Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
ME110-M-2W-BLK-E

Miller Edge Monitored 2-Wire Black End Outlet 7/8" wide x 3/4" high Sold by the Foot

  • Electromechanical slide in edge for counter shutters rolling doors and barrier arm applications.
  • Touch sensitive signaling that allows for immediate stopping and reversing of motion.
  • Temperature range -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Worksheet
RCB-60100

Roller Chain Break #60 thru #100

AM-PC-CUSTOM

Linear Proximity Card SecuraKey Custom Coded Linear Format ACP00739C

  • The Model AM-PC Proximity Card is a Wiegand format proximity type access control card with a slot for attaching to a key ring use with AM-PR proximity reader.
  • Passive operation
  • Low-cost
  • Durable
  • Custom Coded. Must provide Facility Code and Start #
  • Dimensions: 3.4" L x 1.9" W x 0.13" Thick
    • .......more details
LEVER063

Manaras Carrier Disconnect Bracket

TSTRIP001

Manaras 12-Pole Terminal Strip

LEVER092

Manaras Close Limit Actuator

MS-00007

Micanan Trolley Track Set 12 Ga. 18'6" (for 16' h. door) Includes 2 Angles Only

  • Set includes 2 tracks only
  • Chain NOT included
OTH-6113-AM06-M

Manaras Silencio APT Operator 3/4HP 120V 1Ph ECB Monitored with Photoeyes

  • The OTH-AM06 is a silent apartment style low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • 100 cycles per day
  • 3/4 HP operators come with # 41 roller chain
  • Ceiling Mount only 7.36" headroom clearance required below the tracks
  • UL325
    • .......more details
1003-3.5"-200FT

Bottom U-Rubber 3.5" Black 200' Long

  • 200ft spool of vinyl insert.
D-2-6-KA

Keyed Disconnect Device 6ft Cable Keyed Alike (Special Order)

  • Operated from the outside to disconnect the trolley for manual operation of the door
  • Must specify if keyed alike is required or keyed random will be shipped
  • Mounting plate dimensions: 2 1/2” x 1 3/32”
HW-KEY-SQ-316058

Lynx Straight Key 3/16" x 5/8" Long

Q055

LiftMaster Limit Switch Kit K75-50189

  • Also known as: Q166 Q165
PIN007

Manaras Slotted Spring Pin 3/16" x 1-1/2"

99000568

Amarr Bottom U-Seal 3.5" Gray Vinyl 1/4" T 200'

  • 1/4" T width
  • Used on Strat 3000 Herit 3000 and Commercial (exceot 1350 & 2700)
169027

Euro Side Hinge (25234) Zinc Plated

  • Steel Zinc plated
  • Thickness: 0.098"
  • Pin: 0.275"
  • Mounting holes 0.275"
  • Use with Euro center hinge #169026
HARNESS099

Manaras Opera ECB070 12 Pin Conn Wiring Harness

HYBRID-BLK-16

Residential Side & Top PVC/Aluminum W/S with cap 16' Long (193") - Black

  • Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with aluminum slide-on cap to hide screws.
111-0061

RW Box Track #33 Black 10ft

  • Finish: Black enamel
QW210

NTE Flameproof Resistor 1/4 Watt 1 kohm 250 mW Axial Lead Sold Individually

MA002

LiftMaster Connector 12 Pin

  • Removable connector also known as MA-002
SR-9004-BLACK

Elton Reverse Angle Clip-On Vinyl Black 200ft Roll

  • Side Use – Clips onto Steel Jamb
  • Also for Residential Use
T107

Manaras Trolley Track 7ft for 3/4HP models #41 Chain *Actual length 114"*

  • For models MGT/OTH/OTBH 3/4 hp only with Chain #41
MO00034

Micanan Brake Compression Spring (5/16" ID)

7-22-1

Replacement Cylinder Zinc Includes 2 Keys

  • Includes 2 keys Screws Backer Plate and Outer ring
BOARD003

Manaras Repl. Circuit Board MA-50 110V Lite Duty

  • Used on model MDTB
MGH-6236-ECB-RH

Manaras 2 HP 208V 3P Jackshaft ECB Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MA006

LiftMaster Mega Arm Chassis

  • Sturdy aluminum construction
  • For LiftMaster MADCBBC MATDCBB MASTDCBB commercial parking gate operators
7-10-1

Double Slide Lock

3250

Deadbolt Diecast Case Lock Set w/2 Keys

  • Includes mounting hardware
  • Includes 2 regular keys (not Master keyed) Schlage keyway
  • For use on doors up to 2" thick
27091A

Genie Limit Worm Gear for PMX500

  • Limit worm gear sits in the Limit switch plate and works with the Limit Worm Drive to activate the limit wheel
  • Works With Genie Models PMX 500-IC/B IC250/B
111421.0003

