Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
CABLE-NR-14-CC

Cable No Roll 1/4" 19x7 Non-Galvanized C-Coated 500ft

  • 19X7 rotation-resistant wire rope.
10-10875

LiftMaster Disconnect Lever H MH J **to extent of inventory

DXT-21

Linear 2-Btn 1-Channel Handheld Transmitter 315 MHz *** No Longer Available

  • A battery powered portable transmitter designed for use with Linear’s DX Format receivers.
  • Each transmitter can be used in a limitless number of wireless remote control applications.
  • Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver
  • The digital DX code format features over a million possible codes.
  • The DX transmitters are precoded at the factory to unique codes so no field coding is required
  • Powered by two 3-Volt #2032 lithium batteries included
    • .......more details
Installation Manual
RESET012

Manaras Resettable Overload Fuse 15A 1 Phase

D6375-164

Cable Drum High Lift 164" 1" Bore Torque Force Pair

  • Maximum hi-lift: 164"
  • Capacity: 800 lbs per drum
  • Cable length: Floor to shaft center 181" minus amount of Hi-Lift
  • Cross reference: DNS 410-164 OMI 164HL M162-4165
D6375-164-125

Cable Drum High Lift 164" 1-1/4" Bore Torque Force Pair

  • Maximum hi-lift: 164"
  • Capacity: 800 lbs per drum
  • Cable length: Floor to shaft center 181" minus amount of Hi-Lift
  • Cross reference: DNS 410-164 OMI 164HL M162-4165
BG790-50-11-HTC

LiftMaster Ind-Duty Wishbone Barrier Gate Op 1/2 HP 115V w/Arm Weight & Heater and TTC

  • A reliable gear-driven barrier gate operator that is perfect for industrial applications.
  • This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
  • The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
  • Standard Features: Control inputs and Adjustable limit settings
  • 02-102 Open/Close Push Button Included
Installation ManualSell Sheet
1007-1-5/8-14

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

  • For door thickness of 1-5/8" to 1-3/4"
2'6X6SC50

Devanco Loop 2'6" x 6' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
26-40410

Truck Door T-Style Standard Side Seal 116"

  • Extruded from long lasting rubber
  • Seal protects cargo area from dirt and moisture
  • Used with standard J channel vertical angle with 1" track
  • Length: 116"
  • Cross reference: T #69840 W #4019 620200
CB5320500-KOR

Cable 5/32" 7x19 500' Galvanized Supreme

  • Galvanized cable 5/32" 7x19 500ft spool.
  • Cable break strength: 2800 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
UNI-100-142

Uni-Size Bottom Weather Seal 14'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
UNI-100-102

Uni-Size Bottom Weather Seal 10'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
K20-1050B-2LP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph L3 L4 ***NLA*** replaced by: K20-1050B-2LP-H24

  • Standard 1/2 hp motor
18-MAG-STRAP

Magnetic Hinge Strap 18" Black Set of 4

  • Decorative hinge strap only.
  • Black flexible magnetic material with deep embossed design
T112

Manaras Trolley Track 12ft for 3/4HP & All APT models *Actual length 174"*

  • For models MGT/OTH/OTBH 3/4 hp only with Chain #41
HSC-1000

Hand Swager 1/4" & 5/16"

  • Swages 1/4" and 5/16"
  • Made in Japan
84284

Marantec Logic Board for Non-EOS Models

  • For use on M Line- M-4500 and M-4700 models.
  • For use on Q Line - 7500 and 7700 models.
  • For use on Martin DC 3500E and DC 3700E models.
  • Replaces 8054216. Special programming needed. Instructions included
10-1000-14FT

Strip Curtain 14' x 48" Angle Mount - 8" LT PVC - 4" O.L Clear

  • 14 ft wide x 48" high
  • Mounting bar sold separately
4011-12FT

Aluminum Retainer only for Light Brush or Vinyl Insert 12' Long 90 degree

  • For angle application
  • For use with Light Brush or Vinyl Insert.
  • For applications that require dual brush or brush and vinyl
MT-UHF-0-0

