Devanco Canada - Get The Right Garage Door Opener‎ and Parts

2376.171_22.840

Whiting Torsion assembly .171 wire size 22" spring length 84" shaft

19-41240D

LiftMaster Drive Chain #41 10' Box Black Oxide

#41 chain 240 links

IRB-RET

EMX Industries Universal Retroreflective Photoeye Nema 4X New UL325-2016 *** To extent of Inventory

Type B1 non-contact sensor
UL 325-2016 compliant
Operating range up to 60 ft. (18.3 m)
NEMA 4X enclosure
Sensitivity adjustment: potentiomete
Mounting bracket and reflector provided

.......more details

Installation manual Sell sheet

XP4040CUSH689

Heavy Duty Door Closer

Heavy Duty Door Closer with Spring Cush-N-Stop Arm

39914650

Hitch Pin Forged Wire Handle 7/8" x 6-1/2" Red

Usable length is measured between the shoulder and the cotter pin

OCS-PANEL

GDI Panel Buttons Open/Close/Stop N1/ N4 G3253

Power LED

CR-2

Battery CR2 3V Photo Lithium Battery

Camelion brand

BL-09

Barlock Kit Complete for 9ft Wide Door Kit includes hardware bag

Kit includes hardware bag and bars (55-1/2")

Assembly Manual

LDCO800

Linear 800 Newton DC Powered Garage Door Opener Accept Both Belt or Chain Rail *Replaced by LDCO863B*

The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
Optional Battery Backup available for added peace of mind. Sold separately
Low-power standby mode dramatically reduces energy consumption
Supplies 800 Newtons of lifting force for heavy doors
Compatible with belt-drive or chain-drive T or I beam rails up to 10'

.......more details

Installation manual Sell sheet Remote compatibility chart

26-943255-CUT

Truck Door Bottom Panel with Seal (15.5" x cut-to-size) for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

PULL-CHAIN-ASSY

Pull Chain Spring and Chain Assembly 13' & 14' Doors

Used with a hand chain for full vertical doors.
Eliminates the need for leaf bumpers
Chain can be adjusted for smaller doors

104462

Marantec 7ft Belt Rail 1.2mm Heavy-Duty M13-1207B

1-piece rail

RBH101L5-LH

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation manual Manuel d'installation Sell sheet

5001-9-BLACK

Residential Side & Top Weather-Strip 9' Long - Black

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

CSW24UL

LiftMaster 24VDC High Traffic Commercial Swing Operator

24VDC swing gate operator with battery backup
Heater NOT included. Heater sold separately # HTR
Continuous-duty motor with soft start/stop
Receiver holds up to 50 remotes
Power: 115V or 220V Single Phase
Built-in surge protection

.......more details

Installation Manual Sell sheet Brochure Site plan

HTRNB

LiftMaster Heater Kit for AC Pad Mount Gate Operators

Heater kit for pad mount AC gate operators.
Battery bracket NOT included.
Protects system to -40° F and installs on operator frame
Measurements: 6 x 2 3/8 x 3 3/8

SETR2641AM2C

Erone 2-Channel Mini Transmitter Dark Red 433MHz

Heavy-duty construction
Elegant & easy to carry
Light grey and dark red base with dark red buttons
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

.......more details

Wireless System Chart

NTL-400

Devanco Canada Clear Door Lube 425g Aerosol

Ozone Friendly Door Lubricant with anti-wear and extreme pressure additives.
Silicone Free
Non-drip clear formula provides long lasting lubrication and protection where metal to metal friction occurs. •Ideal for use on door tracks hinges springs rollers chains cables gears and more.
15 oz Cans
Available for private label
Same as 400-HD

.......more details

Safety data sheet Fiche de données de sécurité

ALUM-562

Aluminum 24" x 100' Spool Commercial Brown # 562

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 562
Reverse side is #431 Bright White

Colour chart

PBTL3-BLACK

Replacement Button Only - N/O Open / Close Black

N/O switch and rubber cover for PBTL-3

ALUM-525

Aluminum 24" x 100' Spool Black / Noir # 525

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 525
Reverse side is #431 Bright White

