Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
K75-39337

LiftMaster Trolley Nut Kit LA500

  • The travel nut on LA500DC and LA500DCS gate operators may break when excessive force is applied to the gate such as being struck from a vehicle.
  • The travel nut can be identified as the white plastic nut that attaches to the internal lead screw of the arm.
  • The symptom of this problem is that the trolley assembly slides back and forth along the guide slots without mechanical restraint.
  • LiftMaster has created Trolley Service Kit K75-39337 with all the necessary parts and provides instructions on how to replace a damaged travel nut within an LA500 arm
Replacement instructionsInstructions de remplacement
ALUM-5P6

Aluminum 24" x 100' Spool Iron Ore / Minerai de Fer # 5P6

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 5P6
  • Reverse side is #431 Bright White
Colour chart
36645R

Genie Screw Drive Coupler

  • This coupler only works on the following models manufactured after June 2011.
  • TriloG 1200 (3064) TriloG 1500 (4064)
  • PowerMax 1200 (3062) PowerMax 1500 (4062)
  • GPower 900 (2564)
  • Powerlift 900 (2562)
25C20

LiftMaster Screw Drive Coupling K025C0020

41B0873

LiftMaster Safety Sensor Sunblocker Kit Works With 41A5034 and 041-0136

  • This complete kit is used to shield sunlight and prevent accidental reversal of garage door from sunlight shinning directly into the safety sensors
  • Works with 41A5034
  • Same as: 041B0873 41B873
ANGLE-13G

Perforated Angle 1-1/4" x 1-1/4" x 10 ft 13 g Orange

  • 10 pieces of 10ft per bundle.
02-103L

LiftMaster Push Button Station 3-btn Surface Mount O/C/S Nema 1 with Maintenance Alert LED

  • PBS-3
  • Open-Close-Stop
  • Momentary contact
  • Nema 1
  • Works with Liftmaster MH commercial operator
  • Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
    • .......more details
CP-LX600

Lynx Thru Beam Photocell N1 - Replaced by FR-1000 Fraba

  • Used on the UL325 operators
009145

Allstar Rear Idler Sprocket *** No Longer Available

  • Allstar Allister Rear Idler Sprocket new # 009145 replaces X145
  • for Allstar/Allister models including ARD-II A Access 200/250 Access 2000/2500 Access 3000/3500 PDQ and Allister Century Series 310/510/710
MK-00697

Micanan Fraba FOS-1 Exterior Thru-Beam Photocell Nema 4 / 4X 45ft Range

  • Exterior Through-Beam Photocell
  • Sensing Distance 45 Feet
  • UL325/2010 Recognized Component
  • Comes with Sender Receiver and Brackets
  • NEMA 4 & 4X
Installation manual
NIR-50

Emx Industries Retro Reflective Photoeye Sensor with Reflector (5250-2)

  • Extended range for better performance in rain and snow
  • Compact design mounting hardware and indicators make it easy to install
  • Lower current draw of only 28mA makes it an excellent choice for solar and low voltage applications
  • Watertight package and optional protective hood offers protection for the NIR-50 from the elements and vandalism
  • Flexible voltage 12 – 240 Volts DC 24 – 240 Volts AC
  • Watertight package for reliable outdoor installation
    • .......more details
90_9210MO

LiftMaster Auxiliary Limit Switch Mod M62 Open Factory Installed

  • Provides a limit switch for use by others to control auxiliary devices such as lights heaters dock levelers or other equipment.
  • The switch can be used to turn on or off such equipment when the door is fully opened or fully closed.
  • When ordering specify whether the auxiliary switch is required on the OPEN or CLOSE side of the control enclosure.
  • A maximum of 2 switches per operator can be supplied.
  • Each switch is SPDT (form C) and is rated 10 amps at 125/250 VAC
  • Wire leads are provided on field install kits
    • .......more details
BOARD070MR

Manaras Replacement Control Board (Monitoring)

  • On-board 390MHz radio receiver accepts 50 remote controls
Replacement ChartGuide de remplacement
IS40P

