Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
PRO-4X_MOD_5HP

Micanan Nema 4X Modification 5HP

  • This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
  • For options M & U Micanan N-4X photocells are supplied
  • For 5HP motors
PRO-X_MOD-3HP

Micanan Explosion-Proof Modification N-7/N-9 for 3HP

  • Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.
PPLK1-100

LiftMaster Passport Lite 1-Button Mini Remote with Sec+ 2.0 Technology 100/PKG

  • Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
  • These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
  • Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
  • Keychain remote control sold in a 10 pack
    • .......more details
Programming instructionsInstructions de programmationSell sheetBrochure
PRO-HHD-10043U-L

Micanan 1 HP 460V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 1 HP 460 volt 3 phase Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn open/stop/close (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation Manual Specification Sheet
LM2W-B

LiftMaster Photoelectric Smoke Detector 12/24VDC Standard 2-Wire (LMPD24-2W)

  • Plug-in detector line mounting base included
  • Large wire entry port
  • In-line terminals with SEMS screws
  • Mounts to octagonal and single-gang back boxes 4-square back boxes or direct to wall or ceiling
  • Stop-Drop N Lock attachment to base
  • Removable detector cover and chamber
    • .......more details
T2-HBAG

Manaras Trolley Hardware Bag

  • Various fasteners
LA412DCS

LiftMaster Secondary 12VDC Solar Actuator Arm for Dual Swing Gate Applications

Installation manualManuel d'installation
MK-00223

Micanan Transformer 460V-110V-100VA

MK-00100

Micanan Transformer 575V-110V-100VA

MM-00127

Micanan Wall Mounting Adapter Plate (Reducer 63/80)

MK-00477

Micanan Timer Plug-In Type 0-10min 120V

MV-00273

Micanan Key Switch O/C/S Btn Single Gang Stainless Steel Plate Flush Mount

MV-00009

Micanan 3-btn O/C/S Nema-4 Pushbutton Control Station

  • Surface mount
  • Plastic Housing
PRO-J-10011-U-LH

Micanan 1HP 115V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Installation Manual (EN) Specification Sheet
.331-258-R

Cut-to-Length Torsion Spring .331 x 2-5/8" Right Hand Wound Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
2996.3

Truck Door 2" Steel Roller 5" Long Stem Enclosed Bearing for Whiting Roll-Up Doors

  • A Whiting original
ME117-C7

Miller Edge PVC Mounting Channel Sold by the Foot

PRO-GT-5043-U

Micanan 1/2HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-T-7525-U

Micanan 3/4HP 220V 1P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
PRO-T-5011-E

Micanan 1/2HP 115V 1P Trolley Operator NM ECB No Eyes

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Non-Monitored board NO photocells
  • On-Board receiver holds up to 20 transmitters
60-7248-81111

Wheel Chock Safety Pkg incl'd: orange urethane chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) 811-11 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • Not For Use on Ice
  • High Visibility
  • Orange Urethane
  • Size: 11" wide x 8" long x 8" high
60-7248-888

Wheel Chock Safety Pkg incl'd: laminated chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) 88-8 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • Fabric Reinforced Tire Rubber
  • Galvanized Steel Sides
  • Size: 8" wide x 8" long x 8" high
68-9U

Wheel Chock 68-9U Pyramid Rubber with U Handle

  • Handles for chain fastening
  • Long Lasting 80 Durometer rubber
  • Size: 8" wide x 9" long x 6" high
60-7248-689E

Wheel Chock Safety Pkg incl'd: pryamid chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) 68-9E Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • Handles for chain fastening
  • Long Lasting 80 Durometer rubber
  • Size: 8" wide x 9" long x 6" high
HCRH1

Hinge Combination Roller Hinge Assembly #1 Galvanized

MM00284

Micanan Disconnect Arm PRO-HHD MSI0277

D4-120

Extruded Bumper Black 120" L x 4 1/2" W x 3 3/4" H w/Metal Insert

  • Sold in 10' Lengths and cut to measure
  • Includes 10' Metal Washer Insert
  • Comes with 5 Holes for mounting or none - Please Specify When Ordering Bumper
SRB-6

Standard Riser Bracket for 6" Above Dock or Less 6"

  • Standard 6" Riser Bracket for 6" Above Dock Door or Less
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
STRUT-2-1/4-9'-NH

Door Strut 2-1/4" Non Hemmed 9 ft Long *** To Extent of Inventory

  • Reinforcement bar 2-1/4"
  • 20-GA
LB1012-24

Laminated Bumper Standard Black 12" x 24" 10" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB1010-24

Laminated Bumper Standard Black 10" x 24" 10" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-14

Laminated Bumper Standard Black 10" x 14" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
44-60-280

