Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
OPJ-6433-M-N1

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 480V 3 Ph Monitored ECB w/N1 Photoeyes

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
BCSI-PM20

Pivin Drapeau Sprocket 50B12 *** Price by Quote Only

SHAFT048

Manaras Trolley Output Shaft

D-TEK-LP

EMX Industries Low Voltage 11-Pin Single Channel - Dual Relay Loop Detector (2500-1)

  • Power Supply: 12-24 Volts AC/DC
  • Current Consumption: < 9 mA
  • Operating Temp: -40°F to 180°F
  • Surge Protection: Zener Diode /MOV
  • Output Relays (2): 1Amp 30 VDC
  • Loop Input: Transformer isolation lightning and transient protection (1)
    • .......more details
Manual - LP-D-TEKSpec Sheet - LP-D-TEK
SHAKER-XL-R16

Garex Ready to Install Door Special Order

  • Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)
  • Panel Height: 18 21 and 24 inches (45 53 and 60 cm)
  • Panel Width: Up to 24 feet (732 m)
  • Texture: Woodgrain
  • Offered in various choices of colours
SHAKER-R16

Garex Ready to Install Door Special Order

  • Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)
  • Panel Height: 18 21 and 24 inches (45 53 and 60 cm)
  • Panel Width: Up to 24 feet (732 m)
  • Texture: Woodgrain
  • Offered in various choices of colours
MGH-6534-M-N1-RH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
29140

Doorlec Transformer 230V pr 120V sec 50VA

  • 230V primary 120V secondary 50VA
GALV-331-334-R

Cut-to-Length Torsion Spring .331 x 3-3/4" Right Hand Wound Galvanized Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-306-258-L

Cut-to-Length Torsion Spring .306 x 2-5/8" Left Hand Wound Galvanized Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-243-334-R

Cut-to-Length Torsion Spring .243 x 3-3/4" Right Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-334-INSTALLED
GALV-243-334-L

Cut-to-Length Torsion Spring .243 x 3-3/4" Left Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-334-INSTALLED
MWT12B

Miller Edge Transmitter Binary Nema 4 Enclosure

  • The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
  • Response time: 70 milliseconds
    • .......more details
Installation Instructions MWT12BSpec Sheet MWT12BFAQ MWT12B
DOCK-SEAL-R600

Dock Seal R-600 Adjustable Curtain Seal Price by Quote Only

  • Made to order - Price varies according to specifics
  • This model is ideal for door openings of 8′ wide x 10′ high
  • Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
  • 40 Oz Vinyl
  • Comes with full height yellow guide strips and option for wear flaps
  • Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time
    • .......more details
R-600 Order FormCatalogueInstallation Instructions
42GRR-9002

Allen Bradley Series 9000 Photoelectric Sensor Thru-Beam Receiver Unit

  • nput: 70-264VDC/AC
BL229-EX1929-D45

Automatic Systems Rising Barrier Gate with 14'9" Round Arm Right Hand

K41-0383-000

LiftMaster Toroidal Transformer 1200lb / 120VAC-240VAC

  • For Maxum ops
K41-0391-000

LiftMaster EMI Board 1200 (120VAC/240VAC)

  • For Maxum op
GT103L5

LiftMaster Heavy Industrial-Duty Trolley Op. 1 HP 208/230/460VAC 3PH

  • Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
  • GT operators are directly attached to drive and control the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
  • High-starting torque continuous duty motor with overload protection
  • Door speed approx. 11-12 inches per second
    • .......more details
19-40ML-SS

Master Link #40 Stainless Steel

  • For #40 chain
GX-200-MG

Garex Ready to Install Door Multi-Grooved Special Order

  • 21" panel = 4 grooves 24" panel= 5 grooves
  • COMPLETE JOINT SEAL No air circulation between the panel sections eliminating thermal bridges.
  • Minimize the heat transfer between the inside and outside of your garage.
  • LIGHTWEIGHT AND ROBUST PANEL Polyurethane foam insulation pressure injected between the interior/exterior faces
  • WOOD END BLOCKS Suitable to receive steel end caps
  • HIGH-PERFORMANCE DESIGN Flexible rubber inserted into a PVC reinforced moulding offering a tightly sealed fit to the floor
    • .......more details
SCREW002

