Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
PRO-J-7581-U-RH

Micanan 3/4HP 208V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
PRO-J-5011-U-LH

Micanan 1/2HP 115V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
PRO-GT-10053-U

Micanan 1HP 575V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-10023-U

Micanan 1HP 230V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-10021-U

Micanan 1HP 230V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-5083-U

Micanan 1/2HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

  • On-Board receiver holds up to 20 transmitters
SPRAY-265

Aluminum Touch Up Spray Paint Antique Brown / Brun Antique #265/165 *** To Extent of Inventory

  • 140g
ALUM-507

Aluminum 24" x 100' Spool Tan / Tan # 507

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 507
  • Reverse side is #431 Bright White
Colour chart
ALUM-568

Aluminum 24" x 100' Spool Nutmeg / Brun Muscade # 568

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 565
  • Reverse side is #431 Bright White
Colour chart
25-60407

Truck Door Rear Frame Conversion Bulk Kit with 7" Header 2" Wide

  • Converts swing doors to roll-up doors by removing the old swing doors and weld conversion corner post and header in its place
  • Vehicle is now ready for roll-up door installation
  • Corner post has added lip length to allow easier weld during installation
  • Steel construction .125 thick
  • Each bulk kit includes two (2) corner posts and one (1) header
  • Plain finish
    • .......more details
.273-258-R

Cut-to-Length Torsion Spring .273 x 2-5/8" Right Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
PRO-APTB-7583-U

Micanan 3/4HP 208V 3P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

  • Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
  • Low clearance design for apartment applications (9.5")
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema-1
  • Solenoid brake installed
  • Door speed 12" per second
    • .......more details
.375-514-R

Cut-to-Length Torsion Spring .375 x 5 1/4" Right Hand Wound Yellow/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
PRO-APT-7511-U

Micanan 3/4HP 115V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
PRO-APT-5081-U

Micanan 1/2HP 208V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-TB-7581-U

Micanan 3/4HP 208V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
PRO-TB-5021-U

Micanan 1/2HP 230V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
2806.206.325

Whiting .206 x 2-3/16 x 32-1/2" Roadside with Cones

88-8XL

Wheel Chock 88-8XL Laminated Rubber Galv. Steel Sides

  • Made From Used Truck Tire Laminates Compressed and Fastened Under High Pressure
  • Galvanized Steel Sides
  • Size: 11-1/4" wide x 14" long x 14" high
WC-5810

Wheel Chock WC-5810 Pyramid Rubber with U Hook

  • Solid Rubber Construction
  • Hook for chain fastening
  • Long Lasting 80 Durometer rubber
  • Size: 8" wide x 10" long x 5" high
60-7248-CMH94

Wheel Chock Safety Pkg incl'd: chock with integral handle wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) CMH-94 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • One Piece Solid Rubber
  • Integral Handle
  • Long Lasting 80 Durometer rubber
  • Size: 7-1/4" wide x 9-3/4" long x 7-3/4" high
27122

Doorlec Electric Motor 1/3HP 208/480/575V 3PH DC321

STRUT-2-1/4-10'

Door Strut 2-1/4" Hemmed 10 ft Long

  • Reinforcement bar 2-1/4"
  • Electro-Galvanized
  • 22-GA
RBH503L5-RH

LiftMaster 1/2 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Right Hand

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
MX00164

Micanan VFD Transformer Panel Mod. 575V pri / 230V sec (MX00216)

  • The primary power is connected to the transformer panel and 230V from the transformer panel gets connected to OMC VFD operator
DM120-125-T/FORCE

Cable Drum High Lift 120" D575-120-1-1/4" Pair Torque Force

  • 120" High Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
  • Maximum high lift: 120".
  • Maximum door height: 144" + High Lift.
  • Rated lift per drum: 500 lbs.
    • .......more details
CAPCELL

LiftMaster Cellular 4G/LTE Modem with Wifi

  • Connect CAPXL and CAP2D Anywhere: compatible with SIM cards from most carriers.
  • Sign up with your preferred carrier or add on to your current plan.
  • Avoid trenching and wire pulling for speedy installations.
  • Eliminate plain old telephone service (POTS) and improve reliability.
  • Compatibility: At&t® Verizon® T-mobile® Bell® Rogers™ Telus®
  • Capacity: Connect up to 4 wired or multiple Wi-Fi devices
    • .......more details
CP-IDLER-ASSY-MR