Extension Spring 10' Door - 280 lbs Gold ** By Quote Only

  • Clipped ends
  • 44" long 60" stretch 280 lb load
41A4371

LiftMaster Belt Cap Retainer

  • Same as 41C4371
8-11-1

Strut Clip Sold individually

  • Hole diameter: 0.260"
PRO-X_MOD-2HP

Micanan Explosion-Proof Modification N-7/N-9 for 1.5HP-2HP

  • Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.
PRO-X_MOD-1HP

Micanan Explosion-Proof Modification N-7/N-9 for 1/2HP - 1HP

  • Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.
K1D8387-1CC

LiftMaster Expansion Board UL325

  • Compatible with various LiftMaster® DC Swing and Slide Gate Operators; manufactured after 2016.
  • This board is backwards compatible for older second generation units but will require UL325 Entrapment Protection System and Photoelectric Sensors or Edge Sensors.
MIRF-Z2-50

Miller Edge Patriot 2 Photo Eye Fail Safe 50ft Non-Contact

  • Meets current UL325 standards for commercial door and gate operators*
  • Thru Beam technology minimizes false reflective signals
  • Travels with the door
  • Easy to Align
  • No need to stock special sizes - works up to 30 feet wide or up to 50 ft wide depending on the model
  • Convenient - Assemble and install in the field
    • .......more details
IRB-325

EMX Industries Door and Gate Infrared Thru-Beam Photocells w/ Grey Hoods UL325-2016 EMX-1112-K

  • Type B1 non-contact sensor for use with automatic gates and doors
  • Power: 12V to 24V AC/DC
  • Relay Contacts: 30V 1A
  • Dimensions: 5.03" High x 3.06" Wide x 3.02" Deep
  • Housing: UL and CSA Type 4 4X 3 3R 12 13 Rating
  • Operating Temperature: -40 degrees to 170 degrees
    • .......more details
Installation manualSell sheet
109007

Allstar Slide Switch Only Ivory *** Discontinued

  • ABC selector switch only
44-60-220

Extension Spring 10' Door - 220 lbs *** By Quote Only

  • Clipped ends
  • 44" long 60" stretch 220 lb load
ALUM-569

Aluminum 24" x 100' Spool Saddle Brown / Brun Fauve # 569

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 569
  • Reverse side is #431 Bright White
Colour chart
MP-00002-575V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

  • Controlling action of two lights- sockets supplied on cover
MV-00147

Micanan Control Station 3-Btn O/C/S Nema 4 Surface Mount c/w Key Lock-out & Pilot Light 24V

26CW94525-CUT

Truck Door Intermediate Panel (15" x Cut-to-Size) Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
G1T-BX

Genie 1-btn Dual Frequency Transmitter -38501R

  • Auto Seek Dual Frequency 390/315 MHz
  • For Intellicode products only
  • 1-Button Remote Control with Intellicode.
  • Compatible with all Genie openers produced since 1995.
Programming instructions
37348R

Genie Closed Confirm Remote 915 MHz GLR-BX ** NLA

  • Beeps and flashes green when garage door closes.
  • Gives warning tone and flashes red when garage door does not close properly
  • Compatible with Models 4064 3064 4024 and 3024 only.
  • Works with Genie TriloG™ IntelliG® as well as Revolution Series models PowerMax® SilentMax® and ChainMax™ garage door openers
  • Requires a Genie Network Adapter
  • Sleek and compact design
    • .......more details
Programming instructionsInstructions de programmation
MT21-BLACK-RH

Miller Edge 2-Wire Pressure Sensitive Edge Black Right Hand Outlet Sold per Foot

  • Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
SPECIAL-ORDER

Special Order Item

MK-00172

Micanan Non-Resetable Analogue Counter 24V

  • Monitors door cycles
CF-101-18

Commercial Side & Top Weather-Strip 18' Long Aluminum / Vinyl

  • Same as Garaga CF101
MA116RDOT

LiftMaster White Aluminum Arm with Retro-Reflective DOT Tape 17 ft

  • For use on Mega-Arm gate operator
  • Red White reflective DOT stripe
Additional arm accessories
BEARING012

Manaras Flange Bearing Green for 1' bore ** Repl. by BEARING047

  • 15/32" bolt holes
LB406-14

Laminated Bumper Standard Black 6" x 14" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
XR-1

Linear Single Channel Mid-Range Receiver ** Discontinued

  • 1-channel mid-range receiver
  • Up to 10 miles line-of-sight range (with XT-1 & XT-4)
  • Up to 2 miles of line-of-sight with handheld devices
  • Over 64 000 codes
  • Weather-resistant case
  • RF frequency; 27.255 MHz
    • .......more details
MOD003