Manaras 1/4"-28 x 1/4" Set Screw

BEARING048

Manaras Flange 2-Bolt Flange Bearing ID 3/4" Black

  • Replaces BEARING044
GALEOW

Erone 26-bit Wiegand Backlit Keypad

  • Compatible with ATRIUM CENTAUR and any 26-bit Wiegand system
  • Heavy-duty Zamak® cast alloy
  • Indoor/outdoor application
  • Blue backlit keypad
  • Weather resistant and vandal proof
  • PIN code: 4 to 8 digits
    • .......more details
Wireless System Chart
A22K

Erone Krypto 2-Door IP Controller

  • The ATRIUM A22K two door IP controller works perfectly with the most popular Wiegand card readers or with the embedded KRYPTO high-security solution providing the best of both worlds in access control.
  • KRYPTO is the easiest solution to manage DESFire® EV2/EV3 smart credentials on the market making worries of card cloning a thing of the past.
  • The auto restore of encryption keys upon power failure ensures an effortless system start up and management.
  • Additionally the A22K can easily be converted to an Elevator Controller (A22KEC) Schlage Door Handle Controller (ADH2K) or Aperio Door Handle Controller (A2PK) as needed.
  • Controls 2 doors / 4 readers (entry/exit per reader port)
  • Add more A22Ks to expand your system up to 500 doors
    • .......more details
Wireless System Chart
E/1907/012

BLG76 Backup Spring Assembly

E/0172/166

Automatic Systems Spring Assembly

10TD900TR

Transmitter 900mhz Touchless Wireless Converter

  • Allows wireless door activation without the need to run additional wires to easily change existing door configurations from hardwired push plates to touchless door actuators.
  • Microwave doppler technology allows for consistent and reliable detection.
  • For automatic door apllications.
  • Compatible with 10RD900 and 10BR2900 receivers.
  • IP65
  • Nema 4
    • .......more details
E14400M

Cable Tie KSPEC 40 LB Black 14" Nylon 1000/pkg

  • Length: 14" Width: 3.6MM (0.140")
  • Low insertion and pull through force
  • Advanced pawl and teeth design
  • Angled tail provides quicker initial insertion alignment
  • Tail finger grips allow easier handling and tightening
  • Rounded edges provide added safety and eliminate insulation damage
    • .......more details
50018

Doorlec Photo Switch Polarized Explosion Proof Reflective w/Round Reflector

  • Class 1 Div 1 Groupes CDEFG explosion proof Certified CSA
MD00128

Micanan #410 Roller Chain 27 Pitch c/w Connecting Link

15-50B72QGH

Sprocket 72 Teeth 1-1/4" Bore 1/4" Keyway

  • For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators
5-38-10

2" Horizontal Track Set 8'6" (7ft Door) 10" Radius 16ga 2-pcs

  • Left/Right hand horizontal track set 10" radius
  • Garage Door Residential usage
CGH155L5-RH

LiftMaster Gearhead with Carwash Mod and Brake 1-1/2 HP 575V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
RENO-BX4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector

  • The Model BX is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
  • Eight detection sensitivity levels are selectable by means of a front panel mounted rotary switch external dip switches
  • Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep
Installation Manual Sell Sheet
OPH-6532-M-N1-LH

Manaras Opera-H 1/2HP 600V 3Ph Monitored ECB and N1 Photoeyes Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
2110-236

Linear Shaft Output Assy HSLG Ups

MQ00002

Micanan Cotter Pin 1/8" x 2.5" Long

Q521

LiftMaster Wiring Harness Kit CSW-DM K94-50287

  • Compatible with LiftMaster® Model CSW200UL Swing Gate Operators
  • Also known as: 94-50287 K94-50287
19-50HL-SS