BEA Presence Sensor

  • Infrared presence sensor for use in industrial applications. The sendor utilizes 40 active infrared spots for reliable detection.
  • Ideal for use on automatic industrial doors vehicle gates/barriers and loading docks.
  • Equipped with 9 pre-programmed pattern configurations for various industrial applications.
  • Various learn time settings allow presence detection to either remain constant or ignore a motionless object after a pre-determined period of time.
  • Mounting height: 8-16'
  • Detection field: 10'x10' at max. mounting height of 16'
    • .......more details
Installation manualSell sheetCut sheet
M3A

Safety Inertia Brake 1" Bore 2283 Torque PCM3AP

  • Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
  • Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
  • Fully resettable and reusable after lockout ocurrs.
  • Commonly paired with commercial safety bottom brackets in sectional door applications.
  • Fits 1" shaft
  • Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.
    • .......more details
OTBH-6112-ECB

Manaras Trolley Operator 1/2HP 120V 1Ph with Electronic Circuit Board

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
Installation ManualSell Sheet
24851

Stanley Traveler Carrier Kit

  • Works with all Stanley chain drive units from 1992-present
  • Same as part no. 9200014
  • Trolley slider for part no. 49563
Installation InstructionsInstructions d'installation
CPS-OPEN4

LiftMaster Monitored Dual-Sided Photo Eyes

  • For use with sectional or rolling doors.
  • May be installed in areas exposed to rain or moisture
  • Rubberized for more durability
  • Will work on LiftMaster residential operators
Installation ManualManuel d'InstallationSell Sheet
25605R

Genie Inner Slide Kit for Chain Drive Models

  • The innerslide attaches to the chain and connects the carriage to the chain
  • Works on the following Genie and Overhead Door models:
  • IC250 PMX80 PMX500-IC/B IC250/B PMX85 ALC Series PMX60 PMX300-IC/A RCD Series PMX65 PMX500IC/A PMX75 PMX-IC/B
  • SP99 – SP SERIES LD100-500-100A-550A LAD125-555
  • CM6000-6000A-60-70-80-60S
  • OHD-696 696CD + Others
    • .......more details
27096A

Genie Drive Gear *** To Extent of Inventory

  • Gear for Genie Chain Glide PMX Series and PCG Series
  • 3-1/2 inch diameter nylon gear with square center hole
  • Square center hole is 7/16"
ACT-31B

Linear 1-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz (ACP00879)

  • Compatible with all Linear access receivers and controllers
  • Supplied with quick-disconnect key ring
  • Power: Two CR2016 batteries incl.
  • Codes: Factory block coded in MegaCode format
  • RF frequency: 318 MHz
  • Dimensions: 1.25" W x 2.25" H x .48" D
    • .......more details
Programming Instructions
50-107-30

Take-Up Reel 3-Wire Metal 30ft Extended

  • 3- wire 18-gauge
  • Also called Reel Cord
41K4629

LiftMaster CPS Interface Black Box (CPICARD)

  • Allows CPS-U photoeyes to provide a 'NO' contact
  • Interface is included with CPS & CPS-N4
  • Also known as 041K4629 1C4489 41K4629 41C4489 CPI
41C4398A

LiftMaster RPM Sensor Kit

  • RPM sensor assembly 1986 - present
Installation Manual_bilingual
LYNX-WALLSTATON

Lynx Deluxe 3 function Wall Station

  • Features light and lock function
  • Vacation switch de-activates remote controls & keyless entry
  • Works with Lynx residential openers built from 2000 +
  • Comes with wire and mounting hardware
Installation instructions
RA-LYNX-RCVR

Lynx External Receiver

  • Add to most operator systems
  • Use with either residential or commercial applications
  • Unlimited transmitter capacity
Programming instructionsCompatibility chart
SOLENOID004

Manaras 575V Brake Solenoid

  • Same as 22-575
  • Fits on all 575V garage door or gate operator brake system.
298601

Linear Wireless Multi-Code Keypad 310 MHz

  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • 4-digit access code
  • Backlit keys
  • Easy access to battery
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
    • .......more details
Installation Manual
308913

Linear 1-Channel Multi-Code Visor Transmitter 310 MHz

  • Open/Close remote for 1 door
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
Z9003

Pusher Spring - 27" Sold as a Pair

  • Pusher spring 27" long with 15" travel. Sold as a pair
E/1929/025

Automatic Systems Bumper and Limit Switch Ass'y (BL229)

