Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
MK-00071

Micanan Transformer 575V-115V-50VA (MK00161)

2528.093

Whiting Dual-Spring Shaft 93" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • Holes pre-drilled
  • For Whiting balancer #2376
LT100HLTB3815

Telco Thru Beam Transmitter with LED M12 Hi-Power 15M Cable

  • Sensor Light Transmitter with LED
  • M12 High Power 15M Cable
2200-926

Linear Gear Reducer 60:1 Models SWR SWD

HCRH1

Hinge Combination Roller Hinge Assembly #1 Galvanized

DJ501L5

LiftMaster Industrial- Duty Jackshaft Doorlock 1/2HP 115/230V 1Ph ***No Longer Available

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • These operators include a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with vertical or high lift and mounted to the side or the front of the hood when used with rolling doors and grilles.
  • DJ operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology
  • Security+ 2.0®
    • .......more details
MD-00247

Double Sprocket 41B14 / 41A32 with 3/4" Bushing

  • Double sprocket for clutch shaft on PRO-H/HB
  • includes 3/4" ID brass bushing
MF00009

Micanan Hex Head Bolt 1/4" - 20 UNC x 2-1/4" Partial Thread

  • Used on PRO-HHD
  • 1 required per operator
MF00006

Micanan Hex Head Bolt 1/4" - 20UNC 1/2" Full Thread

  • Used on various Micanan operators
  • 2 required per operator
MK-00033

Micanan Transformer 575V-24V-40VA

SPUR_GEAR

Spur Gear For Holdown Assembly

SRB-6

Standard Riser Bracket for 6" Above Dock or Less 6"

  • Standard 6" Riser Bracket for 6" Above Dock Door or Less
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
HRB-8

High Riser Bracket for 7" Above Dock or Higher 8"

  • High Riser 8" Riser Bracket for 7" Above Dock Door or Higher
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
E/BLOP/150

Automatic Systems Safety Edge for BL229 14'-9" (EABLOP/150)

MK00594

Micanan Auxiliary Contact Block 100FA40

ME123-C7

Miller Edge Flat 3-1/2" Wide PVC Mounting Channel Sold by the Foot

ME00071

Micanan Idler Shaft PRO-APTC

LVB1224-11

Laminated Bumper Black 12" Projection Vertical Installation 24" L x 11" W Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LVB1220-11

Laminated Bumper Black 12" Projection Vertical Installation 20" L x 11" W Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB1212-12

Laminated Bumper Standard Black 12" L x 12" W 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB920-11

Laminated Bumper Black 9" Projection Vertical Installation 20" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB812-18

Laminated Bumper Standard Black 12" x 18" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TVB424-11SF

Steel-Faced Laminated Bumper Black 5 1/4" Projection Vertical Installation 24" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
TB412-36SF

Steel Faced Laminated Bumper Black 12" x 36" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB410-24SF

Steel Faced Laminated Bumper Black 10" x 24" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB406-36SF

Steel Faced Laminated Bumper Black 6" x 36" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB410-24SF

Steel Faced Laminated Bumper Black 10" x 24" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB410-14SF

Steel Faced Laminated Bumper Black 10" x 14" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TVB624-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 24" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
TB612-14SF

Steel Faced Laminated Bumper Black 12" x 14" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-14SF

Steel Faced Laminated Bumper Black 12" x 14" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB636-11

Laminated Bumper Black 6" Projection Vertical Installation 36" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-18

Laminated Bumper Standard Black 12" x 18" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
MK-00805

Micanan Heater Probe in Reducer 24V 20W Brass Fitting Field Install

T010

Manaras Trolley Track 10ft for 1/2HP models *Actual length 150"*

  • For models MLT/OTH/OTBH 1/2hp only used with Chain #48 (#410)
HINGE-311-PCG

Powdercoated Hinge #3 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #3 - 0.73 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
27119

Doorlec Electric Motor TEFC 3/4HP 208/480/575V DC423

  • Frame size is 56C
K32-8002

LiftMaster Gear Reducer

  • Also known as: 32-8000 G328001 32-8001 328002 328001 32-8002 G328002
MG00011

Micanan Ribbed Hex Nut 1/4" - 20 UNC

  • PRO-GHC operator parts
  • 12 required per operator
MD-00005

Sprocket 410B12 3/8" NO KW 2 SS 1/4"

MH00043

Micanan Flange Bearing 3/8" D

31343

Doorlec Sprocket 41B23 - 5/8" bore 2-Hole

90-PGR

LiftMaster Parking Gate Radio Mod. Kit

  • G90PGR includes the limit switch wiring and bracket.
  • Used on PG HBG and BG models.
SL585103U

LiftMaster Industrial Slide Gate Op.1 HP 208/230/460V 3 Phase - Heater NOT Incl.

