Devanco Canada - Get The Right Garage Door Opener‎ and Parts

.295-2-R

Cut-to-Length Torsion Spring .295 x 2" Right Hand Wound Blue

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

109950

Linear 1-Channel Multi-Code Gate Receiver 12-24V

Operates on 12-24 volts AC or DC power
One channel
Whip antenna
3-foot antenna coax and bulkhead connector
Codes: 1024 (set by dip switches)
RF frequency: 300 MHz or 310 MHz (jumper selectable)

.......more details

Programming Instructions

K001A6424

LiftMaster Circuit Board Assembly Kit 2010 and later 315 MHz

UL325 Replacement circuit board for Medium-Duty Logic Commercial Operators
Used on models MJ MH MHS MT BMT and MGJ (UL325 compliant operators)
315 MHz intergral radio receiver accepts 20 Sec+ remotes or unlimited dip switch

Installation Manual

.192_2"-LH

Torsion Spring .192 x 2" x 12ft LH Silver

Wire size: .192
Inside diameter: 2"
Length: 12 ft

.207_1-3/4"-LH

Torsion Spring .207 x 1-3/4" x 12ft LH Brown

Wire size: .207
Inside diameter: 1-3/4"
Length: 12 ft

MK00066

Reversing Contactor Allen Bradley 24V coil

Allen Bradley no. 104-C16KJH22-X6
Cat. no. 100-C16*10

T-931-M

FL-Allstar 1-btn Mini Transmitter 109391-311 MHz

This single channel miniature transmitter controls one door.
It has a nine switches encoder with three positions: + 0 and -.
Manufacturer's model number: 9931MT (190-109301)
Dimensions: 1 3/8'' x 2 3/4'' x 1/2''

24-115-1

Relay 8 terminal 115VAC DPDT

For most operators with contactor
Will work on Liftmaster MH Lynx MCJH and more

14FT-TROLLEY-SET

LiftMaster 14ft Double Angle Rail Set for Comm. Trolley Ops 10-5814-P (2 pcs) *Actual length 203"*

Double Angle Rails for doors up to 14' high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
Actual Length 16' 11"

VBELT_4L340

Manaras VBelt 4L 34" - repl. by A32

Used on MTH/MTBH APE APT models
Same as Doorlec 19030

DRUM005

Manaras Steel Brake Drum 5/8" - replaces DRUM004

Replaces DRUM004
Brake drum with edges for current braking systems (2000 - current)
Used on all Manaras operators except Gear Head models.
Use with BRAKEPART019 (old part BRAKEPART017)

RADIO-15

Manaras MRX-1000 1-Channel 24V Receiver with Commercial Antenna 313 MHz ** To extent of inventory

Controls one operator with MT series transmitters.
Operates on 24VAC.
A LED indicates that the unit has been activated.
Can be installed directly onto the control box of a Manaras operator.
Includes a commercial receiver antenna for increased range.
Will be replaced by RADIO-RE901A

.......more details

Installation Instructions

2704.162_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long Galvanized

Most common torsion spring for cube trucks
Specs: .162 x 2-3/16" x 18" Long
For Curbside order part # 2705.162*180

100BL

1" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1701

1003-4"-200FT

Bottom U-Rubber 4" Black 200' Long

200ft spool of vinyl insert.

25-42-120

Extension Spring 7' Door - 120 lbs Green

Double - Loop
25" long 42" stretch 120 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-20500

Truck Door Bearing and Bracket Plate Assembly for Roll-Up Doors

Zinc plated finish
Bearing with 1" bore pressed in a football style flanged retainer
Factory installation assures proper bearing alignment
Cross reference: T #51038 W #4033 320000

R5998

Shaft Collar 1-1/4" OD 2" 2 Set Screws 3/8-16

With 2 set screws

H11G05

Hinge #5 x 11 gauge

11 gauge # 5 hinge - 0.76 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

R5201

Cast Iron Pulley 3"

Bored for 3/8" diameter bolt
Cable diameter: 1/8"
Cast iron pulley mounted on two pressed sealed bearings.
Radial Load: 400lb

BK050/PR

Residential Bottom Bracket Low Headroom BB-5 LHR Sold as a Pair (L & R)

Minimum door thickness 13/16"
Gauge: .109 Height: 6-7/16"
A pair includes one left hand and one right hand bracket.