AWID Long Range Metal Mount Tag

  • For use with LR-2000 and LR-3000 readers
  • Operating temperatures from -58°F to 185°F (-50°C to +85°C)
  • Reading Distance up to 25 feet
  • Battery not needed passive tag
  • Passive RFID technology with excellent-price-to-performance ratio
  • Proprietary encryption for protection of card data
    • .......more details
MB-02102

Micanan Electric Motor Only 3/4HP 230/460V 3PH

  • Base mount motor fits: T TB APT J EJ H EHJ HHD SD
9382054125

Square Torsion Spring .343 x 5-1/4 x 41.25" with Cones RHW

  • 41.25" long = 160 coils
156871

Decorative Hinge Yorktown Style 16" Stamped Steel sold per piece

  • 16" hinge strap only
  • Black stamped steel
  • Mounting hardware sold separately
  • Sold per piece
27-48-300

Extension Spring 8' Door - 300 lbs Tan

  • Single - Loop
  • 27" long 48" stretch 300 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-130

Extension Spring 8' Door - 130 lbs Yellow

  • Single - Loop
  • 27" long 48" stretch 130 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
H12G07-SS

Hinge #7 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
K94-36408-1

LiftMaster Reset Switch LA500 with ID Resistor

  • For use with LiftMaster LA500 Series swing gate operators
  • Includes ID resistor kit
  • Includes LA500 product ID
41ASWG-0119

LiftMaster Release Keys for LA400 & LA500 Qty: 2

K1D8052-1CC

LiftMaster Control Board for LA500DC LA400 LA412

  • 014D1270D
15-3619

LiftMaster Sprocket 50B19T 1-1/4" x 1/4" 2-SS

ME120-BLK-E-4FT

Miller Edge 2-Wire Black End Outlet 4 ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualSell Sheet
1224-1-3/4"-BLK

Elton Commercial Window for Flush Doors 1-3/4" thick 1224 Black Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 25-1/8" x 13-1/8"
  • Cut-out size: 24-1/16" x 12"
  • Vision area: 21-11/16" x 9-5/8"
  • Different glass options and frame colours are available upon request
    • .......more details
21-10340

Transformer 115-24V AC 20VA

  • 120V Primary 24V Secondary 20VA
PRO-LH-5011U-LH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • Designed for use on commercial sectional doors with high or vertical lift
  • May also be used on small rolling grilles with max. 15 cycles per hour
  • Includes chain hoist
  • Includes solenoid brake
  • On board 372 MHz receiver with antenna
  • On-Board receiver holds up to 20 transmitters
    • .......more details
Installation manualSpecification sheet
H031

Rolling Steel Slide Bolts and Holder Fire Door

285547

Rolling Steel Aluminum Transition Piece Sold per Foot

14-J

Rolling Steel 3" Flat Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
17JW

Rolling Steel 2" Flat Cast Windlock

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
2528.110

Whiting Dual-Spring Shaft 110" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • No pre-drilled holes
  • Cross Reference: For Whiting # 2376 balancer
OEB-1

Super Sneaky Operator Extension Bracket

  • Improves installation safety
  • Extends operator rail travel length. Use a 7′ rail for 7’6" – 8′ tall doors
  • Saves extra 2" of headroom required by draw bar type operators
  • Pulls door clear of opening
  • Eliminates garage door overhang
  • Greatly increased installation ease & safety
    • .......more details
SLT17-20P

Rolling Steel 2" Flat Slat 20-ga Primed

340.115

Whiting Top Panel Tongue & Groove 11-1/2" x 96"

  • Primer only
  • Standard size panel
6X10PO50-RIGID

Devanco Loop 6' x 10' Rigid PVC pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
GH503-L5

LiftMaster Gearhead with Brake 1/2HP 208/230/460V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
M-VERSION