  • Used on the BL229 gate op.
WD-8300

Wayne Dalton Classic Steel Garage Door ** By Quote Only

  • Heavy-gauge steel and a thick layer of insulation provides a smooth dependable operation that excels in appearance and strength.
  • R-VALUE: 12.12 / 16.12
  • WD's best-insulated residential garage doors feature two layers of steel surrounding a thick layer of foamed-in-place polyurethane insulation.
GTO-R4222

Nortek Mighty Mule Photo Beams 12V Pair

  • For Mighty Mule swing and slide gate openers
Manual
LA500CONTUL

LiftMaster Standard 24VDC Control Box for Single and Dual Gate Applications Batteries Incl. UL325

  • Complete control box for new LA500U 2018 UL325 compliant
  • Includes box control board and batteries.
HDSL24UL

Liftmaster Heavy-Duty Variable Speed Slide Gate Op. 24VDC for Heavy Gates.

  • 1.5 HP Variable Speed Slide Gate operator for gates up to 75' and 3000lbs
  • Battery backup provides up to 45 cycles or 120 days of standby power
  • Smooth Start/Stop with variable travel speed of .5ft/sec to 1ft/ second.
  • 120/240 input voltage optional 3 phase converter for 208/240/460/575
  • On-Board Secutiry+ 2.0® Receiver accepts (50x) 8 series remotes or unlimited 811 remotes.
  • Includes LMRRUL Monitored Retroreflective Photo Eye with intergral heater
    • .......more details
HDSL24UL - Installation ManualHDSL24UL Manuel DInstallationProduct Guide (EN)Guide du Produit (FR)
236515

Wayne Dalton Res. Bottom Bracket Roller Holder LH

  • Compatible with Wayne Dalton 9100 9400 9600 9800 Foamcore II garage door models.
  • Pins & Cotters Included
  • Top quality galvanized steel
  • Dimensions: 4" Wide x 1.25" High x 1" side flange with milford pin
  • Sold as a single unit
LA400PKGUL

LiftMaster Residential 24V DC Swing Gate Operator All-In-One UL325

  • LED DIAGNOSTIC DISPLAY Simplifies installation and troubleshooting.
  • WIRELESS DUAL-GATE COMMUNICATION Eliminates expensive conduit costs and unsightly driveway scars.
  • BI-PART DELAY Monitors and adjusts speed and position of each wing to ensure primary gate closes last.
  • SYNCHRONIZED CLOSE Simultaneously closes gates. WITH OPTIONAL EXPANSION BOARD
  • PROGRAMMABLE AUXILIARY RELAYS Easily add additional features such as warning lights/alarms.
  • ANTI-TAILGATE Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up gate will continue to close.
    • .......more details
Installation manualManuel d'installationData sheet
050DCJCWFSD

LiftMaster Receiver Logic Board DC. WiFi CJO Sectional for LJ8900W

  • 050DCJCWFSD is a 315MHz Security+ 2.0® Receiver Logic Board featuring Wi-Fi® with myQ® technology.
  • For use with various LiftMaster® Light-Duty Series Jackshaft Door Operators for sectional doors; manufactured after 2018.
  • The unit will feature a yellow learn button.
DW-TR-200

Fraba Wireless Air Wave Switch Transmitter Only

  • Includes transmitter DWTR-200 433 Mhz only
  • A small radio transmitter and the pneumatic switch are packaged within the DW3S-200 case does not come with copper end
  • Comes with battery (CR2)
Operating Instructions
Z9202

E-Z Ratch Kit Torsion Spring Winding System ** No Longer Available

  • Kit includes:
  • Two (2) - 21" Extendable Ratchet Handles (extend to a full 30" in length)
  • All-purpose commercial cone Gear Adapter (double-ended)
  • Six (6) Cone Adapter Pins One (1) 7/16" One (1) 1/2" Two (2) 5/8" Two (2) 3/4"
  • Mounting arm spacing allows it to be coupled to spring cone sizes up to 4 3/4" diameter
  • Compatible with 1” main torsion bar installations
    • .......more details
Operating instructions
E3K-2018

Omron Retro-Reflective Photocell w/Built-In 10K Resistor UL325-2018 *Same as model E3K-R10K4-NR-1