Overhead Limit Module RSX

CP1L-L14DR-A

Programmable Omron Automate 14 E/S ** Price by Quote Only

  • Works on BCSI-HV 240 single phase
14-1002

PVC Roll 8" x .120" Standard Smooth 200' for Replacement Strip Curtain

  • Suitable for most average applications.
  • Temperature Range: -20°F to 150°F (-28° C to 66° C).
  • Formulated with ingredients that meet USDA requirements for incidental food contact.
3BXT-RED

Replacement Button/Switch Only - Red

  • Replacement button for 3BXT
16-8001

LiftMaster Cogged Vbelt 4L 34"

  • This is a replacement Belt (4L340).
  • Compatible with LiftMaster® Model BG770 Barrier Gate Operators.
XBA6

NICE LED Arm Light Kit 6M

41D8257

LiftMaster Cover Only for 8550W

  • One piece cover is compatible with LiftMaster Model 8550W Elite Series
26665

Doorlec Drive Shaft 1" x 19" Stress-Proof SGP

XT-1H

Linear 1-Channel Hand-Held Mid-Range Transmitter ** To extent of inventory

  • Up to two miles of line-of-sight range
  • RF transmit LED
  • Push button activation
  • Includes belt clip
  • Antenna included
  • Power: Two 9-volt batteries
    • .......more details
BT501L5-BQ

LiftMaster 1/2 HP 115/230V 1p Commercial Trolley Op. wi/ Brake and Slow Speed Mod Installed Logic 5

  • Low profile trolley operator with brake and slow speed modification installed
  • Comes with #48 roller chain
MEFF-PAIR

Miller Edge Funny Flaps for MC22 Sold as a Pair

  • Funny Flaps for use with the MC22 Sensing Edge and are a great fit for an application where extra sensitivity is needed
  • They're necessary to fill the gap between the edge and guide within the sensing edge system and their flexible durable construction offers an alternative to more rigid standard sensing edge setups.
11-10014

LiftMaster Clutch Shaft

  • Commercial door opener clutch shaft
  • 11 7/8" Long; 1/2" Wide
STRUT-3-30'

Door Strut 3" Hemmed 30ft Long

  • Reinforcement bar 3"
M-0131

Autogate Proximity (Limit) Switch

M-0133

Autogate Proximity Magnets

C-24X10-134-W

Thermal Window 24" x 10" for 1-3/4" Door White

  • For 1-3/4" thick door
C-24X12-134-BLK

Thermal Window 24" x 12" for 1-3/4" Door Black

  • For 1-3/4" thick door
41D8260

LiftMaster Cover 8355W

  • A one piece LiftMaster® "Silver" Replacement Cover.
  • For use with LiftMaster® 8355W Series AC Belt Drive WiFi® Garage Door Openers
MGR20-Y-2U-PER-FT

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet Sold Per Foot

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
  • Non-monitored edge
  • Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)
MD-00338

Sprocket 40B15 1" Bore 1/4" KW 2SS

  • 15 tooth sprocket for #40 chain
109904

Amarr Snap Latch Supply Bag for 2" Thick Doors

  • Is needed when 105380: T-Handle Lock Kit for 2" thick doors is order or the lock won't work.
10.1003.150

Whiting Step Bolt Stainless Steel 1-3/8"

P-0129/RH

Autogate Retro Bracket Right Handed System

  • This is needed to change over to their current motor
105381

Amarr T-Handle Lock Kit for 1 3/8" Thick Doors Black *** Price by quote only

  • includes exterior & interior locking device with keys
  • this item is requires for use with lock bar or cable snap latch components
  • Need to order 109290 which is the hardware needed for installation or the lock won't work.
41A4353-1

LiftMaster Header Bracket and Clevis Pin

PRO-GH-15011U-RH

Micanan 1.5 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
BPPB17524

Garex Bottom PVC Moulding White for 1 3/4" Door U shaped 289"(24')

ME112-C3

Miller Edge L-Shaped PVC Mounting Channel Sold by the Foot

F400-1

FAAC 400 Hydraulic Swing Gate Operator Kit 115V dual swing gate

  • Kit includes: 2 FAAC operators 2 internal stops 1 control board 1 enclosure 1 photocell pair 2 copacitors 1 transmitter and 1 receiver
  • Max Gate Length: 16
  • Max Gate Length w/ External Lock: 23
  • Maximum Force Output: 1740
  • Duty: Continuous
  • Cycles Per Hour: 80
    • .......more details
TRACK-SET-2STD-10

