Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
50680

Doorlec Clutch Assembly for LJH

8002-7FT

Side Weatherstrip with Black Rubber Bulb for Pedestrian Door 7ft Long

  • Aluminum and Black Rubber
  • Comes in 7ft lengths
MGR20-Y-2U-04

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet 4ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates.
  • 3-sided activation allows for immediate stopping or reversing of motion
  • Contours to round or square posts.
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
    • .......more details
Installation ManualSell Sheet
41A6388

LiftMaster Split Coupling (41B6299 / 41D8615)

  • Same as # 41B6299 and 41D8615
  • Compatible with all Liftmaster 3800 3900 & 8500 Residential and Commercial Jackshaft Operators.
  • Door shaft collar RJO
CLUTCHPAD007

Manaras Clutch Pad 1-3/4" ID 5" OD

OPJ-6112-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
PPK3M

LiftMaster Passport MAX 3-Button Keychain Remote

  • Provides total control with one remote for gated communities and commercial properties.
  • Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Programming InstructionsInstructions de programmationSell Sheet
GH105-L5

LiftMaster Gearhead with Brake 1 HP 575V 3-Phase Logic 5

  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • GH operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • MyQ Mobile App is a free download with no annual activation fee.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
TR490

Waist-High Pedestrian Tripode Turnstile with Heater & Pictograms

  • The TR tripod turnstiles are very robust products that can function equally well inside and outside buildings.
  • They are particularly well-suited to the needs of access control at leisure centers stadiums and factories.
  • Well-built for increased durability tripod turnstiles efficiently control high throughput.
  • Bi-directional turnstile made especially for quick access control in areas with high traffic but limited space
  • Non-removable stainless steel arms to prevent vandalism
  • Durable corrosion-resistant heavy-duty mechanism for extended service life
    • .......more details
CP-EB-MCJ-34115

Lynx E-Box for MCJH 3/4HP 115V 1Ph

  • Complete electrical box
MOD081

Manaras Damp Environment Oil and Dust Tight Modification Supplied with Monitored N4 Eyes

  • For applications where dust water spray oil leaks or any other type of condensation is present.
  • Includes TEFC motor seal-tight conduit and connectors NEMA 4/12 O/C/S push-button station NEMA 4/12 control box
  • If operator is monitored this modification will upgrade the photoeyes to NEMA4 as well
SSZP24

Solid Shaft 1" Keyed Zinc Plated 24'

RBH751L5-RH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation ManualManuel d'InstallationSell sheet
DT-312

Linear 1-btn Delta3 Transmitter 312 MHz *No Longer Available*

  • Activates one Delta-3 receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 (set by dip switches)
  • RF frequency: 312 MHz
    • .......more details
Programming Instructions
75424

Marantec Universal Receiver / Remote Kit 315 MHz

  • Universal receiver kit includes one plug-in radio receiver and one M3-2312 remote control transmitter
  • Universal receiver plugs directly into the wall outlet
  • Same as part # 73870
  • Made in Germany
Installation InstructionsProgramming Instructions
36163R

Genie Dual Frequency Intellicode Receiver 315 MHz & 390 MHz

  • For Genie Intellicode Rolling Code remotes Or Overhead Door Code Dodger remotes using the 315 or 390MHz frequency.
  • 24-Volt 3-Wire Connection For Garage Door Opener And Gate Openers.
  • Accepts Up To 8 Genie Intellicode Or Overhead Door Code Dodger remotes on 315 or 390MHz Frequency. Note: Will not work with the older code switch type of remotes.
PRO-HHD-5011R-R

Micanan 1/2HP 115V 1P Heavy-Duty Jackshaft with Mechanical Contactor Right Hand (PRO HHDR)

  • 1/2 HP 115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Electro-Mechanical Control Circuit (non-circuit board model)
  • 3-btn open/stop/close (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • Emergency chain hoist with electrical cut-off for manual operation
    • .......more details
Installation manualSpecification sheet
LOOPDETLM