  • Fully complies with UL325-2018 standard for gate ops. that use the 10K resistor method and also the Normally Closed method
  • Easy to wire terminal strip
  • Plug-in replaceable outputs
  • Range: 40ft
  • Power: 24-240V AC/DC
  • The E3K-2018 has a second relay to accommodate traditional dry contact for non-monitored applications.
    • .......more details
Wiring DiagramsSell sheet
STRUT-3-18'

Door Strut 3" Hemmed 18ft Long

  • Reinforcement bar 3"
39438R

Genie Garage Door Opener LED Bulb LEDB1-R 1/Pkg

  • Unlike other LED and CFL bulbs this bulb will reduce or eliminate radio frequency interference
  • Uses 10 watts but equivalent to a 60-watt bulb
  • Works with almost all garage door openers
  • Lasts up to 25000 hours
  • Shatter-resistant vibration-resistant
  • Cold weather rated up to -30C
    • .......more details
BELT-GEAR

Skylink Belt Gear for EQ Operators 210131 ***NLA

  • New model # 210131 no cover is needed
  • Metal Gear
GL-24-LED

Guide Lights for Loading Docks Amber LED 12-24VAC/DC 24-3/8" long Sold Individually

  • LED lights offer long-lasting reliable high-visibility in all weather conditions including direct sunlight with low power consumption.
  • Robust housing resists impact and corrosion.
  • Slim discrete design ensures little risk of damage due to accidental impact.
  • Wide input voltage range of 12-24Vac/dc (control box available for alternate voltages).
  • Boards coated in water-resistant polymer for optimal protection from water and humidity.
  • 24 LEDs per guide light
    • .......more details
27-24301

Truck Door Single Torsion Spring Assembly 89.5/48 for Todco Roll-Up Doors

  • Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
  • Shaft Length: 89.50" Spring Length: 48" Wire Size: .243
  • Right hand wound
  • Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
  • Springs treated with rust preventative
  • Heavy .243 dia. spring wire
    • .......more details
MK00643

Micanan Auxiliary Apt. Circuit Board for Red/Green Light Feature 115V Models Field Install

  • Auxiliary device logic board
  • Controls red/green lights
  • Provides Normally Open dry contacts for fully open or close positions
  • Normally Open dry conatcs for door opening or door closing cycle
  • Works on circuit boards: MK00641 MK00642 MK00701
  • Includes installation hardware
    • .......more details
Instructions Manual
LA400DC-S

LiftMaster Residential 24VDC Linear Actuator Secondary Arm Only New Model

  • Secondary Arm Only for LA400
  • All new arms are backwards compatible with the previous model but the LiftMaster branding is different
Installation ManualManuel d'InstallationSell Sheet
8030196

Marantec Belt Connector Kit

  • Works for all Marantec Belt Drive Openers
  • For models: Mac Lift M4500M4700Q7500Q7700 M4500e M4700e
  • Includes two connector pieces and four screws
  • Not for use on the heavy duty rails used by Q7900 & M4900e
17330

Doorlec DC-3100R 3-Channel O/C/S Receiver 301 MHz

  • Range of approx. 175ft (53.34m)
  • 8 dip-switches for programming
  • 24/120V selectable
  • Made from polycarbonate plastic for rugged and weatherproof use
  • Includes a built-in antenna to eliminate interference and provide continuous reception
  • A plug-in wiring harness is provided to facilitate interconnection between power supply of operator and receiver
    • .......more details
Q029

LiftMaster Limit Switch for Elite Gate Operators (K23-50099)

  • Sold individually
  • For Elite Miracle-One arm SL3000 CSW200 and robo slide and robo swing gate operators.
  • Same as part no. K23-50099
SOLID_SHAFT_18'

Solid Shaft 1" Keyed 18 ft Galvanized

  • Actual length is approx. 18'-1"
109099

LiftMaster Flat Wall Plate Mounting Bracket

  • Heavy 1/4" steel plate bracket used for wall mounting of side-mount operators.
  • Slots in back allow for tensioning of drive chain.
  • Mouting studs match up with mounting holes of LiftMaster Models DJ DH J MGJ H and GH operators.
29-NP712

Lead Acid Battery 12V 7A

T-833-C

FL-Allstar 3-btn 9-Door Transmitter 109023-311 MHz***NLA

  • This nine channel transmitter controls up to nine doors (open-close) or three doors (open-close-stop).
  • It has a height switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 8833TC (190-109023)
  • Dimensions: 4 5/8" x 2 1/4" x 7/8"
Programming Instructions
41A5021-I