Half (Offset) Link #50 Stainless Steel

  • For #50 chain
OPH-6214-M-N1-RH

Manaras Opera-H 1 HP 240V 1Ph with Monitored Board and N1 Photoeyes

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
K001A6407-1

LiftMaster Logic Board Absolute Encoder

  • Compatible with LiftMaster® Models RSW12V and RSW12VH Swing Gate Operators
K41-0083-000

LiftMaster Bridge Rectifier HD Gates

  • For use with various LiftMaster® Heavy Duty Commercial Slide and Swing Gate Operators (HDSL24UL & HDSW24UL)
OSH-6214-M-N1-RH

Manaras Opera-SH 1 HP 240V 1 Ph Monitored w/N1 Eyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
178B45

LiftMaster Curved Door Arm (K10-10203)

  • Also known as: 1010203 105004 10-10203 K10-10203
  • For use with various LiftMaster® Medium Duty Commercial Door Operators
SB3381-PAIR

Garex End Bearing Plate 3-3/8" - 1" Commercial Sold as a Pair

TDC1222-14

Liftmaster Comm. 14FT Trolley Angle set (10-5814-P x 2) and #41 chain pack (TDC41-14) ***Actual length 203"***

  • Double Angle Rails for doors up to 14'6" high
  • Includes #41 chain pack
TDC7-12

Liftmaster Comm. 12FT Trolley Angle set (10-5812-P x 2) and #48 chain pack (TDC48-12) ***Actual length 179"***

  • Double Angle Rails for doors up to 12'6" high
  • Includes #48 chain pack
TDC7-8

Liftmaster Comm. 8FT Trolley Angle set (10-5808-P x 2) and #48 chain pack (TDC48-08) ***Actual length 131*

  • Double Angle Rails for doors up to 8'6" high
  • Includes #48 chain pack
K177A0112

LiftMaster Trolley Spring

  • Also known as: 177A112 62274 177A0112 062274 132C2180 177A78
GALV-295-6-144-R

Torsion Spring .295 x 6" x 12ft RH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
OTBHW-6112-AM06

Manaras Apt-Style Trolley Op w/Carwash Mod 1/2HP 120V 1Ph Monitored w/N4 Eyes Silencio

  • The Silencio operators have integrated noise reducing enhancements which make it 4X QUIETER than the Premium Trolley Apartment model (OTBH-A.05).
  • A low headroom apartment type garage door operator designed for use on industrial standard lift sectional doors with high cycling daily frequency requirements
  • Mounting (Low Headroom Design): Ceiling-mounted with only 6.25" headroom clearance required below the tracks. For indoor use only.
  • Dimensions: Back Room: door height + 4'5" (1350 mm)
  • Head Room For Tracks: 5.625" (143 mm) above the highest point of door travel
  • Comes with carwash modification and tracks/chain for doors up to 12ft
    • .......more details
5M-NICE-BAR-ASBY

NICE Replacement Bar Assembly for M5BAR Barrier Gate

  • Bar assembly comes with:
  • XBA5
  • XBA13 -- RUBBER IMPACT PROTECTION STRIP
  • WA10 -- RED ADHESIVE REFLECTIVE STRIPS
  • SPGAP06400A – NYLON INSERT KIT
  • PD1614B0000
    • .......more details
JDC7S1BMC

LiftMaster MAXUM Jackshaft DC Commercial Op. w/BBU 700LB

  • Max door height: 40 ft. Max. Sectional doors up to 700 lbs. Rolling steel or insulated doors up to 450 lbs.
  • myQ Compatibility: Setup available for either myQ or myQ Facility
  • Operating Temperature: Without Heater: -4°F (-20°C) – 140°F (60°C). With Heater: -40°F (-40°C) – 140°F (60°C)
  • Heater sold seperately
  • Voltage: 120V/240V (1PH/3PH); 480V (3PH); 208V & 600V (3PH) available with transformer accessory
  • Motor Power: 24VDC
    • .......more details
JDC7S1BMC_Installation-manualJDC7S1BMC_Manuel-installationData sheetFiche TechniqueQuick connect guideGuide de connexion rapideOrdering guideSprocket recommendation
GALV-343-258-144-L

