Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
SF375-S

Spring Fitting 3-3/4" Stationary Side Only Long Ear 1" Bore

  • Universal thread for use in either LH or RH wound springs.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
  • Winding bar hole 5/8"
SF375-W

Spring Fitting 3-3/4" Winding Side Only

  • Universal thread for use in either LH or RH wound springs.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
  • Winding bar hole 5/8"
SF514-S

Spring Fitting 5-1/4" Stationary Side Only for 1" & 1-1/4" shaft

  • Can be used with either 1" or 1-1/4" winding cones
  • Includes: (1) stationary side only.
  • 2 x 3/8-16 thread holes at CC=4.25"
SF514U

Spring Fitting 5-1/4" Pair for 1" shaft

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding & (1) stationary.
SF514U-114

Spring Fitting 5-1/4" Pair for 1-1/4" shaft

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding 1-1/4"bore & (1) stationary 1" bore.
SF514U-114-W

Spring Fitting 5-1/4" Winding Side Only for 1-1/4" shaft

  • Universal thread for use in either LH or RH wound springs.
  • Includes: (1) winding side only
SF514U-W

Spring Fitting 5-1/4" Winding Side Only for 1" shaft

  • Universal thread for use in either LH or RH wound springs.
  • Includes: (1) winding side only
SF600S-LEFT

Spring Fitting 6" Pair Stationary + LHW 1" Shaft

  • Cones for 6" ID Left Hand Wound spring wire
  • Not universal thread
SF600S-RIGHT

Spring Fitting 6" Pair Stationary + RHW 1" Shaft

  • Cones for 6" ID Right Hand Wound spring wire
  • Not universal thread
SF600U

Spring Fitting 6" Pair Universal Thread Stationary + Winding for 1" Shaft

  • Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
  • Pair includes: (1) winding & (1) stationary.
  • Not single thread.
  • Winding bar hole 5/8"
SF600U-114

Spring Fitting 6" Pair for 1-1/4" Shaft

  • Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
  • Pair includes: (1) winding & (1) stationary.
  • Not single thread.
  • Winding bar hole 5/8"
SG-13-NC

Telco Light Curtain with Rectifier Normally Closed 72" (13-193-028-D1-E-H59C-5) ***No Longer Available

  • Normally Closed
  • SGR13-193-028-D1-E-HS9-5
  • SGT13-193-028-D1-E-01-15
  • 1928mm housing 1800mm active height 28 channels NC relay output 15m cable
Specification sheetWiring diagram
SG-13-NO

Telco Light Curtain with Rectifier Normally Open 72" (13-193-028-D1-E-H58-5) ***No Longer Available

  • Normally Open
  • SGR13-193-028-D1-E-HS8-5
  • SGT13-193-028-D1-E-01-15
  • 1928mm housing 1800mm active height 28 channels NO relay output 15m cable
Specification sheetWiring diagram
SG-13-NO/NC

Telco Light Curtain with Rectifier w/ Normally Open/Normally Closed Contact 72"

  • 1-10 metre sensing range
  • 16 to 56 parallel scanning beams
  • Active height of 720 mm to 2520 mm
  • Length of 868 to 2668 mm
  • 3 different channel placement models
  • Cable or plug connection
    • .......more details
SG10-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Yellow Housing

  • Red and Green LED traffic light
  • Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
  • 24 volt DC input voltage only
  • Long lasting low power consumption
  • A simple reliable and cost-effective way to reduce accidents around the loading dock.
  • Available in two colors: safety yellow or black.
    • .......more details
Installation InstructionsInstructions d'installationWiring DiagramSchéma de connexion
SG10B-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Black Housing

  • Red and Green LED traffic light
  • Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
  • 24 volt DC input voltage only
  • Long lasting low power consumption
  • A simple reliable and cost-effective way to reduce accidents around the loading dock.
  • Available in two colors: safety yellow or black.
    • .......more details
Installation InstructionsInstructions d'installationWiring DiagramSchéma de connexion
SGO-311-1/2HP

Doorlec Slide Gate Op. 1/2HP 120V w/500w Heater

  • Engineered to accommodate heavy duty hight frequency commercial and industrial sliding gates with cantilever overhead or roller V track application
  • It is enclosed in a heavy steel base with 500 Watt thermostatically controlled heater and lockable cover
  • Three button control O/C/S
  • Adjustable clutch
  • Solenoid brake
  • Universal mount. Left or Right side
    • .......more details
SGP-311-1-115/1

Doorlec Gate Master 1 HP 115V 1 Phase with Heater

  • Post mount heavy-duty industrial slide gate operator
  • Max. gate weight: 2500 lbs
  • Gate travelling speed: 45 ft / minute
  • 175 watt heater with thermostat included
  • Includes Omron reflective photocell
SGP-321-1-230/1

Doorlec Gate Master 1 HP 230V 1 Phase with Heater and Lights in Cabinet

  • Post mount heavy-duty industrial slide gate operator
  • Max. gate weight: 2500 lbs
  • Gate travelling speed: 45 ft / minute
  • 175 watt heater included
SGP-353-1-575/3

Doorlec Gate Master 1 HP 575V/3P with Heater

  • Post mount heavy-duty industrial slide gate operator
  • Max. gate weight: 2500 lbs
  • Gate travelling speed: 45 ft / minute
  • 175 watt heater included