LiftMaster Electronic Circuit Board Assembly ** Discontinued. No Stock Left

  • Assembly includes: Logic board end panel and light socket
  • For chain drive models with 2-lights
  • Fits 1265 Security + 390MHz
  • Also known as; 41A5021 41A5021-B 41A5021-C 41A5021-D 41A5021-E 41A5021-F 41A5021-G 41A5021-H
SPREADER001

Chain Tensioner for 1" shafts

  • Chain spreader for installation with 1" operator shaft & 1" door shaft.
  • Includes 2 shaft collars and set screws.
  • Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing
Installation instructions
RADIO-27

Manaras MT-1000 1-btn transmitter 313 MHz ** Replaced by RADIO-EM901 or RADIO-EM903

  • Open/Close remote for 1 door
  • Comes with LED battery life indicator
  • 9V battery included
  • Sunvisor clip included
  • Alternate part number: MN-100TI-A
Programming Instructions
MCT-11

Linear 1-btn MegaCode Transmitter 318 MHz

  • Activates one 318 MHz MegaCode receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Two CR2032 batteries included
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 3" W x 1.875" H x .625" D
    • .......more details
Programming Instructions
MOTOR189

Manaras Electric Motor 1/2HP 120V 1PH

  • Instant reverse
  • Medium-duty 1050 rpm
  • For OMT MLJ MLH MLT
041D0605-5

LiftMaster Electric Motor Kit Only DC

  • Also known as: 41D475-1 062525 41D605-5 041D0605
  • DC Motor Replacement Kit.
  • For use with various LiftMaster® Belt Drive Garage Door Openers; manufactured 2001 to 2005. The unit will feature a red/orange learn button.
EXT-HDWR-BOX-7/8

Installation Box for Extension Springs for 7' & 8' Doors

  • Installation Hardware includes 3" sheaves sheave strap cables safety cable fasteners
REEL-20

Devanco Take-Up Reel 2-Wire Metal 18-ga 20ft Black

  • 18-gauge
  • 20 ft extended
  • Take up reels are NOT recommended for use with any failsafe type edge. Use coil cord only.
  • Also called Reel cord
  • Comes with reset button for CSA conformity
150BL

1-1/2" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Box quantity 50 pcs
SA1929/A19

Automatic Systems Retrofit Logic Board with Drive for BL229 Board and Double Channel Loop Detector

  • Retrofit Assembly for the BL229 board this includes the new logic board with the drive.
  • Comes with E/BLOP/371 which are the loop detectors that go with that board. (no cost for the moment)
WD-309961

Wayne Dalton Wired Wall Station 372Mhz 3976

  • 2 Buttons
  • Color: Cream
  • Dimensions: 2-1/4"" x 4""
  • Works with Wayne-Dalton Models: Classic Drive: 3014 3018 3018DLX 3514 3522 3522DLX; Quantum: 3214 3314 3316 3414; Prodrive: 3220C 3221C 3222C 3224C 3320B 3322B 3324B
T-831

FL-Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 311 MHz 107483

  • Open/Close/Stop stationary remote for 1 door.
  • Designed for commercial automatic door and gate operator applications.
  • This transmitter can operate a single receiver connected to one operator
  • Compatible with 3-channel Allstar and MVP receivers
  • Easy access to battery and coding switch
  • Power: 9-volt battery
    • .......more details
02-410

LiftMaster Commercial Key Control Station Open-Close and Off with Stop Button

  • Outdoor Surface Mount Nema 4/12 station
  • Standard key cylinder
  • Open/Close spring return to center (off)
  • Key removable in center position only
  • With Stop button
MV-00237

Micanan Key Switch O/C/S Btn Tamper Proof w/Best Core Cylinder Nema 4 Surface Mount

TRACK-GUARD-60

Track Guard 60" Tall Safety Yellow With Base Sold as a Pair

  • Provides impact protection to vertical track
  • 45° angle flange adds strength protects from side impact.
  • 7-gauge steel construction powder coated safety yellow for high visibility.
  • 1/4” foot plate drilled with slotted holes for three 1/2” anchors.
  • Wall flange drilled with slotted holes for four 3/8” anchors
  • Includes: (right) and (left) sides
    • .......more details
WB-300