25-10250

Truck Door Bottom Fixture for Todco Roll-Up Doors

Steel construction Zinc plated finish
Cross Reference: T #69249 T #61352 W #4003 230000

4X16PO50

Devanco Loop 4' x 16' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

ST18COP

Copper Stop 1/8" 100 Stops per Pkg *price on request

Stops ONLY
Sleeves sold separately part # SL18COP

27-20300

Truck Door Cable Drum Roadside (LH) for Todco Roll-Up Doors

Cast aluminum construction
Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines left or right drum.
Holds up to 130" door cable
Cross Reference: T #59033-2 T #59129-2 W #4014 330000

TC1

Tri-Code Transmitter 1-btn Visor - DISCONTINUED

10 dipswitch format 3-position slide switch
Compatible with Multi-Code 300 & 310 MHz Delta3 & Stanley 310 MHz
Discontinued 7/1/13

375LMC Programming Instructions Instructions de programmation pour 375LMC

STRUT-3-30'

Door Strut 3" Hemmed 30ft Long

Reinforcement bar 3"

.283_1-3/4"-RH

Torsion Spring .283 x 1-3/4" x 12ft RH White

Wire size: .283
Inside diameter: 1-3/4"
Length: 12 ft

MD-00034

Micanan Connecting Link #410

39794A.S

Genie Universal Cable Keeper Kit 39794A.S

Universal Cable keeper kit for Genie Wall Mount garage door openers.
Compatible with models 6070H 6070H-B 6170H 6170H-B 6172H 6172H-B 6072
Genuine Genie Replacement Part

L956W

LiftMaster Wireless Multi-Function Control Panel Security+ 3.0

Wireless control panel can be installed almost anywhere in the garage.
Includes a large push bar for garage door opener operation and a light control button.
Built-in learn button enables fast & easy programming of remotes keypads myQ® accessories and Wi-Fi garage door openers.
Compatible only with LiftMaster Security+ 3.0™ garage door openers.
No wiring required. Powered by CR2032 battery (included).
Warranty: 1 Year

.......more details

Installation Manual Manuel d'Installation Compatibility Chart 2025 Comparison Chart 2025

OSH-6433-M-N1-LH

Manaras Opera-SH 3/4HP 480V 3Ph Monitored w/ N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

2120-493

Linear Gate Arm Assy Weld Style for Swing Gate

19045

Doorlec VBelt 4L360

50181

Doorlec Brake Assembly 230/208V W/Double Pulley

Complete brake assembly

BGARM

LiftMaster 10' Arm only for Techna Barrier Gate

For use on Techna gate operator

Installation Manual Manual d'installation

2110-274

Linear Clutch Shaft Assembly HSLG UPS

GAREX-24X12-WHTE

Garex Thermo Window Clear 24" x 12" White Frame

An original Garex window
Fits 1-3/4" thick door R16

RB-P-K10C

Miller Edge RBand Monitored Wireless Door Edge System

RBand is a monitored sensing edge transmitter/receiver system.
The receiver can be paired with up to three transmitters.
On board diagnosticsallows for easy set up and troubleshooting.
Offers pulsed and normally open outputs.
Ideal for commercial door operators manufactured after 2010.
Bi-directional link improves immunity to RF interference.

.......more details

IP-SDS

CDVI Point of Entry Exterior Single Door Surface Mount Video Intercom System

Intercom system designed for single resident or commercial properties providing video entry via IP with a free to download smartphone app.
Ideal for outdoor use on single home or small business.
Up to 32 monitors can be connected to this device.
Pushing the button will call all monitors inside the building.
170 degree fisheye camera single-button and audible anninciation.
IP54 (recommended to be put under a canopy or covering)

.......more details

MWT12B

Miller Edge Transmitter Binary Nema 4 Enclosure

The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
Response time: 70 milliseconds

.......more details

Installation Instructions MWT12B Spec Sheet MWT12B FAQ MWT12B

041D8993

LiftMaster Cover Silver 8365W 83650-267

Replacement LiftMaster® Cover.
Compatible with various LiftMaster® 8365W Series WiFi® AC Chain Drive Garage Door Openers; powered by myQ

41D3485

LiftMaster Chain Kit 10'

For use with various chain drive garage door openers that utilize a T-rail and have a 10' garage door
Same as 041D3485