Torsion Spring .343 x 2-5/8" x 12ft LH Galvanized Blue/Red

  • Wire size: .343
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-319-334-144-L

Torsion Spring .319 x 3-3/4" x 12ft LH Galvanized Blue/Green

  • Wire size: .319
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-306-334-144-R

Torsion Spring .306 x 3-3/4" x 12ft RH Galvanized Red

  • Wire size: .306
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-306-334-144-L

Torsion Spring .306 x 3-3/4" x 12ft LH Galvanized Red

  • Wire size: .306
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-258-144-R

Torsion Spring .250 x 2-5/8" x 12ft RH Galvanized Green

  • Wire size: .250
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-2-144-R

Torsion Spring .250 x 2" x 12ft RH Galvanized Green

  • Wire size: .250
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
OMJ-6112-M-N1-RH

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Monitored Circuit Board N1 Eyes Right Hand

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
GD-STEND-24D-2

End Cap Steel 16G 24" Double 2" Thickness

  • Galvanized Steel 16-ga (1.42mm) thick.
11.7135

Whiting Horizontal Track 2" x 135" L 6" Radius Roadside 1 Piece

  • 1 roadside horizontal track
11.6135

Whiting Horizontal Track 2" x 135" L 6" Radius Curbside 1 Piece

  • 1 curbside horizontal track
K41-0156-000

LiftMaster Cable Tension Monitor Left Side

  • For use with various LiftMaster® MAXUM Series DC 700 lbs. to 2200 lbs. Standard-Duty and Extended-Duty Jackshaft Jackshaft Hoist and Trolley Commercial Door Operators
  • This service kit is compatible with the following MAXUM models: JDC JHDC and TDC.
  • NOTE: Refer to K41-0157-000 for Right-Side Cable Tension Monitor
HRD-288-1

EMX Universal Mounting Bracket L-Shape Black Sold per Piece

  • Fits RET2 MON2 4X2 WEL-RX REFLECTOR-O-EX models
XF208VAC12

LiftMaster 208V Transformer Kit 1200

12-1009

PVC Strip 6" x .060 Standard Clear Smooth for Replacement Strip Curtain Sold per Foot

  • Suitable for most average applications.
  • Temperature Range: -20°F to 150°F (-28° C to 66° C).
  • Formulated with ingredients that meet USDA requirements for incidental food contact.
PHOTO-065

Manaras Monitored Photoelectric Cells N4X Retro-Reflective 5-50' Range

  • Monitored NEMA 4X enclosure retro-reflective type photocell
  • 2-Wire
  • Suited for harsh environments
  • Range: 5-50 ft
Manual
AE-100

Linear Commercial Single Door Telephone Entry System (ACP00937)

  • Designed for use as a primary access control device for apartments condominiums and offices with up to 125 residents.
  • Installation choices: surface mount recessed gooseneck
  • Stainless steel front panel
  • Telephone style keypad with lighting
  • Accepts a total of 125 directory listings or stand-alone entry codes
  • TTY jack for connection to text communication for the hearing impaired
    • .......more details
EXT-HDWR-BOX-7/8

Installation Box for Extension Springs for 7' & 8' Doors

  • Installation Hardware includes 3" sheaves sheave strap cables safety cable fasteners
15-50B22LGH

Sprocket 22 Teeth 1" Bore 1/4" Keyway w/SS

2300-390

Linear Friction Disc 5.5 x 2.06 x .18 pair

PROBE-200

EMX CARSENSE-101 Direct Burial Probe with 200' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
19-50106MN

Chain # 50x106 (5-1/2') with Master Link Nickel Plated

  • Also known as: K19-50106MN 199023NP
  • Complete kit includes: #50x106 Chain master link and clip.
34202

Doorlec V-belt Pulley MA15 1-1/2" x 5/8" bore

15591

Doorlec "C" Clip 5/8"

