Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
195LM

LiftMaster Ceiling Mount ***Discontinued***

  • Designed to fit most standard garages
  • Black powder-coated finish hides wires and cords for a cleaner look
  • Mounts parallel or perpendicular to rail
  • Adjustable height to fit most ceilings
  • Hangs 6.5 to 24 inches down from ceiling
Installation ManualManuel d'InstallationSell SheetBrochure
SM102

Miller Edge Signature Module w/Junction Box for 10K (T2) Sensing Edges

  • SM-102: Converts a 10K resistive signal
  • Module: 1.8”H x 1.25”W x 0.8”D (46 x 32 x 20 mm)
  • Junction box: 1.5”H x 4”W x 2”D (38 x 102 x 51 mm)
  • Module: ABS plastic with epoxy
  • Junction box: Galvanized steel
  • Module: NEMA 4
    • .......more details
RB-TX20

Miller Edge RBand Wireless Edge Transmitter

EIM-101

Miller Edge Electronic Interface Module w/Junction Box (JB-02P-W)

  • Designed for use with pre-UL325-2010 commercial door operators and Miller Edge CPT sensing edges.
  • It's a durable weather-resistant solution housed in a NEMA 4-rated junction box.
  • This module is particularly suited for overhead doors using retracting reels or coil cords
MT21-2M-BLACK-LH

Miller Edge 2-Wire Monitored Pressure Sensitive Edge Black Left Hand Outlet Sold per Foot

  • Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
MT21-2M-BLACK-RH

Miller Edge 2-Wire Monitored Pressure Sensitive Edge Black Right Hand Outlet Sold per Foot

  • Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
MG123-BLACK-NM-U

Miller Edge Black Non-Monitored Universal Outlet 2 -Wire 2" wide x 1-1/2" high Sold by the Foot

  • The MG123 sensing edge is identical to the ME123 in shape and dimensions
  • The only difference is the rubber compound softer which makes it a bit more sensitive than ME123 (4-7 lbf vs 6-11 lbf).
  • Easy to install
  • Optimum size for 2 inch gate surfaces
  • Double-T design for added stability
  • Mounts vertically or horizontally
    • .......more details
RB-G-K10C

Miller Edge RBand Monitored Wireless Gate Edge System

  • RBand Gate Edge Transmitter/Receiver System
  • The system is intended to provide a wireless connection between a monitored sensing edge and a motorized operator that controls the associated gate
  • The RBand Receiver is compatible with up to 3 RBand Transmitters on 2 channels; 6 total transmitters.
  • RBand meets the 2016 UL 325 requirements for monitored devices and has been certified as a UL 325 Recognized Component.
  • It is designed for use with operators that comply with 2016 UL 325 using a Miller Edge 10K Sensing Edge.
MC271-2MON-RH-GY

Miller Edge MC271 2-Wire Monitored Right Hand Gray Includes End Flaps - Sold per Foot

  • Ideal for Cornell double angle bottom bar
  • Flexible and will conform to floor irregularities
  • Optimum size for 2+ inch thick surfaces
  • Custom manufactured to user specifications for color length and outlet location
  • 5-inch end flaps create a complete seal and can be trimmed for custom fit
  • Sealed assembly impervious to dust and debris
    • .......more details
MC271-2W-RH-GRAY

Miller Edge MC271 2-Wire Non-Monitored Right Hand Gray Includes End Flaps - Sold per Foot

  • Ideal for Cornell double angle bottom bar
  • Flexible and will conform to floor irregularities
  • Optimum size for 2+ inch thick surfaces
  • Custom manufactured to user specifications for color length and outlet location
  • 5-inch end flaps create a complete seal and can be trimmed for custom fit
  • Sealed assembly impervious to dust and debris
    • .......more details