Colour chart

PC50CNT20KIT

Carlo Gavazzi Transmitter and Receiver Thru Beam Kit 20m Range (PC50CNT20R and PC50CNT20RP)

Kit includes PC50CNT20R (emitter) and PC50CNT20RP (reciever)
Operates on 12-240 VDC and 24-240 VAC supply voltage.
The PC50CNT20R has a 3 amp relay output
Adjustable sensitivity modulated infrared light make and break (light/dark) switching function LED indications for output ON signal stability and supply ON
Same as Albany 4904R0007 / PC50CNT20RP8M1370

2594

Whiting Bearing Retainer

LYNX-6000-BOARD

Lynx 6000 Commercial Logic Board

Replacement logic board for Lynx commercial operators built from 2002 through 2005
Will not work for the ALDJ Model (Light Duty)

Basic Operation Manual

TUBE_SHAFT_12FT

Hollow Shaft 1" x 12'-10" Galvanized 16 gauge

When ordering order one foot longer that actual door width

1003-3-DF-CUT

Bottom U-Rubber 3" Dual Fin Black Sold per Foot

Sold in cut-lengths per foot.
Dual fin

CSL24UL

LiftMaster New 24VDC Commercial High Traffic DC Slide Gate Operator

Battery Backup: 208 cycles or up to 24 days of standby power when the power is down
Security+2.0®: Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used
MyQ®: Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app
Soft start / stop extends operator and hardware life in high-cycle and heavy-gate applications
Wireless dual-gate communication eliminates expensive conduit costs and unsightly driveway scars
Keyed manual disconnect when unlocked allows gate to be operated manually.

.......more details

Installation manual Manuel d'installation Sell sheet

PULLEY007

Manaras Clutch Pulley 8" x 1" bore

20-1050B-2RLP

LiftMaster Electric Motor 1/2 HP 115/230V 1P Base Mount

Replacement motor for APT
Also known as 20-1050B-2RL 20-1050B-2R K20-1050B2R
For L3 and L4

CHD200

Chain Hoist Direct Drive Assembly 200 D

Sectional door Direct drive - 1" shaft
Requires keyed shaft
Includes: 2 shaft collars
Fits 3-3/8" min. offset
Includes 26' of chain

MU22-2WIRE-E-B

Miller Edge MU22 2-Wire End Black - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

MU22-2WIRE-E-Y

Miller Edge MU22 2-Wire End Yellow - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

PHOTO-062

Manaras Monitored Photoelectric Cells N1 Thru-Beam 20' Range ** NLA use PHOTO-070

Monitored NEMA 1 enclosure through-beam type photocell
4-Wire
Indoor
Range: 20 ft

38874R3.S

Genie Electronic Circuit Board Assembly

Replaces board 38001R3.S and 37470R3.S
Compatible with Genie Series 3 model 3024 garage door opener systems and Overhead Door Series 3 Model 7030

50ACTWF

LiftMaster Receiver Logic Board AC WiFi*** Discontinued and replaced by the 050ACTBMC

This is a 315MHz Security+ 2.0® Receiver Logic Board featuring Wi-Fi with MyQ® technology.
For use with various LiftMaster® and Chamberlain® AC Chain or Belt Drive Garage Door Openers; manufactured after 2011.
The unit will feature a yellow learn button
Also known as: 1D8088-1 045ACTWF 1D8808-3 041D8088 50ACCL5
Same as 050ACTWF
1 Year Warranty

.......more details

IRB-MON

EMX Industries Nema 4 Through-Beam Photocells with Gold Hoods New UL325-2018 *** No Longer Available

Type B1 non-contact sensor
UL325-2018 compliant
Lens-less design
Simple 2-wire connection
Relay contacts available
NEMA 4X enclosure

.......more details

Installation Manual Sell Sheet

MC00012

Micanan Gear Reducer PRO-GOHD BHC 63 40:1 56C

NIR-50

Emx Industries Retro Reflective Photoeye Sensor with Reflector (5250-2)

