Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

1007-1-5/8-16'

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 16'2"

  • For door thickness of 1-5/8" to 1-3/4"
1006-1-3/4-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/4"
1006-1-3/4-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/4"
1005-1-1/2-24'

Aluminum Bottom Retainer U-Shaped 24' Long

  • For door thickness 1-1/2"
371LMC

LiftMaster 1-btn Security+ Transmitter 315MHz **To Extent of Inventory

  • Visor clip and 3V lithium button cell (CR2032) battery included.
1003-2-16'

Aluminum Bottom Retainer L-Shaped 16' Long

  • For 2" thick doors.
1003-1-5/8-12'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
1003-1-3/8-10'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
TC1

Tri-Code Transmitter 1-btn Visor - DISCONTINUED

  • 10 dipswitch format 3-position slide switch
  • Compatible with Multi-Code 300 & 310 MHz Delta3 & Stanley 310 MHz
  • Discontinued 7/1/13
1104-7FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 7' Long - Brown (N)

  • Brown rigid vinyl retainer with brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
RCB-2560

Roller Chain Break #25 thru #60

  • Replacement tip included.
18-RWB-PAIR

Winding Bars Round 18" Set of 2

  • Cold rolled hardened steel.
  • Machined to 7/16" at one end with 1/2" outside dia. on the other.
  • Sold as a pair.
1104-7FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 7' Long - Cream (C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Almond
7001-18-WHITE

Commercial Side & Top Weather-Strip 18' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1102-16-BLACK

Commercial Side & Top Weather-Strip 16' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
1102-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
27-20400

Truck Door Bracket for Torsion Assembly Roadside (LH) for Todco Roll-Up Doors

  • Steel construction
  • Zinc plated finish
  • Cross Reference: T #51036-2 W #4028 360000
27-20306

Truck Door Balancer Bracket Clamp for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Clamp includes nuts
  • Cross Reference: W #2526 for both #2376 & #7176 balancers
DM28VL-125

Cable Drum Vertical Lift 28' 1350-28 (1-1/4") Pair

  • 28' Vertical Lift aluminum die cast alloy for 1-1/4" shaft.
  • 3/8"-16 x2" hardened cup point set screws installed with red heads. -
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
  • Max. Door Height: 28'-1".
  • Rated Lift per Drum: 1100 lbs.
  • Max. Cable Diameter: 1/4".
  • .......more details
H11G07

Hinge #7 x 11 gauge

  • 11 gauge # 7 hinge - 0.83 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
EP2984

Exhaust Port 4" with latch long barrel ** Discontinued**

  • 4" inside diameter 2" sleeve with latch.
  • Includes fasteners & gaskets.
  • Polished aluminum finish.
EP2987

Exhaust Port 6" with latch long barrel ** Discontinued

  • 6" inside diameter 2" sleeve with latch.
  • Includes fasteners & gaskets.
R5211

Cast Iron Pulley 5" with stud

  • 5" Cast Iron Pulley with double stud
  • cast iron pulley mounted on two pressed sealed bearings
  • Maximum cable diameter: 1/4"
R5210

Pulley 4" Zinc Plated Steel with Sheave Strap

  • Bored for 3/8" diameter bolt
  • Maximum cable diameter: 1/4"
  • Hardened inner race
  • Includes fork
846CABLECL

Cable Clip - 14GA

  • Cable Adjustment Clip
  • 3 hole pattern
  • Used to attach a cable to the S-hook on an extension spring system
  • Same as part number 423
903021ORBG

Operator Reinforced Bracket 21" Galvanized

  • Comes with clevis and clip pins. 24 per carton
BK312

Jamb bracket J-12 #12 12 gauge

  • Sold by the piece
  • Height 5.0" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot accepts 5/16" track bolts
25-10103

Truck Door 2" Sealed Roller Steel for Whiting Roll-Up Doors

  • Zinc plated finish 10 roller ball design
  • Shaft Length: 2.62" Overall Length: 3.41"
25-10100

Truck Door 1" Steel Roller 2.5" Shaft Length for Todco Roll-Up Doors

  • Zinc plated Hardened shaft and raceways
  • Seven roller ball design
  • Cross Reference: T #61174 T #69162 W #4026 W #4027 291000
  • Box quantity: 25
6X12SC50

Devanco Loop 6' x 12' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
2'6X6PO50

Devanco Loop 2'6 x 6' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
4X33PO50

Devanco Loop 4' x 33' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
CADROLL

3" Stainless Steel Carwash Roller 7" Stem ** To Extent of Inventory

  • Stainless Steel Shaft no bearing design
  • Roller made from NMW plastic which is more wear resistant that steel because it causes less friction
  • Rated for 200 000 cycles
  • Pound Load: 145 lbs
32-48-180

Extension Spring 8' Door - 180 lbs Gold ** Replaced by 27-48-180

  • Double - Loop
  • 32" long 48" stretch 180 lb load
  • Springs sold individually
WB-400-24V

