secondary Arm Only New Model

  • Secondary Arm Only for LA400
  • All new arms are backwards compatible with the previous model but the LiftMaster branding is different
Installation ManualManuel d'InstallationSell Sheet
SPR41B9X5/8

Sprocket 41B9 x 5/8" Bore 3/16" KW 2S 1/4-20 CR

DM54LC

Cable Drum High Lift 54" 400-54HL Pair

  • 54" LC High Lift-LD Aluminum die cast alloy.
  • 3/8"-16x2" hardened cup point set screws installed with red heads.
  • Color coded: Red-LH and Black=RH. Maximum High Lift: 54"
  • Maximum Door Height: 120" + High Lift
  • Rated lift per drum: 275 lbs 550 lb per door max
  • Maximum cable diameter: 5/32" max
    • .......more details
50030

Doorlec Key Switch with Spring Return in Waterproof Housing

  • Weatherproof start key switch
  • Nema 4 enclosure.
  • Cast aluminum base with tamperproof aluminum cover
  • Rating: 10 amps 124VAC
  • Contacts: Single pole silver alloy momentary contact
  • Two keys supplied with each switch
    • .......more details
E/1929/070

Automatic Systems Spare Arm 14'-9" (BL229)

  • Used on the BL229 gate op.
5-36-7

2" Vertical Track 14-GA 12'-4" (13' door) Sold per Pair *** No Longer Available

104100

FAAC Hydraulic Swing-Leaf Gate Operator S450H 24VDC

  • Hydraulic operator for residential and condominium swing gates with single-leaf max width of 3 m (SB) and 2 m (CBAC).
MOTOR259

Manaras Electric Motor TEFC 1HP 120/240V 1PH

BRACKET204

Manaras OSHW Fork Pivot Bracket

LB410-14SF/P1

Steel Faced Laminated Bumper Black 10" x 14" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
E/1929/025

Automatic Systems Bumper and Limit Switch Ass'y (BL229)

  • Used on the BL229 gate op.
SPR50B42X138

Sprocket 50B42 1-3/8" KW 2SS 5/16-18

  • 42 tooth sprocket for #50 chain
K41-0243-000

LiftMaster Output Sprocket IHSL24UL

  • Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators
BOARD076R

Manaras Replacement Power Board

  • Used on all Manaras circuit board type operators
A22K

Erone Krypto 2-Door IP Controller

  • The ATRIUM A22K two door IP controller works perfectly with the most popular Wiegand card readers or with the embedded KRYPTO high-security solution providing the best of both worlds in access control.
  • KRYPTO is the easiest solution to manage DESFire® EV2/EV3 smart credentials on the market making worries of card cloning a thing of the past.
  • The auto restore of encryption keys upon power failure ensures an effortless system start up and management.
  • Additionally the A22K can easily be converted to an Elevator Controller (A22KEC) Schlage Door Handle Controller (ADH2K) or Aperio Door Handle Controller (A2PK) as needed.
  • Controls 2 doors / 4 readers (entry/exit per reader port)
  • Add more A22Ks to expand your system up to 500 doors
    • .......more details
Wireless System Chart
JHDC12X1BMC

LiftMaster MAXUM Jackshaft 3/4HP 120/240V 1PH DC Operator 60 Cycles/Hour 1200LB

  • DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
  • Drive Type 65:1 Gearbox with #50 Chain Output
  • Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls
    • .......more details
JHDC_Installation-manualJHDC_Manuel-installationData sheetFiche techniqueQuick connect guideGuide de connexion rapideOrdering guideSprocket recommendation
RGL-CTL

LiftMaster Compact Red/Green Traffic Light 12-24V LED

  • The LiftMaster Hi-Intensity Red/Green LED Traffic Light is designed for use in both indoor and outdoor applications where signaling and traffic control are required.
  • The Traffic Light puts out hi-intensity red and green beams that are well suited to areas that require a controlled field of view for narrow lane signaling and daylight visibility.
  • The Traffic Light is compatible with Logic 3/4/5.0 operators that can accommodate the TLS1CARD and RDGRNCARD
  • Supply Voltage And Current: 15-30 volts DC preferred AC acceptable
  • Connections: Integral 4-Pin Connector with pig tail
  • Operating Temperatures: -40° to +50° C (-40° to +122° F)
    • .......more details
AUXREL

LiftMaster Auxiliary Relay Board MAXUM

  • For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators
Configuration
41176R

Genie Shaft Assembly Kit 6070/6170

EMX-1915-1

EMX Single Grey Hood For IRB-MON2/4X2 1 Piece Only

  • Grey coloured metal hood (1 hood)
BEA-10EARA

BEA Rain Hood for Eagle Artek Black

  • Rain hood only
210346

Skylink Tube Rail Belt 7ft Door

  • Replacement belt only
DC7AH

LiftMaster Battery for MAXUM Integrated BBU DC Units 7AH

  • For use in Liftmaster MAXUM DC Commercial BBU ops
  • 7 AMP
  • 20 cycles when fully charged
CAPXS

LiftMaster Smart Video Intercom - S

  • Designed with small multi-tenant buildings and single family gated homes in mind.
  • With the myQ Community app residents can see who is at the door before granting/denying access.
  • Integrated wide-angle camera: Lets you view entrance through a live feed or recorded event.
  • Integrated BLE radio enabling myQ Mobile Credentials: Ultra-secure encrypted access with the resident’s smartphone.
  • Cloud-based security: Keeps data protected and safeguards residents’ information. *All LiftMaster Smart Access Solutions (including CAPXLV CAPXLV2 CAPXM CAPXS CAP2D and CAPAC) require monthly subscriptions to a myQ Community plan.
DS-REPAIR-KIT

Inflatable Dock Seal Patch 30" x 30" Vinyl with Glue

CRBH753L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Right Hand

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
HSLG-411

Linear Commercial Slide Gate Operator 3/4 HP 115V 1 Ph - Heater not Included

  • Great for industrial and commercial applications
  • Features the APeX control board
  • Emergency manual disconnect handle
  • Powder coat finish
  • Post mount standard; pad mount optional
  • Integral entrapment sensing system with dual multi-turn precision potentiometers for accurate adjustment and enhanced safety
    • .......more details
LVB420-11/P1

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
Specification Sheet