LPEXP

LiftMaster CAPXL Loop Detector Input Board

Automatically trigger a phone call to a guard or office when a guest arrives
Mounts inside of CAPXL
Works with CAPXL and LOOPDETLM Plug In Loop Detector (Each sold separately.)
Operating Temperature -20°F to 130°F (-29°C to 54°C)
Dimensions: 2.8” x 2.3”

15-50B72QGH

Sprocket 72 Teeth 1-1/4" Bore 1/4" Keyway

For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators

RENO-BX4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector

The Model BX is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
Eight detection sensitivity levels are selectable by means of a front panel mounted rotary switch external dip switches
Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep

Installation Manual Sell Sheet

K41-0157-000

LiftMaster Cable Tension Monitor Right Side

For use with various LiftMaster® MAXUM Series DC 700 lbs. to 2200 lbs. Standard-Duty and Extended-Duty Jackshaft Jackshaft Hoist and Trolley Commercial Door Operators
This service kit is compatible with the following MAXUM models: JDC JHDC and TDC.
NOTE: Refer to K41-0156-000 for Left-Side Cable Tension Monitor

BEA-10LIGHT-TBASE

BEA Modular LED Signal Base

To be used with the BEA-10LIGHT modules.

User Guide Datasheet

41151R

Genie Light Kit Wall Mount

Bluetooth Light Assembly for the Genie #6070 & 6170 Wall Mount garage door opener.
Replacement light kit for 39945R

50220

Doorlec Lifting J-Arm Assembly Trolley

OPH-6533-M-N1-RH

Manaras Opera-H 3/4HP 600V 3Ph with Monitored ECB and N1 Photoeyes RH

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

E/1929/069

Automatic Systems Round Arm Ass'y 13' (BL229)

Used on the BL229 gate op.

DC750-100

Dyna-Hoist DC Series Direct Drive Opener 3/4 HP 110/240V 1ph ** Price by Quote Only

Direct drive operator with a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
Continuous duty 0.75 HP 90 V DC 1750 rpm motor 110 to 240 V 1 PH and 60 Hz power supply.
Integral absolute encoder to control the door travel
24 V 7 amps back-up battery pack and 3/8” ratchet socket to accept and crank for manually operating the door in case of power failure
Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
Pulse with modulation programming to provide soft-start soft-stop dynamic brake and speed control

.......more details

Pulse Series Installation Manuals DC Series Brochure

OSH-6233-M-N1-RH

Manaras Opera-SH 3/4 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

41181R.S

Genie Main Control Board Kit 6070H 6170HB

Primary electrical and logic interface for Genie's 6070 and 6170 Garage Door Openers
DOES NOT include the Genie Aladdin Connect Control Board #41153R

SPR50B18X1

Sprocket 50B18 1" shaft 1/4" KW

18 tooth sprocket for #50 chain

HAE00070

Linear LDCO Control Board (841/850/852/863B)

PLATE078

Manaras Opera Motor Plate Green

Plate only

41C0296

LiftMaster Transformer 12V RJO

Compatiblie with LJ8900W 8500W

8069-080

DoorKing MicroPlus 1-btn Rolling Code Transmitter

Keychain style remote
Black
Not compatible with HomeLink
Dimensions: 2.5 x 1.5 x .5 inches

1-0298

RW Track Bracket 1x33

Description: Formed Steel 3/16" thick
Finish: Black enamel

SEL2641R433-C4P

Erone 4-Relay Stand Alone Power Receiver 433MHz

Up to 85 transmitter keys
2 NO relay + 2 NO/NC relay (230Vac)
Self-learning memorization
Relays with Pulse step or delayed operating mode.
Power requirements: 12/24Vac/dc
Dimensions: 140 x 115 x 53mm (5.5 x 4.5 x 2in)

.......more details

Wireless System Chart

65-52081-16

LiftMaster Dual Trolley Mod. #41 Chain for 16ft High Door Includes (2) 16' (Actual length 227") tracks and (1) Round Bar 240"

Provides drawbar-type operation on very wide (over 22 ft) standard lift sectional doors where a side-mount op. is preferred over a drawbar op.
Includes 16ft tracks Round Bar 1" x 20'
For H/J/GH

BK027/PR

Commercial Bottom Bracket 1-3/8" 2"or 3" Inside Hook Up BB-4 Sold as a Pair *Includes (1) Right and (1) Left Bracket (2) Clevis Pins (2) Cotter Pins*

