Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

MGH-6534-M-N1-RH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
29201

Doorlec Transformer 460V pr 120V sec 35VA

  • 460V prImary 120V secondary 35VA
GALV-393-6-R

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Galvanized Orange Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized
GALV-343-258-R

Cut-to-Length Torsion Spring .343 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-319-334-R

Cut-to-Length Torsion Spring .319 x 3-3/4" Right Hand Wound Galvanized Blue/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-306-258-R

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Galvanized Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-283-258-L

Cut-to-Length Torsion Spring .283 x 2-5/8" Left Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-250-258-L

Cut-to-Length Torsion Spring .250 x 2-5/8" Left Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
GALV-250-258-R

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
CLM125-H

Linear Credential Clamshell Card HID 125kHz Proximity Support 25 pk

  • Made of sturdy ABS plastic Off White
  • Complies with the Wiegand communication protocol and is compatible with certain HID prox card readers
  • Contactless: up to 8" read range
  • Supports printable 14 mil CR80 adhesive-back PVC cards
  • Sold in lots of 25
  • Same as: 830-00420
  • .......more details
CPT215-END-KIT-T2

Miller Edge End Kit for CPT215 10K Ohm Resistor (T2) Configuration

  • Kit contains: (2) Caps (2) cages (1) wired plug (1) 10K plug (1) non-mon. plug (2) screws
  • No glue is required
GALV-273-334-R

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Galvanized Orange/Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
3228.3

Whiting 2" Nylon Roller 3" Stainless Steel Shaft

  • This is a Whiting original roller
10FALCON-EXXL100

BEA Falcon Motion Detector w/Exp Proof Housing 100ft Cable Mount 6.5' to 11.5'

  • FALCON EX combines a microwave activation sensor with an explosion-proof / flame-proof housing
  • Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
  • FALCON EX can be mounted from 6.5' to 11.5' to fit any industrial application.
  • Nema4/IP66
  • Detection Zone: Falcon EX XL: 13’ Ă— 6 ½’ @ 8 1â„5’
  • Oerating termperature: -22-140F
  • .......more details
GALV-283-2-R

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
K41-0391-000

LiftMaster EMI Board 1200 (120VAC/240VAC) for Maxum Operators

  • For Maxum op
19-40ML-SS

Master Link #40 Stainless Steel

  • For #40 chain
OSH-6532-M-N1-LH

Manaras Opera-SH 1/2HP 600V 3Ph Monitored w/ N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
SETR2641AM2KP

Erone 2-Channel Mini Transmitter with Paradox Tag Black 433MHz

  • With built-in Paradox tag
  • Heavy-duty construction
  • Elegant & easy to carry
  • Unobstructed range: 656 ft (200m)
  • 60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
  • Two lithium batteries (CR2016) included
  • .......more details
PRO-SD-10081-U-RH

Micanan 1 HP 208V 1P Horizontal Sliding Door Op. Monitored ECB N1 Eyes Right Hand

  • Designed for use on commercial / industrial sliding doors or sliding fire doors
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema 1
  • #41 roller chain & sprockets on all internal drives
  • Heavy duty 5L v-belt
  • Solenoid brake standard
  • .......more details
CP35

Roller Chain Puller 35-60

  • Allows chain to be pulled together for attachment of the master link
  • For 35 thru 60 chain
44-60-160

Extension Spring 10' Door - 160 lbs

  • Clipped ends
  • 44" long 60" stretch 160 lb load
E/1929/201

Automatic Systems Limit Switch Assembly

  • Used on the BL229 gate op.
OTBH-6532-M-N1

Manaras Trolley Operator 1/2 HP 600V 3 Ph Monitored w/N1 Photoeyes

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
GHW-383-1HP-RH

Doorlec Industrial Gear Head Door Operator 1 HP 208V 3P with ECB and Nema4 modification

