Devanco Canada - Get The Right Garage Door Opener‎ and Parts

G651209P

LiftMaster 10ft PVC Arm Square Yellow/Black Stripes **DISCONTINUED

Requires clamp model # G108019 sold separately
For use on barrier gate operator BG770

RESET008

Manaras Resettable Overload Fuse 11A 1 Phase

M-VERSION-N4

Manaras Monitored Entrapment Protection Option Upgrade Mont + N4/12 Eyes

Upgrades added when purchasing a commercial operator

4007-14FT

Aluminum Retainer only for Light Brush 90 degree

For angle application
For use with Light Brush or Vinyl Insert.
die # A-25060

.312-334-L

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

34030308

Polyester Lifting Sling Type 3 Eye / Eye 3" x 8'

2-ply
Minimum tensile strength of 9800 lbs per inch of width

39913625

Hitch Pin Forged Wire Handle 3/4" x 6-1/4" Red

Usable length is measured between the shoulder and the cotter pin

PPLV1-100

LiftMaster Passport Lite 1-Button Visor Remote with Sec+ 2.0 Technology 100/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Sold in a 100 pack

.......more details

Programming Instructions Instructions de programmation Sell sheet Brochure

108D79

LiftMaster Light Lens 108D0079M

Replaces 108D68 and 108D68-1

CABLE_532SS5000

Cable 5/32" 7x19 5000' Stainless Steel ** Price on request

LB412-12

Laminated Bumper Standard Black 12" x 12" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

VBELT_4L290

VBelt 1/2" x 29" (4L290) Not Cogged

V-Belt not cogged

029-98105

T-Style Replacement Door White Stainless Steel Package 029-98105

Replacement door size between 72"- 98" wide x 100.25-105" high
Painted white
Stainless steel package
Includes Hinges Rollers and Cable

.243-258-L

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

732

Fasteners Flat Washer 3/8" SAE 1" OD Zinc 1000/Box

7/16" ID x 1" OD x 5/64" thickness (ID: 0.4375’’ OD: 1’’ THK: 0.084’’)

MG020-B-2E-04

Miller Edge Sensing Edge Black 2-Wire End Outlet 4ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

GD-STEND-21D

End Cap Steel 18G 21" Double 1-3/4"

GD-STEND-18D

End Cap Steel 18G 18" Double 1-3/4"

K94-37236

LiftMaster Universal Solar Harness Kit

For 7 Ah and 33 Ah batteries

MD-00248

Sprocket 50B28 x 1" 1/4" KW 2SS 5/16"

2806.156.195

Whiting .156 x 2-3/16 x 19.5" Roadside with Cones

TL-36ML-BLUE

LOCTITE Threadlocker Blue 36ML *** Price by Quote

Medium strength
This product cures fully in 24 hours and can be dissembled with hand tools.
This product is an anaerobic adhesive applied by drops to the threads of fasteners. It then cures to a hard thermoset plastic that locks the threads together.
For metal to metal applications only

K75-34824

LiftMaster Chain Guard Kit for SL575GL SL585GL SL585U slide gate operators

Complete with: Chain Guard Chain Guides and Retainers.
Works with SL575GL SL858GL and SL585U

346

Cable Clamps Galvanized 3/16" Sold per piece

Galvanized malleable cable clip

PBTL-3-100

Key ONLY for PBTL-3 Z100 Sold per Key

Cut Key # Z100
Price for 1 key

C-514-INSTALLED

Cones 5-1/4" Factory Installed (Pair)

For do-it-yourself installation use part no. SF514U

.343-514-L

Cut-to-Length Torsion Spring .343 x 5-1/4" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-525-INSTALLED
If cones are required a filler must be added use part # FILLER

7001-18-CHARCOL

Commercial Side & Top Weather-Strip 18' Long - Charcoal (H)

Charcoal galvanized steel with charcoal dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

K002B0821-1

LiftMaster Transformer for EL1SS and EL25

120 volt input power plugs into a standard outlet
16VDC output 2.5 amps

37314

Doorlec Relay Mini 120V

For overrun pre-wired 25 Amp

SNS1P6

Belden RG6 Co-axial "F" Male connector Snap-N-Seal

K77-37986

LiftMaster Current Sense Conversion Kit 3PH L5

1104-14'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 14' Long - Light Bronze (F) **NLA

Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

K20-3050B-4P

LiftMaster Electric Motor 1/2 HP 208/230/460V 3Ph L3 L4 Contactor

Standard 1/2 hp motor
Same as 20-3033-1

PRO-HBH10011U-R

Micanan 1 HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

1 HP115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

60-7252

Wheel Chock Wall Bracket 14"w x 8"h x 4-1/2"d Painted Grey

Wall bracket only
4-1/2" projection

41D8181

LiftMaster Cover

E/BLOP/128

Double Channel Loop Detector- factory installed on logic

5001-WG-16-MOAK

Residential Side & Top Weather-Strip 16' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