Lynx Front Idler Assembly Chain TC3

SPUR_GEAR

Spur Gear For Holdown Assembly

31D380

LiftMaster Sprocket Cover

  • Sprocket Cover Replacement Kit for use with various LiftMaster® and Chamberlain® Chain Drive Garage Door Openers
HRB-12

High Riser Bracket for 7" Above Dock or Higher 12"

  • High Riser 12" Riser Bracket for 7" Above Dock Door or Higher
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
HRB-10

High Riser Bracket for 7" Above Dock or Higher 10"

  • High Riser 10" Riser Bracket for 7" Above Dock Door or Higher
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
MK01065

Micanan Light Duty Resistor 2 OHM 25W c/w Wire Leads

17-2001

LiftMaster Pulley 8" x 5/8" 4L Belt (K17-2001)

  • Same as K172001
B

Molded Rubber Bumper Black 24" L x 12" W 3" Projection 4-Hole 2 Reflectors Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
  • Bumper comes with 6 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
DBE-10

Molded Rubber Bumper Black 10" L x 4 1/2" W 3" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
  • Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
  • 10" L x 4 1/2" W 3" Projection
    • .......more details
LVB1024-11

Laminated Bumper Black 10" Projection Vertical Installation 24" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB1210-14

Laminated Bumper Standard Black 10" x 14" 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB924-11

Laminated Bumper Black 9" Projection Vertical Installation 24" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
8065

LiftMaster Contractor Series 1/2 HP AC Chain Drive Garage Door Opener **DISCONTINUED

  • MyQ® Technology enables you to securely monitor and control your garage door opener and houselights with your smartphone tablet or computer.
  • 1/2 HP AC motor with industrial-strength chain drive provides steady performance and lifting power.
  • Security+ 2.0™ safeguards your household – with every click a new code is sent to the garage door opener so that the door opens only for you.
  • The Protector System® has safety sensors that project a light beam across the garage door opening automatically reversing the door if anything interrupts the beam.
  • Comes with: 1-Button Remote Control (891LM) Door Control Button (883LM)
2376.182.29.870

Whiting Torsion assembly .182 wire size 29" spring length 87" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
WRW

Erone Wiegand Wireless Receiver 433MHz

  • 433 MHz radio frequency systems offer longer range (up to 250m (820ft) less interference jamming and excellent reliability.
  • KeeLoq® Rolling Code technology ensure ultra-secure transactions.
  • Output: Wiegand 26 bit
  • Power requirements: 12 or 24V (AC or DC)
  • Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)
  • Compatible with Centaur and any 26 bit Wiegand-capable systems
    • .......more details
Wireless System Chart
CB380250

Cable 3/8" 6x36 IWRC 250' Galvanized Wire Rope

  • This rope is most commonly used on small overhead cranes and pulley systems.
  • Provides strength and flexibility but not a lot of wear resistance.
  • Cable break strength: 13600 lbs
PO17

Overhead Door Bottom Astrigal Rubber for Rolling Steel Doors Sold by the Foot

K32-8002

LiftMaster Gear Reducer for BG790 Barrier gate operator

  • Also known as: 32-8000 G328001 32-8001 328002 328001 32-8002 G328002
MG00018

Micanan Lock Washer 3/8"

  • PRO-GHC operator parts
  • 10 required per operator
90-PGR

LiftMaster Parking Gate Radio Mod. Kit

  • G90PGR includes the limit switch wiring and bracket.
  • Used on PG HBG and BG models.
41A4208-2

LiftMaster Chain Spreader Kit

  • Chain Spreader Replacement Kit.
  • For use with various LiftMaster® and Chamberlain® Chain drive garage door opener models.
  • Complete kit includes: Chain spreader replacement screws and washers.
  • Also known as: 41A4208 41A4208-2 062210
K74-18346

LiftMaster Limit Shaft Kit

  • Compatible with LiftMaster® Model GH 5HP Commercial Door Operators
MH00003

Micanan Oilite Flange Bushing 3/4 ID x 7/8" OD Sold Individually

  • 2 required per machine
.331-6-L

Cut-to-Length Torsion Spring .331 x 6" Left Hand Wound Red/White

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • For spring filler use part no. SPRING-FILLER
LIMIT023

Manaras Single Limit Switch with 46 degree Lever

  • Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
  • Unimax
  • Snap-action.
50615

Splash Proof Cover EHJ / HDC

Drawing
2807.139*170

Whiting .139 x 2-3/16 x 17" L Curbside with Cones

  • For Roadside order part # 2806.139.170
2650-112-11

Linear Cold Weather Package HSLG 230V

  • Factory Option 2650-112-11 Cold Weather Package for 230-volt HSLG
  • Package includes: Arctic Oil Heater Cogged Belt
  • This factory option is only available for purchase when buying your gate operator.
37561S.S

Genie Belt and Bullet Assembly 8ft

  • For use on 8 ft doors
  • Compatible with the following:
  • SilentMax 1200 (Model 4042) 1000 (Model 3042) 750 (Model 3055) 550 (Model 2055)
  • ReliaG 650 (Model 1028) 850 (Model 2028)
  • IntelliG 1000 (Model 3024)
8280.96

Whiting Aluminum U-Channel 96-5/8 IN Dry Freight

  • An original Whiting product
  • Use with Whiting seal # 5735.96
DM18VL-T/FORCE

Cable Drum Vertical Lift 18' D1100-216-1 Pair Torque Force

  • 18' Vertical Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x2" hardened cup point set screws installed with red heads.
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
  • Max. Door Height: 18'-1".
  • Rated Lift per Drum: 660 lbs.
  • Max. Cable Diameter: 3/16".
    • .......more details
E/BLOP/122

Automatic Systems Red Arm Light - 2 Sets

  • Increases visibility of the arm on BL229 gate operator
4007-7FT

Aluminum Retainer only for Light Brush 90 degree

  • For angle application
  • For use with Light Brush or Vinyl Insert.
MX00034-575V

Micanan Brake Assembly for PRO-HHD with 575V Solenoid (MX00206-575)

  • Complete brake assembly including 575V solenoid - solenoid cover sold separately part #MM00011
5001-9-WHITE

Residential Side & Top Weather-Strip 9' Long - White

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
1005-1-3/8-14

Aluminum Bottom Retainer U-Shaped 14' Long

  • For door thickness 1-3/8"
MB-15204

Micanan Electric Motor Only 2 HP 575V 3PH C-Flange TEFC 145TC

  • Fits GT GH GHC & GSD
AQ201-NB

Linear GTO Narrow Band Receiver w/Antenna and 10ft Cable

  • Works with all GTO DC gate operators and narrow band transmitters (gray style).
  • The AQ201-NB comes standard with all DC slide gate operators.
  • Measures: 2"H x 2-3/8"W x 15/16"D
WEL-200-T

EMX Wireless Edge Link Transmitter Unit only

  • Addition transmitter unit for multiple setup
Manual
K1D8284-1CC

LiftMaster Main Drive Board 1 Ph (SL585U SL595U)

PRO-HBH10021U-R

Micanan 1 HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

  • 1 HP230V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
KPR2000

LiftMaster Wired Keypad and Proximity Reader

  • The KPR2000 supports a maximum of 2000 users in multiple access configurations (card only 4 to 6 digit PIN only or a combination of card and PIN).
  • Supports HID 26 and 30-bit Wiegand proximity card formats.
  • Designed for outdoor environments with a sealed weather proof design allowing you to easily mount anywhere.
  • Functions as a Stand-Alone Controller or in Pass-Through Mode (Wiegand Keypad Wiegand Proximity Credentials ASCII Keypad).
  • Latch Mode allows you to hold open a door or gate for an extended period of time.
  • Rapid Programming and Block Enrollment capability “Add” and “Delete” program cards included.
    • .......more details
Installation instructionsManuel d'installationSell sheetBrochureWiring instructionsInstructions de cablage
LVB424-11

Laminated Bumper Black 4" Projection Vertical Installation 24" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
26CW94222-CUT

Truck Door Bottom Panel with Hardware (12" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes with pull strap two bottom roller shaft covers stud plates standard lift handle seal & retainer
    • .......more details
CF-101-24

Commercial Side & Top Weather-Strip 24' Long Aluminum / Vinyl

  • Same as Garaga CF101
SL-300T

Skylink 1-Btn Visor Mount Transmitter 300MHz ***No Longer Available

  • Easy to carry or clip on sun visor.
  • Works in conjunction with Skylink Universal Receiver: Model SL-300R.
  • Operating range of 100 feet and more.
  • 12V alkaline battery included.
PRO-GH-10053U-R

Micanan 1 HP 575V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
19051

Doorlec VBelt 5L370

  • works on model ETBX
10FT-CHAIN-LINEAR

Linear 10ft Chain T- Rail for residential openers (HCT10C)