Skylink Multi-Function Wall Console ***For Old EQ Models

  • For use with the Skylink garage door openers.
  • Oversized Push Button for activating the garage door opener.
  • Activate opener light on/off and the light will remain on until the button is pressed again.
  • Feature with Lock function to ignore all radio signals for added security.
  • Illuminated LED indication.
  • Easy to Install.
    • .......more details
220315

Allstar Challenger Gear & Sprocket with Bushing

98875

Marantec Shark Tooth Position Reference Tab Chain Rail

  • For chain rails.
  • This part is installed inside rail on the actual chain.
  • This part works with the reference switch to determine the open & close limits of the garage door.
  • Reference switch part # 104083
JDMG-HOIST

GDI Axial Chain Hoist Kit Nema 4 for JDMG-LG

  • Can be added in the field
Sell sheet
.187-2-R

Cut-to-Length Torsion Spring .187 x 2" Right Hand Wound

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
MK-00648

Micanan 1-Channel 24V Receiver with Antenna

  • Comes with antenna MK00719
  • Total of 20 regular remotes can be programmed or 200 of the block coded remotes MK-00660
Programming Instructions
821LM

LiftMaster MyQ Garage Universal Smartphone Garage Door Controller

  • Enables smartphone control of most major brands of garage door opener with photoeyes.
  • Includes Wi-Fi hub and door sensor
Installation ManualManuel d'InstallationSell SheetBrochure
71-B240

LiftMaster Interior Mount Brake Assembly 230-460V

  • Assembly includes: Brake Hub Kit Brake Release Lever Brake Disk Spring Cup Studs Compression Springs Brake Solenoid Solenoid Cover Spacers Mounting Plate Pressure Plate Feather Key Conduit.
  • Works on LiftMaster trolley garage door openers
Instruction Manual
STRIP_CURTAIN

Complete PVC Strip Curtains Made to Order

  • Please call us for price and delivery we can supply complete doors and replacement PVC strips for existing installations. Many different sizes and colors are available
FL-KEYPAD

FL-Allstar Wireless Keypad 110927-311 MHz

  • This wireless keypad controls up to four doors.
  • Manufacturer's model number: (190-110927)
  • Dimensions: 6" x 2 3/8" x 1 1/4".
Programming Instructions
MK00641

Micanan Smart 10.0 Full Feature Circuit Board Monitored with 5 Relays

  • For 1/3 1/2 and 3/4 Hp - 110/220V 1p 230V 3p
  • Board has P1 & P2 terminals
  • Up to 20 transmitters can be programmed
Instructions Manual
LYNX-RCVR-OCS

Lynx O/C/S Receiver

  • For use with Lynx o/c/s transmitter # T3B-OCS
Compatibility chart
ACT-34B

Linear 4-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Supplied with quick-disconnect key ring
  • Power: Two CR2016 batteries incl.
  • Codes: Factory block coded in MegaCode format
  • RF frequency: 318 MHz
  • Dimensions: 1.25" W x 2.25" H x .48" D
    • .......more details
Programming Instructions
1336.8

Whiting Stainless Steel Roadside Top Closure Bracket for 8" radius

1005-1-3/4-24'

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4"
DM4X8

Cable Drum Standard Lift 8' 400-8 Pair

  • 8' Standard Lift aluminum die cast alloy.
  • Pair includes: (1) LH and (1) RH Color coded: Red=LH and Black=RH
  • Max. Door Height: 8'-1".
  • Rated Lift per Drum: 265 lbs
  • Max. Cable Diameter: 1/8"
  • Mounting: 1" tube or solid shaft with 1/4" keyway
    • .......more details
ULT-MVP-2-D-TEK

EMX Industries Multi-Voltage Loop Detector 2-Channel (ULT-MVP-2U)

  • Combines small size with 9VDC to 240VAC input range.
  • Size: 73 x 38 x 78mm
  • ULTRAMETER™ display indicates the appropriate sensitivity setting the vehicle positioned on the loop
  • Ten (10) sensitivity adjustments
  • Four (4) frequency settings
  • Automatic sensitivity boost (ASB) delay fail-safe/fail-secure and infinite or normal (5 min.) presence
    • .......more details
SELWR433