1104-10FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 10' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

28-00190

Truck Door 1" Std Vert. Track and Angle Assbly Curbside (RH) 96.5" Todco Style

Fits Todco style doors
Galvanized steel 14-gauge construction
Includes J-style channel mounting angle with track and operator bracket
For door opening less than 90" high
Fits door sizes 72 - 90" high
Cross ref: T #49014-1 T #41034-1 & W #4046

.......more details

BK028/PR

Commercial Light Duty Bottom Bracket 2" Track 13-g BB-90 Sold as a Pair

For 2" track with 7/16" diameter stem rollers
Milford pin cable attachment
For 1-3/4" doors
Size: 8" tall x 3" wide
Includes 1 left and 1 right hand bracket
BB-90 MPL

.......more details

K75-12870

LiftMaster Complete Door Arm Kit for Trolley Operators

Kit includes: Curved Arm Straight Arm Door Bracket and Hardware
For All LiftMaster Trolley Operators except HCT and APT

6944.1

Whiting Top Closure Assembly Stainless Steel Dry Freight

This is a Whiting original part

2704.192_340

Whiting Roadside Torsion Spring 2-3/16" ID 34" Long

Torsion spring wire only
.192 wire size

36451A

Genie Front Idler Assembly 36451A.S *** No Longer Available

Works on ReliaG 800 2022 2024 2042 ReliaG 600 ChainLift BeltLift 1022 1024 and 1042 Series Units

NUT022

Manaras Lock Nut Zinc Plated 3/8-16 Hex Nylon

Used on old MJH

XT2564-00-W

Xcluder Rodent Block 4" Black 75' Reel

For commercial and residential applications
Creates a tough barrier that is virtually impenetrable to rodents

Sell Sheet

029-98290-PRIMR

W-Style Replacement Door Primer Only Stainless Steel Package 029-98290

Replacement door size between 96-1/4" - 98" wide x 72-90" high
Primer only
Stainless steel package

28020010-500

Cable Stainless 5/32" 1x19 500' Inox ** Price on Request

Not for use in aircraft applications
1x19 contruction type 302 / 304

Comparison charts

K20-1050B-2TLP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph L3 L4 TEFC

V3564-00-W-200

Vinyl Seal 4" Bottom Bead End Grey 200' Spool

Bead diameter 3/16" - 7/32" +/- tolerance

ME123-M-YEL-RH

Miller Edge Yellow RH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

16-4L290

LiftMaster Cogged Vbelt 4L 29"

9382263800

Square Torsion Spring .375 x 6 x 38" with Cones RHW 1-1/4" Bore

374UT

LiftMaster Universal 2-btn Mini Transmitter

Dual frequency universal transmitter
Will activate 2 different types of openers (1 on each button)
Compatible with major brands except Marantec & Hormann
This mini remote is NOT compatible with DIP switch remotes or receivers

Programming instructions Sell sheet

22210

Push Button Station 3 Oval Buttons O/C/S Flush Mount ** discontinued. To Extent of Inventory

Three button wall station Open/Close/Stop
NO contacts on the Open and Close buttons
NC contact on the Stop button
Stainless steel surface plate
Flush mount

MD-00031

Roller Chain #40 Nickel Plated Sold by the Foot

50180

Doorlec Brake Assembly 120V

21-7115-1

LiftMaster Transformer 115/230V 1Ph

745266

Strobe Low Profile Amber LED Warning Light 12-24VDC

Fully encapsulated electronic circuitry ensures a lifetime of trouble-free operation.
Installer can select the flash pattern of each high intensity strobe by wiring the unit according to the flash rate preferred.
4 7/8" X 5 7/8" Rubber base Surface mount 12-24VDC

65-52091-16

LiftMaster Manual Hoist Mod. M8 #41 Chain for 16ft High Door

For 3/4 Hp & 1 Hp Trolley operators
Includes floor level brake release cable 1" x 12' round bar.

MGS20-B-2U-06

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 6ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

PRO-TB-7523-U

Micanan 3/4HP 230V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

CABLE_1/8SS5000

Cable 1/8" 7x19 5000' Stainless Steel ** Price on request

MD00045

Micanan Spur Gear 12B72-1

FHKS3D-74

Stainless Steel Face Hardware Kit 3" Track Double End Stile 4 Panel 7 Sections

Kit includes: Top & Bottom fixtures Center hinges End hinges and Hinge screws.
304L rust-resistant stainless steel
12 gauge

102079

Flangette Retainer football style 2 pieces 2 hole PFL6Z PFL206

2 required per bearing # 101475
works with: 1-1/4" bore sealed insert bearing part # SB206-20

REDUCER025

Manaras Reducer 45:1

HBS3U

Stainless Steel Bottom Fixture 3" Door 2-3" Track Single End Stile Sold per Pair *Includes (1) Right and (1) Left Bracket (2) U-Brackets) (2) Clevis Pins (2) Cotter Pins*

Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
Laser Cut for a Clean Finish
For 3" Doors
Fits 2" or 3" Track
Single End Stile
Pins and Cotters included

.......more details

CP-BRG-58

Lynx Bearing 5/8"

6 in total on a MCJH

SF375-114

Spring Fitting 3-3/4" Pair (Long Ear) 1-1/4" Bore

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1-1/4" solid shaft
3-3/4" fittings can be combined with 6" spring fittings for duplex assembly.

.......more details

R5206

Saddle Support for 5" Pulley

11 gauge galvanized steel

R5205

Saddle Support for 4" Pulley

8 gauge galvanized steel

1005-1-1/2-10'

Aluminum Bottom Retainer U-Shaped 10' Long

For door thickness 1-1/2"

PHOTO-038

Manaras Non-Monitored Photoelectric Cells Nema 4/4X/6P/12/13 Retro-Reflective

Retro-Reflective
24Vac 30' range
Includes 3" reflector

MARED12

LiftMaster Red LED Light Stip 9.9ft Long ** Discontinued

Provides LED visibility on both sides to 12 ft. arm.

DF104.2

Whiting Dry Freight Door 3/4" with Track Balancer and Standard Hardware

Standard features include: 2-cable balancer with independent springs
Balancer springs treated with rust preventative
All door hardware is E-coated
Spring loaded lock catch
Heavy-duty 2" 13-gauge track
Stainless steel aircraft cables

.......more details

MAREDLED17

LiftMaster Red LED Light Stip 13ft Long

Provides LED visibility on both sides to 17 ft. arm.

28773A

Genie Idler Pulley for Belt Drive

Fits PMX500-I B/C Belt & Chain drive model
Front Pulley for belt channel applications only.
Compatible with the Ovehead Door Legacy BELT DRIVE (model #696 and #496) and Phantom (model #777) garage door opener
Part Numbers: 28773 28773AS 28773S 38773A

.250-334-R

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Green

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

79-16088

LiftMaster Circuit Board Assembly for LGO **discontinued**

Same as K79-16088

MX00145

Micanan Brake Assembly for PRO-APT Solenoid NOT included ** DISCONTINUED

Discontinued. Use part number MX00140

11-10705

LiftMaster Output Shaft MH

32-34792

LiftMaster Gear Reducer Nema 56C 30:1

Compatible with LiftMaster® Model SL585 Slide Gate Operators
Same as K32-34792

BCSI-HV-100-21

Industrial Slide Gate Operator Variable Speed 1 HP 240V 1 Ph with Heater ** Price by Quote Only

Heavy-duty alminum cabinet Nema 3R
Programmable logic controller
Adjustable friction clutch
Thermostat controlled heater
Opening / Closing speed of 24" / sec
Nema 4 control panel

.......more details

Installation manual Sell sheet Brochure Installation overview Dessin de installation Diagnostics and troubleshooting Diagnostics et dépannage

R5995

Shaft Collar 1-1/4" Double Split

26-945255

Truck Door Intermediate Panel (15.5" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

K72-19975

LiftMaster Clutch Shaft and Sprocket Assembly

Assembly includes: Clutch shaft 1" keyed flange bearings Dual sprcket 32/14 Splined core sprocket E-ring Compression spring Pulley assembly Washers Thrust bearing Retaining ring Slined hub and roll pin
Compatible with DJ J operators

9150000620

3/32" Sleeve ONLY 100/pkg

Sleeves only 100 per pack

SPF514-6

Spring Filler 12 ft Long No Fins

For use with 5-1/4" or 6" torsion springs
Accomodates both 1" and 1-1/4" shaft size

DL91201

LiftMaster HID PROX 1346 ProxKey III *Discontinued Replaced by LMPK3-ST*

Pocket size key fob
Low cost entry level compatible with HID Prox Readers.

CP-PU-DRV-HDC

Lynx Drive Pulley 7/8" x 8" 5L HDC

7/8" shaft
8" diameter

K75-12586

LiftMaster Complete Brake Assembly GH 575V

Complete assembly includes: Brake hub kit Brake release lever Brake disk Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Fastener.