Audible Warning Device Exterior Surface Mount 24V

  • 6" bell 85 DBA
SLT2-22

Rolling Steel 2" Crowned Slat 22-ga Galvanized

.437_5-1/4"-LH

Torsion Spring .437 x 5-1/4" x 12ft LH Red/Green

  • Wire size: .437
  • Inside diameter: 5-1/4"
  • Length: 12 ft
PRO-TB-7543-U

Micanan 3/4HP 460V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
TC134-10

Top Cap 1-3/4" 10 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
4007-7FT

Aluminum Retainer only for Light Brush 90 degree

  • For angle application
  • For use with Light Brush or Vinyl Insert.
12FT-TROLLEY-SET

LiftMaster 12' Track Set for Trolley Operator 10-5812-P (2pcs) *Actual length 179"*

  • Actual length: 179" (14' 11")
2650-112-11

Linear Cold Weather Package HSLG 230V

  • Factory Option 2650-112-11 Cold Weather Package for 230-volt HSLG
  • Package includes: Arctic Oil Heater Cogged Belt
  • This factory option is only available for purchase when buying your gate operator.
PBS3-RED

Replacement Button Only - Red

  • Replacement button for 02-403P
GH303L5-RH

LiftMaster Gearhead with Brake 3 HP 208/230/460V 3-Phase Logic 5

  • Includes CPS-U photoeyes
9150000670

Extension Cable 1/8" 7x7 14' Sold as a Pair

  • Cable assembly for extension spring door - looped one one end the other is raw (no stops)
11-3602_SHAFT

LiftMaster Idler Shaft (1)

  • Fits SL595
  • Two are required per operator
GDI-HB311

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1-1/4" Shaft UL-325 Photo Eyes Extra

  • Compact & Light Weight - Fast Installation
  • Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
  • Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
  • Soft start soft stop
  • .......more details
HD3130

End Stile Latch 7-1/2" Lockbar Length

  • Lockbar Length: 7-1/2"
  • Throw: 2-1/8" Use with: Lockbar or End Stile
  • Centerline Distance (key spindle to handle shaft): 2-3/4".
  • Handle in Bright Chrome Finish Latch in Bright Zinc Plated steel.
15-41B18LGH

Sprocket 41B18T 1" Bore

  • Also known as: 155016 41B18
  • 18 Tooth Sprocket #41 Chain (41B18)
  • Includes 2 Set Screws
C-26-1/4X14-134-W

Thermal Window 26-1/4" x 14" for 1-3/4" Cedo Door White

  • For 1-3/4" thick door
MA002

LiftMaster Connector 12 Pin

  • Removable connector also known as MA-002
MV-00007

Micanan Single Button Nema-4 Pushbutton Control Station

  • Surface mount
  • Non-Metallic Enclosure
  • Double Pole Contacts
  • Dimensions: H=3-1/4"" W=2-3/4"" D=2-1/2""
.437_5-1/4"-RH

Torsion Spring .437 x 5-1/4" x 12ft RH Red/Green

  • Wire size: .437
  • Inside diameter: 5-1/4"
  • Length: 12 ft
2705.171_250

Whiting Curbside Torsion Spring 2-3/16" ID 25" Long

  • Torsion spring wire only
  • .171 wire size
SEL2641R433-Z4-F

Erone 4-Relay Stand Alone Mini Receiver Fast 433MHz

1104-7FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 7' Long - White (W)

  • White rigid vinyl retainer with white flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
.406_5-1/4"-LH

Torsion Spring .406 x 5-1/4" x 12ft LH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 5-1/4"
  • Length: 12 ft
PRO-HBH-10023U-L

Micanan 1 HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

  • 1 HP230V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • .......more details
2100-1661

Linear Plate Torque Limiter VS/GSLG-A

.283-134-R

Cut-to-Length Torsion Spring .283 x 1-3/4" Right Hand Wound White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
PRO-GH-7511U-R

Micanan 3/4HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • .......more details
SG-13-NC

Telco Light Curtain with Rectifier Normally Closed 72" (13-193-028-D1-E-H59C-5) ***No Longer Available

  • Normally Closed
  • SGR13-193-028-D1-E-HS9-5
  • SGT13-193-028-D1-E-01-15
  • 1928mm housing 1800mm active height 28 channels NC relay output 15m cable
G220-1

Heddolf 1-btn Genie Compatible Remote 9 or 12-Dip Switch 390 MHz

  • Genie compatible transmitter
TRACK-3"-RAW-12

Raw Vertical Track 3" 12'-0" Sold per Piece

.218-2-R

Cut-to-Length Torsion Spring .218 x 2" Right Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
PRO-HB-5053U-LH

Micanan 1/2HP 575V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
OPH-6532-0M00

DELETE - OLD CODE CREATED A NEW ONE TO REPLACE.