Manaras Time Delay Mod. 1.5 Sec 24V for Contactor Models

  • To be ordered in conjunction with a commercial operator
  • Order MODKIT003 for field upgrades
MGH-6536-CONT-R

Manaras 2 HP 600V 3P Jackshaft Contactor Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
Installation manualSell sheet
26CW942255-CUT

Truck Door Bottom Panel with Hardware (15.5" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes with pull strap two bottom roller shaft covers stud plates standard lift handle seal & retainer
    • .......more details
DM54LC-COATED

Cable Drum High Lift 54" 400-54HL Specialty Coated Pair

  • Use for Commercial Highlift Doors
  • Maximum Door Height 120" + Highlift
  • Maximum Highlift 54"
  • Lifting Weight Per Drum 275 lbs.
  • Resists Chemical/Moisture Corrosion
  • Abrasion Resistant
    • .......more details
PRO-H-5011R-LH

Micanan 1/2HP 115V 1P Hoist Operator Contactor Model Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Solenoid brake OPTIONAL
Installation manualSpecification sheet
26140

Doorlec Cam Shaft Threaded 5/8" x 10-3/4"-24

  • This limit shaft will work on all Side-Mount Doorlec Openers
  • Cam shaft 5/8" (1.59 cm) - 24 x 10 3/4" (9.5 cm) fine thread
S142ARNN115

Carlo Gavazzi Amplifier 115V

  • Processor controlled amplifier for one set of photoelectric sensors type MOFTR.
  • 11-pin circular plug for easy connection.
  • 8A SPDT relay output NPN/ PNP transistor output or alarm output.
  • Diagnostics for sensor test during operation.
  • Alignment help via LED or alternation of alarm output.
  • Level indication for dirt accumulation.
    • .......more details
503267

PEEK Vehicle Loop Detector 24V with Harness Nema 1 ** Discontinued

  • Enclosed requires separate 24VAC power.
  • Wiring harness with plug for detector included.
  • OPEN only (all LiftMaster operators) or SAFETY/HOLD OPEN only (operators with type B2 T TS or T1 control wiring) when vehicle passes over loop wire
  • Requires a loop of wire embedded in the ground to connect to the detector.
  • Requires 2-wire output connection to door operator and 24VAC power
  • Also known as: G50625S24
    • .......more details
SG-13-NC

Telco Light Curtain with Rectifier Normally Closed 72" (13-193-028-D1-E-H59C-5) ***No Longer Available

  • Normally Closed
  • SGR13-193-028-D1-E-HS9-5
  • SGT13-193-028-D1-E-01-15
  • 1928mm housing 1800mm active height 28 channels NC relay output 15m cable
Specification sheetWiring diagram
MK00713

Micanan 10K OHM 1/4W Resistor

  • Replaces MK-00694
SD751L5-RH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 115V Right Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
Installation manualManuel d'installationSell sheetBrochure
MK-00012

Micanan Reversing Relay 24VAC Coil DPDT Flange Mount

BL-BAG-12

Barlock Hardware Bag Only for Doors 13ft and Over

  • Does NOT include the locking bars
Assembly Manual
9723-48

Whiting Pull Strap 48" with Steel Retainer

  • 48" long
28018A-KIT

Genie Inner Slide Bullet and Retainer Kit Belt Drive

  • Kit includes part # 28018A and # 28019A
  • Fits Many Genie and Overhead Door Belt Drive Openers with C Rail
  • Includes 1 Belt Bullet and 2 Retainers
G651209P

LiftMaster 10ft PVC Arm Square Yellow/Black Stripes **DISCONTINUED

  • Requires clamp model # G108019 sold separately
  • For use on barrier gate operator BG770
PPLV1-100

LiftMaster Passport Lite 1-Button Visor Remote with Sec+ 2.0 Technology 100/PKG

  • Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
  • These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
  • Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
  • Sold in a 100 pack
    • .......more details
Programming InstructionsInstructions de programmationSell sheetBrochure
K10-30699-1

LiftMaster Chain Cover Mounting Bracket with Cover

M-18

Molded Rubber Bumper Black 18" L x 10" W 4" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • 4-1/2" depth
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles. and will not warp rust rot or harden.
    • .......more details
27-24200

Truck Door Single Torsion Spring Assembly 96/60 for Todco Roll-Up Doors

  • Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
  • Shaft Length: 96" Spring Length: 60" Wire Size: .243
  • Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
  • Springs treated with rust preventative
  • Heavy .243 dia. spring wire
  • Heavy-duty cast aluminum cable drums hold up to 130" of cable
    • .......more details
K001A5859