Manaras Monitored Entrapment Protection Option Upgrade Mont Thru-Beam + N1 Eyes

  • Upgrades added when purchasing a commercial operator
PROBE-100

EMX CARSENSE-101 Direct Burial Probe with 100' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
9723S19

Whiting Pull Strap 19" with Stainless Steel Buckle

Q029

LiftMaster Limit Switch for Elite Gate Operators (K23-50099)

  • Sold individually
  • For Elite Miracle-One arm SL3000 CSW200 and robo slide and robo swing gate operators.
  • Same as part no. K23-50099
.331-334-L

Cut-to-Length Torsion Spring .331 x 3-3/4" Left Hand Wound Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
IRB-BR

EMX Industries Brackets for Photoeyes Sold as a Pair *** To Extent of Inventory

  • Brackets are predrilled
  • Used for PC-3 P41 P44 P45 and IRB-4X photoeyes
  • Made of metal
  • Sold as a pair
  • 9" x 3" L-Shaped
MQ00012

Micanan Adjustable Cable Stopper Gold C/W Set Screw Sold per piece

  • Used on all Micanan waterproof and corrosion proof units that have brakes as well as all explosion proof units.
  • Comes with set screw 3/16†x ¼â€
BSG12-24LED

Devanco Stop and Go Light Black Housing 12-24V LED

  • LED Traffic Light Red/Green Dock Light
  • Weather-proof 2 piece housing with highest available UV rating
  • Wide input voltage range of 10-32V AC/DC eliminates the need to stock 12V and 24V models.
  • Ultra bright LED's for easy viewing in direct sunlight
  • Lenses measure nearly 4" in diameter
  • Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied
    • .......more details
Installation InstructionsInstructions d'installationSell Sheet
71-B575-1

LiftMaster Internal Brake Kit 575V 3PH for L5 Operators

  • Complete with: Brake hub kit Brake release lever Brake disc Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Conduit
  • Can be replaced in-field
Instruction ManualManuel d'instructions
86-RP08-102

LiftMaster Roll Pin Short 1/4"x 1-1/2 Coiled 10/Pkg (K-SPSHORT)

  • Same as K-SPSHORT
SPREADER003

Chain Tensioner for 1-1/4" / 1-1/4"

  • Chain spreader for installation with 1-1/4" operator shaft and 1-1/4" door shaft
  • Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing
Installation instructions
MOD050

Manaras Friction Clutch Mod. #50 Chain Gear Head Operators

  • Installed directly on the output shaft of the operator.
  • Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
  • Includes sprocket for #50 chain
  • Operator mounting side must be specified
  • A spreader bar cannot be used in conjunction with this modification
  • This modification applies to OGH and MGH operators
    • .......more details
CARRIAGE006

Manaras Trolley Carriage Aluminum Die Cast

CLUTCHPAD007

Manaras Clutch Pad 1-3/4" ID 5" OD

PULLEY020

Manaras Clutch Pulley 7" x 5/8"

  • Included in MOUNTSHAFT001 001A 007 011 and 014
27175B

Genie Carriage Slide Only

  • Carriage NOT included. Carriage part number 20462R
  • Compatible with Genie GPS and PMX belt drive models
375UT

LiftMaster Universal 2-btn Transmitter Next Generation

  • Dual frequency universal transmitter
  • Will activate 2 different types of openers (1 on each button)
  • Compatible with major brands except Marantec & Hormann
  • Visor clip and battery CR2032 included
Programming InstructionsInstructions de programmationSell Sheet
LA500DC

LiftMaster Primary 24VDC Actuator Arm for Single Gate Applications New Model

  • Replacement actuator arm for single gate applications
Installation ManualManuel d'installationSell SheetBrochure
733

Fasteners Flat Washer 5/16" Zinc 1000/Box

LEVER065

Manaras Brake Lever

MD00327

Micanan Sprocket 50B15 x 1" 1/4" KW 2SS

7001-7-BLACK

Commercial Side & Top Weather-Strip 7' Long - Black 7001-BB (Code B)