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
Q310

LiftMaster Surge Protection for MIR-1 ( K74-50271) ** DISCONTINUED

  • For the Miracle-One single arm gate operator
  • Same as part no. K74-50271
4A1344

LiftMaster Light Socket Plastic (41C279)

GALV-283-2-L

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
6589

WhitingBrush Side Seal assembly for insulated doors

  • Fits Coldsaver and Tempguard
37561R

Genie Belt and Bullet Assembly 7ft

  • For 7' Tall Doors Only
  • Fits the following models: IntelliG 1000 (3024) IntelliG 1200 (4024)
  • SilentMax 1000 (3042) SilentMax 1200 (4042)
TRACK005

Manaras 1 Piece Galv Track 2x2x16'6 ** 1 pc Only

  • 2 pices are required to make 1 set of tracks
  • Does NOT include the chain
25-42-50

Extension Spring 7' Door - 50 lbs Red

  • Double - Loop
  • 25" long 42" stretch 50 lb load
  • Sold individually
  • Rated for 10000 cycles
  • Same as part number 105
.192_2"-LH

Torsion Spring .192 x 2" x 12ft LH Silver

  • Wire size: .192
  • Inside diameter: 2"
  • Length: 12 ft
CP-ARM-NEW

Lynx Auto Re-Connect Carriage Arms Only New Style 14-1/2"

  • Arms only for CP-CRG-NEW
.283_2"-RH

Torsion Spring .283 x 2" x 12ft RH White

  • Wire size: .283
  • Inside diameter: 2"
  • Length: 12 ft
RA-AD-T3

Lynx 3-btn Transmitter AD455 372 MHz ** Discontinued

  • UL325
  • Works on the new Lynx operators
  • For 3 doors
831-RJ

Allstar 1-Door O/C/S Receiver in Oil Tight Case (JIC) 107478 318 MHz *** To extent of inventory

  • Three channels - three relay outputs
  • Oil-tight JIC ABS case
  • Terminal strip for wiring
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • .......more details
ETB-311-1/2HP

Doorlec 1/2HP 115V Trolley Door Opener TEFC Motor

  • Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.
  • DC2000 Logic Controller
  • Comes with standard O/C/S push button station
MWR22B

Miller Edge 2-Channel Wireless Edge Receiver RF 318 MHz

  • Power source: 12-24 volts AC/DC nominal Nominal 60 mA 140 mA activated
  • Output: N.O. N.C
  • Wire connections: Integral 18” wiring with #6 spade lugs
  • Antenna: Attached wire or F connector
  • LED Indicators: Power channel 1
  • Polycarbonate enclosure
  • .......more details
801-300-001-01

Equinoxe Long Range Receiver 1-Door 433 MHz New Generation

  • 1000 ft range
  • 2016 +
  • This receiver will accept 8 equinoxe O/C/S remotes
MGH-6236-M-N1-LH

Manaras 2 HP 208V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6535-M-N1-RH

Manaras 1.5 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6535-M-N1-LH

Manaras 1.5 HP 600V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6235-M-N1-RH

Manaras 1.5 HP 208V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6115-M-N1-RH

Manaras 1.5 HP 120V 1P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6233-M-N1-LH

Manaras 3/4 HP 208V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6213-M-N1-RH

Manaras 3/4 HP 240V 1P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
RGH-6814-MON-RH

Manaras 1 HP 208V 1Ph Rapido Gear Head Op. Monitored ECB Right Hand

  • Rapido version of model OGH
  • Includes PHOTO-061 Monitored N4X Thru-Beam eyes
RGH-6214-MON-LH

Manaras 1 HP 240V 1Ph Rapido Gear Head Op. Monitored ECB Left Hand

  • Rapido version of model OGH
  • Includes PHOTO-061 Monitored N4X Thru-Beam eyes
OGH-6233-M-N1-LH

Manaras 3/4 HP 208V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
  • .......more details
PRO-HBHW-7581U-L

Micanan 3/4HP 208V 1P Heavy-Duty Jackshaft N4 Eyes Monitored ECB Left Hand (Pro-HBHW)

  • 3/4 HP208V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • .......more details
OGH-6235-M-N1-LH

Manaras 1-1/2 HP 208V 3Ph Gear Head Operator with Monitored ECB N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
  • .......more details
OGH-6235-M-N1-RH

Manaras 1-1/2 HP 208V 3Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
  • .......more details
18009A

Doorlec Reducer 80:1

K41-0447-000

LiftMaster TECHNA Arm to Housing Cable

  • Arm harness
  • Universale for Techna
CLASSIC-R12

Garex Ready to Install Door Special Order

  • R12 Insulation - Short Panel only - Available in a selection of colours - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements
K76-37253

LiftMaster Electric Motor 1/8HP 24VDC for RSL12U

  • Replacement motor with improved brush assembly for RSL12U gate operators
OGH-6115-M-N1-LH

Manaras 1-1/2 HP 120V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
  • .......more details