  • Extra heavy-duty industrial-type electric door operator for damp environments.
  • Worm gear reducer 40:1 ratio
  • #50 roller chain and sprockets from operator shaft to door shaft. (#60 chain optional)
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter (also called friction clutch)
  • Rotary type limit switches
  • .......more details
MD00128

Micanan #410 Roller Chain 27 Pitch c/w Connecting Link

158176

Set Screw 3/8-16-1 Cup Point Zinc Plated Red Head

WHITING-ST

Whiting Strap Mounted Inside Door Option

  • This is an add-on option when ordering a Whiting door
GHW-353-3HP-RH

Doorlec Ind. Duty Jackshaft Carwash Op. 3 HP 575V 3P Right Hand *** By Quote Only

  • With DC2000 logic board
  • Worm-Gear Jackshaft type Industrial operator NEMA 4/12
OSH-6232-M-N1-RH

Manaras Opera-SH 1/2 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
MD-00242

Sprocket 41B14 x 3/4"

MQ00002

Micanan Cotter Pin 1/8" x 2.5" Long

OPH-6212-M-N1-RH

Manaras Opera-H 1/2HP 240V 1Ph with Monitored Board and N1 Photoeyes

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
  • .......more details
19-50HL-SS

Half (Offset) Link #50 Stainless Steel

  • For #50 chain
Q521

LiftMaster Wiring Harness Kit CSW-DM K94-50287

  • Compatible with LiftMaster® Model CSW200UL Swing Gate Operators
  • Also known as: 94-50287 K94-50287
178B45

LiftMaster Curved Door Arm (K10-10203)

  • Also known as: 1010203 105004 10-10203 K10-10203
  • For use with various LiftMaster® Medium Duty Commercial Door Operators
TDC7-14

Liftmaster Comm. 14FT Trolley Angle set (10-5814-P x 2) and #48 chain pack (TDC48-14) ***Actual length 203"***

  • Double Angle Rails for doors up to 14'6" high
  • Includes #48 chain pack
400-CBAC-EG-115V

FAAC 1042011277 Long (EG) Gate Arm w/Positive Stops 50-1/2" L *** Price by Quote Only

  • 400 CBAC EG Long Arm with positive stops
  • For hydraulic Swing Gate Operator
  • This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system
70600.000

Todco 2" Nylon Sealed WondeRoller

  • Special Order Item
  • Perfect for dry freight applications this roller has been tested to last 5 - 10x longer than a standard roller.
  • A fully sealed bearing to keep dust and debris out
  • 2 Inch Track WonderRoller is a nylon-coated-stem track roller for larger application panel truck doors
  • Polymer vinyl roller head couples with this stem to suit the constant up-and-down and roadway jostling on a freight or other large truck
  • Roller prevents build up in bearings with a sealed external washer
  • .......more details
041C0010

LiftMaster Chain Spreader 3/4hp

  • For use with various LiftMaster® and Chamberlain® 3/4 HP Chain Drive Garage Door Openers
GALV-295-6-144-R

Torsion Spring .295 x 6" x 12ft RH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
OGH-6534-M-N1-LH

Manaras 1 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
  • .......more details
GALV-343-258-144-R

Torsion Spring .343 x 2-5/8" x 12ft RH Galvanized Blue/Red

  • Wire size: .343
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-331-258-144-L

Torsion Spring .331 x 2-5/8" x 12ft LH Galvanized Red/White

  • Wire size: .331
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-319-334-144-L

Torsion Spring .319 x 3-3/4" x 12ft LH Galvanized Blue/Green

  • Wire size: .319
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-250-334-144-R

Torsion Spring .250 x 3-3/4" x 12ft RH Galvanized Green

  • Wire size: .250
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-2-144-R

Torsion Spring .250 x 2" x 12ft RH Galvanized Green

  • Wire size: .250
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-243-258-144-L

Torsion Spring .243 x 2-5/8" x 12ft LH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
MOTOR069

Manaras Electric Motor 1HP 575V 3PH 60hz TEFCXP 56C CFACE Only No Base

MGH-6536-M-N1-RH

Manaras 2 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
Q123

LiftMaster Electric Motor 12VDC K20-9012B-1

  • For use with various LiftMaster® Slide and Swing Gate Commercial Door Operators
2807.192.320

Whiting .192 x 2-3/16 x 32" Curbside with Cones

K72-12510

LiftMaster Limit Shaft Kit T commercial operators

  • Service kit for standard T commercial operators
15-50B16LGH

Sprocket 16 Teeth 1" Bore 1/4" Keyway w/SS

2200-817

Linear Belleville Washer

2100-1738

Linear Drive Shaft 1" Slide Gate HSLG

768-500

Fasteners Lag Screw Hex Regular Profile 5/16" x 3" 500/Pail

  • 7/16" head
  • Hex Regular Profile Head
9003-200-15-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 15' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
29120

Doorlec Transformer 120V pr 28 V. sec. 50VA

  • 120V primary 28 V secondary 50VA
15591

Doorlec "C" Clip 5/8"

2806.156.170

Whiting .156 x 2-3/16 x 17" Roadside with Cones

OTBH-6232-AM05

Manaras Trolley Operator 1/2 HP 208V 3Ph Monitored Board w/Eyes Apt. Model

  • The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
  • 100 cycles per day
  • It incorporates a drum-shoe type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • #41 full roller chain
  • Includes monitored N4X eyes (PHOTO 061)
  • .......more details
LB710-14

Laminated Bumper Standard Black 10" x 14" 7" Projection Horizontal Installation ** Special Order

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • .......more details
2200-309

Linear Double Pulley 7" 5/8" Bore

GALV-312-334-L

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Galvanized Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
  • Galvanized
15265

Whiting Rear Frame Conversion - 7" Header 2.5" Posts

  • An add-on option only. Price by Quote
50450

Doorlec Mushroom Push-Button Red for 3-Doors

  • Capable of opening three doors
  • NEMA 4 Enclosure
9-14-1

ARB Bracket 18-24" Adjustable Zinc Plated Half Hinge

  • Also known as Operator Reinforced Bracket
GALV-262-258-144-R

Torsion Spring .262 x 2-5/8" x 12ft RH Galvanized Red/Yellow

  • Wire size: .262
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-218-2-144-R

Torsion Spring .218 x 2" x 12ft RH Galvanized Yellow/Orange

  • Wire size: .218
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-295-334-R

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Galvanized Blue Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
FAAC-SPEC-ORDER

FAAC Special Order Gate Product Price by Quote Only

  • Ordered to customer's specs
18205

Wiring Harness 66" long

  • For use with Rite-Hite dock levelers
OSH-6213-M-N1-RH

Manaras Opera-SH 3/4 HP 240V 1 Ph Monitored ECB w/N1 Photoeyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
  • .......more details
GHW-311-1HP-RH

Doorlec Ind. Duty Jackshaft Carwash Op. 1 HP 115V 1P with ECB

  • With DC2000 logic board
  • Worm-Gear Jackshaft type Industrial operator NEMA 4/12
MC22-2WIRE-RH-BLK

Miller Edge MC22 2-Wire Non-Monitored Right Hand Black Includes Funny Flaps - Sold per Foot

  • €˘Electromechanical sensing edge for use on Cornell doors. •The MC22 is manufactured to exact specifications. •The MC22 is completely flexible and will contour to curved surfaces. •Touch sensitive signaling allows immediate reversing or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Vertical or horizontal mount •One year warranty
18011

Doorlec Gearbox for TCBOD Barrier Gate

K76-34644

LiftMaster APS Encoder 24V

  • Compatible with CSW24V CSW24VDC CSW24VH CSW24U CSW24UL RSW12U RSW12UL
HAE00058

Linear LDCO Encoder Board

LVB420-11/P1

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
  • .......more details
OGH-6533-M-N1-RH

Manaras 3/4 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
  • .......more details
K80-38735

LiftMaster Vent Plug Kit HCTDCU

CB14B0250-KOR

Cable 1/4" 7x19 250' Galvanized Supreme

  • Galvanized Cable 1/4" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
OSH-6533-M-N1-RH

Manaras Opera-SH 3/4HP 600V 3Ph Monitored w/ N1 Eyes

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
CAP-390-468

Capacitor 390-468 MFD 3/4HP *** To Extent of Inventory

  • Same as CP-CAP-COM-450-540
  • Motor start capacitor
15-80B9QGH

Sprocket 80B9 1-1/4" x 1/4" 3 HP

  • Also known as: 158012
GDI-TML31

GDI Trolley Bracket Only

  • Add on feature for JDMG-LG op
GDI-LG930

GDI Jackshaft & Trolley JDMG-LG-2030 Nema 1 Non Monitored

  • Low Headroom at 4-3/4" (Trolley)
  • Dimensions: 11.35" x 4.3" x 4.3"
  • Motor type: Brushless DC
  • Max cyles: Open/Cose per day = 3200
  • One operator can handle all AC voltages - Single phase and three phase
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • .......more details
GDI-HB321

GDI Direct Drive & Jackshaft HAML-RBH-A830 Nema 4 To Accept 1-1/4" Shaft UL325 Photo Eyes Extra

  • Compact & Light Weight - Fast Installation
  • Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
  • Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
  • Soft start soft stop
  • .......more details
OTBH-6213-1-M-N1

Manaras Trolley Operator 3/4 HP 240V 1Ph Monitored w/N1 Eyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
41A5507-6

LiftMaster Receiver Logic Board for 2500B/D (390 Mhz)

  • With end-panel
  • Also known as 41A5507-6C 41A5507-3
400CBAC01

FAAC 400-220V Operator Only ** Price by Quote Only

OPH-6113-M-N1-RH

Manaras Opera-H 3/4HP 120V 1Ph Monitored Board w/N1 Eyes RH

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
041-0203-000

LiftMaster Light Pod Kit Single Lens No Camera Model

  • Light Pod Replacement Kit. For use with various Chamberlain® Single Lens Belt Drive and Chain Drive Garage Door Openers featuring myQ® technology and no video camera; manufactured after 2021 only.
3-4742

Serco Lip Assist Bar ** Price by Quote Only

  • For Serco loading docks
234-143

Serco 3/4" SAE Flat Washer ** Price by Quote Only

  • For Serco loading docks
ZAP-8825-3-HPB

Zap 8825-3-HPB Series-3 Super-Drive Industrial Duty DC Op

  • Motor and controller: Continuous duty rated DC Motor with controller producing a powerful soft start/soft stop output of 2000 Newtons of force to drive commercial sectional doors while reducing mechanical impacts that cause premature wear of door components
  • NEMA 4X rated controller case: ZAP Controllers and push buttons are NEMA 4X compliant as a standard
  • Wiring type: C2 (factory default) B2 failsafe is standard with the addition of approved photo eye.
  • Radio control and external receiver terminals: Terminal strip provided inside the controller to provide quick convenient connections for adding external radio control receivers from any desired manufacturer
CRG5120P

Pentagon Crank Gear 5:1 20kg PVC *** Price by Quote Only

4580-304-CHARCL

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Charcoal 458-21 *** To Extent of Inventory

  • 304ml cartridge
  • Ideal for movement and perimeters joints
  • Meets ASTM C920 S NS Class 50 NT M GA O
  • Meets AAMA 802 and 805 standards
  • Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
  • Excellent resistance to UVs for indoor and outdoor use
  • .......more details
GRX-138-U-WHT-10

Garex 1-3/8" Bottom PVC U Retainer White 120" (10ft)

  • Does not include the u-rubber