  • Black galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
788

Fasteners Hex Nut 5/16-18 1000/Box

19-5814

LiftMaster Trolley Chain Pack #48 for 14ft Door

  • Chain pack only
K2A761

LiftMaster Coaxial Cable

  • For use with 315MHz receiver
1116633901.S

Overhead 1-btn Transmitter 390 MHz

  • Replaces the 1091303901.S
  • 1 channel transmitter opens and closes 1 door
  • Codes using 9 dip switches with 3 positions
  • Battery (ALK12V) and visor clip included
  • Compatible with all Overhead Door 390 MHz frequency garage door openers that were manufactured before 1996.
  • This was a common remote on the 556C
    • .......more details
Programming InstructionsInstructions de programmation
H501L5-LH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 115/230 VAC Logic 5 Left Hand *** No Longer Available

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
V1001-B

Elton Dual Fin Vinyl Insert Black Price per Foot

7001-7-SANDSTNE

Commercial Side & Top Weather-Strip 7' Long - Sandstone 7001-SS (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (20)
41AC075-2

LiftMaster Circuit Board Assembly for Dual Capacitor Models 315Mhz ** To extent of inventory

  • Assembly includes: End panel Logic board and Light socket
  • For chain drive units with two lights ie..3575 3585 3595 PD752D and PD758D
  • Also known as 41AB075-2 41AC075-2 041AC075-2A
MK500GS

LiftMaster MiniKey Stand-Alone Keypad System ** No Longer Available

  • Self-Contained Keypad System for Door and Gated Entrances
  • 500 Code capacity
  • Grained stainless steel Surface Mount
  • Dimension: 4-1/2" H x 4-1/2" W x 3-1/2" D
  • Same as SN7000255
  • Sentex Keypad
    • .......more details
Installation InstructionsProgramming InstructionsSell sheet
9150000670

Extension Cable 1/8" 7x7 14' Sold as a Pair

  • Cable assembly for extension spring door - looped one one end the other is raw (no stops)
1104-8FT-CHARCL

Residential Side & Top PVC Weather-Strip with cap 8' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1005-2-12'

Aluminum Bottom Retainer U-Shaped 12' Long***Actual Length 12'2"***

  • For door thickness 2"
19-48047M

LiftMaster Roller Chain #48x47

  • #48 x 47 pitch with master link
  • Internal reduction chain
  • Length is 24"
MV-00026

Micanan 24V Commercial Receiver CR32-24V

Programming Instructions
71-65WTC

LiftMaster Weatherproof Case (71-65WTBOX)

  • Optional weatherproof case suited for 412LMC 422LMC and 423LMC
  • Measurements of the interior: W=5.75" L=7" D=3"
  • Measurements of the exterior: W=7" L=10" H=3.5"
CLUTCH-SHAFT-AS

Lynx Complete Clutch Shaft Assembly for HDC Operators 3/4" x 17-1/2"

  • Fits all HDC operators - waterproof or not.
UCF-1

Self-Aligning Cast Flange Bearing 1" Bore UCF205-16

  • Grey cast iron painted.
  • Comes with 2x set-screws 1/4-28
  • Square 4 bolt
MU22-2WIRE-LH-B

Miller Edge MU22 2-Wire Left Hand Black - Sold per Foot

  • €¢Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
Installation ManualWorksheetSell Sheet
MU22-2WIRE-RH-Y

Miller Edge MU22 2-Wire Right Hand Yellow - Sold per Foot

  • €¢Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
Installation ManualWorksheetSell Sheet
36190T.S

Genie Control Board 3-Terminal *** DISC..

