Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
RGHW-6214-MON-R

Manaras 1 HP 240V 1Ph Rapido Gear Head Carwash Mod Monitored ECB w/Eyes Right Hand

  • Rapido version of model OGHW
  • Includes Monitored Waterproof photocells
RGL-CTL

LiftMaster Compact Red/Green Traffic Light 12-24V LED

  • The LiftMaster Hi-Intensity Red/Green LED Traffic Light is designed for use in both indoor and outdoor applications where signaling and traffic control are required.
  • The Traffic Light puts out hi-intensity red and green beams that are well suited to areas that require a controlled field of view for narrow lane signaling and daylight visibility.
  • The Traffic Light is compatible with Logic 3/4/5.0 operators that can accommodate the TLS1CARD and RDGRNCARD
  • Supply Voltage And Current: 15-30 volts DC preferred AC acceptable
  • Connections: Integral 4-Pin Connector with pig tail
  • Operating Temperatures: -40° to +50° C (-40° to +122° F)
    • .......more details
RJDC7S1BEL

Liftmaster MAXUM Jackshaft with Manual Release 1/2HP 120/240V 1PH/3PH DC Operator 30 Cycles/Hour 700 lbs Left-Hand; 3" Output Shaft

  • High-efficiency DC motor provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Optional Battery backup sold separately (DC7AH)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
  • Drive Type 65:1 Gearbox with #50 Chain Output
  • Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls
    • .......more details
RJDC7S1BER

Liftmaster MAXUM Jackshaft with Manual Release 1/2HP 120/240V 1PH/3PH DC Operator 30 Cycles/Hour 700 lbs Right-Hand; 3" Output Shaft

  • High-efficiency DC motor provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Optional Battery backup sold separately (DC7AH)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
  • Drive Type 65:1 Gearbox with #50 Chain Output
  • Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls
    • .......more details
RJDC7S1N4XL

Liftmaster MAXUM with Nema 4X Jackshaft with Manual Release 1/2HP 120/240V 1PH/3PH DC Operator 30 Cycles/Hour 700 lbs Left-Hand; 3" Output Shaft ** Currently unavailable

  • Good for Carwash and Barns
  • Corrosion resistant
  • High-efficiency DC motor provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Optional Battery backup sold separately (DC7AH)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
    • .......more details
RJDC7S1N4XR

Liftmaster MAXUM with Nema 4X Jackshaft with Manual Release 1/2HP 120/240V 1PH/3PH DC Operator 30 Cycles/Hour 700 lbs Right-Hand; 3" Output Shaft ** Currently unavailable

  • Good for Carwash and Barns
  • Corrosion resistant
  • High-efficiency DC motor provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Optional Battery backup sold separately (DC7AH)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
    • .......more details
RJDC7S4N4XL

Liftmaster MAXUM with Nema 4X Jackshaft with Manual Release 1/2HP 480V 1PH/3PH DC Operator 30 Cycles/Hour 700 lbs Left-Hand; 3" Output Shaft ** Currently unavailable

  • Good for Carwash and Barns
  • Corrosion resistant
  • High-efficiency DC motor provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Optional Battery backup sold separately (DC7AH)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
    • .......more details
RJDC7S4N4XR

Liftmaster MAXUM with Nema 4X Jackshaft with Manual Release 1/2HP 480V 1PH/3PH DC Operator 30 Cycles/Hour 700 lbs Right-Hand; 3" Output Shaft ** Currently unavailable

  • Good for Carwash and Barns
  • Corrosion resistant
  • High-efficiency DC motor provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Optional Battery backup sold separately (DC7AH)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
    • .......more details
RL44-40

Direct Burial Loop 6' x 16' Loop with 40' Lead-In

  • Used for installations under concrete asphalt pavers or in gravel roads.
  • The loop can be tied directly to the rebar before concrete is poured.
  • Wire is designed for a direct burial application.
RLC-K36

Miller Edge Light Curtain Non- Monitored 3ft NO/NC

  • Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
  • Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
  • Ideal for pre-2010 installations not requiring a monitored solution.
  • Ability to span up to 32' wide
  • Universal mounting brackets included
  • IP67 waterproof housing
    • .......more details
RN-3-11-6202

Roller 3" UHMW 11" Stem Black

  • 3" UHMW tire
  • 6202 sealed precision bearing
  • 11" zinc plated stem
  • Rating: 200lb load; 100000 cycles of a 12' door
  • Helps quiet the operation of jackshaft operators
RN0024

Roller 2" Nylon 4" stem Black Sold per Roller

  • Black Nylon Roller Wheel Diameter: 2"
  • Working Length: 3.75" Overall Length: 4.75"
  • Box qty: 250 Box weight: 58.2 lbs (2-4 Black Nylon)
  • No bearings in head
RN0024-SS

Roller 2" White Nylon 4-1/2" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 50000 cycles
  • UHMW tire
RN0029-SS

Roller 2" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 50000 cycles
RN0034-SS

Roller 3" White Nylon 4-3/4" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 100000 cycles for a 12' door
  • Overall length is 5-1/2” and the shaft (stem) is 4-3/4” which includes the shoulder.
RN0035-SS

Roller 3" Black Nylon 4" Stainless Steel Stem Precision Sealed Bearing 6203

  • A supreme precision sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 100 lb load 100000 cycles for a 12' door
  • Overall length is 5.17” and the shaft (stem) is 3.90” which does not include the shoulder.
RN0037-SS

Roller 3" Black Nylon 7" Stainless Steel Stem Precision Sealed Bearing 6203

  • A supreme precision sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 100 lb load 100000 cycles of a 12' door
  • Stem Length - 6.69" which does not include the shoulder Overall Length - 7.97"
RN0039-SS

Roller 3" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 100000 cycles of a 12' door
  • Stem Length - 8.312" Overall Length - 9.25"
RN1124

Roller 2" Nylon 4" stem 11 ball White

  • White Nylon Roller Wheel Diameter: 2"
  • Working Length: 3.75" Overall Length: 4.69"
  • Box qty: 150 Box weight: 49 lbs (2-4-11 White Nylon)
RN1124-10

Roller 2" Nylon 4" stem 11 ball White 10/PKG Sold per Pack

  • White Nylon Roller Wheel Diameter: 2"
  • Working Length: 3.75" Overall Length: 4.69"
  • Box qty: 15 packs of 10 Box weight: 49 lbs (2-4-11 White Nylon)