2807.156.170

Whiting .156 x 2-3/16 x 17" Curbside with Cones

Q277

LiftMaster Wiring Harness Kit DC2000 K94-50262****no longer available

  • Compatible with LiftMaster® Models SL3000 and CSW200 Perimeter Access Systems
OTBH-6232-AM05

Manaras Trolley Operator 1/2 HP 208V 3Ph Monitored Board w/Eyes Apt. Model

  • The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
  • 100 cycles per day
  • It incorporates a drum-shoe type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • #41 full roller chain
  • Includes monitored N4X eyes (PHOTO 061)
    • .......more details
41DJ003MC

LiftMaster Receiver Logic Board DC WiFi RJO

  • Security+ 2.0 Receiver Logic Board Replacement Kit
  • For use with various LiftMaster® and Chamberlain® DC Wi-Fi® Wall Mount Residential Jackshaft Garage Door Operators; powered by myQ® and manufactured 2023 to present
  • The unit will feature a yellow circle learn button
2100-765

Linear Shaft Pulley HSLG

E/BLOP/130

Automatic Systems Kit for Breakaway Arm BL229 Option ** Price by Quote Only

  • This is an option for the BL229 arm
GALV-312-334-144-L

Torsion Spring .312 x 3-3/4" x 12ft LH Galvanized Yellow

  • Wire size: .312
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-312-334-R

Cut-to-Length Torsion Spring .312 x 3-3/4" Right Hand Wound Galvanized Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
  • Galvanized
GLASS-ONLY

Elton Sealed Glass Only Clear Made to Order Quote Only

  • Thermal replacement glass only
PRO-EHJ-7583U-RH

Micanan 3/4 HP 208V 3PH Cont. Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • Comm / Ind Continuous Duty Belt Drive with Emergency Chain Hoist
  • 24V class 2 control circuit with 40VA transformer to protect against short circuit
  • On board receiver with antenna
  • External radio control terminal strip
  • Low friction powder metal limit cam nuts with fully adjustable rotary type limit switch assembly •Three button open-close-stop control station Nema-1
  • Continuous duty industrial motor with overload protection
    • .......more details
Installation Manual Specification Sheet
K23-11442

LiftMaster Limit Switch SPDT w/Roller and Lever

  • Same as 23-11442
GALV-262-258-144-L

Torsion Spring .262 x 2-5/8" x 12ft LH Galvanized Red/Yellow

  • Wire size: .262
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-262-2-144-R

Torsion Spring .262 x 2" x 12ft RH Galvanized Red/Yellow

  • Wire size: .262
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-262-2-144-L

Torsion Spring .262 x 2" x 12ft LH Galvanized Red/Yellow

  • Wire size: .262
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-262-258-144-R

Torsion Spring .262 x 2-5/8" x 12ft RH Galvanized Red/Yellow

  • Wire size: .262
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-218-2-144-R

Torsion Spring .218 x 2" x 12ft RH Galvanized Yellow/Orange

  • Wire size: .218
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-262-258-L

Cut-to-Length Torsion Spring .262 x 2-5/8" Left Hand Wound Galvanized Red/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-218-2-L

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Galvanized Yellow/Orange Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
GALV-234-2-LH

Cut-to-Length Torsion Spring .234 x 2" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
GALV-234-2-RH

Cut-to-Length Torsion Spring .234 x 2" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
K20-8100M-DC

LiftMaster Motor 1HP 90VDC 1PH

  • K20-8100M-DC is a 1HP Motor Replacement Kit (90VDC BM CF). For use with various LiftMaster® 1HP 1-Phase Commercial Door Operators and Gate Operator Systems
50-19503

LiftMaster Push to Open Bracket

  • Allows the gate to swing away from the property
  • To be used with LA400 and LA412 gate operators
Installation manual
REEL-20

Devanco Take-Up Reel 2-Wire Metal 18-ga 20ft Black

  • 18-gauge
  • 20 ft extended
  • Take up reels are NOT recommended for use with any failsafe type edge. Use coil cord only.
  • Also called Reel cord
  • Comes with reset button for CSA conformity