LiftMaster Elite Dual Motor Circuit Board Q171 ** NLA

  • Old style fits SL3000 CSW 200 with Q019 boards only
  • This board has been discontinued and no replacement available
BL-09

Barlock Kit Complete for 9ft Wide Door Kit includes hardware bag

  • Kit includes hardware bag and bars (55-1/2")
Assembly Manual
BL-12

Barlock Kit Complete for 12ft Wide Door Kit includes hardware bag

  • Kit includes hardware bag and bars (73-1/2")
Assembly Manual
PRO-LH-5011R-LH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft with Contactor Left Hand (PRO LHR)

  • Designed for use on commercial sectional doors with high or vertical lift
  • May also be used on small rolling grilles with max. 15 cycles per hour
  • Includes chain hoist
  • Includes solenoid brake
  • No longer available in contactor model (2017)
Installation manualSpecification sheet
24-230-5

Relay 3 PDT 230V 7A

  • 208/230VAC relay
  • Used in BG770 gate operators
PPLV1-10

LiftMaster Passport Lite 1-Button Visor Remote with Sec+ 2.0 Technology 10/PKG

  • Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
  • These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
  • Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
  • Sold in a 10 pack
    • .......more details
Programming instructionsInstructions de programmationSell sheetBrochure
750

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 3/4" (#3PT) 1000/Box ** Indef. delivery

  • Indented Hex Washer Head
  • 7/16" Head
  • Max RPM = 2000
  • #3 point = long cutting edge (less thread)
PBTL3-RED

Replacement Button Only - N/C Stop Red

  • Stop switch and rubber cover for PBTL-3
3-26-1

Half Hinge Type S Service Type Door ** Available to Extent of Inventory

  • Half hinge type "S"
  • 16-gauge
2594

Whiting Bearing Retainer

S142BRNN924

Carlo Gavazzi Amplifier 24V

  • Processor controlled amplifier for one set of photoelectric sensors type MOFTR.
  • 11-pin circular plug for easy connection.
  • 8A SPDT relay output NPN/ PNP transistor output or alarm output.
  • Diagnostics for sensor test during operation.
  • Alignment help via LED or alternation of alarm output.
  • Level indication for dirt accumulation.
    • .......more details
25-01434

Truck Door Stainless Cables 110" 1/4 nylon eye 7x19 Pair for Roll-Up Doors

  • Works with both Whiting and Todco doors
  • Nylon eye ends are used 1/4" and 7/16" eye cables
  • Cross Ref: W4020-1
1005-1-1/2-10'

Aluminum Bottom Retainer U-Shaped 10' Long

  • For door thickness 1-1/2"
MHN-SET-100

Magnetic House Number Set 5" Black Embossed 100 pcs

  • Flexible magnetic material with an embossed finish
  • 100 piece contains ten each of numbers 0-9
  • Priced per box
26966A

Genie Idler Pulley for Stealth Chain Drive

  • Fits Genie Stealth model
  • 1/4” bore
  • Channel style rails
RDGRNCARD

LiftMaster Warning Device Option Board with Red/Green Light Box

  • The Red/Green warning light card flashes a warning light for 10 seconds prior to the Timer to Close activating the door to close.
  • Advanced warning of the door closing helps prevent traffic collisions with the door
  • Controls both 24V & 110V traffic lights
Installation Manual
RESET007

Manaras Resettable Overload Fuse 10A 1 Phase

041000

Surge Protector1080 Joules UL Listed (041008)

  • Woods surge protector
  • Full 3 line protection
  • Electrical rating – 15 A 120 VAC 1800 W
  • Voltage protection – L-N: 400V L-G: 500V N-G: 400V
  • 900-1500 Joules surge protection
  • Max Surge protection – 6000 V
    • .......more details
157371

Decorative Pull Handle Yorktown Style 11-1/4" Stamped Steel Sold per piece

  • Black Stamped Steel
  • Also known as Spade Style
  • Mounting hardware sold separately
  • Priced per each
SNRRLIGHTJHL

LiftMaster Light Bulbs for MiniKey 10/pkg

  • Light bulbs for recessed keypad
  • Same as SN1650029
68-9E

Wheel Chock 68-9E Pyramid Rubber with Eye Hook

  • Handles for chain fastening
  • Long Lasting 80 Durometer rubber
  • Size: 8" wide x 9" long x 6" high
T012

Manaras Trolley Track 12ft for 1/2HP models *Actual length 174"*

  • For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)
OVERLOAD019

Manaras Telemecanique Overload Base

111883.0001

Overhead Logic Board for RMX

  • Replacement circuit board kit for the Overhead Door RMX commercial operator.
  • Replacement circuit board for the Overhead Door RMX commercial operator. UL 325 2010 compliant.
  • This circuit board replaces part #110955.0001