Liftmaster Plug-in Loop Detector for Liftmaster gate operators

  • Plug-in Loop detector for CSW24V CSL24V AND LA500
  • Includes diagnostic and test feature
  • 12VDC/3mA power draw
  • For exit interrupt or shadow loop applications
  • Activates only when a vehicle passes over a loop
  • 8 sensitivity levels plus boost to ensure that vehicles are easily identified
    • .......more details
Installation Manual
MB-02202

Micanan Electric Motor Only 3/4HP 575V 3PH

  • Base mount motor fits: T TB APT J EJ H EHJ HHD SD GO MSW
BK100

Spring Anchor Bracket Mini USA Sold Individually

  • Adjustable residential center bracket
  • Bright zinc plated 12 gauge steel
  • Adjustable bearing plate
  • For 1-3/4" to 2-5/8" ID springs (Adjustable center line 2-3/8" to 4-1/4")
  • For use with steel or nylon bearings
  • Bearings NOT included
    • .......more details
27096A

Genie Drive Gear *** To Extent of Inventory

  • Gear for Genie Chain Glide PMX Series and PCG Series
  • 3-1/2 inch diameter nylon gear with square center hole
  • Square center hole is 7/16"
MGT

Linear MegaCode Gate Safety Edge Transmitter 318 MHz (DNT00068)

  • The MGT is the industry’s only fully supervised gate safety edge transmitter.
  • It automatically sends an hourly status report to the access controller indicating battery condition and if the transmitter is operational.
  • Should the edge sensor be disconnected shorted or tampered with the MGT will report a trouble condition.
  • Features Include:
  • Signals access controller for stop or reverse when safety edge activates
  • No cables or coiled wires
    • .......more details
Programming Instructions
V300-TS

Top Seal Weather Strip 100 ft per Roll

  • For use with bottom retainers installed on top of door.
  • Vinyl: Black
15-50B18QGH

Sprocket 18 Teeth 1-1/4" Bore 1/4" Keyway

655202

LiftMaster Pneumatic 14' Sensing Edge with 2-Wire Take-Up Reel

MS00003

Micanan Carriage for PRO-APT / T

  • For model PRO-APT / T
SEL2641R433-I

Erone 2-Relay Stand Alone Receiver 433MHz

  • Up to 85 transmitter keys
  • 1 NO relay + 1 NO/NC relay (24VA)
  • Self-learning memorization
  • Standard pulse output relay
  • Power requirements: 12/24Vac/dc
  • Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)
    • .......more details
Instruction ManualSell SheetBrochureWireless System Chart
GREASE

Gear and Rail Grease 3/4 oz Tube *** No Longer Available

  • A low temperature lithium based grease
  • To avoid tooth wear premature failure and temperature rise caused by friction by promoting sliding between teeth
888LM

LiftMaster MyQ Control Panel with TTC Sec+ 2.0 *No Longer Available*

  • Works with ANY Liftmaster Sears Chamberlain Access Master Master Mechanic Formula I True Value True Guard and Raynor Garage Door Opener Manufactured after 1998 using a amber / orange yellow or purple learn button.
  • Replaces existing control panel
  • Simple programming of new MyQ accessories and Security+ 2.0 remote controls and keyless entry products
  • Motion-activated opener light control
  • Adjustable light timer option
  • Lock feature
    • .......more details
Installation ManualManuel d'InstallationSell Sheet
485LMC

LiftMaster Battery for Integrated BBU Units

  • For use in Liftmaster 8550 8500W 3850 and 8360 models
  • 12V 4.5 AMP
  • Same as Part # 41A6357-1 41A5948
  • Battery back-up good for 20 cycles
Installation ManualManuel d'Installation
10FT-RAIL-BELT