2" Tracks Set 10'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

MD00019

Micanan Sprocket 50B40 X 1" 1/4" KW 2SS 5/16

19-48055MB

LiftMaster Limit Chain Assembly #48 x 55

  • Fits the SL575 & SL585GL gate operators
  • Same as K19-48055MB
30004

Doorlec Brake Solenoid 460V with wire leads

12501

Doorlec Clutch Plate Aluminum 4" dia x 1" bore

  • Works with models EHJ and ETBH
VMD202-50

EMX Vehicle Motion Detector Probe with 50ft Lead Wire

  • The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
  • The probe and its electronics are housed in a slim design that is buried next to a driveway.
  • The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
  • Probe assembly and wire are water tight and direct burial compatible
  • Harness is pre-wired onto lead wire for easy installation
  • Settings are placed in a non-volatile memory in case of power failure
    • .......more details
T-831

FL-Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 311 MHz 107483

  • Open/Close/Stop stationary remote for 1 door.
  • Designed for commercial automatic door and gate operator applications.
  • This transmitter can operate a single receiver connected to one operator
  • Compatible with 3-channel Allstar and MVP receivers
  • Easy access to battery and coding switch
  • Power: 9-volt battery
    • .......more details
218-45-10

PVC Connector for 3/4" - 3/32" RAH

CP-SH-58-1012

Lynx Center Shaft Only for MCJH 5/8" x 10-1/2"

SPGAP06400A

NICE Replacement Nylon Insert Kit

30001

Doorlec Brake Solenoid 575V with wire leads

PTRR5-C

Telco Light Curtain Fastening Clips 3 pcs/Bag

31355

Doorlec Sprocket 80B14

37380

Doorlec Auxiliary Contacts BF9 Contactor

MZ-00005

Micanan Synthetic Oil in Reducer Cold Temp. Mod.

  • For models PRO-GH GHC GT and GSD
41D0277-1

LiftMaster Transformer WiFi Battery Backup

  • For Wi-Fi Battery backup garage door openers; manufactured after 2011
  • Same as #204D0277-1
SGP-321-1-230/1

Doorlec Gate Master 1 HP 230V 1 Phase with Heater and Lights in Cabinet

  • Post mount heavy-duty industrial slide gate operator
  • Max. gate weight: 2500 lbs
  • Gate travelling speed: 45 ft / minute
  • 175 watt heater included
31104

Doorlec Sprocket 41B23-5/8"

BBSI-BCSI

Insulated Cabinet Option for BCSI Gate Op ** Price by Quote Only

PRO-GHC-10053U-L

Micanan 1 HP 575V 3P Gearhead Operator with N1 Eyes Monitored ECB Left Hand

  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • Full function Smart 10.0 logic board and on-board receiver
    • .......more details
CP-SH-58-1038-HDC

Lynx Complete Limit Shaft Assembly for HDC

  • 5/8" x 10-3/8"
  • Same kit used for MCJH except the HCT has 1 extra nut
2000P

LiftMaster HD Roller Cage Bearing Hinge Flat Mount Prime Coated Sold in Pairs

  • Heavy Duty Construction for Maximum Durability
  • Dependable Roller Cage Bearing Design
  • Even Weight Distribution
  • Five Times The Weight-Bearing Surface of the Nearest Large Hinge
  • Largest Weld Surface in the Industry
  • Easy to Fully Lubricate
    • .......more details
PRO-X_MOD-5HP

Micanan Explosion-Proof Modification N-7/N-9 for 5HP

  • Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.
PRO-4X_MOD_3HP

Micanan Nema 4X Modification 3HP

  • This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
  • For options M & U Micanan N-4X photocells are supplied
  • For 3HP motors
111421.0004

Overhead Limit Module

.406-514-L-C

Cut-to-Length Torsion Spring .406 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.363-514-L-C

Cut-to-Length Torsion Spring .362 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-514-INSTALLED
.306-514-L-C

Cut-to-Length Torsion Spring .306 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.250-334-L-C

Cut-to-Length Torsion Spring .250 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.250-258-L-C

Cut-to-Length Torsion Spring .250 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.243-258-L-C

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.243-134-R-C

Cut-to-Length Torsion Spring .243 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.225-258-R-C

Cut-to-Length Torsion Spring .225 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.207-258-R-C

Cut-to-Length Torsion Spring .207 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.207-258-L-C

Cut-to-Length Torsion Spring .207 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
PRO-GH-7583U-L

Micanan 3/4HP 208V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-GH-7521U-L

Micanan 3/4HP 230V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-GH-5081U-R

Micanan 1/2HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
FDRCARD

LiftMaster Option Card Solid State

PRO-HHD-5043U-R

Micanan 1/2HP 460V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 1/2 HP460V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation Manual (EN) Specification Sheet
PRO-HHD-5023U-L

Micanan 1/2HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 1/2 HP230V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation Manual (EN) Specification Sheet