Extended range for better performance in rain and snow
Compact design mounting hardware and indicators make it easy to install
Lower current draw of only 28mA makes it an excellent choice for solar and low voltage applications
Watertight package and optional protective hood offers protection for the NIR-50 from the elements and vandalism
Flexible voltage 12 – 240 Volts DC 24 – 240 Volts AC
Watertight package for reliable outdoor installation

.......more details

109441.0002

Overhead Complete Limit Switch Assembly JST

Replaces part number 109441.0001
Replacement has 3 limit switches

ZT36640159

Rolling Steel Door Model 702 Firestar No 2 Slat 22-Ga

90_9210MO

LiftMaster Auxiliary Limit Switch Mod M62 Open Factory Installed

Provides a limit switch for use by others to control auxiliary devices such as lights heaters dock levelers or other equipment.
The switch can be used to turn on or off such equipment when the door is fully opened or fully closed.
When ordering specify whether the auxiliary switch is required on the OPEN or CLOSE side of the control enclosure.
A maximum of 2 switches per operator can be supplied.
Each switch is SPDT (form C) and is rated 10 amps at 125/250 VAC
Wire leads are provided on field install kits

.......more details

072017.0001.S

Overhead Travel Nut for RCH

Teflon travel nut

MODKIT013A

Manaras Timer to Close Kit 0s-100h Med-Duty

Timer To Close Kit for Manaras Commercial Door Operators with reversing contactor style control box.
Includes Timer base and all required wiring
Detailed installation instructions are included

Installation Manual

MO00003

Micanan Compression Spring for PRO-H/HB

0.80 ID x 0.092G x 1.80 Long

MG00021

Micanan Flat Washer 7/8" ID x 1-1/8" OD

108D34

LiftMaster Light Lens K108D0034

Compatible with models 1270 1280 1280R
Fits older chain drive models with 2 lights: 1250 1265 320WD 1260LK 220WD 1260LK 220WD 1355

26-942255

Truck Door Bottom Panel with Hardware (15.5" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Primer Finish
Comes with 18" pull strap assembly two bottom roller shaft covers and stud plates standard lift handle two u-bolts flexible PVC bottom seal and aluminum seal retainer.

.......more details

D6375-164

Cable Drum High Lift 164" 1" Bore Torque Force Pair

Maximum hi-lift: 164"
Capacity: 800 lbs per drum
Cable length: Floor to shaft center 181" minus amount of Hi-Lift
Cross reference: DNS 410-164 OMI 164HL M162-4165

97799

Marantec Shark Tooth Position Reference Tab Belt Rail (96834)

Same as part number 96834
For belt rail

Replacement Instructions

UCP207-20

Precision Pillow Block Bearing 1-1/4" Bore

6-9/16" overall length
5" hole center to center distance

MK-00098

Micanan Boot for Cut-Out Switch

29-ABC-15

LiftMaster Fuse 15A

For VSL595 gate operator

EL1-SS

LiftMaster Telephone Entry System Stainless ** NLA

A Telephone Intercom and Access Control System which provides wired telephone intercom communication and secure access control at the gate or door.
Connects directly to the existing residential home phone line so no additional monthly expenses are incurred.
Stainless steel faceplate with black powder coated housing is attractive and tough.
200 (4-digit) unique programmable entry codes provide convenient assigned access.
Optional power supply transformer not included: K002B0821-1

Programming Instructions Instructions de programmation Sell Sheet

DXT-42

Linear 2-Btn 3-Channel Key Ring Transmitter *** Discontinued

Battery powered portable miniature transmitter designed for use with Linear’s DX Format receivers.
Each transmitter can be used in a limitless number of wireless remote control applications.
Pressing a transmitter button sends a digitally coded wireless signal to its companion receiver. The transmitter buttons have a positive click feel.
The digital DX code format features over a million possible codes.
The DX transmitters are precoded at the factory to unique codes so no field coding is required. Transmitters can send a signal for up to 10 seconds with each button activation.
Each button sends a unique code. Pressing both buttons together sends code three. Press button(s) for a minimum of two seconds to insure receiver activation.

.......more details

Installation Manual

MK00701

Micanan Smart 10.0 Full Feature Circuit Board Monitored with Heavy Duty Relays

For 1 HP 110/220V Single Phase 230/380/460V 3 Ph
The board has P1 & P2 terminals

Instructions Manual

MT-UHF-0-0

AWID Long Range Metal Mount Tag

For use with LR-2000 and LR-3000 readers
Operating temperatures from -58°F to 185°F (-50°C to +85°C)
Reading Distance up to 25 feet
Battery not needed passive tag
Passive RFID technology with excellent-price-to-performance ratio
Proprietary encryption for protection of card data

.......more details

M3A

Safety Inertia Brake 1" Bore 2283 Torque PCM3AP

Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
Fully resettable and reusable after lockout ocurrs.
Commonly paired with commercial safety bottom brackets in sectional door applications.
Fits 1" shaft
Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.

.......more details

IG2-EXT-MNT

Miller Edge Wall Mount Extension Bracket

1 ft L x 2" H x 3" W

27-48-180

Extension Spring 8' Door - 180 lbs Gold

Loop ends
27" long 48" stretch 180 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

16FT-TROLLEY-SET

LiftMaster 16ft Double Angle Rail Set for Comm. Trolley Ops 10-5816-P (2 pcs) *Actual length 227"*

Double Angle Rails for doors up to 16' high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
Actual Length 18' 11"

ME120-BLK-E-5FT

Miller Edge 2-Wire Black End Outlet 5 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

Installation Manual Sell Sheet

JRGX1

Chain Hoist Jack Shaft JRG V2 1" Shaft Torque Force (126689)

Jack Shaft Mounting plastic guide 4.5:1 reduction
Gear drive
Fits 3-3/8" minimum offset
Includes: 26' of galvanized hand chain - doors higher than 15' require additional hand chain
1 chain keeper
2 shaft collars

.......more details

Sell sheet

7550

Whiting Winding Cone for 2-5/8" ID Spring Wire Roadside (LH)

A Whiting original

SLT14-20

Rolling Steel 3" Flat Slat 20-ga Galvanized

YSG115-LED

Devanco Stop and Go Light Yellow Housing 115V LED

LED Traffic Light Red/Green Dock Light
Weather-proof 2 piece housing with highest available UV rating
Ultra bright LED's for easy viewing in direct sunlight
Lenses measure nearly 4" in diameter
Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied
Made in Canada

.......more details

Installation Instructions Instructions d'installation Sell Sheet

MOD034

Manaras Monitored Photocell Upgrade N1 to N4

Ideal for industrial environments submersible and impact resistant.
Flexible design withstands and realigns after mechanical impact.
Max. range 45ft.
Incl. photoeyes 3ft of conductor wire and mounting hardware.
Applies to all operator models with electronic control "M" types.

.343-6-RH-C

Torsion Spring .343 x 6" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .343 ID: 6" Length: 12 ft

.295-2-RH-C

Torsion Spring .295 x 2" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .295 ID: 2" Length: 12 ft

.234-2-5/8-RH-C

Torsion Spring .234 x 2-5/8" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .234 ID: 2-5/8" Length: 12 ft

44-60-240

Extension Spring 10' Door - 240 lbs Silver ** By Quote Only

Clipped ends
44" long 60" stretch 240 lb load

OSH-6533-CONT-R

Manaras Opera-SH 3/4 HP 600V 3 Ph with Mechanical Contactor Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual Sell Sheet

510.3021.00

Whiting Stainless Steel Exterior Hardware Package with #77 Lock for Dry Freight Door

Optional package when a door is ordered. Includes SS rivets and installation.

IRB-BR

EMX Industries Brackets for Photoeyes Sold as a Pair

Brackets are predrilled
Used for PC-3 P41 P44 P45 and IRB-4X photoeyes
Made of metal
Sold as a pair
9" x 3" L-Shaped

BK311

Jamb bracket J-11 #11 12 gauge

Sold by the piece
Height 4.75" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

BK305

Jamb bracket J-05 #5 12 gauge

Sold by the piece
Height 3.25" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

109B33

LiftMaster Trolley Belt Clip

SOLID_SHAFT_16'

Solid Shaft 1" Keyed 16 ft Galvanized

Actual length is approx. 16'-1"

SOLID_SHAFT_12'