  • POWER: 115/208/230 VAC. Single Phase
  • ACCESSORY POWER: 24VAC 500mA max.
  • MONITORED SAFETY INPUTS: 3 Main Board 3 Expansion Board.
  • TEMPERATURE SPECIFICATIONS: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater -40°F (-40°C) to 140°F (60°C).
  • Heater option: HTRNB or NTR460 for 460V operators
  • UL USAGE CLASSIFICATION I II III and IV.
    • .......more details
Installation manualManuel d'installationFirst step for installationPremière étape pour l'installationSell sheetBrochureWiring diagramSchéma câblage
MM-00035

Micanan Chain Keeper

3BLM

Exterior Control Station 3 Button N4 with Mortise Lockout in Metal Enclose

  • Open-Close-Stop
  • Dimensions: 7" h x 2-3/4" w x 3-1/2" d
  • Exterior surface mount
3BLM
108135.0002

Overhead Poly Type V- Belt for Old RG 32" *** by quote only

RCB-TIP

Roller Chain Break Replacement Tip Only *** NLA

  • Replacement tip only for RCB-2560
7-21-1A

Lynx Barlock Latch

  • Comes with screws
Assembly Manual
MF-00018

Micanan 3/8" Take-Up Bolt c/w 2 Hex Nuts & 1 Lock Washer

CABLE_364SS-250

Cable 3/64" 7x7 250' Stainless Steel

  • Not for use in aircraft applications
  • Type: T304
IRB-RET-HD

EMX Industries Steel Protective Hoods Only Black Fits Old Style IRB-RET Only

  • Protective Hoods for the Universal Retro-Reflective Monitored Photo Eye System (Item #IRB-RET) by EMX
  • Easily installed using the existing mounting holes of the Photo Eye
  • Constructed of zinc plated steel
  • Black powder-coated finish
  • Will NOT fit the new IRB-RET UL325-2018 units
MD00001

Micanan Bevel Gear 20 Tooth 3/4" ID

  • Comes with keyway and 2 set screws
  • Used on PRO-GHCW
MD00002

Micanan Bevel Gear 20 Tooth 5/8" ID

  • Comes with keyway and 2 set screws
  • Used on PRO-GHCW
ALUM-5P3

Aluminum 24" x 100' Spool Espresso # 5P3

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 5P3
  • Reverse side is #431 Bright White
Colour chart
COLLAR004

Manaras Collar 5/8"

109007

Allstar Slide Switch Only Ivory *** Discontinued

  • ABC selector switch only
VWS-34-WHITE

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box White

  • Pan head
  • S point
VWS-34-BROWN

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Chocolate Brown

  • Pan head
  • S point
VWS-34-MED-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Medium Oak

  • Pan head
ALUM-556

Aluminum 24" x 100' Spool Forest Green / Vert Foret # 556

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 559
  • Reverse side is #431 Bright White
Colour chart
VWS-34-ZINC

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Zinc

  • Pan head
ALUM-569

Aluminum 24" x 100' Spool Saddle Brown / Brun Fauve # 569

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 569
  • Reverse side is #431 Bright White
Colour chart
36190S.S

Genie Control Board 6-Terminal

  • Replaces board # 34514R # 20380R
  • 36190S.S is a six terminal board for use primarily with ML Chain Glide devices.
  • Replacement board for Chain Drive models: IC250B PMX300 PMX500 ICB and 496.696 CD/B
  • Replacement board for Chain Glide models: GCG350 GCG350L GCG350M PCG400 PCG450 PCG500ML PCG600 PCG650 H2000C OCG510 OCG550 OCG600ML OCG710 and OCG800ML
DM18VL-T/FORCE

Cable Drum Vertical Lift 18' D1100-216-1 Pair Torque Force

  • 18' Vertical Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x2" hardened cup point set screws installed with red heads.
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
  • Max. Door Height: 18'-1".
  • Rated Lift per Drum: 660 lbs.
  • Max. Cable Diameter: 3/16".
    • .......more details
MOD060-12FT-MAX

Manaras Auxiliary Trolley #41 Chain Modification Only

  • Provides drawbar operation of a standard lift door with the use of a jackshaft operator
  • Includes tracks for doors up to 12' high. Additional fee for over 12'
  • Maximum door width 22'
BI-004