  • Fits the Legacy overhead model and the PMX500 model and is compatible with:
  • 696CD/B
  • Genie PMX/B Model PMX500-IC/B
  • Model 496CD/B
  • GCG & GCG-L Series e.g. GCG350 GCG350L
  • PCG & PCG-L Series e.g. PCG400 PCG450L
    • .......more details
G808001

LiftMaster Lock and Key Kit

  • Lock and Key Replacement Kit. Compatible with LiftMaster® Models BG770 and BG790 Barrier Gate Operators
  • Also known as: K808001 80-8001 808001
02-401

Push Button Control Station 1-Button Surface Mount NEMA 1

  • Die-cast metal enclosure
  • START may be used as OPEN with all LiftMaster operators.
  • May be used as OPEN and CLOSE on all operators with type B2 control wiring
DS-KIT

Linear Single Delta Radio Kit ** Discontinued

  • Kit includes one DT transmitter and one DR receiver
  • Same as: DNP00011
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Installation Manual
71-90503000

LiftMaster Non-Resettable Counter Field Kit

  • A 6-digit non-resettable 24VAC electro-mechanical counter is mounted in the operator control enclosure.
  • This devise counts the number of times the CLOSE coil is energized or whenever the operator reaches an auxiliary open limit switch.
  • This corresponds to the number of complete door cycles of use.
Installation Manual
3AG3

Miniature Fast Acting Glass Fuse 3 Amp 250V (5/pkg) - 766124

  • 6 x 30mm miniature fast acting glass fuse
  • Rated voltage: 250V
  • Rated current:3A
  • ROHS compliant
WKP250LM3

LiftMaster Wireless Keypad 250-Code ** Replaced by KPW250

  • Wireless access control keypad
  • 250 code capacity - 4-digit codes
  • Wireless control of up to 4 doors or gates with additional GCUs
  • Post or surface mount standard
  • 900MHz
  • Compatible with GCU and LiftMaster® 315MHz rolling code receivers
    • .......more details
Programming Instructions
MDRG

Linear 1-Channel MegaCode Gate Receiver 318 MHz *** Discontinued

  • Activates one gate or device
  • Supplied with F-connector and whip antenna
  • Mounting bracket supplied
  • Memory: storage for up to 40 MegaCode transmitters
  • Power: 24 VAC/VDC
  • Codes: 1000000+ (MegaCode format)
    • .......more details
Programming Instructions
1086090001.S

Overhead Drive Gear for Overhead 556

  • White plastic gear only for Overhead model 556
PRO-W_MOD

Micanan Nema 4/12 Modification

  • This modification provides a TEFC motor N4/12 watertight/oiltight control enclosure waterproof drive and limit chain NEMA4 thru-beam eyes and a watertight/oiltight three-button station.
821LM

LiftMaster MyQ Garage Universal Smartphone Garage Door Controller

  • Enables smartphone control of most major brands of garage door opener with photoeyes.
  • Includes Wi-Fi hub and door sensor
Installation ManualManuel d'InstallationSell SheetBrochure
309013

Linear 1-Channel Multi-Code Receiver 310 MHz

  • Three tabs for universal mounting
  • One N/O relay
  • Compatible with 310 MHz Stanley and Multi-Code transmitters only.
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
G3T-BX

Genie 3-btn Dual Frequency Transmitter 37218R

  • This transmitter replaces all Intellicode and Overhead Door Code Dodger transmitters made after 1997.
  • For Intellicode operators pre-1997 use GITR3 for best results
  • Operates with 315 & 390 MHz Intellicode 2 technology
  • Able to control up to 3 garage doors
  • Visor clip and battery CR2032 included
  • Replaces: GIT GIC90 GMIC90 G2T OCDT ACSCTG TBSTG GIT-1 GIT-2 GIT-3 ACSCTG Type 1 ACSCTG Type 2 ACSCTG Type 3 TBSTG GIC90-1 GMIC90-3 GIC90-2 GMIC-3BL GIC90-3 OCDT-1 OCDT-2 OCDT-3 G2T-1 G2T-2 G2T-3 GICTD-1 GICT390-1 GIFT390-1 GIT390-4
    • .......more details
Programming InstructionsInstructions de programmation
108135.0004

Overhead Serpentine V- Belt for JST 31"

  • Overhead Door commercial garage door opener serpentine belt 108135-0004
  • Type "J" 31"