LiftMaster 10' belt drive rail 2770BD - colour code: Blue

  • Price reflects cost if purchased with an opener
355LMC

LiftMaster Universal Radio Control Receiver 315 MHz **NLA

  • Over 100 billion possible codes makes it impossible to duplicate the frequency
  • Jumper option for momentary or constant relay contact
  • Specifically for use with most 3-wire systems without a transformer
  • Accepts up to 8 Security+ remote control codes and one keyless entry
  • Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the purple learn button (ERT format)
  • Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required
    • .......more details
Programming InstructionsInstructions de programmation
AW-14

Miller Edge Air Wave Switch in ABS Box

  • Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
  • Molded enclosure
  • Applications: commercial sectional doors rolling doors and mass transit
  • Works on doors up to 60ft
  • Can be used with standard pneumatic hose and Miller Edge extrusion
  • Sensitivity: 2mm to 500mm
    • .......more details
Instructions ManualSell Sheet
16-5L304

LiftMaster Cogged Vbelt 5L 30.4"

R-831-E

FL-Allstar 1-Door O/C/S Receiver 110554-311 MHz

  • Commercial Open/Stop/Close receiver for one door.
  • If your operator can be controlled by three button station then the R-831-E receiver and commercial remote controls will work with your operator.
  • It is easy to set with its learn feature (no coding switch).
  • This receiver can accept up to 8 different operational codes.
  • Manufacturer's model number: 190-110554
  • Dimensions: 6 1/4" x 3 5/8" x 1 3/4"
    • .......more details
Programming Instructions
41A4373A

LiftMaster Safety Sensor Kit 1993-1998 ** Replaced by 041-0136 & 041-0155-000

  • For LiftMaster Chamberlain & Sears openers built from 1993-1998
  • Kit includes: Saftey sensors 24" wire and gel connectors
  • Replacement: 041-0136 with the 041-0155-000 brackets
TRANSF143

Manaras Transformer 120/240-24V 40VA

  • Transformer 120-240V Primary 24V Secondary 40VA
BRAKEPART019

Manaras Brake Band Assembly (Standard Brake)

  • Replaces BRAKEPART017 SHOE008
  • To use on brake drums with edges (DRUM004)
  • New part number is BRAKEPART019KIT
Installation Manual
7145.96

Whiting Bottom Seal For Coldsaver 96" long

  • Aluminum retainer sold separately
MCT-11

Linear 1-btn MegaCode Transmitter 318 MHz

  • Activates one 318 MHz MegaCode receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Two CR2032 batteries included
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 3" W x 1.875" H x .625" D
    • .......more details
Programming Instructions
DT2A

Linear 2-btn Delta3 Transmitter 310 MHz (DNT00017A)

  • Activates two Delta-3 receivers independently
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
HAE00047

Linear Complete Gear Set with Grease

  • Set includes: Helical gear worm gears and grease
  • Helical gear measures 2-7/8" diameter
219110

Capacitor 1/2 HP 53-64 MFD 250V

  • For LDO50 only
26-40400

Truck Door Dual Durometer Side Seal 5/16" Track Spacing 114" Long for Whiting Dryfreight Doors

  • Allows for easy door operation.
  • Seal protects cargo area from dirt and moisture
  • Will not bunch up as bottom panel goes around top curve.
  • Co-extruded using rigid PVC backing with flexible PVC seal against the door.
  • For use with right angle vertical track
  • Fits only right angle vertical track assembly.
    • .......more details
DM4X8

Cable Drum Standard Lift 8' 400-8 Pair

  • 8' Standard Lift aluminum die cast alloy.
  • Pair includes: (1) LH and (1) RH Color coded: Red=LH and Black=RH
  • Max. Door Height: 8'-1".
  • Rated Lift per Drum: 265 lbs
  • Max. Cable Diameter: 1/8"
  • Mounting: 1" tube or solid shaft with 1/4" keyway
    • .......more details
D-TEK-LM

