Devanco Canada - Get The Right Garage Door Opener‎ and Parts

26-40402

Truck Door Reefer Side Seal 98" Long for Whiting Coldsaver

Co-extruded using PVC backing with flexible PVC seal against the door.
Cross Reference: W #7470

50695

Doorlec Clutch & Pulley Assembly for EHJX (Includes: 1 clutch shaft_ 2 bearings_)

Includes shaft and bearings

EL2000SSPKT

LiftMaster Pedestal Mounting Kit for EL2000SS

Compatible with model EL2000SS only.
Kit allows you to mount an EL2000SS unit onto a standard gooseneck pedestal.
Kit includes a mounting plate with gasket and hardware.

TB610-24SF

Steel Faced Laminated Bumper Black 10" x 24" 6 3/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

PRO-GH-10053-PNL

Micanan 1 HP 575V 3P Gearhead Operator NO CONTROLS

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

MB-02104

Micanan Electric Motor Only 3/4HP 230/460V 3PH TEFC

C-Flange motor fits: GT GH GHC GSD

ZAP-8830

Zap Battery Backup 8030/8830 *** QUOTE ONLY

8830 Battery Back up systems allows operation of the operator during power outages.

LB1012-12

Laminated Bumper Standard Black 12" x 12" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

ME00035

Micanan Limit Shaft Light Duty 3/8-1/2 x 8-1/2"

ALUM-5P4

Aluminum 24" x 100' Spool Metallic Gray / Gris Metallique # 5P4

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 5P4
Reverse side is #431 Bright White

Colour chart

GALV-283-258-L

Cut-to-Length Torsion Spring .283 x 2-5/8" Left Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

PULL-CHAIN

Pull Chain Spring Only 12" Long

Spring Only for pull chain device
Used with a hand chain for full vertical doors.
Eliminates the need for leaf bumpers

MP-00040

Micanan High Cycle Modification Jackshaft Models PRO-J / H only

For installations with high frequency usage
Double V-belt cast iron flanged precision bearings on all shafts and delay on reverse circuit
Supplied with #50 chain

R-831-E

FL-Allstar 1-Door O/C/S Receiver 110554-311 MHz

Commercial Open/Stop/Close receiver for one door.
If your operator can be controlled by three button station then the R-831-E receiver and commercial remote controls will work with your operator.
It is easy to set with its learn feature (no coding switch).
This receiver can accept up to 8 different operational codes.
Manufacturer's model number: 190-110554
Dimensions: 6 1/4" x 3 5/8" x 1 3/4"

.......more details

Programming Instructions

PRO-HB-7523U-LH

Micanan 3/4HP 230V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

GALV-319-334-L

Cut-to-Length Torsion Spring .319 x 3-3/4" Left Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

.312_5-1/4"-LH

Torsion Spring .312 x 5-1/4" x 12ft LH Yellow

Wire size: .312
Inside diameter: 5-1/4"
Length: 12 ft

.306_6"-LH

Torsion Spring .306 x 6" x 12ft LH Red

Wire size: .306
Inside diameter: 6"
Length: 12 ft

PRO-TB-5053-U

Micanan 1/2HP 575V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board

MV00295-A

Micanan Fraba Ray-RT UL325 Monitored Reflective Photocell Supplied in Lieu of N-1

Only available with purchase of operator

GALV-TEST-CUT-TO-LENGTH

Cut-to-Length Torsion Spring .225 x 2-5/8" RHW Galvanized Orange/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

BPPN17512

Garex Bottom PVC Moulding Black for 1 3/4" Door U Shaped 120" (10')

OSHW-6532-M-N1-RH

Manaras Opera-SH with Carwash mod 1/2HP 600V 3Ph Monitored w/ N4 Eyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

MSJ-6213-M-N1-LH

Manaras MSJ 3/4HP 240V 1Ph Monitored Board w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
35 cycles per day > 150 cycles per day

.......more details

OTBH-6434-M-N1

Manaras Trolley Operator 1 HP 480V 3Ph Monitored w/N1 Photoeyes

The OTBH is a heavy-duty low headroom trolley operator
Designed for use on industrial standard lift sectional doors
It incorporates a drum-band type solenoid brake
25 cycles per hour 80 cycles per day
Includes PHOTO-070

MGT-6534-M-1

Manaras Heavy Duty Industrial Gearhead 1 HP 600V 3 Ph Monitored w/N1 Photoeyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

CLASSIC-R12

Garex Ready to Install Door Special Order

R12 Insulation - Short Panel only - Available in a selection of colours - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements

ME120-Y-2WIRE-E

Miller Edge Yellow 2-Wire NM End Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

PDC300-34-1-40-20-CH

Pulse300 Direct Drive Opener 3/4 HP 110/240V 1ph 1" Shaft 40:1 20' Cable ** Price by Quote Only