Solid Shaft 1" Keyed 12 ft Galvanized

Actual length is approx. 12'-1"

YSG12-24LED

Devanco Stop and Go Light Yellow Housing 12-24V LED

LED Traffic Light Red/Green Dock Light
Weather-proof 2 piece housing with highest available UV rating
Wide input voltage range of 10-32V AC/DC eliminates the need to stock 12V and 24V models.
Ultra bright LED's for easy viewing in direct sunlight
Lenses measure nearly 4" in diameter
Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied

.......more details

Installation Instructions Instructions d'installation Sell Sheet

2200-030

Linear Limit Nut

Used on various Linear Gate operators

P219-1

Heddolf 1-Button Mini Transmitter 318MHz ** Available to Extent of Inventory

Open/Close mini remote for 1 door
8 dip switch
Allstar compatible

Programming Instructions

OGH-6434-ECB

Manaras 1 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

27024

Doorlec Electric Motor TEFC 3/4HP 115/230V DC403

ase mount

Wiring diagram for 120V Wiring diagram for 230V

OHJ-6213-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 240V 1 Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

Installation Manual Sell Sheet

T751L5

LiftMaster 3/4 HP 115/230V 1P Commercial Trolley Operator Logic 5 *** No Longer Available

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

OMH-6112-ECB-LH

Manaras Medium-Duty Jackshaft Op. 1/2 HP 120V with Elect. Circuit Board Left Hand

Designed for use on standard high and vertical lift sectional doors
Can also be used on small rolling doors and grills
Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
Mechanical brake
Hoist-a-matic self-engaging hoist for manual chain operation
Hoist on Right Hand is standard

.......more details

Installation manual Sell sheet

PPLK1-10

LiftMaster Passport Lite 1-Button Mini Remote with Sec+ 2.0 Technology 10/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Keychain remote control sold in a 10 pack

.......more details

Programming Instructions Instructions de programmation Sell Sheet Brochure

27021

Doorlec Electric Motor TEFC 1/2HP 115/230V DC201

Wiring diagram for 120V Wiring diagram for 230V

1005-1-3/4-8'

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4"

V1104-WHITE

Replacement Vinyl Only for 1104-White 200ft Roll

Sold in 200 ft rolls only

SS-1

Super Sneaky Low Headroom Top Bracket Sold as a Pair

Designed for use with low headroom standard lift automatic garage door installations
Eliminates the need for low headroom double track
Effective and easily doubled up for heavy commercial door applications
Replaces top fixture and uses existing roller
Zinc plated heavy guage metal
Sold as a pair

.......more details

34516R

Genie Chain Glide Inner Slide ML Series with Magnet

For ML Series with Magnet: 350ML 500ML 700ML 800ML

780

Fasteners Hex Head Bolt 3/8-16 x 1-1/2" 500/Box

3/8" bolt has 9/16" head
Max torque = 22
Full thread
Grade 5

37301R

Genie C-Channel Chain Extension Kit

The extension kit for C-channel chain drive garage door opener rails is to be used in addition to a 7' (3-piece) chain rail to accommodate an 8' high door

02-711

LiftMaster Nema 7/9 Ceiling Switch Pull Control

Single Pull Switch Control
Hazardous Area Overhead Mt. (NEMA 7/9)
Die cast hazardous area enclosure
May be used in two different ways; as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring). In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
WARNING: When used on most industrial operators this control will not stop the door. Use another control that has a STOP button in conjunction with this control.

.......more details

29-10338

LiftMaster Capacitor 70uf 230V 60Hz

For models: MJ5011 MH5011 HMJ5011 MT5011 and BMT5011

TR490

Waist-High Pedestrian Tripode Turnstile with Heater & Pictograms

The TR tripod turnstiles are very robust products that can function equally well inside and outside buildings.
They are particularly well-suited to the needs of access control at leisure centers stadiums and factories.
Well-built for increased durability tripod turnstiles efficiently control high throughput.
Bi-directional turnstile made especially for quick access control in areas with high traffic but limited space
Non-removable stainless steel arms to prevent vandalism
Durable corrosion-resistant heavy-duty mechanism for extended service life

.......more details