EMX Industries Plug-in Loop Detector for Liftmaster operators ** To extent of inventory

  • Plug-in Loop detector for SL575 SL585 SL595 BG770 BG 79024VAC
  • Works with most LiftMaster gate operators
  • Won't work with Elite Series Mega Arm Slide & Swing
  • Simply plug it into the harness already in the operator
  • Loop lead-in wires connect to operator terminal strip
  • Gold plated control contacts
    • .......more details
Installation ManualSell Sheet
ZZ36767890

Rolling Service Door MDL 922 22-Ga 8' x 8'

  • Standard Max Width 14 ft
  • Standard Max Height 14 ft
  • Steel aluminum or stainless steel construction
  • Flat or curved slats available
  • Wind load 20 PSF standard; options up to 31 PSF
  • Non-Insulated
    • .......more details
V-101-B

Vinyl Black Sold per Foot

  • Vinyl for 101-ALUM
SF514U-114

Spring Fitting 5-1/4" Pair for 1-1/4" shaft

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding 1-1/4"bore & (1) stationary 1" bore.
KP-680-ETL

Koala Air Blower 1/2 HP *** Indef. Delivery

  • Powerful extra quiet and energy efficient 1/2 HP motor
  • 115V / 1 Speed
  • Durable super lightweight and compact Polypropylene housing design
  • ETL/CETL Safety Certified
CABLE-NR-18-SS

Cable No Roll 1/8" 19x7 Stainless Steel T302-04 500ft

  • 19X7 SS T302 1/8” Rotation-Resistant Wire Rope was conceived for overhead cranes but manufactured specifically for high-performance garage doors.
  • A spin-resistant construction coupled with the corrosion-resistance of stainless steel is the perfect mix of resilience and performance for high-traffic areas.
  • Minimum break strength of 1700lbs
PULL-CHAIN-ASSY

Pull Chain Spring and Chain Assembly 13' & 14' Doors

  • Used with a hand chain for full vertical doors.
  • Eliminates the need for leaf bumpers
  • Chain can be adjusted for smaller doors
F400-1

FAAC 400 Hydraulic Swing Gate Operator Kit 115V dual swing gate

  • Kit includes: 2 FAAC operators 2 internal stops 1 control board 1 enclosure 1 photocell pair 2 copacitors 1 transmitter and 1 receiver
  • Max Gate Length: 16
  • Max Gate Length w/ External Lock: 23
  • Maximum Force Output: 1740
  • Duty: Continuous
  • Cycles Per Hour: 80
    • .......more details
6X42PO50

Devanco Loop 6' x 42' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
41AB050-2

LiftMaster Electronic Circuit Board Assembly

  • Assembly includes: Logic board end panel and light sockets
  • For belt drive models with 2-lights
  • Also known as 41AB050-2M
ACT-34B

Linear 4-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Supplied with quick-disconnect key ring
  • Power: Two CR2016 batteries incl.
  • Codes: Factory block coded in MegaCode format
  • RF frequency: 318 MHz
  • Dimensions: 1.25" W x 2.25" H x .48" D
    • .......more details
Programming Instructions
2KW

Rolling Steel 2" Curved Continuous Windlock

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
828LM

LiftMaster Internet Gateway Sec+ 2.0

  • Monitor and control your garage door opener from anywhere in the world right from your smartphone or computer
  • Easy and fast installation through your in home router.
  • Only works with new MyQ compatible Garage door openers
  • Controls up to 16 garage doors gate operators or MyQ-Enabled devices.
Programming InstructionsInstructions de programmationSell SheetBrochure
41522R.S

Genie Optical Encoder (RPM Sensor) Belt/Chain Drive

  • Compatible with these Genie models that have RIDE motors (see below): 1028 1028H 2028 2028H
PPK3PHM