Astragal Bottom Cloth Black PVC Sold by the Foot

MP-00002-575V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

  • Controlling action of two lights- sockets supplied on cover
ACP17

LiftMaster Fire Access Box with Cable Release***discontinued no more stock***

  • Pull the interior T-handle to release the gate chain
  • Access doors on front and back
  • Includes a hole for standard or fire department padlock**
  • Padlock not included **
PRO-HHD-7581U-R

Micanan 3/4HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 3/4 HP208V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation Manual (EN)Specification Sheet
33223A

Genie Bushing

  • Drive shaft bushing on PMX500 Chain Glide
22016

Doorlec Selector Switch 2 Position OFF/ON

40-3505-FR

LiftMaster Warning Sign Aluminum French

1KXL-BC

Key Switch N4 Exterior Lockout Control with Best Cylinder Surface Mount

  • Two position ON-OFF
  • Dimensions: H=4-3/8" W=4-1/8" D=2-5/8"
39537R.S

Genie Control Board

  • Replaces any circuit board starting with 37028
  • Does not come with new housing
  • Compatible with models 1022 1024 1042 1026 2022 2024 2042 2026 and 2027
MX00034-575V

Micanan Brake Assembly for PRO-HHD with 575V Solenoid (MX00206-575)

  • Complete brake assembly including 575V solenoid - solenoid cover sold separately part #MM00011
MB-01002

Micanan Electric Motor Only 1/2HP 110/220V 1PH Base Mount TEFC FR56

  • Base Mount TEFC electric motor
  • Fits models: TW TBW JWHWHHDW SDW
1005-1-3/8-14

Aluminum Bottom Retainer U-Shaped 14' Long

  • For door thickness 1-3/8"
HBSLUD

Stainless Steel Low Headroom Bottom Fixture 2-3" Door 2-3" Track Double End Stile Sold per Pair ** NLA

  • Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
  • Laser Cut for a Clean Finish
  • For Low-Headroom Track
  • For 2" or 3" Doors
  • Fits 2" or 3" Track
  • Double End Stile
    • .......more details
MC00007

Micanan Gear Reducer BHC 80 40:1 143TC (2 HP)

.306-258-L

Cut-to-Length Torsion Spring .306 x 2-5/8" Left Hand Wound Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
6X35PO50

Devanco Loop 6' x 35' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
1003-5"-PER-FT

Bottom U-Rubber 5" Black Sold per Foot

MP-00012

Micanan Reverse Limit Switches Mod.

  • For relay logic models
82424

Marantec Power Board for RV- 8000 & LC-1000 Models

37350R

Genie Network Adapter GN-BX

  • To be used in conjunction with Closed Confirm remote.
  • For use on IntelliG® and TriloG™ Pro Series models when using any Genie-Net Accessory.
Programming instructions
BOLT016

Manaras Hex Bolt 1/4-20 x 4

SPRING002

Manaras Brake Spring

MX00128-A

Micanan Clutch Pad 1-1/4" bore x 5" for PRO-GOHD *** NLA

MGH-6537-ECB-RH

Manaras 3 HP 600V 3P Jackshaft with Elect. Circuit Board Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
BLSI12-PM39X

Pivin Drapeau Spring Assembly for BLS12

MX00002-110V

Micanan Brake Assembly for PRO-TB/APTB with 110V Solenoid Outside - Old Style

  • Replaces MX00140-110V
MG020-Y-2E-03

Miller Edge Sensing Edge Yellow 2-Wire End Outlet 3 ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
7001-14-BRONZE

Commercial Side & Top Weather-Strip 14' Long - Bronze (BZ)

  • Bronze galvanized steel with bronze dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
7001-10-BRONZE

Commercial Side & Top Weather-Strip 10' Long - Bronze (BZ)

  • Bronze galvanized steel with bronze dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
Q230

LiftMaster Mounting Bracket (2 pcs) MIR-1 (K77-50240)

  • Steel Bracket Mounting Plates (2) For Elite Miracle and LA500 Operators
  • Dimensions: 9" x 2-1/4" (1/2" holes) and 6" x 2-1/4" (5/8" hole)
MD-00111

Sprocket 410B9 X 3/8" No Keyway 2 SS 10-24

47DCT

LiftMaster Receiver Logic Board Sec+2.0 Non-MyQ

  • 047DCT is a replacement Security+ 2.0® receiver logic board.
  • This replacement board does not feature MyQ® technology.
  • This 315MHz receiver logic board is compatible with various LiftMaster® AC chain drive and belt drive garage door openers; made after 2011.
  • The unit will feature a yellow learn button.
  • Same as 47DCCR1 47DCCC1 47DCCL1 047DCT41D8060 1D8060