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PDC300-1-125-40-20-CH

Pulse300 Direct Drive Opener 1 HP 110/240V 1ph 1.25" Shaft 40:1 20' Cable ** Price by Quote Only

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PDC-300-050-1-40/63-20

Pulse 300 Direct Drive Opener 1/2 HP 1" Shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

33105

Doorlec Overload 3 to 5A

Setting range 3-5A

BGARM12ART98

LiftMaster TECHNA Barrier Gate Arm 12 ft w/98" Clearance without LED

12’ Functional length arm with an 98” articulated clearance height from the base of the arm
All parts ship in a single carton box for convenient transport and storage ensuring easy on-site assembly. The arm is field-customizable for added flexibility.
Made from durable aluminum extrusion with secure fasteners for a reliable fit. Arm joint uses bolts nuts and washers for stability and are reinforced by a torsion bar for added strength.
Operating Temperature: -13°F (-25°C) to 140°F (60°C)
Requires TECHNA PARKING operator

28-2103

Steel Bumper Extension Bracket 4"D x 20" Tall 12"W

4" deep (projection) x 20" tall x 12" wide

PDC-300-075-1.25-40-20

Pulse 300 Direct Drive Opener 3/4 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable ** Price by Quote Only

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

MOD027D1

Manaras Universal Aux. Output Module B070 Red/Green 24V w/Light Rapido Modification

MOD027B1 modification only when bought with operator
Order MOD027 when ordered in conjunction with a commercial operator
Works with BOARD070

RGHW-6214-MON-L

Manaras 1 HP 240V 1Ph Rapido Gear Head Carwash Mod Monitored ECB w/Eyes Left Hand

Rapido version of model OGHW
Includes Monitored Waterproof photocells

ME120-Y-2WIRE-L

Miller Edge Yellow 2-Wire NM Left Hand Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

26130

Doorlec Hoist Shaft Threaded 5/8" x 12" GH/GHX

Works on GH/GHX

RXTA-100

Pulse 2-Channel Receiver

Two-Channel Receiver: Can be programmed to operate one or two doors or for Open/Close or Open/Stop functions.
Universally Adaptable: Works with most available brands/models of transmitters (300-390MHz) including those with rolling code.
9-30Vac/dc input.
FCC approved.

026-122

Blue Giant Heater Element **Special Order

Price by Quote Only

PRO-HBH10021U-L

Micanan 1 HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

1 HP230V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

7-6134

RW Top Spring Bolt 514 x 3 1-1/4" sq x 9" Long

Bolt: Bevelled steel
Chain: Zinc plated 70" long with ring
Black Enamel finish

C715477300K-1.25

Governor 1.25" Bore 1/4" KW

SBR-N1-0L-H120

Micanan Brake Assembly for PRO-HBH LH 120V Solenoid included

Solenoid Included

2806.200.280

Whiting .200 x 2-3/16 x 28" Roadside with Cones

2376.206.35.940

Whiting Torsion assembly .206 wire size 35" spring length 94" shaft

7176.218*28.85

Whiting Heavy Duty Torsion Assembly .218 x 2" shaft 85"

2376.177*34.960

Whiting Torsion assembly .177 wire size 34" spring length 96" shaft

93519.5260

Todco Side Seal 80" long Lip ** Special Order Quote Only

Special Order item. Must be quoted each time
Fits Fleetstar Door

K17-36530

LiftMaster Gear Reducer and Motor Pulley

Includes gear and reducer pulley motor pulley
Includes dual-set screw fastener
Groove-lock channel on each pulley
For LiftMaster CSL Series commercial slide gate operators

K41-0082-000

LiftMaster HD Motor Replacement Kit

This service kit is compatible with the following models: HDSL24UL & HDSW24UL

3257

Whiting General Purpose Bottom Seal #80841

Quote required prior to sale to ensure correct fit

SUPPORT014

Manaras Board Snap Locking Support 7/16" ** Special Order Only

MC271-2W-RH-GRAY

Miller Edge MC271 2-Wire Non-Monitored Right Hand Gray Includes End Flaps - Sold per Foot

Ideal for Cornell double angle bottom bar
Flexible and will conform to floor irregularities
Optimum size for 2+ inch thick surfaces
Custom manufactured to user specifications for color length and outlet location
5-inch end flaps create a complete seal and can be trimmed for custom fit
Sealed assembly impervious to dust and debris

.......more details

PRO-HBH-7521U-L

Micanan 3/4HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

3/4 HP230V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

GAREX-24X12-WHTE

Garex Thermo Window Clear 24" x 12" White Frame

An original Garex window
Fits 1-3/4" thick door R16

GAREX-24X12-CBRN

Garex Thermo Window Clear 24" x 12" Commercial Brown Frame

An original Garex window
Fits 1-3/4" thick door R16

8071-080

DoorKing MicroPlus 3-btn Rolling Code Transmitter

Keychain style remote
Black
Not compatible with HomeLink
Dimensions: 2.5 x 1.5 x .5 inches