LiftMaster Passport MAX 3-Button Keychain Remote w/Proximity Sensor

  • Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufacture since January 1995
  • 3-button keychain remote with proximity sensor
  • 2x the range of standard remote controls
  • Narrow-band transmission
OSHW-6112-M-N4-R

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
    • .......more details
R2T

Erone Radium Mini 2-Button Transmitter 433MHz

  • The RADIUM remotes are compatible with all standard 433 MHz RADIUM wireless receivers.
  • They have been designed with a high security coding system (KeeLoq® Hopping code).
  • A special algorithm ensures a continuous synchronization between the receiver and transmitter
  • Range up to 820 ft (250 m)
  • Two CR2016 batteries included
Wireless System Chart
S3HD-2

Coaxial Splitter 2-Way Female to Female Type F

  • A practical and efficient solution for dividing a signal from a coaxial source into two separate channels
  • Its careful design helps minimize signal losses thus ensuring optimal quality on each output
  • Frequency: 5 - 3000 MHz
  • Special order item price may vary depending on availability.
XF600VAC12

LiftMaster 600V Transformer Kit 1200

  • For use with various LiftMaster® MAXUM Series DC 1200 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators
  • will supply a maximum of 12.5 amps on 120volts
OPH-6212-M-N1-RH

Manaras Opera-H 1/2HP 240V 1Ph with Monitored Board and N1 Photoeyes

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
SB3381-PAIR

Garex End Bearing Plate 3-3/8" - 1" Commercial Sold as a Pair

CHAINTENSDC

LiftMaster Chain Tensioner 1" MAXUM DC

  • For use with various LiftMaster® MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators; manufactured after 2023 only.
  • Spreader for Maxum operators and 1" door shaft
DCWALLCTL

LiftMaster Floor Level Wall Controller with LCD Display

  • Compatible with LiftMaster MAXUM Commercial Door Operators.
  • 4-line LCD display gives you access to more information at all times
  • Bringing programming troubleshooting and Diagnostics down to the floor level will save you time and money
  • Menu based user interface allows you to scroll through edit and save options and settings easily.
  • Dimensions: 3.586” W x 8.166” H x 1.732” D
HRD-288-1

EMX Universal Mounting Bracket L-Shape Black Sold per Piece

  • Fits RET2 MON2 4X2 WEL-RX REFLECTOR-O-EX models
EXT-HDWR-BOX-7/8

Installation Box for Extension Springs for 7' & 8' Doors

  • Installation Hardware includes 3" sheaves sheave strap cables safety cable fasteners
OPH-6533-M-N1-RH

Manaras Opera-H 3/4HP 600V 3Ph with Monitored ECB and N1 Photoeyes RH

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
202-0019

TNR Bottom Bar Arm Black Harness 75D ** Price by Quote Only

  • same as 2622126
041D0239-1

LiftMaster End Panel Replacement Kit

  • For use with various LiftMaster® and Chamberlain® 1/2 HP WiFi® Chain Drive and Belt Drive Garage Door Openers
DS-REPAIR-KIT

Inflatable Dock Seal Patch 30" x 30" Vinyl with Glue

LVB420-11/P1

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
Specification Sheet
FAAC-844-115V

FAAC 844 Slide Gate Operator 115V

  • The FAAC Model 844 automated system for sliding gates is an electro-mechanical operator transmitting motion to the sliding leaf via a rack or chain pinion appropriately coupled to the gate
  • The non-reversing system ensures the gate is mechanically locked when the motor is not operating and therefore no lock needs to be installed
  • Control Board: model 780D
050ACTBMC

LiftMaster Receiver Logic Board AC WiFi

  • 050ACTBMC is a replacement Bluetooth® Enabled Receiver Logic Board Kit
  • For use with various LiftMaster® and Chamberlain® Wi-Fi® AC Belt Drive and Chain Drive Garage Door Openers manufactured 2011 to 2022 only.
  • The unit will feature a yellow learn button
  • Also known as: 1D8088-1 050ACTWFMC 050ACTWF 1D8808-3 041D80881D8088-1 50ACTWF 050ACTBMC 50ACBL1 50ACBL2 50ACBL3 50ACBL4 50ACBL5 50ACCL1 50ACCL2 50ACCL3 50ACCL4 50ACCL5 50ACBR1 50ACBR2 50ACBR3 50ACBR4 50ACBR5 50ACCR1 50ACCR2 50ACCR3 50ACCR4 50ACCR5
TS200-TOP/INTERM

ODCC Repl. Panel Top or Intermediate Section ** Color and Size to be Specified. Price by Quote Only

  • Special order item
HA-434TL

SkyLink Wireless Motion Sensor

  • Supervised Sensor: monitors the sensors and their battery condition automatically
  • Motion detecting range: 40 feet.
  • Operating range: Up to 800 feet.
  • Easy to set up (Battery not included).
  • FCC/IC approved.
  • Sensors are weatherproof but not waterproof. Sheltering it from the elements is recommended
    • .......more details
K32-11010

LiftMaster Gear Reducer 44:1 1-1/2-2 HP

  • Replacement Kit. Compatible with 1HP 1/2HP & 2HP LiftMaster® GH Model Commercial Door Operators
  • Also known as: 32-11010 3211010
SA1929/A19

Automatic Systems Retrofit Logic Board with Drive for BL229 Board and Double Channel Loop Detector

  • Retrofit Assembly for the BL229 board this includes the new logic board with the drive.
  • Comes with E/BLOP/371 which are the loop detectors that go with that board. (no cost for the moment)
312964

ODCC Adjusting Wheel 8" OD 1" Bore

MA010

LiftMaster Gate Arm Bracket

  • Designed for use on all Mega Arm gate openers
  • Bracket will work with either right-hand or left-hand operation gate arm.
02-515

LiftMaster Panic Release Device

SPR41B18X1

Sprocket 41B18 1" Shaft 1/4" keyway

  • Same as MD-00145
PS-20A

Miller Edge Pneumatic Air Switch in ABS Enclosure

  • Pneumatic switch offering a reliable low cost alternative to a standard electric sensing adge.
  • When attached to a hose inserted into the existing weather stripping the PS-20A acts as an effective sensing edge on doors up to 18ft in length.
  • Applications: rolling doors sectional doors and mass transit.
  • Electrical configuration: 3-wire SPDT
  • Temperature range: -20F to 158F
  • Max pressure: 20 PSI
    • .......more details
7500-FS-GALV

Fire Shutter Hot-Dipped Galv Interlocking Slats Made-to-Order

  • Shutters can be up to 13'- 6 inches wide and 12 feet tall with UL labels Class A B or C while still being able to function as normal counter rolling shutters.
  • Oversized fire shutters can be manufactured up to 20 feet wide
  • Model 7500 fire shutters can be installed with either a manual lift external motors a hand crank with or without automatic testing tubular models with the option of automatic testing
  • Along with UL labels that will automatically close the fire shutters for either 3 1½ or ¾ hours the fire shutters can also be manufactured with smoke protection
  • Available finishes: Hot-dipped galvanized steel with an optional baked-on gray polyester enamel coating or 304 stainless steel with a number 4 finish flat profile
  • The viscous speed governor can be set to automatically close the fire shutters at speeds of 6 inches per second up to 24 inches per second complying with NFPA 80 specifications.
    • .......more details
MOD007

Manaras Reverse Limits

  • Necessary feature when the opening and closing of the door corresponds to a different rotational direction than the operator
BEA-10-LBA

BEA LZR Metal Bracket Accessory

  • Mounting bracket only for the LZR industrial sensors including: LZR-I30 LZR-S600 LZR-H100 LZR-U920/U921
Installation Guide
20FT-TROLLEY-SET

LiftMaster 20ft Double Angle Rail Set for Comm. Trolley Ops (2 pcs)

  • Double Angle Rails for doors up to 20' high
  • Works with models : MT T GT APT
  • Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
FORK002-LH

Manaras Disconnect Fork Left hand

EXA-1000

Linear Omni-Directional Remote Antenna (AAE00198)

  • The EXA-1000 is a 1/2 wave center fed vertical antenna composed of three parts: an Antenna assembly with an F connector attachment; a Base Plate assembly with radial mounting provisions; and a five-foot 75-ohm coaxial cable.
  • The cable connects to the antenna base on one end and the receivers F connector on the other.
  • If the antenna must be mounted further than five feet from the receiver an extension cable of up to a maximum of 25 feet may be used instead of the five foot cable supplied.
  • Because of the cable resistance the performance of the EXA-1000 may be degraded by using longer than a 25 foot cable
  • Compatible with all Linear receivers with Type F antenna connector
  • Receives signals in 288 to 320 MHz range
    • .......more details
Installation manual
GUK-BK

Genie Universal Wireless Keypad 41249R

  • Works with most major brand garage door openers. Compatible with Genie Intellicode (rolling code) Genie 12 and 9 switch systems going back to 1988.
  • Also compatible with Overhead Door Chamberlain Craftsman LiftMaster Wayne Dalton Linear Megacode Xtreme Garage Ryobi Sommer and Marantec. •With the Genie Universal Keypad you can control a combination of up to 3 different garage door openers. Each of the 3 openers can be programmed individually of the others so having multiple brands of openers controlled by a single keypad is not a problem.
  • Powered by two triple-A batteries (AAA)
MO00034

Micanan Brake Compression Spring (5/16" ID)

MA005

LiftMaster Gear Reducer 60:1

  • Replacement Gear Box (60:1).
  • Compatible with LiftMaster MADCBB MATDCBB MASTDCBB
MEL-II-TX10

Miller Edge Monitored Edge Link-II Transmitter

  • Miller Edge Monitored Edge Link II TRANSMITTER ONLY
  • Monitors the presence and function of any 10K (T2) monitored sensing edge
  • Provides a monitored wireless signal transmission from the sensor to the operator controls
  • Improved immunity to RF interference with 916 MHz operating frequency
  • Eliminates visible coil cords and retracting reels
  • Saves installation time
    • .......more details
CP-BR-ASSY-115V

Lynx Brake Kit with 115V Solenoid CDJH

  • Complete brake kit with solenoid
ON4E/A

NICE Apollo Era One 4-Channel Transmitter w/Visor Clip 433 Mhz

  • Unlock your gate with the new Era One!
  • A 433.92 MHz rolling code transmitter with management of identity codes and certificates it is self-learning with a built-in proximity receiver.
  • With 72 bit O-Code encoding it is also compatible with Nice Flor encoding receivers.
  • If you've ever been frustrated programming remote controls have no fear! By using a transmitter already programmed to the receiver it memorizes the data via an enabling code between the two making programming a simple process
  • The Era One uses data processing and recognition systems that increase its degree of security delivering a threefold reduction in automation response time. Attach the Era One transmitter to your keys or fix it to your car visor with the included visor clip.
  • Estimated Range: Outdoors: 656 ft Inside Building: 115 ft
    • .......more details
CDJH-34-115-CON-R

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V Contactor Right Hand

  • 3 Button station (NEMA 1)
  • 1650 RPM high starting torque motor with overload protection
  • Inherent Mechanical Brake (I.M.B)
  • B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
  • On board Open Close & Stop for ease of setting limits
  • Pre-wired to accept sensing devices
    • .......more details
65-92131

LiftMaster Dual Aux Trolley Mod. M15 #41 Chain for 12ft High Door

  • Provides drawbar-type operation on very wide (over 22 ft) standard lift sectional doors where a side-mount op. is preferred over a drawbar op.
  • Includes up to 12ft of tracks
  • For H/J/GH