Erone Wiegand Receiver 433 MHz

  • 26 bit
  • 12-24V AC/DC input voltage
Wireless System Chart
BARL-1003-158-18

Elton Bottom Aluminum Retainer Fits 1-5/8" Doors Brush/Seal Channels 18ft Long

  • Aluminum bottom retainer that integrates a 45-degree brush seal channel combining two essential commercial door seals into one robust solution
  • Compatible with V1003 bottom rubber 3" to 6.5"
  • Integrated 45 degree angle retainer for our RL brush seals
  • Brush seal deters rodents
  • Available in 18 foot lengths easily customizable to desired length
  • Available for Garage Door Thickness: 1 5/8"
    • .......more details
JHDC22X1BMC

LiftMaster MAXUM Jackshaft 1.5 HP Heavy Duty 120/240V 1PH 60 Cycles/Hour 2200LB

  • New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
  • Drive Type 65:1 Gearbox with #50 Chain Output
  • Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls
    • .......more details
LEDSTRIP004

LED Light Strip (1 Unit) Red/Green/Blue 96" 24VDC

  • An auxiliary output module is required enables connection of 24VDC LED light strips. MODKIT168A is an option
Installation Manual
BEA-10-IXIO-ST

BEA Presence Sensor for Automatic Sliding Doors

  • IXIO-ST is an effective versatile and easy-to-use presence sensor for automatic sliding doors.
  • It can be used for both clear door openings and side-lite protection
  • Precise infrared curtains coupled with visible alignment beams make the IXIO-ST extremely safe and easy to adjust.
  • This state-of-the-art sensor features an on-board LCD screen that streamlines the installation and setup processes.
  • Intelligent Solution :On board microprocessor optimizes data analysis monitors sensor performance and enables system integration
  • Mounting height: 6’6” – 11’6”
    • .......more details
MYQ-SGC2WLM

LiftMaster Smart Garage Camera ***To Extent of Inventory

  • The LiftMaster Smart Garage Camera™ is compatible with all myQ connected garage door openers.
  • It works directly with all LiftMaster openers with the Wi-Fi logo and can work with most garage door opener brands manufactured after 1993 when paired with the myQ Smart Garage™ Hub(821LMB).
  • myQ Connected: monitor the garage through a live feed or recorded event using the myQ app.
  • Video camera begins recording when motion is detected.
  • Easy setup with Bluetooth and magnetic mounting base.
  • Enables secure in-garage delivery for Amazon Prime packages
    • .......more details
29-NP812

Lead Acid Battery 12V 8A

  • Also known as: 29NP0812 K29-NP08-12 29-NP08-12
210-0057

TNR Doors CurtainLok Kit HDXL9 5/Kit (10 pcs) ** Price by Quote Only

  • Natural UHMW-PE 5 Lok's
  • Sold as a kit of (5) complete loks that require 2 curtain loks and 2 screw (10) of each piece for 5 loks
10RD433

BEA Digital Receiver 433 MHz

  • Receiver with integral sequencing "learn" buttons (for vestibule sequencing) pulse/toggle functionality and additional hold time.
  • Operating temperature: -10 to 55C
  • 12-24V AC/DC
  • Max No. of Programmed Units Per Receiver: 100 Transmitters
CAPXLV

LiftMaster Smart Video Intercom - L

  • LiftMaster’s cloud-based video intercom for multi-tenant residential properties.
  • The intercom allows residents to see their visitors through live video and grants access to the building via the MyQ app
  • Display and interface – 10” color display with touchscreen
  • Connectivity – WiFi cellular wired high-speed DSL
  • Audio capabilities – Voice over IP – digital call quality with no long-distance charges
  • Video capabilities – One-way video calling with a 135-degree view
    • .......more details
89493

Marantec RPM Sensor with Wire Harness

  • For use on M-line/Q-line/EOS models
4580-304-BLACK

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Black *** To Extent of Inventory

  • 304ml cartridge
  • Ideal for movement and perimeters joints
  • Meets ASTM C920 S NS Class 50 NT M GA O
  • Meets AAMA 802 and 805 standards
  • Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
  • Excellent resistance to UVs for indoor and outdoor use
    • .......more details
MK00651

Micanan Interface Module