110968.001

Overhead Door Limit Shaft Kit RMX

B/CDJH-34-115-UL

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V w/ ECB and Solenoid Brake Right Hand UL325

3 Button station (NEMA 1) Photoeyes 1-Btn Transmitter
1650 RPM high starting torque motor with overload protection
Inherent Mechanical Brake (I.M.B)
B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
On board Open Close & Stop for ease of setting limits
Pre-wired to accept sensing devices

.......more details

GALV-250-258-L

Cut-to-Length Torsion Spring .250 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

2807.177*290

Whiting Spring Assby .177 x 2-3/16 x 29" Curbside

Replacement torsion spring with cones
Specs: .177 x 2-3/16" x 29" Long
For Roadside order part # 2806.177.290

GALV-273-334-R

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

3228.3

Whiting 2" Nylon Roller 3" Stainless Steel Shaft

This is a Whiting original roller

GALV-262-334-R

Cut-to-Length Torsion Spring .262 x 3-3/4" Right Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

2376.156.17.730

Whiting Torsion assembly .156 wire size 17" spring length 73" shaft

GALV-406-6-R

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Galvanized Blue/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

DWI-LOCK

Doorway Impact Monitored Slide Slock V2

Monitored Slide Lock for the DoorWay Impact Sensor (Impact sensor and air switch not included)
Connects to an Air/Impact switch to mechanically and electrically lock the door.

LJH-353-1/2

Doorlec 1/2 HP 575V 3PH Jackshaft Operator

Heavy duty industrial type control station open close stop 24V. control circuit
Universal mounting right or left
Floor level disconnect device electrical and mechanical
Emergency chain hoist operation on LJH model only
Colour code wiring diagrams
Rotary type limit switches readily adjustable in both directions

.......more details

K07-3611

LiftMaster Disconnect Bushing

Compatible with LiftMaster® SL590 Slide Gate Operators

44-60-160

Extension Spring 10' Door - 160 lbs

Clipped ends
44" long 60" stretch 160 lb load

GS-RA-01-BLACK

Guide Seal Reverse Angle Black Sold by the Foot

CAPXSTK

LiftMaster Trim Kit for CAPXS

Trim plate exclusively for installing with Model CAPXS – Smart Video Intercom S
Provides a clean aesthetic installation helping hide remnants of a previous installation.

2200-983-UPS

Linear Brake and Puck Assembly UPS HSLG

GUSSET-MOUNT

Doorlec Gusset Mount Plate Up-Charge (L Bracket) GH

Mounting plate for GH op

50018

Doorlec Photo Switch Polarized Explosion Proof Reflective w/Round Reflector

Class 1 Div 1 Groupes CDEFG explosion proof Certified CSA

WHITING-ST

Whiting Strap Mounted Inside Door Option

This is an add-on option when ordering a Whiting door

E/1929/094

Automatic Systems Left Bumper Ass'y (BL229)

Used on the BL229 gate op.

2704.177_13.5

Whiting Roadside Torsion Spring 2-3/16" ID 13-1/2" Long

Torsion spring wire only
.177 wire size

TDC7-10

Liftmaster Comm. 10FT Trolley Angle set (10-5810-P x 2) and #48 chain pack (TDC48-10)___ ***Actual length 155"***

Double Angle Rails for doors up to 10'6" high
Includes #48 chain pack

GALV-295-6-L

Cut-to-Length Torsion Spring .295 x 6" Left Hand Wound Galvanized Blue Price per Inch

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

GALV-250-2-R

Cut-to-Length Torsion Spring .250 x 2" Right Hand Wound Galvanized Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-273-334-144-L

Torsion Spring .273 x 3-3/4" x 12ft LH Galvanized Orange/Red

Wire size: .273
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-243-334-144-R

Torsion Spring .243 x 3-3/4" x 12ft RH Galvanized White/Yellow

Wire size: .243
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-243-258-144-L

Torsion Spring .243 x 2-5/8" x 12ft LH Galvanized White/Yellow

Wire size: .243
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

MOUNTSHAFT018A

Manaras Limit Shaft Kit MGH up to 1.5HP

For MGH MGT MGSL built from 2011 (Yellow C-Box) Limit chain size 410

SHAFT064

Manaras Limit Shaft 5/8"-24x12.5

15470

Doorlec Heater Strip 250 W 120 V

9003-200-9-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 9' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

MT21-YELLOW-LH

Miller Edge 2-Wire Pressure Sensitive Edge Yellow Left Hand Outlet Sold per Foot

��Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty