Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

1003-2-8'

Aluminum Bottom Retainer L-Shaped 8' Long

  • For 2" thick doors.
18-RWB-PAIR

Winding Bars Round 18" Set of 2

  • Cold rolled hardened steel.
  • Machined to 7/16" at one end with 1/2" outside dia. on the other.
  • Sold as a pair.
25-42-170

Extension Spring 7' Door - 170 lbs Orange

  • Double - Loop
  • 25" long 42" stretch 170 lb load
  • Sold individually
  • Rated for 10000 cycles
25-42-120

Extension Spring 7' Door - 120 lbs Green

  • Double - Loop
  • 25" long 42" stretch 120 lb load
  • Sold individually
  • Rated for 10000 cycles
33LMC

LiftMaster 3-btn O/C/S Transmitter 390MHz *** Available to Extent of Inventory** use 813lmx

  • 390 MHz 9 dip switch three button visor remote
  • Can be used for Open/Stop/Close when used with the LiftMaster 423LMC receiver.
  • Visor clip & 12V battery included (ALK12V)
  • Same as 33LM
  • Can be used as a substitute for 63LMC
26-40026

Truck Door U-Channel Seal Retainer 96" Long for Whiting DryFreight Doors *** DISCONTINUED

  • Aluminum extrusion construction
  • Cross Reference: W #1801
26-14325

Truck Door Bottom Panel with Seal (15" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
  • Comes only with bottom retainer and seal (installed)
25E10270

Truck Door Shaft Cover for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Attaches to bottom panel for roller support
  • Shaft cover for 1 stud
  • Cross Reference: W #1021
CBB125

Stop & Sleeve 1/4" 100 pair

  • Includes 100 stops and 100 oval sleeves
CBB532

Stop & Sleeve 5/32" 100 pair

  • Includes 100 stops (9150000628) and 100 oval sleeves (9150000622)
Z9003

Pusher Spring - 27" Sold as a Pair

  • Pusher spring 27" long with 15" travel. Sold as a pair
R5209

Cast Iron Pulley 4"

  • Bored for 3/8" diameter bolt
  • Maximum cable diameter: 1/4"
  • Cast iron pulley mounted on two pressed sealed bearings
  • 300lb load rating
41A5034

LiftMaster Snappy Beam Sensors ** DISCONTINUED USE 041-0136

  • Will work on all LiftMaster residential openers equipped with safety beams
  • For newer models 1999-current will fit on existing brackets
  • For older models 1993-1999 new brackets #41A5266-1 are required or use old style safety beams #41A4373A
  • New Gen ( 2021+) operators will have new snappy beam sensors part number 041-0136
  • Not compatible with the New Gen (2021+) 041-0155 snappy beam brackets
CUSTOM4X8PO

Devanco Loop 4'x8' rigid-pvc pave-over

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
6X10SC50

Devanco Loop 6' x 10' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
4X8PO50

Devanco Loop 4' x 8' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
971LMC

LiftMaster 1-btn Security+ Transmitter 390MHz

  • 390 MHz Security+ single button visor remote
  • Compatible with Security+ systems with Amber learn button including Chamberlain Sears Craftsman and Raynor code rolling residential openers (Safety Signal) manuifactured 1997-2005
  • Visor clip and Lithium battery included (part #CR2032)
  • Same as 971LM 91LM 950CB 950CD
1104-8FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 8' Long - White (W)

  • White rigid retainer with white flexible vinyl.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
UN201

LiftMaster Thermostat Controlled 500-Watt Heater & fan for MAT Gate Operators and more

  • For temperatures below 32 F
  • Designed for use with Mega Arm Tower gate operator
  • Can be used for other applications as required
  • Heater operates when termperatures are below freezing
  • Plugs into a standard 120V outlet
  • 500 Watts with a circulating fan
  • .......more details
MV00077

Interlock Switch for Sectional Doors

  • Mounts on the door track to prevent the use of the operator when the door is locked
3PHCONV

LiftMaster 3-Phase Conversion Kit

  • The transformer kit will convert an input voltage of 208 / 240 / 480 / 575 3 phase VAC to an output voltage of 120 VAC.
  • Included in New 3-Phase Transformer Kit: Transformer with bracket (2) Cable ties Bushing Wire sleeve 2’ (.61 m) (5) Wire nuts Mounting bracket 10-36745 and mounting hardware (for installing on CSW24U operators) (6) Operator rating replacement labels Accessory outlet rating replacement label
  • Compatible with SL3000501U SL3000101U CSW200501U and CSW200101U AC gate operators only
.319_5-1/4"-RH

Torsion Spring .319 x 5-1/4" x 12ft RH Blue/Green

  • Wire size: .319
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.363_5-1/4"-RH

Torsion Spring .363 x 5-1/4" x 12ft RH Green/White

  • Wire size: .363
  • Inside diameter: 5-1/4"
  • Length: 12 ft
8833TC-OCS

Allstar 3-btn 3-Door O/C/S Transmitter 109025 318 MHz ***Replaced by P-8833TC-OCS

  • Open/Close/Stop remote for 3 doors
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Slide switch selects door to operate
  • Power: 9-volt battery
  • .......more details
36645R

Genie Screw Drive Coupler

  • This coupler only works on the following models manufactured after June 2011.
  • TriloG 1200 (3064) TriloG 1500 (4064)
  • PowerMax 1200 (3062) PowerMax 1500 (4062)
  • GPower 900 (2564)
  • Powerlift 900 (2562)
RADIO-KIT004

Manaras plug-in receiver for Board 70 operators 390 MHz

  • Direct ECB plug-in receiver card kit (RADIO-RE101C) for adding or replacing on-site.
  • Maximum 16 transmitters per receiver.
  • Compatible with transmitters RADIOEM101 and RADIOEM103 SD/MD
786

Fasteners Hex Nut 1/4-20 1000/Box

MOTOR254-WIRED

Manaras Electric Motor 1/2HP 120/240V 1PH Wired (MOD025A04)

  • Continuous-duty base mount 60Hz
  • This item is compatible with BRAKE011
7119405

FAAC 400 Plug for End Cap

H11G06

Hinge #6 x 11 gauge

  • 11 gauge #6 hinge - 0.79 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
24851

Stanley Traveler Carrier Kit

  • Works with all Stanley chain drive units from 1992-present
  • Same as part no. 9200014
  • Trolley slider for part no. 49563
BK306

Jamb bracket J-06 #6 12 gauge

  • Sold by the piece
  • Height 3.50" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
PL-B12-ARM-CURV

Lynx Curved Arm for Proline Operator

  • Used on Proline residential garage door openers
SEF2410

Erone Ultra Flat Infrared Photocell 10M (33ft)

  • Fixed orientation 1 sender and 1 receiver
  • Range 10M (33ft) in all conditions
  • Adjustable Sensitivity
  • 1 "NO" and "NC" contact
  • Power supply 12/24 Vac/dc
  • Will work with all commercial operators
  • .......more details
MOD081

Manaras Damp Environment Oil and Dust Tight Modification Supplied with Monitored N4 Eyes

  • For applications where dust water spray oil leaks or any other type of condensation is present.
  • Includes TEFC motor seal-tight conduit and connectors NEMA 4/12 O/C/S push-button station NEMA 4/12 control box
  • If operator is monitored this modification will upgrade the photoeyes to NEMA4 as well
MI00002

Micanan Pulley 8" OD c/w Bushing 3/4" ID

CB380250

Cable 3/8" 6x36 IWRC 250' Galvanized Wire Rope

  • This rope is most commonly used on small overhead cranes and pulley systems.
  • Provides strength and flexibility but not a lot of wear resistance.
  • Cable break strength: 13600 lbs
373LMC

LiftMaster 3-btn Security+ Transmitter 315MHz

  • Visor clip and 3V lithium button cell (CR2032) battery included.
  • Same as Chamberlain model 953D
RS1039-C

Roller 3" Steel 9" stem 10 ball Torque Force

  • Steel Roller Wheel diameter: 3"
  • Working length: 8.5"
  • Overall length: 9.64"
  • Box qty: 75
DW-3S-300

Fraba Air Wave Switch Larger Housing with Copper End NOC

  • Fraba DW3S-300 air switch 10008797-2
  • Normally Open Contact (NOC)
  • Screw Type Connector
  • Dimensions: 158x60x39 mm (6.22" x 2.36" x 1.54 '')
  • Housing: ABS Switch: PA6V0 Nema4
  • Normally Closed Contact achieved by adjusting the sensitivity screw
  • .......more details
1003-2-14'

Aluminum Bottom Retainer L-Shaped 14' Long

  • For 2" thick doors.
821LMC-S

LiftMaster Smart Garage Control White

  • Smartphone control: Control secure and monitor your garage door from anywhere.
  • Universal: Works with all major brands of garage door openers manufactured after 1993.
  • New design: Compact modern design with a white finish that blends in with ceilings walls and garage doors. New mounting plate simplifies install.
  • Improved setup: Bluetooth Low Energy (BLE) integration makes setup easier than ever.
  • Download the myQ® App and follow the in-app instructions to get set up in minutes.
158176

Set Screw 3/8-16-1 Cup Point Zinc Plated Red Head

XF600VAC12

LiftMaster 600V Transformer Kit 1200

  • For use with various LiftMaster® MAXUM Series DC 1200 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators
HD3117

Heavy Duty Slide Lock 2.85" Throw Zinc Plated

  • Mounting holes: 0.275"
MOTOR337

Manaras Electric Motor 3/4HP 120/240V 1PH

  • C-flange continuous-duty
5-38-10

2" Horizontal Track Set 8'6" (7ft Door) 10" Radius 16ga 2-pcs

  • Left/Right hand horizontal track set 10" radius
  • Garage Door Residential usage
MD-00242

Sprocket 41B14 x 3/4"

MQ00020

Micanan Spring Pin 3/16" x 1-3/4" Long

OPH-6214-M-N1-LH

Manaras Opera-H 1 HP 240V 1Ph with Monitored Board and N1 Photoeyes Left Hand

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
50111

LiftMaster Center Support Bracket ATS211X-14 Sold per Unit

  • For 14 Feet ATS211X CD1014 Rail
2704.177_13.5

Whiting Roadside Torsion Spring 2-3/16" ID 13-1/2" Long

  • Torsion spring wire only
  • .177 wire size
TDC1222-8

Liftmaster Commercial 8FT Trolley Angle set (10-5808-P) and #41 chain pack (TDC41-10) ***Actual length 131"***

  • Double Angle Rails for doors up to 8'6" high
  • Includes #48 chain pack
400-CBAC-EG-115V

FAAC 1042011277 Long (EG) Gate Arm w/Positive Stops 50-1/2" L *** Price by Quote Only

  • 400 CBAC EG Long Arm with positive stops
  • For hydraulic Swing Gate Operator
  • This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system
GALV-295-6-144-L

Torsion Spring .295 x 6" x 12ft LH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-306-334-144-L

Torsion Spring .306 x 3-3/4" x 12ft LH Galvanized Red

  • Wire size: .306
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-306-258-144-R

Torsion Spring .306 x 2-5/8" x 12ft RH Galvanized Red

  • Wire size: .306
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-283-334-144-R

Torsion Spring .283 x 3-3/4" x 12ft RH Galvanized White

  • Wire size: .283
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-283-2-144-R

Torsion Spring .283 x 2" x 12ft RH Galvanized White

  • Wire size: .283
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-273-2-144-L

Torsion Spring .273 x 2" x 12ft LH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-273-2-144-R

Torsion Spring .273 x 2" x 12ft RH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-334-144-L

Torsion Spring .250 x 3-3/4" x 12ft LH Galvanized Green

  • Wire size: .250
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-258-144-L

Torsion Spring .250 x 2-5/8" x 12ft LH Galvanized Green

  • Wire size: .250
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
41176R

Genie Shaft Assembly Kit 6070/6170

Q123

LiftMaster Electric Motor 12VDC K20-9012B-1

  • For use with various LiftMaster® Slide and Swing Gate Commercial Door Operators
12-1009

PVC Strip 6" x .060 Standard Clear Smooth for Replacement Strip Curtain Sold per Foot

  • Suitable for most average applications.
  • Temperature Range: -20°F to 150°F (-28° C to 66° C).
  • Formulated with ingredients that meet USDA requirements for incidental food contact.
BEA-10LIGHT-TG

BEA Modular LED Signal Light Segment Green

  • LED SIGNAL MODULAR LIGHTS offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
  • These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules
  • Dimensions of Light Segment: 2.75 in × 2.38 in (H)
59206

Todco Operator Bearing Shallow Header Roll Up Door

AE-100

Linear Commercial Single Door Telephone Entry System (ACP00937)

  • Designed for use as a primary access control device for apartments condominiums and offices with up to 125 residents.
  • Installation choices: surface mount recessed gooseneck
  • Stainless steel front panel
  • Telephone style keypad with lighting
  • Accepts a total of 125 directory listings or stand-alone entry codes
  • TTY jack for connection to text communication for the hearing impaired
  • .......more details
2200-015-UPS

Linear Collar Set 1B 9/16 LTB

768-500

Fasteners Lag Screw Full Thread Hex Regular Profile 5/16" x 3" 500/Pail

  • 7/16" head
  • Hex Washer Regular Profile Head
EHJX-353-1

Doorlec Industrial Jackshaft Op. Explosion Proof 1 HP 575V-3Ph ** Price on Request

  • Explosion proof NEMA 7/9 Heavy-Duty Industrial Operator
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse.
  • Solenoid Brake prevents coasting and secures the door when closed
  • Explosion-proof (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
  • .......more details
PROBE-200

EMX CARSENSE-101 Direct Burial Probe with 200' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
P-8833T-OCS

Pulsar 3-btn 1-Door O/C/S Transmitter 109372-Compatible 318 MHz

  • Open/Close/Stop remote for 1 door
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
  • .......more details
MK00697-UPGRADE

Micanan Fraba N-4/4X Photocells Supplied in Lieu N-1 UPCHARGE

  • Exterior Through-Beam Photocell
  • Sensing Distance 45 Feet
  • UL325/2010 Recognized Component
  • Comes with Sender Receiver and Brackets
  • NEMA 4 & 4X
50220

Doorlec Lifting J-Arm Assembly Trolley

26141

Doorlec Cam Shaft 9-1/4" x 5/8" (24 x 1.59cm)

25130

Doorlec Seal Oil CR6372

K20-3100M-5-H25

LiftMaster Electric Motor 1 HP 575V 3P L5

  • For use with various LiftMaster® Logic 5.0 Commercial Door Operators and Slide Gate Operators.
  • Also known as: 20-3100M-5 K20-3100M-5
PHOTO-073

Manaras Non-Monitored Intrinsically Safe Retro-Reflective Photocell 30' Range incl. 3" Reflector

  • Retro-Reflective photo cell
T-931-S

FL-Heddolf 1-btn Transmitter 311 MHz

2376.187*29.900

Whiting Torsion assembly .187 wire size 29" spring length 90" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
2100-1750

Linear Key Brake Disc 1/4 x 3/16 x 1-1/4

NINJA-001-BLACK

Rodent Ninja Garage Door Corner Guard Set

  • Blocks pests from entry
  • Fills in holes and gaps along garage door frame
  • Keeps insects mice and unwanted guests outdoors
  • Kit includes: (1) Right and (1) Left handed Garage Door Corner Guard (6) Self-tapping Screws
  • Made in the USA
E/BLOP/130

Automatic Systems Kit for Breakaway Arm BL229 Option ** Price by Quote Only

  • This is an option for the BL229 arm
GALV-312-334-R

Cut-to-Length Torsion Spring .312 x 3-3/4" Right Hand Wound Galvanized Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
  • Galvanized
GALV-225-258-R

Cut-to-Length Torsion Spring .225 x 2-5/8" RHW Galvanized Orange/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
227653

Linear Sprocket

  • HCI Drive Sprocket
GALV-273-258-L

Cut-to-Length Torsion Spring .273 x 2-5/8" Left Hand Wound Galvanized Orange/Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-295-334-L

Cut-to-Length Torsion Spring .295 x 3-3/4" Left Hand Wound Galvanized Blue Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
GALV-262-258-L

Cut-to-Length Torsion Spring .262 x 2-5/8" Left Hand Wound Galvanized Red/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-207-2-L

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Galvanized Brown Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
CT755L5

LiftMaster 3/4 HP 575V 3p Commercial Trolley Op with Carwash Mod Logic 5

  • Low profile trolley operator with brake included
CCTD-02

Fuse 600VAC/300VDC Class CC Time Delay 2AMP Sold per Fuse

  • Sold per fuse
RS36203

Roller 3" Steel Roller Head Only Heavy-Duty 6203 Bearing 5/8"

  • Steel Roller Wheel diameter: 3"-C 6203 bearing
  • Roller Head Only
R6000

Shaft Collar 1" with 2 Set Screws

  • Set Screws: 5/16 x 18
OSH-6212-M-N1-LH

Manaras Opera-SH 1/2 HP 240V 1Ph Monitored w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
TS125

Wayne Dalton Thermospan 125 Steel Panel

  • Wayne Dalton’s Thermospan® Model 125 sectional door features a foamed-in-place polyurethane core
  • Standard joint seal that provides a substantially higher thermal efficiency than industry standard polystyrene insulated doors
  • The Wayne Dalton Thermospan® Series doors are the only sectional doors in the industry with patented roll-formed integral struts on each section making them the most rigid doors available
  • Thermospan® Model 125 is suitable for commercial and industrial applications.
BEA-10-WBA

BEA Universal Mounting Bracket

  • Extendable from 15.35" - 23.62"
  • -90 to 90 degree tilt range
  • Self Drilling screws provided
  • Carbon Steel Black Powder Coated
RW-213-041

Fasteners Flat Head Carriage Bolt 5/16"-18 x 3/4" 1000/Box

  • Full length thread
  • Plated