  • 10ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
MB-03004

Micanan Electric Motor Only 1 HP 110/220V 1PH C-Flange TEFC 56C

  • C-Flange TEFC electric motor
  • Fits models: GT GH GHC & GSD
ME00002

Micanan Clutch (Input) Shaft Only for Pro-H/HB

  • 3/4" x 16-3/8"
TRACK-GUARD48-NP

Track Guard 48" Tall Safety Yellow Sold as a Pair No Floor Plate

  • Provides impact protection to vertical track
  • 45° angle flange adds strength protects from side impact.
  • 7-gauge steel construction powder coated safety yellow for high visibility.
  • Wall flange drilled with slotted holes for four 3/8” anchors
  • Includes: 60-5106 (right) and 60-50105 (left) sides
PRO-GH-5011U-R

Micanan 1/2HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
36051R

Genie Replacement Carrage Assembly

  • For Genie belt drive garage door opener model 2040L
M10A

Safety Inertia Brake 1-1/2" Bore 8851 Torque

  • Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
  • Ideal for commercial and industrial use; specifically with rolling shutters and rolling doors.
  • Normal Torque: 8851 lbf.in
  • Locking Torque: 31509 lbf.in
Reference manualTechnical dataSell sheet
41A3588-1

LiftMaster Belt Idler Pulley and Bracket (Built Years Pre-2000)

  • This is a Belt Pulley Bracket Replacement Kit. For use with various LiftMaster® and Chamberlain® Belt Drive Garage Door Openers.
  • Works on models 1270. 1280 & 1280R
PRO-HBH-7583U-R

Micanan 3/4HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 3/4 HP208V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
7-6095

RW Hanger 323 For use with #31 track

  • Wheels: 2-1/8" diameter Formed Steel
  • Apron: Formed steel vertically adjustable 5-3/4" long x 3-1/2" wide
  • Pendant: 1/2" diameter Steel
  • Door thickness: 1-3/4" inches to 2-1/2" inches
  • Included: 1 carriage bolt 2 flat head stove bolts
  • Capacity: 1 pair for a maximum of 400 lbs
    • .......more details
MH00109

Micanan Flanged Snap Ring 3/4" ID Precision Bearing

MK00707

Micanan Varistor Harness 110V with Black Wires

CH100

Contact Cleaner and Lubricant 325g ***NLA

  • Cleans both electrical and electronic parts.
  • Cleans dries and leaves a thin protective film.
  • 340g / 11.5 oz spray can
  • 12 cans per case
Safety data sheetFiche de données de sécurité
MK-00063

Micanan Honeywell Limit Switch

WHITING-PANEL

Whiting Special Order Replacement Panel Only Price by Quote Only

  • Special order to customer's specs
MD00420

Micanan Flex Coupling Lovejoy 3J x 3/8"

PRO-H-5011E-LH

Micanan 1/2HP 115V 1P Hoist Operator NM ECB No Eyes Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Solenoid brake OPTIONAL
  • Non-monitored board NO photoeyes
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
MD00020

Micanan Sprocket 50B40 x 1-1/4" bore has 1/4" and 3/8" keyway with set screw

503267

PEEK Vehicle Loop Detector 24V with Harness Nema 1 ** Discontinued

  • Enclosed requires separate 24VAC power.
  • Wiring harness with plug for detector included.
  • OPEN only (all LiftMaster operators) or SAFETY/HOLD OPEN only (operators with type B2 T TS or T1 control wiring) when vehicle passes over loop wire
  • Requires a loop of wire embedded in the ground to connect to the detector.
  • Requires 2-wire output connection to door operator and 24VAC power
  • Also known as: G50625S24
    • .......more details
34201

Doorlec V-belt Pulley MA20 2" x 5/8" bore

P220-2K

Heddolf 2-btn Transmitter 8-Dip Switch 318 MHz

  • Allstar compatible remote
CP-SP-DISCONNEC

Lynx Hoist Spring MCJH CP-SP-DISCONNECT

19054

Doorlec VBelt 5L380

  • works on model SWGO
PRO-TB-5011-U

Micanan 1/2HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
CT751L5

LiftMaster 3/4HP 115/230 Volt 1Ph Com. Trolley Operator with Carwash Mod

  • New Logic 5
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • MyQ Mobile App is a free download with no annual activation fee.
    • .......more details
Installation manualManuel d'installationSell sheetBrochure