Includes 1 left and 1 right hand bracket
BB-4 SF

236515

Wayne Dalton Res. Bottom Bracket Roller Holder LH

Compatible with Wayne Dalton 9100 9400 9600 9800 Foamcore II garage door models.
Pins & Cotters Included
Top quality galvanized steel
Dimensions: 4" Wide x 1.25" High x 1" side flange with milford pin
Sold as a single unit

MOD065B

Manaras Trolley Hoist #41 Brake Release Kit Includes 12' Shaft

Chain hoist for manual hand operation of standard lift doors equipped with trolley operators.
The 1" cross-header shaft (12' long) drives the front idler of the drawbar
For use with operators with #41 chain
When applicable it incorporates an electric cut-out and brake release cable
Hand chain for 14' high door is standard
Hoist assembly width is only 8.5"

.......more details

CP-BR-ASSY-115V

Lynx Brake Kit with 115V Solenoid CDJH

Complete brake kit with solenoid

ME123-2M-BLK-U

Miller Edge Black Universal 2 -Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

SPP2905-TC

Telco SpacePak Diffused Proximity Photoelectric Sensor with 5m Cable

Multi-voltage diffuse proximity photoelectric sensor with a detection range of 5 meters without the need for a reflector.
Operation mode and max sensing range: Diffuse proximity: 0-5 m
Compact rectangular housing (50 x 50 mm x 17mm)
Power output and signal level indicators

User manual Manuel d'utilisateur Spec sheet

VBELT_5L290

Manaras VBelt 5L 26" - repl. by B26

Used on OMJ OMH
Type B belt

3BXT-BLACK

Replacement Button/Switch Only - Black

Replacement button for 3BXT

PRO-HHD-7525U-R

Micanan 3/4HP 220V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

3/4 HP208V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation Manual (EN)Specification Sheet

620-101293

Linear Apex II Module

Newer model from Jan 2016
The APEX II is backwards compatible but you will need to add monitored external entrapment devices.

ETH-A

Doorlec Trolley Type Apartment Op. 1/2 HP 120V Head Only

This operator can be wire to receive radio and photo electric control systems loop detectors etc..
Headroom Required: 2" minimum at doors highest arc of travel

44-30703

LiftMaster Enclosure SL595

Replacement SL595 Enclosure
Also known as: 44-18491

HD3120-BLACK

Commercial 3" Inside Slide Lock Black Powder Coated

Track use: 2" or 3"
Throw: 2.62"
Slide bar: 0.138"
Individually wrapped

BK149/PR-BLACK

Residential Bottom Corner Bracket RBB-75 Black Powder Coated sold as a pair

For use with 2" straight track
Individually wrapped

MA041

LiftMaster Mega Arm Tower Lock & Keys (No Dust Cover)

Comes with two keys

T-831

FL-Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 311 MHz 107483

Open/Close/Stop stationary remote for 1 door.
Designed for commercial automatic door and gate operator applications.
This transmitter can operate a single receiver connected to one operator
Compatible with 3-channel Allstar and MVP receivers
Easy access to battery and coding switch
Power: 9-volt battery

.......more details

CAP475

Capacitor 125VAC 475MFD

Motor Start Capacitor 125V 475 MFD

10.1002.3

Truck Door Rivet with Splines 1/4" x 1" Steel

Mild steel construction
Round head design 3/4" head
Standard hinge rivet

CAM017

Manaras Synthetic Disconnect Cam Opera

HW0427-LH

SteelCraft Commercial Bottom Bracket Left Hand Only

Left Hand bracket only
Can be used for both 2" and 3" tracks
To be used on door tracks that are installed wide enough to accomodate the side cable pulley
Door hardware must start with a #1 hinge on the bottom panel for both 2" and 3" hardware
Adjustable cable can level door from the ground
Heavy gauge steel construction

.......more details

MK00643-MOD

Micanan Auxiliary Apt. Circuit Board for Red/Green Light Feature 115V Models Installed on Op.

Available option for electonic circuit board (E) models only

19-4071

LiftMaster Chain #40x71 No Master Link

#40 x 71 pitch no master link
Same as G194071
Compatible with LiftMaster Model SL595GL Slide Gate Operators.

71-909210MD

LiftMaster Field Mod. Dual Aux. Limit Switch

41A5585

LiftMaster Drive Gear & Sprocket Kit 3/4 HP

Kit includes: Worm gear Helical gear Retainers Washers Pins Bearing plate Grease Detailed instructions
Compatible with Liftmaster 2575 3275 3575 and 3575S models